- 01 May, 2018 23 commits
-
-
Michael S. Tsirkin authored
commit 2855b335 upstream. an allocated buffer doesn't need to be tied to a vq - only vq->vdev is ever used. Pass the function the just what it needs - the vdev. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael S. Tsirkin authored
commit 24a7e4d2 upstream. For cleanup it's helpful to be able to simply scan all vqs and discard all data. Add an iterator to do that. Cc: stable@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 1d8d6428 upstream. The Dell Dock USB-audio device with 0bda:4014 is behaving notoriously bad, and we have already applied some workaround to avoid the firmware hiccup. Yet we still need to skip one thing, the Extension Unit at ID 4, which doesn't react correctly to the mixer ctl access. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1090658 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ravi Chandra Sadineni authored
commit 83a62c51 upstream. On chromebooks we depend on wakeup count to identify the wakeup source. But currently USB devices do not increment the wakeup count when they trigger the remote wake. This patch addresses the same. Resume condition is reported differently on USB 2.0 and USB 3.0 devices. On USB 2.0 devices, a wake capable device, if wake enabled, drives resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7). The upstream facing port then sets C_PORT_SUSPEND bit and reports a port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port has resumed before driving the resume signal from the host and C_PORT_SUSPEND is set, then the device attached to the given port might be the reason for the last system wakeup. Increment the wakeup count for the same. On USB 3.0 devices, a function may signal that it wants to exit from device suspend by sending a Function Wake Device Notification to the host (USB3.0 spec section 8.5.6.4) Thus on receiving the Function Wake, increment the wakeup count. Signed-off-by:
Ravi Chandra Sadineni <ravisadineni@chromium.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kamil Lulko authored
commit 3180dabe upstream. Add DELAY_INIT quirk to fix the following problem with HP v222w 16GB Mini: usb 1-3: unable to read config index 0 descriptor/start: -110 usb 1-3: can't read configurations, error -110 usb 1-3: can't set config #1, error -110 Signed-off-by:
Kamil Lulko <kamilx.lulko@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Heikki Krogerus authored
commit b1b59e16 upstream. On some boards, under heavy load, the EC firmware is unable to complete commands even in one second. Increasing the command completion timeout value to five seconds. Reported-by:
Quanxian Wang <quanxian.wang@intel.com> Fixes: c1b0bc2d ("usb: typec: Add support for UCSI interface") Cc: <stable@vger.kernel.org> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Kyle Roeschley authored
commit 1e23aace upstream. Added the USB VID and PID for the USB serial console on some National Instruments devices. Signed-off-by:
Kyle Roeschley <kyle.roeschley@ni.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Vasyl Vavrychuk authored
commit 470b5d6f upstream. Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID (0x0403) and product ID (0x6010) as the "original" FTDI device. This patch avoids picking up by ftdi_sio of the first interface of this USB device. After that this device can be used by Arrow user-space JTAG driver. Signed-off-by:
Vasyl Vavrychuk <vvavrychuk@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Collin May authored
commit fe710508 upstream. Add simple driver for libtransistor USB console. This device is implemented in software: https://github.com/reswitched/libtransistor/blob/development/lib/usb_serial.cSigned-off-by:
Collin May <collin@collinswebsite.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 621faf4f upstream. The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable@vger.kernel.org Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit c20f53c5 upstream. This reverts commit b07c1251 It is incomplete and causes hangs on devices when shutting down. It needs a much more "complete" fix in order to work properly. As that fix has not been merged, revert this patch for now before it causes any more problems. Cc: Greg Hackmann <ghackmann@google.com> Cc: Adam Wallis <awallis@codeaurora.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan authored
commit 5b22f676 upstream. Validate !rhport < 0 before using it to access port_status array. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan authored
