- 29 Jul, 2020 9 commits
-
-
Sagi Grimberg authored
We are starting to see some non-trivial states so lets start documenting them. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Chaitanya Kulkarni authored
This patch replaces the ctrl->namespaces tracking from linked list to xarray and improves the performance when accessing one namespce :- XArray vs Default:- IOPS and BW (more the better) increase BW (~1.8%):- --------------------------------------------------- XArray :- read: IOPS=160k, BW=626MiB/s (656MB/s)(18.3GiB/30001msec) read: IOPS=160k, BW=626MiB/s (656MB/s)(18.3GiB/30001msec) read: IOPS=162k, BW=631MiB/s (662MB/s)(18.5GiB/30001msec) Default:- read: IOPS=156k, BW=609MiB/s (639MB/s)(17.8GiB/30001msec) read: IOPS=157k, BW=613MiB/s (643MB/s)(17.0GiB/30001msec) read: IOPS=160k, BW=626MiB/s (656MB/s)(18.3GiB/30001msec) Submission latency (less the better) decrease (~8.3%):- ------------------------------------------------------- XArray:- slat (usec): min=7, max=8386, avg=11.19, stdev=5.96 slat (usec): min=7, max=441, avg=11.09, stdev=4.48 slat (usec): min=7, max=1088, avg=11.21, stdev=4.54 Default :- slat (usec): min=8, max=2826.5k, avg=23.96, stdev=3911.50 slat (usec): min=8, max=503, avg=12.52, stdev=5.07 slat (usec): min=8, max=2384, avg=12.50, stdev=5.28 CPU Usage (less the better) decrease (~5.2%):- ---------------------------------------------- XArray:- cpu : usr=1.84%, sys=18.61%, ctx=949471, majf=0, minf=250 cpu : usr=1.83%, sys=18.41%, ctx=950262, majf=0, minf=237 cpu : usr=1.82%, sys=18.82%, ctx=957224, majf=0, minf=234 Default:- cpu : usr=1.70%, sys=19.21%, ctx=858196, majf=0, minf=251 cpu : usr=1.82%, sys=19.98%, ctx=929720, majf=0, minf=227 cpu : usr=1.83%, sys=20.33%, ctx=947208, majf=0, minf=235. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Yamin Friedman authored
Has the driver use shared CQs providing ~10%-20% improvement when multiple disks are used. Instead of opening a CQ for each QP per controller, a CQ for each core will be provided by the RDMA core driver that will be shared between the QPs on that core reducing interrupt overhead. Signed-off-by:
Yamin Friedman <yaminf@mellanox.com> Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
Yamin Friedman authored
Has the driver use shared CQs providing ~10%-20% improvement as seen in the patch introducing shared CQs. Instead of opening a CQ for each QP per controller connected, a CQ for each QP will be provided by the RDMA core driver that will be shared between the QPs on that core reducing interrupt overhead. Signed-off-by:
-
David E. Box authored
This patch implements a solution for a BIOS hack used on some currently shipping Intel systems to change driver power management policy for PCIe NVMe drives. Some newer Intel platforms, like some Comet Lake systems, require that PCIe devices use D3 when doing suspend-to-idle in order to allow the platform to realize maximum power savings. This is particularly needed to support ATX power supply shutdown on desktop systems. In order to ensure this happens for root ports with storage devices, Microsoft apparently created this ACPI _DSD property as a way to influence their driver policy. To my knowledge this property has not been discussed with the NVME specification body. Though the solution is not ideal, it addresses a problem that also affects Linux since the NVMe driver's default policy of using NVMe APST during suspend-to-idle prevents the PCI root port from going to D3 and leads to higher power consumption for these platforms. The power consumption difference may be negligible on laptop systems, but many watts on desktop systems when the ATX power supply is blocked from powering down. The patch creates a new nvme_acpi_storage_d3 function to check for the StorageD3Enable property during probe and enables D3 as a quirk if set. It also provides a 'noacpi' module parameter to allow skipping the quirk if needed. Tested with: - PM961 NVMe SED Samsung 512GB - INTEL SSDPEKKF512G8 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-introSigned-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Chaitanya Kulkarni authored
>From the initial implementation of NVMe SGL kernel support commit a7a7cbe3 ("nvme-pci: add SGL support") with addition of the commit 943e942e ("nvme-pci: limit max IO size and segments to avoid high order allocations") now there is only caller left for nvme_pci_iod_alloc_size() which statically passes true for last parameter that calculates allocation size based on SGL since we need size of biggest command supported for mempool allocation. This patch modifies the helper functions nvme_pci_iod_alloc_size() such that it is now uses maximum of PRP and SGL size for iod allocation size calculation. Signed-off-by:
