- 23 Apr, 2013 6 commits
-
-
Rafał Miłecki authored
Signed-off-by:Rafał Miłecki <zajec5@gmail.com>
-
Rafał Miłecki authored
In MMIO dumps of ndiswrapper there are following PHY ops: phy_read(0x0118) -> 0x013d phy_read(0x01ed) -> 0x993d phy_read(0x0119) -> 0x012f phy_read(0x01ee) -> 0x992f phy_read(0x011a) -> 0x0139 phy_read(0x0969) -> 0x9939 It matches the code of wlc_phy_txpower_est_power_nphy (from brcm80211), so we know the registers meaning. Signed-off-by: -
Rafał Miłecki authored
After b43_phy_ht_tx_power_ctl_setup there are some extra radio ops: radio_read(0x08bf) -> 0x0001 radio_write(0x08bf) <- 0x0001 radio_write(0x0159) <- 0x0011 On N-PHY we write 0x11 to TSSI regs, so it's probably sth similar. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by: -
Rafał Miłecki authored
Now when we know many radio regs at 0x000 are core-generic, I've noticed we duplicate some values in the tables. Signed-off-by: -
Rafał Miłecki authored
After comparing writes to registers at 0x000, 0x400 and 0x800 it seems there are many very similar writes. So 0x000 offset is not for accessing something totally different, but probably just the first out of three cores. Signed-off-by:
-
- 22 Apr, 2013 34 commits
-
-
Bing Zhao authored
Initialization of bss_descriptor is unnecessary as the entire structure will be overwritten by a memcpy followed by. Initialize disable_11ac flag properly by setting it to true in mwifiex_fill_new_bss_desc(). Reported-by:
Doug Anderson <dianders@chromium.org> Reviewed-by:
Paul Stewart <pstew@chromium.org> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
beacon_ie buffer is allocated in mwifiex_fill_new_bss_desc() and the buffer pointer is saved in bss_desc->beacon_buf. beacon_ie is freed before the function returns. However, bss_desc->beacon_buf is still being accessed afterwards. Fix it by freeing beacon_ie (bss_desc->beacon_buf) in caller's scope. Reviewed-by:
-
Bing Zhao authored
We have blocked association attempts on interfaces configured in AP and AD-HOC modes. P2P mode should be blocked too. Furthermore, an error code must be returned if we are unable to associate. Signed-off-by:
-
Bing Zhao authored
Use msecs_to_jiffies() wherever possible. Signed-off-by:
-
Bing Zhao authored
priv->bss_mode uses NL80211_IFTYPE_* definitions. HostCmd_BSS_MODE_IBSS is used in ad-hoc start/join command between driver and firmware. Coincidentally both HostCmd_BSS_MODE_IBSS and NL80211_IFTYPE_STATION are defined as 2. That explains why nobody complained. Signed-off-by:
-
Avinash Patil authored
There is a typo in mwifiex_cleanup_rxq_ring() which uses PCI_DMA_TODEVICE while unmapping PCI memory. We should actually use PCI_DMA_FROMDEVICE. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Bing Zhao authored
Send P2P_MODE_CFG cmd to firmware when p2p interface is created. Without proper p2p configuration firmware may behave incorrectly while handling commands sent through this interface. Signed-off-by:
Stone Piao <piaoyun@marvell.com> Signed-off-by:
-
Paul Stewart authored
p2p devices should identify themselves as such to userspace at startup, so the connection manager can decide which interface to start wpa_supplicant instances on. Signed-off-by:
-
Joe Perches authored
Reduce object space ~2% using more current logging styles. Neaten and simplify logging macros. Use wiphy_<level> where appropriate. Coalesce formats. Convert ERROR/WARNING/INFO macros to rt2x00_<level> Convert EEPROM to rt2x00_eeprom_dbg Convert PROBE_ERROR to rt2x00_probe_err Convert DEBUG to rt2x00_dbg Convert EEPROM to rt2x00_eeprom_dbg $ size drivers/net/wireless/rt2x00/built-in.o* text data bss dec hex filename 245639 71696 69584 386919 5e767 drivers/net/wireless/rt2x00/built-in.o.new 240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.nodyndbg 240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.no_rt2x00_debug 249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old 249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old.nodyndbg 244222 70096 69712 384030 5dc1e drivers/net/wireless/rt2x00/built-in.o.old.no_rt2x00_debug Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Gabor Juhos authored
The function is used for BBP register initialization, fix the typo in the function name to reflect that. The patch contains no functional changes. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Acked-by:
-
Wei Yongjun authored
The dereference to 'ifp' in debug code should be moved below the NULL test. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Vladimir Kondratiev authored
