- 03 Sep, 2016 20 commits
-
-
Amitkumar Karwar authored
This patch adds command preparation and response handling for CHAN_REGION_CFG command. These changes are prerequisites for adding custom regulatory domain support. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
AID gets updated during TDLS setup, but modified value isn't reflected in "priv->assoc_rsp_buf". This causes TDLS setup failure. The problem is fixed here. Fixes: 4aff53ef ("mwifiex: parsing aid while receiving..") Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Christophe Jaillet authored
This patch should be a no-op. It just simplifies code by using the name of a variable instead of its type when calling 'sizeof'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Christophe Jaillet authored
In 'mwifiex_get_ver_ext', we have: struct mwifiex_ver_ext ver_ext; memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext)); This is likely that memset'ing sizeof(struct mwifiex_ver_ext) was expected. Remove the ambiguity by using the variable name directly instead of its type. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Heinrich Schuchardt authored
If sta == NULL, the changed line will not be reached. So no need to check that sta != NULL here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Sergey Ryazanov authored
EEPROM size calculated in 16-bit words, so we should take into account this fact during buffer allocation. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Pavel Andrianov authored
Likely wl3501_reset should acquire spinlock as wl3501_{open, close}. One of calls of wl3501_reset has been already protected. The others were unprotected and might lead to a race condition. The patch adds spinlock into the wl3501_reset and removes it from wl3501_tx_timeout. Found by Linux Driver Verification project (linuxtesting.org) Signed-off-by: Pavel Andrianov <andrianov@ispras.ru> Acked-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Heinrich Schuchardt authored
We are using mac as source address in a memcpy. In the lines below we can assume mac is not NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Heinrich Schuchardt authored
for_each_property_of_node is only executed if the property prop is not NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Rafał Miłecki authored
BCM53573 seems to be the first series of Northstar family with wireless on the chip. The base models are BCM53573-s (A0, A1) and there is also BCM47189B0 which seems to be some small modification. The only problem with these chipsets seems to be watchdog. It's totally unavailable on 53573A0 / 53573A1 and preferable PMU watchdog is broken on 53573B0 / 53573B1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Ganapathi Bhat authored
It's been observed that firmware sends RADAR detected event without specifying bss_num/bss_type. Also, the event body is empty. Currently the event is being ignored by driver. This patch checks on which interface 11H is active, accordingly fills bss_num/bss_type and handles the event. Condition "if (le32_to_cpu(rdr_event->passed))" which always fails is also removed. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
This patch adds HT support for adhoc station. Firmware will upload ibss sta connect event with beacon data, whenever new station joins the adhoc network. Driver will check the HT IE and decide whether to support HT aggreagation or not. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Amitkumar Karwar authored
Disconnect message in mwifiex_reset_connect_state() would displays necessary information. We unnecessarily have exactly same message in cfg80211_disconnect(). As priv->cfg_bssid is cleared at this point of time, it prints incorrect(all zero) MAC. This message is removed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Xinming Hu authored
Firmware may filter and drop packets under certain condition, for example, ARP SA=DA packet. this event will be used to synchronize the Rx Block Acknowledgment (BA) window bitmap and to fill any holes in driver side. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Ganapathi Bhat authored
This patch advertises RANDOM_MAC_ADDR feature to cfg80211. It allow the application to issue scan with a MAC address and mask. Random MACs are generated and used in probe requests sent for scanning until it is changed by the application or device is restarted. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Amitkumar Karwar authored
Recent patch "mwifiex: fix NULL pointer" skips extended scan event handling when suspend is in progress. It created a problem for scan after interface disabled/enabled case. This patch solves the problem by checking netif_running() status. Fixes:16d25da9 ("mwifiex: fix NULL pointer dereference during suspend") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Karthik D A authored
region code is an EEPROM setting received from firmware. Let's display this in debugfs along with other information. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Karthik D A authored