-
Chaitanya Kulkarni authored
Saving the nvme controller's page size was from a time when the driver tried to use different sized pages, but this value is always set to a constant, and has been this way for some time. Remove the 'page_size' field and replace its usage with the constant value. This also lets the compiler make some micro-optimizations in the io path, and that's always a good thing. Signed-off-by:
-
Baolin Wang authored
We've already validated the 'kato' in nvme_start_keep_alive(), thus no need to validate it again in nvme_start_ctrl(). Remove it. Signed-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Dan Carpenter authored
"v" is an unsigned int so it can't be more than UINT_MAX. Removing this check makes it easier to preserve the error code as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 28 Jul, 2020 1 commit
-
-
Coly Li authored
This patch is a fix to patch "bcache: fix bio_{start,end}_io_acct with proper device". The previous patch uses a hack to temporarily set bi_disk to bcache device, which is mistaken too. As Christoph suggests, this patch uses disk_{start,end}_io_acct() to count I/O for bcache device in the correct way. Fixes: 85750aeb ("bcache: use bio_{start,end}_io_acct") Signed-off-by:Coly Li <colyli@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 25 Jul, 2020 25 commits
-
-
Coly Li authored
Commit 85750aeb ("bcache: use bio_{start,end}_io_acct") moves the io account code to the location after bio_set_dev(bio, dc->bdev) in cached_dev_make_request(). Then the account is performed incorrectly on backing device, indeed the I/O should be counted to bcache device like /dev/bcache0. With the mistaken I/O account, iostat does not display I/O counts for bcache device and all the numbers go to backing device. In writeback mode, the hard drive may have 340K+ IOPS which is impossible and wrong for spinning disk. This patch introduces bch_bio_start_io_acct() and bch_bio_end_io_acct(), which switches bio->bi_disk to bcache device before calling bio_start_io_acct() or bio_end_io_acct(). Now the I/Os are counted to bcache device, and bcache device, cache device and backing device have their correct I/O count information back. Fixes: 85750aeb ("bcache: use bio_{start,end}_io_acct") Signed-off-by:
-
Coly Li authored
Bcache uses struct bbio to do I/Os for meta data pages like uuids, disk_buckets, prio_buckets, and btree nodes. Example writing a btree node onto cache device, the process is, - Allocate a struct bbio from mempool c->bio_meta. - Inside struct bbio embedded a struct bio, initialize bi_inline_vecs for this embedded bio. - Call bch_bio_map() to map each meta data page to each bv from the inlined bi_io_vec table. - Call bch_submit_bbio() to submit the bio into underlying block layer. - When the I/O completed, only release the struct bbio, don't touch the reference counter of the meta data pages. The struct bbio is defined as, 738 struct bbio { 739 unsigned int submit_time_us; [snipped] 748 struct bio bio; 749 }; Because struct bio is embedded at the end of struct bbio, therefore the actual size of struct bbio is sizeof(struct bio) + size of the embedded bio->bi_inline_vecs. Now all the meta data bucket size are limited to meta_bucket_pages(), if the bucket size is large than meta_bucket_pages()*PAGE_SECTORS, rested space in the bucket is unused. Therefore the most used space in meta bucket is (1<<MAX_ORDER) pages, or (1<<CONFIG_FORCE_MAX_ZONEORDER) if it is configured. Therefore for large bucket size, it is unnecessary to calculate the allocation size of mempool c->bio_meta as, mempool_init_kmalloc_pool(&c->bio_meta, 2, sizeof(struct bbio) + sizeof(struct bio_vec) * bucket_pages(c)) It is too large, neither the Linux buddy allocator cannot allocate so much continuous pages, nor the extra allocated pages are wasted. This patch replace bucket_pages() to meta_bucket_pages() in two places, - In bch_cache_set_alloc(), when initialize mempool c->bio_meta, uses sizeof(struct bbio) + sizeof(struct bio_vec) * bucket_pages(c) to set the allocating object size. - In bch_bbio_alloc(), when calling bio_init() to set inline bvec talbe bi_inline_bvecs, uses meta_bucket_pages() to indicate number of the inline bio vencs number. Now the maximum size of embedded bio inside struct bbio exactly matches the limit of meta_bucket_pages(), no extra page wasted. Signed-off-by:Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Coly Li authored
