The spec says:
mtu only exists if VIRTIO_NET_F_MTU is set
The mac address field always exists (though
is only valid if VIRTIO_NET_F_MAC is set)

So vdpa_dev_net_config_fill() should read MTU and MAC
conditionally on the feature bits.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220929014555.112323-7-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit fixes spars warnings: cast to restricted __le16
in function vdpa_dev_net_mq_config_fill()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220929014555.112323-6-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa_dev_net_mq_config_fill() should checks device features
for MQ than driver features.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220929014555.112323-5-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio 1.2 spec says:
max_virtqueue_pairs only exists if VIRTIO_NET_F_MQ or
VIRTIO_NET_F_RSS is set.

So when reporint MQ to userspace, it should check both
VIRTIO_NET_F_MQ and VIRTIO_NET_F_RSS.

unused parameter struct vdpa_device *vdev is removed
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220929014555.112323-4-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit reports driver features to user space
only after FEATURES_OK is features negotiation is done.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220929014555.112323-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This commit adds a new vDPA netlink attribution
VDPA_ATTR_VDPA_DEV_SUPPORTED_FEATURES. Userspace can query
features of vDPA devices through this new attr.

This commit invokes vdpa_config_ops.get_config()
rather than vdpa_get_config_unlocked() to read
the device config spcae, so no races in
vdpa_set_features_unlocked()

Userspace tool iproute2 example:
$ vdpa dev config show vdpa0
vdpa0: mac 00:e8:ca:11:be:05 link up link_announce false max_vq_pairs 4 mtu 1500
  negotiated_features MRG_RXBUF CTRL_VQ MQ VERSION_1 ACCESS_PLATFORM
  dev_features MTU MAC MRG_RXBUF CTRL_VQ MQ ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20220929014555.112323-2-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Support for the VIRTIO_BLK_F_SECURE_ERASE VirtIO feature.

A device that offers this feature can receive VIRTIO_BLK_T_SECURE_ERASE
commands.

A device which supports this feature has the following fields in the
virtio config:

- max_secure_erase_sectors
- max_secure_erase_seg
- secure_erase_sector_alignment

max_secure_erase_sectors and secure_erase_sector_alignment are expressed
in 512-byte units.

Every secure erase command has the following fields:

- sectors: The starting offset in 512-byte units.
- num_sectors: The number of sectors.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20220921082729.2516779-1-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

This patch allows the device features to be provisioned via
netlink. This is done by:

1) validating the provisioned features to be a subset of the parent
   features.
2) clearing the features that is not wanted by the userspace

For example:

# vdpa mgmtdev show
pci/0000:02:00.0:
  supported_classes net
  max_supported_vqs 3
  dev_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC GUEST_TSO4
  GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6 HOST_ECN HOST_UFO
  MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN CTRL_RX_EXTRA
  GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
  VERSION_1 ACCESS_PLATFORM

1) provision vDPA device with all features that are supported by the virtio-pci

# vdpa dev add name dev1 mgmtdev pci/0000:02:00.0
# vdpa dev config show
dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
  negotiated_features CSUM GUEST_CSUM CTRL_GUEST_OFFLOADS MAC
  GUEST_TSO4 GUEST_TSO6 GUEST_ECN GUEST_UFO HOST_TSO4 HOST_TSO6
  HOST_ECN HOST_UFO MRG_RXBUF STATUS CTRL_VQ CTRL_RX CTRL_VLAN
  GUEST_ANNOUNCE CTRL_MAC_ADDR RING_INDIRECT_DESC RING_EVENT_IDX
  VERSION_1 ACCESS_PLATFORM

2) provision vDPA device with a subset of the features

# vdpa dev add name dev1 mgmtdev pci/0000:02:00.0 device_features 0x300020000
# dev1: mac 52:54:00:12:34:56 link up link_announce false mtu 65535
  negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-4-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

This patch implements features provisioning for vdpa_sim_net.