The driver sends and recives information to and from the firmware. Correct endianness should be ensured as firmware follows little endian format and host can be little/big endian. Signed-off-by: Karthik D A <karthida@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/wireless/ti/wlcore/spi.c:87:34: warning: symbol 'wilink_data' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
Rajan Vaja authored
Fix coccicheck warning which recommends to use memdup_user() instead of reimplementing its code. This patch fixes below coccicheck warnings: drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3044:9-16: WARNING opportunity for memdup_user drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3806:9-16: WARNING opportunity for memdup_user Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
- 01 Sep, 2016 1 commit
-
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2016-08-30-2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * Preparation for new HW continues; * Some DQA improvements; * Support for GMAC;
-
- 30 Aug, 2016 13 commits
-
-
Sara Sharon authored
If device family is 8000 then iwl_pcie_load_cpu_sections() won't be called at all (iwl_pcie_load_cpu_sections_8000() is called in that case) so this piece of code never gets called. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Sara Sharon authored
Turns out we should access TFH relative addresses. Also, the FH_UCODE_LOAD_STATUS was replaced by UREG_UCODE_LOAD_STATUS. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Sara Sharon authored
Up till now we accessed SCD configuration only for initial configuration and for enabling command queue. For a000 generation the command queue is open by default and firmware configures the rest. No driver SCD accesses are expected. Make sure this is the case. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Oren Givon authored
Add a new config struct for the new 9170 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Oren Givon authored
Add a new config struct for the new 9270 series and add the first PCI ID for it. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Oren Givon authored
Add 4 more new 9460 series PCI IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Oren Givon authored
Add a new series to the 9000 series called 9460. In addition, add a new PCI ID that is the 9460 new series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Oren Givon authored
Rename and reorder the 9000 series configuration structs: - struct containing configuration of 5165 was renamed to 9000. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Liad Kaufman authored
Every active TXQ is assigned to a TID given through the SCD_CONFIG_CMD, and acts as an identifier in the FW. However, there may be cases this ownership needs to be changed. For example, in the following scenario: 1. TID x is owner of a queue 2. Due to a shortage of queues, TID y and z share with x 3. TID x becomes inactive and needs to be removed from the shared queue. In this scenario, if another queue is freed and traffic on x continues, we can't allocate it a new queue as long as it is the owner of the first queue. Support moving ownership of a TXQ to a different TID (same STA) without stopping the queue. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Liad Kaufman authored
Due to the addition of another option in the SCD_CONFIG_CMD's %enable field, change the assignment of this field to use defines rather than hard-code the value itself. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Liad Kaufman authored
When working in DQA mode, if a queue is shared and a HW restart occurs, there might be a possible race condition between stations on the queues, and an existing queue might be left with no queues. To solve this, make sure in DQA mode to re-assign the same queues as before the HW restart. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Liad Kaufman authored
When sending the SCD_QUEUE_CONFIG command, the queue is associated to a specific TID. If later there is a need to use this TID on a different queue instead, it first needs to be unassociated from the first queue. Keep track for every queue what TID is associated with it. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Liad Kaufman authored
When a shared queue becomes unshared, aggregations should be re-enabled if they've existed before. Make sure that they do this, if required. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
- 29 Aug, 2016 3 commits
-
-
Sara Sharon authored
For a000 devices there is a support of 64 bit DMA addressing. The paging command was changed accordingly - support it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Ayala Beker authored
Add support for installing and removing GMAC key for newer FW versions that support GCM and MFP. GMAC provides authentication and integrity for multicast management frames. Firmware API was changed, update the driver accordingly. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
Sara Sharon authored
The 9000 hardware will de-aggregate AMSDUs. In the process it will copy the mac header "as is" to the new MPDUs. This means driver should allow the same PN for MPDUs originated from the same AMSDU. Do that by incrementing the PN only for the last MPDU in the sequence. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-