Mempool c->fill_iter is used to allocate memory for struct btree_iter in bch_btree_node_read_done() to iterate all keys of a read-in btree node. The allocation size is defined in bch_cache_set_alloc() by, mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size)) where iter_size is defined by a calculation, (sb->bucket_size / sb->block_size + 1) * sizeof(struct btree_iter_set) For 16bit width bucket_size the calculation is OK, but now the bucket size is extended to 32bit, the bucket size can be 2GB. By the above calculation, iter_size can be 2048 pages (order 11 is still accepted by buddy allocator). But the actual size holds the bkeys in meta data bucket is limited to meta_bucket_pages() already, which is 16MB. By the above calculation, if replace sb->bucket_size by meta_bucket_pages() * PAGE_SECTORS, the result is 16 pages. This is the size large enough for the mempool allocation to struct btree_iter. Therefore in worst case every time mempool c->fill_iter allocates, at most 4080 pages are wasted and won't be used. Therefore this patch uses meta_bucket_pages() * PAGE_SECTORS to calculate the iter size in bch_cache_set_alloc(), to avoid extra memory allocation from mempool c->fill_iter. Signed-off-by:
-
Coly Li authored
The following three sysfs files are created to display according feature set information of bcache: /sys/fs/bcache/<cache set UUID>/internal/feature_compat /sys/fs/bcache/<cache set UUID>/internal/feature_ro_compat /sys/fs/bcache/<cache set UUID>/internal/feature_incompat is added by this patch, to display feature sets information of the cache set. Now only an incompat feature 'large_bucket' added in bcache, the sysfs file content is: [large_bucket] string large_bucket means the running bcache drive supports incompat feature 'large_bucket', the wrapping [] means the 'large_bucket' feature is currently enabled on this cache set. This patch is ready to display compat and ro_compat features, in future once bcache code implements such feature sets, the according feature strings will be displayed in their sysfs files too. Signed-off-by: -
Coly Li authored
The large bucket feature is to extend bucket_size from 16bit to 32bit. When create cache device on zoned device (e.g. zoned NVMe SSD), making a single bucket cover one or more zones of the zoned device is the simplest way to support zoned device as cache by bcache. But current maximum bucket size is 16MB and a typical zone size of zoned device is 256MB, this is the major motiviation to extend bucket size to a larger bit width. This patch is the basic and first change to support large bucket size, the major changes it makes are, - Add BCH_FEATURE_INCOMPAT_LARGE_BUCKET for the large bucket feature, INCOMPAT means it introduces incompatible on-disk format change. - Add BCH_FEATURE_INCOMPAT_FUNCS(large_bucket, LARGE_BUCKET) routines. - Adds __le16 bucket_size_hi into struct cache_sb_disk at offset 0x8d0 for the on-disk super block format. - For the in-memory super block struct cache_sb, member bucket_size is extended from __u16 to __32. - Add get_bucket_size() to combine the bucket_size and bucket_size_hi from struct cache_sb_disk into an unsigned int value. Since we already have large bucket size helpers meta_bucket_pages(), meta_bucket_bytes() and alloc_meta_bucket_pages(), they make sure when bucket size > 8MB, the memory allocation for bcache meta data bucket won't fail no matter how large the bucket size extended. So these meta data buckets are handled properly when the bucket size width increase from 16bit to 32bit, we don't need to worry about them. Signed-off-by:
-
Coly Li authored
Currently the bcache internal btree node occupies a whole bucket. When loading the btree node from cache device into memory, mca_data_alloc() will call bch_btree_keys_alloc() to allocate memory for the whole bucket size, ilog2(b->c->btree_pages) is send to bch_btree_keys_alloc() as the parameter 'page_order'. c->btree_pages is set as bucket_pages() in bch_cache_set_alloc(), for bucket size > 8MB, ilog2(b->c->btree_pages) is 12 for 4KB page size. By default the maximum page order __get_free_pages() accepts is MAX_ORDER (11), in this condition bch_btree_keys_alloc() will always fail. Because of other over-page-order allocation failure fails the cache device registration, such btree node allocation failure wasn't observed during runtime. After other blocking page allocation failures for bucket size > 8MB, this btree node allocation issue may trigger potentical risk e.g. infinite dead-loop to retry btree node allocation after failure. This patch fixes the potential problem by setting c->btree_pages to meta_bucket_pages() in bch_cache_set_alloc(). In the condition that bucket size > 8MB, meta_bucket_pages() will always return a number which won't exceed the maximum page order of the buddy allocator. Signed-off-by:
-
Coly Li authored
In bch_btree_cache_alloc() when CONFIG_BCACHE_DEBUG is configured, allocate memory for c->verify_ondisk may fail if the bucket size > 8MB, which will require __get_free_pages() to allocate continuous pages with order > 11 (the default MAX_ORDER of Linux buddy allocator). Such over size allocation will fail, and cause 2 problems, - When CONFIG_BCACHE_DEBUG is configured, bch_btree_verify() does not work, because c->verify_ondisk is NULL and bch_btree_verify() returns immediately. - bch_btree_cache_alloc() will fail due to c->verify_ondisk allocation failed, then the whole cache device registration fails. And because of this failure, the first problem of bch_btree_verify() has no chance to be triggered. This patch fixes the above problem by two means, 1) If pages allocation of c->verify_ondisk fails, set it to NULL and returns bch_btree_cache_alloc() with -ENOMEM. 2) When calling __get_free_pages() to allocate c->verify_ondisk pages, use ilog2(meta_bucket_pages(&c->sb)) to make sure ilog2() will always generate a pages order <= MAX_ORDER (or CONFIG_FORCE_MAX_ZONEORDER). Then the buddy system won't directly reject the allocation request. Signed-off-by:
-
Coly Li authored
Similar to c->uuids, struct cache's prio_buckets and disk_buckets also have the potential memory allocation failure during cache registration if the bucket size > 8MB. ca->prio_buckets can be stored on cache device in multiple buckets, its in-memory space is allocated by kzalloc() interface but normally allocated by alloc_pages() because the size > KMALLOC_MAX_CACHE_SIZE. So allocation of ca->prio_buckets has the MAX_ORDER restriction too. If the bucket size > 8MB, by default the page allocator will fail because the page order > 11 (default MAX_ORDER value). ca->prio_buckets should also use meta_bucket_bytes(), meta_bucket_pages() to decide its memory size and use alloc_meta_bucket_pages() to allocate pages, to avoid the allocation failure during cache set registration when bucket size > 8MB. ca->disk_buckets is a single bucket size memory buffer, it is used to iterate each bucket of ca->prio_buckets, and compose the bio based on memory of ca->disk_buckets, then write ca->disk_buckets memory to cache disk one-by-one for each bucket of ca->prio_buckets. ca->disk_buckets should have in-memory size exact to the meta_bucket_pages(), this is the size that ca->prio_buckets will be stored into each on-disk bucket. This patch fixes the above issues and handle cache's prio_buckets and disk_buckets properly for bucket size larger than 8MB. Signed-off-by:
-
Coly Li authored
Bcache allocates a whole bucket to store c->uuids on cache device, and allocates continuous pages to store it in-memory. When the bucket size exceeds maximum allocable continuous pages, bch_cache_set_alloc() will fail and cache device registration will fail. This patch allocates c->uuids by alloc_meta_bucket_pages(), and uses ilog2(meta_bucket_pages(c)) to indicate order of c->uuids pages when free it. When writing c->uuids to cache device, its size is decided by meta_bucket_pages(c) * PAGE_SECTORS. Now c->uuids is properly handled for bucket size > 8MB. Signed-off-by:
-
Coly Li authored
Currently the in-memory meta data like c->uuids or c->disk_buckets are allocated by alloc_bucket_pages(). The macro alloc_bucket_pages() calls __get_free_pages() to allocated continuous pages with order indicated by ilog2(bucket_pages(c)), #define alloc_bucket_pages(gfp, c) \ ((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c)))) The maximum order is defined as MAX_ORDER, the default value is 11 (and can be overwritten by CONFIG_FORCE_MAX_ZONEORDER). In bcache code the maximum bucket size width is 16bits, this is restricted both by KEY_SIZE size and bucket_size size from struct cache_sb_disk. The maximum 16bits width and power-of-2 value is (1<<15) in unit of sector (512byte). It means the maximum value of bucket size in bytes is (1<<24) bytes a.k.a 4096 pages. When the bucket size is set to maximum permitted value, ilog2(4096) is 12, which exceeds the default maximum order __get_free_pages() can accepted, the failed pages allocation will fail cache set registration procedure and print a kernel oops message for the exceeded pages order. This patch introduces meta_bucket_pages(), meta_bucket_bytes(), and