1) validating the provisioned features to be a subset of the parent
   features.
2) clearing the features that is not wanted by the userspace

For example:

vdpasim_net:
  supported_classes net
  max_supported_vqs 3
  dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM

1) provision vDPA device with all features that are supported by the
   net simulator

dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
  negotiated_features MTU MAC CTRL_VQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM

2) provision vDPA device with a subset of the features

dev1: mac 00:00:00:00:00:00 link up link_announce false mtu 1500
  negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

This patch allows the device features to be provisioned through
netlink. A new attribute is introduced to allow the userspace to pass
a 64bit device features during device adding.

This provides several advantages:

- Allow to provision a subset of the features to ease the cross vendor
  live migration.
- Better debug-ability for vDPA framework and parent.
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220927074810.28627-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Currently add_recvbuf_big() allocates MAX_SKB_FRAGS segments for big
packets even when GUEST_* offloads are not present on the device.
However, if guest GSO is not supported, it would be sufficient to
allocate segments to cover just up the MTU size and no further.
Allocating the maximum amount of segments results in a large waste of
buffer space in the queue, which limits the number of packets that can
be buffered and can result in reduced performance.

Therefore, if guest GSO is not supported, use the MTU to calculate the
optimal amount of segments required.

Below is the iperf TCP test results over a Mellanox NIC, using vDPA for
1 VQ, queue size 1024, before and after the change, with the iperf
server running over the virtio-net interface.

MTU(Bytes)/Bandwidth (Gbit/s)
             Before   After
  1500        22.5     22.4
  9000        12.8     25.9

And result of queue size 256.
MTU(Bytes)/Bandwidth (Gbit/s)
             Before   After
  9000        2.15     11.9

With this patch no degradation is observed with multiple below tests and
feature bit combinations. Results are summarized below for q depth of
1024. Interface MTU is 1500 if MTU feature is disabled. MTU is set to 9000
in other tests.

Features/              Bandwidth (Gbit/s)
                         Before   After
mtu off                   20.1     20.2
mtu/indirect on           17.4     17.3
mtu/indirect/packed on    17.2     17.2
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <20220914144911.56422-3-gavinl@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Probe routine is already several hundred lines.
Use helper function for guest gso support check.
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <20220914144911.56422-2-gavinl@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

There's actually no way to set queue size on legacy virtio pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220815220447.155860-1-mst@redhat.com>

Add some spaces to vring_alloc_queue(make it look prettier).
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <20220926183306.4535-1-wangdeming@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The operators of vring_alloc_queue_split should use the unified style.Add
space for the '|' ,make it be looked more pretty.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <20220926022202.1516-1-wangdeming@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Add missing __init/__exit annotations to module init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Message-Id: <20220917083803.21521-1-xiujianfeng@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull i2c fixes from Wolfram Sang:
 "Add missing DT bindings for STM32 and a resource leak fix for DaVinci"

* tag 'i2c-for-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe
  dt-bindings: i2c: st,stm32-i2c: Document wakeup-source property
  dt-bindings: i2c: st,stm32-i2c: Document interrupt-names property

Pull misc perf fixes from Ingo Molnar:

 - Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs

 - Fix KVM guest PEBS register handling

 - Fix race/reentry bug in perf_output_read_group() reading of PMU
   counters

* tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix reentry problem in perf_output_read_group()
  perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
  perf/x86/intel: Fix unchecked MSR access error for Alder Lake N

Pull x86 fixes from Borislav Petkov:

 - Add the respective UP last level cache mask accessors in order not to
   cause segfaults when lscpu accesses their representation in sysfs

 - Fix for a race in the alternatives batch patching machinery when
   kprobes are set

* tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cacheinfo: Add a cpu_llc_shared_mask() UP variant
  x86/alternative: Fix race in try_get_desc()

The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.

Fixes: 17f88151 ("i2c: davinci: Add PM Runtime Support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Document wakeup-source property. This fixes dtbs_check warnings
when building current Linux DTs:

"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: i2c@40015000: Unevaluated properties are not allowed ('wakeup-source' was unexpected)
"
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Document interrupt-names property with "event" and "error" interrupt names.
This fixes dtbs_check warnings when building current Linux DTs:

"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: i2c@40015000: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
"
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some tiny USB and Thunderbolt driver fixes and quirks.