Helpers to fetch various fields from the Rx descriptor Signed-off-by:
Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by:
-
Vladimir Kondratiev authored
Original Tx descriptor stored is in non-cached area for DMA; copy it to the cached memory to speed-up access Signed-off-by:
-
Vladimir Kondratiev authored
vring size is known from the beginning, fill it immediately in the struct initializer This is minor optimization that reduces code size. Signed-off-by:
-
Vladimir Kondratiev authored
Rx descriptors stored in non-cacheable memory area for DMA. Non-cacheable memory causes long access time from CPU. Copy rx descriptor to the skb->cb, and use this copy. It provides faster memory access, and will be usefull to keep Rx information for later processing (BACK reorder) Signed-off-by:
-
Arend van Spriel authored
In the dequeue worker the function brcmf_commit_skb() is called. However, instead of increment the credit count upon success it should break the for loop upon failure. Otherwise, it will result in an endless loop. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
The function brcmf_rollback_toq() is already called in error path and its result should not override the initial error value. As the function releases the sk_buff there is no need to return anything so change return type to void. Reviewed-by:
-
Arend van Spriel authored
All rollback failures should result in freeing of the sk_buff by calling brcmf_txfinalize(). Reviewed-by:
-
Arend van Spriel authored
When deleting an interface in firmware-signalling module it will clear any destination descriptors. To avoid concurrency issues it should take the lock using brcmf_fws_lock(). Reviewed-by:
-
Arend van Spriel authored
Several firmware signals should be considered as opportunity to send packets to the firmware. This patch adds conditional scheduling of the dequeue worker thread while handling those signals. Reviewed-by:
-
Arend van Spriel authored
Firmware signals a destination is closed as well as an interface. A destination is associated with an interface. When an interface is closed consequently the destination should be considered closed as well. Reviewed-by:
-
Arend van Spriel authored
The function brcmu_pkt_free_skb() use skb->destructor to decide how the sk_buff should be freed. However, when running AP mode with iptables configured this results in a kernel warning. Reviewed-by:
Piotr Haber <phaber@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
In function brcmf_add_if() an error message is printed upon alloc_netdev() failure. The allocation failure itself spews enough info in the log so remove the error message. Reviewed-by:
-
Arend van Spriel authored
For P2P_DEVICE interface the struct brcmf_if instance is allocated using kzalloc() which can fail. Add pointer check and return -ENOMEM if it failed. Fixes the following smatch error: "drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c:770 brcmf_add_if() error: potential null dereference 'ifp'. (kzalloc returns null)" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
-
Arend van Spriel authored
The mask was only initialized for the first node, but it should be done for each node that is handled in the loop. Reviewed-by:
-
Stanislaw Gruszka authored
Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
Stanislaw Gruszka authored
On new 2800 hardware sizes of TXWI & RXIW can be different than TXD & RXD sizes, so we need to difference between them. Let's define winfo_size as size of in buffer descriptor (TXWI & RXWI), and desc_size of as size of additional descriptor - in separate DMA coherent buffer for PCI hardware (TXD & RXD) and yet another in buffer descriptor for USB hardware (TXINFO & RXINFO). Change is rt2x00 wild, but should affect only 2800 driver. Patch also fix beaconing for 5592usb AP mode. Signed-off-by:
-
Stanislaw Gruszka authored
This procedure is simple switch now and return no error any longer. Acked-by:
-
Stanislaw Gruszka authored
Signed-off-by:
-
Stanislaw Gruszka authored
Acked-by:
-
Stanislaw Gruszka authored
Acked-by:
-
Stanislaw Gruszka authored
Add procedure for both bands filter calibration and use it on individual chipset init rfcsr subroutines. Remove "Set back to initial state" code for 3290 since vendor driver DPO_RT3290_LinuxSTA_V2600_20120508 does not include it. Signed-off-by:
-
Stanislaw Gruszka authored
Acked-by:
-
Stanislaw Gruszka authored
Acked-by:
-