alloc_bucket_pages() helper routines. meta_bucket_pages() indicates the maximum pages can be allocated to meta data bucket, meta_bucket_bytes() indicates the according maximum bytes, and alloc_bucket_pages() does the pages allocation for meta bucket. Because meta_bucket_pages() chooses the smaller value among the bucket size and MAX_ORDER_NR_PAGES, it still works when MAX_ORDER overwritten by CONFIG_FORCE_MAX_ZONEORDER. Following patches will use these helper routines to decide maximum pages can be allocated for different meta data buckets. If the bucket size is larger than meta_bucket_bytes(), the bcache registration can continue to success, just the space more than meta_bucket_bytes() inside the bucket is wasted. Comparing bcache failed for large bucket size, wasting some space for meta data buckets is acceptable at this moment. Signed-off-by: -
Coly Li authored
We have struct cache_sb_disk for on-disk super block already, it is unnecessary to keep the in-memory super block format exactly mapping to the on-disk struct layout. This patch adds code comments to notice that struct cache_sb is not exactly mapping to cache_sb_disk, and removes the useless member csum and pad[5]. Although struct cache_sb does not belong to uapi, but there are still some on-disk format related macros reference it and it is unncessary to get rid of such dependency now. So struct cache_sb will continue to stay in include/uapi/linux/bache.h for now. Signed-off-by:
-
Coly Li authored
Setting sb->first_bucket and checking sb->keys indeed are only for cache device, it does not make sense to do them in read_super() for backing device too. This patch moves the related code piece into read_super_common() explicitly for cache device and avoid the confusion. Signed-off-by:
-
Coly Li authored
The new added super block version BCACHE_SB_VERSION_BDEV_WITH_FEATURES (5) BCACHE_SB_VERSION_CDEV_WITH_FEATURES value (6), is for the feature set bits. Devices have super block version equal to the new version will have three new members for feature set bits in the on-disk super block, __le64 feature_compat; __le64 feature_incompat; __le64 feature_ro_compat; They are used for further new features which may introduce on-disk format change, and avoid unncessary super block version increase. The very basic features handling code skeleton is also initialized in this patch. Signed-off-by: -
Coly Li authored
In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value. But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check, 2156 if (ca->sb.seq > c->sb.seq) { 2157 c->sb.version = ca->sb.version; 2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16); 2159 c->sb.flags = ca->sb.flags; 2160 c->sb.seq = ca->sb.seq; 2161 pr_debug("set version = %llu\n", c->sb.version); 2162 } c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated. The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly. But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered. This patch modifies the if() check to the following way, 2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) { Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device. Signed-off-by: -
Coly Li authored
In bch_cache_set_alloc() there is a big if() checks combined by 11 items together. When this big if() statement fails, it is difficult to tell exactly which item fails indeed. This patch disassembles this big if() checks into 11 single if() checks, which makes code debug more easier. Signed-off-by:
-
Coly Li authored
The improperly set bucket or block size will trigger error in read_super_common(). For large bucket size, a more accurate error message for invalid bucket or block size is necessary. This patch disassembles the combined if() checks into multiple single if() check, and provide more accurate error message for each check failure condition. Signed-off-by:
-
Coly Li authored
Later patches will introduce feature set bits to on-disk super block and increase super block version. Current code in read_super() which reads common part of super block for version BCACHE_SB_VERSION_CDEV and version BCACHE_SB_VERSION_CDEV_WITH_UUID will be shared with the new version. Therefore this patch moves the reusable part into read_super_common(), this preparation patch will make later patches more simplier and only focus on new feature set bits. Signed-off-by:
-
Coly Li authored