  Included in here are:

   - three uas/usb-storage driver quirks to get the devices working
     properly due to broken firmware images in them (they can not run at
     high data rates, and are also throttled on other operating systems
     because of this)

   - thunderbolt bugfix for plug event delays

   - typec runtime warning removal

   - dwc3 st driver bugfix. Note, a follow-on fix for this will end up
     coming in for 6.1-rc1 as the developers are still arguing over what
     the final solution will be, but this should be sufficient for now

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  uas: ignore UAS for Thinkplus chips
  usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
  uas: add no-uas quirk for Hiksemi usb_disk
  usb: dwc3: st: Fix node's child name
  usb: typec: ucsi: Remove incorrect warning
  thunderbolt: Explicitly reset plug events delay back to USB4 spec value

Pull media fixes from Mauro Carvalho Chehab:

 - some fixes for the v4l2 ioctl handler logic

 - a fix for an out of bound access in the DVB videobuf2 handler

 - three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)

* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: rkvdec: Disable H.264 error detection
  media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
  media: dvb_vb2: fix possible out of bound access
  media: v4l2-ioctl.c: fix incorrect error path
  media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
  media: uvcvideo: Fix InterfaceProtocol for Quanta camera

Pull more hotfixes from Andrew Morton:
 "One MAINTAINERS update, two MM fixes, both cc:stable"

The previous pull wasn't fated to be the last one..

* tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  damon/sysfs: fix possible memleak on damon_sysfs_add_target
  mm: fix BUG splat with kvmalloc + GFP_ATOMIC
  MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE

When damon_sysfs_add_target couldn't find proper task, New allocated
damon_target structure isn't registered yet, So, it's impossible to free
new allocated one by damon_sysfs_destroy_targets.

By calling damon_add_target as soon as allocating new target, Fix this
possible memory leak.

Link: https://lkml.kernel.org/r/20220926160611.48536-1-sj@kernel.org
Fixes: a61ea561 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Martin Zaharinov reports BUG with 5.19.10 kernel:
 kernel BUG at mm/vmalloc.c:2437!
 invalid opcode: 0000 [#1] SMP
 CPU: 28 PID: 0 Comm: swapper/28 Tainted: G        W  O      5.19.9 #1
 [..]
 RIP: 0010:__get_vm_area_node+0x120/0x130
  __vmalloc_node_range+0x96/0x1e0
  kvmalloc_node+0x92/0xb0
  bucket_table_alloc.isra.0+0x47/0x140
  rhashtable_try_insert+0x3a4/0x440
  rhashtable_insert_slow+0x1b/0x30
 [..]

bucket_table_alloc uses kvzalloc(GPF_ATOMIC).  If kmalloc fails, this now
falls through to vmalloc and hits code paths that assume GFP_KERNEL.

Link: https://lkml.kernel.org/r/20220926151650.15293-1-fw@strlen.de
Fixes: a421ef30 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
Signed-off-by: Florian Westphal <fw@strlen.de>
Suggested-by: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/linux-mm/Yy3MS2uhSgjF47dy@pc636/T/#tAcked-by: Michal Hocko <mhocko@suse.com>
Reported-by: Martin Zaharinov <micron10@gmail.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit c1fe8d05 ("ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER") removes
arch/arm/include/asm/hardware/entry-macro-iomd.S, but missed to adjust
MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Drop the file entry to the removed file in ARM/RISCPC ARCHITECTURE.

Link: https://lkml.kernel.org/r/20220919075255.386-1-lukas.bulwahn@gmail.com
Fixes: c1fe8d05 ("ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull drm fixes from Daniel Vetter:
 "Some last minute amd fixes:

   - VCN 4.x and GC 11.x fixes, mostly around fw"

* tag 'drm-fixes-2022-10-01' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcode
  drm/amdgpu: add helper to init rlc firmware
  drm/amdgpu: add helper to init rlc fw in header v2_4
  drm/amdgpu: add helper to init rlc fw in header v2_3
  drm/amdgpu: add helper to init rlc fw in header v2_2
  drm/amdgpu: add helper to init rlc fw in header v2_1
  drm/amdgpu: add helper to init rlc fw in header v2_0
  drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfx
  drm/amdgpu: Enable sram on vcn_4_0_2
  drm/amdgpu: Enable VCN DPG for GC11_0_1

Pull clk driver fixes from Stephen Boyd:
 "Here's the last batch of clk driver fixes for this release.