- 18 Aug, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Minor overlapping changes for both merge conflicts. Resolution work done by Stephen Rothwell was used as a reference. Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix Fietkau. 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme. 3) Fix some tg3 ethtool logic bugs, and one that would cause no interrupts to be generated when rx-coalescing is set to 0. From Satish Baddipadige and Siva Reddy Kallam. 4) QLCNIC mailbox corruption and napi budget handling fix from Manish Chopra. 5) Fix fib_trie logic when walking the trie during /proc/net/route output than can access a stale node pointer. From David Forster. 6) Several sctp_diag fixes from Phil Sutter. 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel. 8) Checksum fixup fixes in bpf from Daniel Borkmann. 9) Memork leaks in nfnetlink, from Liping Zhang. 10) Use after free in rxrpc, from David Howells. 11) Use after free in new skb_array code of macvtap driver, from Jason Wang. 12) Calipso resource leak, from Colin Ian King. 13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang. 14) Fix bpf non-linear packet write helpers, from Daniel Borkmann. 15) Fix lockdep splats in macsec, from Sabrina Dubroca. 16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF handling. 17) Various tc-action bug fixes, from CONG Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net_sched: allow flushing tc police actions net_sched: unify the init logic for act_police net_sched: convert tcf_exts from list to pointer array net_sched: move tc offload macros to pkt_cls.h net_sched: fix a typo in tc_for_each_action() net_sched: remove an unnecessary list_del() net_sched: remove the leftover cleanup_a() mlxsw: spectrum: Allow packets to be trapped from any PG mlxsw: spectrum: Unmap 802.1Q FID before destroying it mlxsw: spectrum: Add missing rollbacks in error path mlxsw: reg: Fix missing op field fill-up mlxsw: spectrum: Trap loop-backed packets mlxsw: spectrum: Add missing packet traps mlxsw: spectrum: Mark port as active before registering it mlxsw: spectrum: Create PVID vPort before registering netdevice mlxsw: spectrum: Remove redundant errors from the code mlxsw: spectrum: Don't return upon error in removal path i40e: check for and deal with non-contiguous TCs ixgbe: Re-enable ability to toggle VLAN filtering ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths ...
-
- 17 Aug, 2016 1 commit
-
-
David S. Miller authored
Tom Herbert says: ==================== strp: Stream parser for messages This patch set introduces a utility for parsing application layer protocol messages in a TCP stream. This is a generalization of the mechanism implemented of Kernel Connection Multiplexor. This patch set adapts KCM to use the strparser. We expect that kTLS can use this mechanism also. RDS would probably be another candidate to use a common stream parsing mechanism. The API includes a context structure, a set of callbacks, utility functions, and a data ready function. The callbacks include a parse_msg function that is called to perform parsing (e.g. BPF parsing in case of KCM), and a rcv_msg function that is called when a full message has been completed. For strparser we specify the return codes from the parser to allow the backend to indicate that control of the socket should be transferred back to userspace to handle some exceptions in the stream: The return values are: >0 : indicates length of successfully parsed message 0 : indicates more data must be received to parse the message -ESTRPIPE : current message should not be processed by the kernel, return control of the socket to userspace which can proceed to read the messages itself other < 0 : Error is parsing, give control back to userspace assuming that synchronization is lost and the stream is unrecoverable (application expected to close TCP socket) There is one issue I haven't been able to fully resolve. If parse_msg returns ESTRPIPE (wants control back to userspace) the parser may already have consumed some bytes of the message. There is no way to put bytes back into the TCP receive queue and tcp_read_sock does not allow an easy way to peek messages. In lieu of a better solution, we return ENODATA on the socket to indicate that the data stream is unrecoverable (application needs to close socket). This condition should only happen if an application layer message header is split across two skbuffs and parsing just the first skbuff wasn't sufficient to determine the that transfer to userspace is needed. This patch set contains: - strparser implementation - changes to kcm to use strparser - strparser.txt documentation v2: - Add copyright notice to C files - Remove GPL module license from strparser.c - Add report of rxpause v3: - Restore GPL module license - Use EXPORT_SYMBOL_GPL v4: - Removed unused function, changed another to be static as suggested by davem - Rewoked data_ready to be called from upper layer, no longer requires taking over socket data_ready callback as suggested by Lance Chao Tested: - Ran a KCM thrash test for 24 hours. No behavioral or performance differences observed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-