offset_to_stripe() returns the stripe number (in type unsigned int) from an offset (in type uint64_t) by the following calculation, do_div(offset, d->stripe_size); For large capacity backing device (e.g. 18TB) with small stripe size (e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual returned value which caller receives is 536870912, due to the overflow. Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are in range [0, bcache_dev->nr_stripes - 1]. This patch adds a upper limition check in offset_to_stripe(): the max valid stripe number should be less than bcache_device->nr_stripes. If the calculated stripe number from do_div() is equal to or larger than bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes is less than INT_MAX, exceeding upper limitation doesn't mean overflow, therefore -EOVERFLOW is not used as error code.) This patch also changes nr_stripes' type of struct bcache_device from 'unsigned int' to 'int', and return value type of offset_to_stripe() from 'unsigned int' to 'int', to match their exact data ranges. All locations where bcache_device->nr_stripes and offset_to_stripe() are referenced also get updated for the above type change. Reported-and-tested-by:
Ken Raeburn <raeburn@redhat.com> Signed-off-by:
-
Coly Li authored
For some block devices which large capacity (e.g. 8TB) but small io_opt size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu- lated by, DIV_ROUND_UP_ULL(sectors, d->stripe_size); might be overflow to the unsigned int bcache_device->nr_stripes. This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL() and after the value is checked to be available in unsigned int range, sets it to bache_device->nr_stripes. Then the overflow is avoided. Reported-and-tested-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
-
Xu Wang authored
Remove unneeded variable i in bch_dirty_init_thread(). Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Xu Wang authored
Using for_each_clear_bit() to simplify the code. Signed-off-by:
-
Coly Li authored
There are some meta data of bcache are allocated by multiple pages, and they are used as bio bv_page for I/Os to the cache device. for example cache_set->uuids, cache->disk_buckets, journal_write->data, bset_tree->data. For such meta data memory, all the allocated pages should be treated as a single memory block. Then the memory management and underlying I/O code can treat them more clearly. This patch adds __GFP_COMP flag to all the location allocating >0 order pages for the above mentioned meta data. Then their pages are treated as compound pages now. Signed-off-by:
-
Jean Delvare authored
registraion -> registration Fixes: 0c8d3fce ("bcache: configure the asynchronous registertion to be experimental") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
-
- 24 Jul, 2020 1 commit
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.9/drivers Pull MD fix from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: use do_div() for 64 bit divisions in raid5_sync_request
-
- 23 Jul, 2020 1 commit
-
-
Yufen Yu authored
We get compilation error on 32-bit architectures (e.g. m68k), as: ERROR: modpost: "__udivdi3" [drivers/md/raid456.ko] undefined! Since 'sync_blocks' is defined as u64, use do_div() to fix this error. Fixes: c911c46c ("md/raid456: convert macro STRIPE_* to RAID5_STRIPE_*") Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com>
-
- 22 Jul, 2020 3 commits
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.9/drivers Pull MD for 5.9 from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid10: avoid deadlock on recovery. raid: md_p.h: drop duplicated word in a comment md-cluster: fix rmmod issue when md_cluster convert bitmap to none md-cluster: fix safemode_delay value when converting to clustered bitmap md/raid5: support config stripe_size by sysfs entry md/raid5: set default stripe_size as 4096 md/raid456: convert macro STRIPE_* to RAID5_STRIPE_* raid5: remove the meaningless check in raid5_make_request raid5: put the comment of clear_batch_ready to the right place raid5: call clear_batch_ready before set STRIPE_ACTIVE md: raid10: Fix compilation warning md: raid5: Fix compilation warning md: raid5-cache: Remove set but unused variable md: Fix compilation warning
-
Vitaly Mayatskikh authored
When disk failure happens and the array has a spare drive, resync thread kicks in and starts to refill the spare. However it may get blocked by a retry thread that resubmits failed IO to a mirror and itself can get blocked on a barrier raised by the resync thread. Acked-by:
Nigel Croxon <ncroxon@redhat.com> Signed-off-by:
Vitaly Mayatskikh <vmayatskikh@digitalocean.com> Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "the" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Song Liu <song@kernel.org> Cc: linux-raid@vger.kernel.org Signed-off-by:
-