  These patches fix serious problems, for example, i.MX has an issue
  where changing the NAND clk frequency hangs the system. On Allwinner
  H6 the GPU is being overclocked which could lead to long term hardware
  damage.

  And finally on some Broadcom SoCs the serial console stopped working
  because the clk tree hierarchy description got broken by an
  inadvertant DT node name change. That's fixed by using
  'clock-output-names' to generate a stable and unique name for clks so
  the framework can properly link things up.

  There's also a couple build fixes in here. One to fix CONFIG_OF=n
  builds and one to avoid an array out of bounds bug that happens during
  clk registration on microchip. I hope that KASAN would have found that
  OOB problem, but probably KASAN wasn't attempted. Instead LLVM/clang
  compilation caused an oops, while GCC didn't"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx93: drop of_match_ptr
  clk: iproc: Do not rely on node name for correct PLL setup
  clk: sunxi-ng: h6: Fix default PLL GPU rate
  clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
  clk: microchip: mpfs: make the rtc's ahb clock critical
  clk: microchip: mpfs: fix clk_cfg array bounds violation
  clk: ingenic-tcu: Properly enable registers before accessing timers

Merge tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fail the 'perf test record' entry on error, fixing a regression where
   just setup stuff like allocating memory and not the actual things
   being tested failed.

 - Fixup disabling of -Wdeprecated-declarations for the python scripting
   engine, the previous attempt had a brown paper bag thinko.

 - Fix branch stack sampling test to include sanity check for branch
   filter on PowerPC.

 - Update is_ignored_symbol function to match the kernel ignored list,
   fixing running the 'perf test' entry that compares resolving symbols
   from kallsyms to resolving from vmlinux.

 - Augment the data source type with ARM's neoverse_spe list, the
   previous code was limited in its search resolving the data source.

 - Fix some clang 5 variable set but unused cases.

 - Get a perf cgroup more portably in BPF as the
   __builtin_preserve_enum_value builtin is not available in older
   versions of clang. In those cases we can forgo BPF's CO-RE (Compile
   Once, Run Everywhere).

 - More Fixes for Intel's hybrid CPU model.

* tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf build: Fixup disabling of -Wdeprecated-declarations for the python scripting engine
  perf tests mmap-basic: Remove unused variable to address clang 15 warning
  perf parse-events: Ignore clang 15 warning about variable set but unused in bison produced code
  perf tests record: Fail the test if the 'errs' counter is not zero
  perf test: Fix test case 87 ("perf record tests") for hybrid systems
  perf arm-spe: augment the data source type with neoverse_spe list
  perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the kernel ignored list
  perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter
  perf parse-events: Remove "not supported" hybrid cache events
  perf print-events: Fix "perf list" can not display the PMU prefix for some hybrid cache events
  perf tools: Get a perf cgroup more portably in BPF

Pull kvm fixes from Paolo Bonzini:
 "A small fix to the reported set of supported CPUID bits, and selftests
  fixes:

   - Skip tests that require EPT when it is not available

   - Do not hang when a test fails with an empty stack trace

   - avoid spurious failure when running access_tracking_perf_test in a
     KVM guest

   - work around GCC's tendency to optimize loops into mem*() functions,
     which breaks because the guest code in selftests cannot call into
     PLTs

   - fix -Warray-bounds error in fix_hypercall_test"

* tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Compare insn opcodes directly in fix_hypercall_test
  KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use
  KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
  KVM: selftests: Gracefully handle empty stack traces
  KVM: selftests: replace assertion with warning in access_tracking_perf_test
  KVM: selftests: Skip tests that require EPT when it is not available

Merge tag 'amd-drm-fixes-6.0-2022-09-30-1' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.0-2022-09-30-1:

amdgpu:
- VCN 4.x fixes
- RLC fixes for GC 11.x
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930210454.542719-1-alexander.deucher@amd.com

switch to common helper to initialize rlc firmware
for gfx11
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To initialzie rlc firmware according to rlc
firmware header version

v2: squash in backwards compat fix
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To initialize rlc firmware in header v2_4
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To initialize rlc firmware in header v2_3
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To initialize rlc firmware in header v2_2
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To initialize rlc firmware in header v2_1
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>