commit 9020a7ef upstream. vhci_hcd fails to do reset to put usb device and sockfd in the module remove/stop paths. Fix the leak. Signed-off-by:
-
Shuah Khan authored
commit 4bfb141b upstream. usbip_host calls device_attach() without holding dev->parent lock. Fix it. Signed-off-by:
-
Shuah Khan authored
commit 4c982482 upstream. Fix it to not print kernel pointer address. Remove the conditional and debug message as it isn't very useful. Signed-off-by:
-
Theodore Ts'o authored
commit 4e00b339 upstream. On systems without sufficient boot randomness, no point spamming dmesg. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 6c1e851c upstream. We can do a sleeping allocation from an irq context when CONFIG_NUMA is enabled. Fix this by initializing the NUMA crng instances in a workqueue. Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot+9de458f6a5e713ee8c1a@syzkaller.appspotmail.com Fixes: 8ef35c86 ("random: set up the NUMA crng instances...") Cc: stable@vger.kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 8ef35c86 upstream. Until the primary_crng is fully initialized, don't initialize the NUMA crng nodes. Otherwise users of /dev/urandom on NUMA systems before the CRNG is fully initialized can get very bad quality randomness. Of course everyone should move to getrandom(2) where this won't be an issue, but there's a lot of legacy code out there. This related to CVE-2018-1108. Reported-by:
Jann Horn <jannh@google.com> Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly...") Cc: stable@kernel.org # 4.8+ Signed-off-by:
-
Lukas Czerner authored
commit 22be37ac upstream. Currently in ext4_valid_block_bitmap() we expect the bitmap to be positioned anywhere between 0 and s_blocksize clusters, but that's wrong because the bitmap can be placed anywhere in the block group. This causes false positives when validating bitmaps on perfectly valid file system layouts. Fix it by checking whether the bitmap is within the group boundary. The problem can be reproduced using the following mkfs -t ext3 -E stride=256 /dev/vdb1 mount /dev/vdb1 /mnt/test cd /mnt/test wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.16.3.tar.xz tar xf linux-4.16.3.tar.xz This will result in the warnings in the logs EXT4-fs error (device vdb1): ext4_validate_block_bitmap:399: comm tar: bg 84: block 2774529: invalid block bitmap [ Changed slightly for clarity and to not drop a overflow test -- TYT ] Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Fixes: 7dac4a17 ("ext4: add validity checks for bitmap block numbers") Cc: stable@vger.kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 7dac4a17 upstream. An privileged attacker can cause a crash by mounting a crafted ext4 image which triggers a out-of-bounds read in the function ext4_valid_block_bitmap() in fs/ext4/balloc.c. This issue has been assigned CVE-2018-1093. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199181 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1560782Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 7ef79ad5 upstream. Fixes: a45403b5 ("ext4: always initialize the crc32c checksum driver") Reported-by:
François Valenduc <francoisvalenduc@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit b2569260 upstream. If ext4 tries to start a reserved handle via jbd2_journal_start_reserved(), and the journal has been aborted, this can result in a NULL pointer dereference. This is because the fields h_journal and h_transaction in the handle structure share the same memory, via a union, so jbd2_journal_start_reserved() will clear h_journal before calling start_this_handle(). If this function fails due to an aborted handle, h_journal will still be NULL, and the call to jbd2_journal_free_reserved() will pass a NULL journal to sub_reserve_credits(). This can be reproduced by running "kvm-xfstests -c dioread_nolock generic/475". Cc: stable@kernel.org # 3.11 Fixes: 8f7d89f3 ("jbd2: transaction reservation support") Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Eric Biggers authored
commit 349fa7d6 upstream. During the "insert range" fallocate operation, extents starting at the range offset are shifted "right" (to a higher file offset) by the range length. But, as shown by syzbot, it's not validated that this doesn't cause extents to be shifted beyond EXT_MAX_BLOCKS. In that case ->ee_block can wrap around, corrupting the extent tree. Fix it by returning an error if the space between the end of the last extent and EXT4_MAX_BLOCKS is smaller than the range being inserted. This bug can be reproduced by running the following commands when the current directory is on an ext4 filesystem with a 4k block size: fallocate -l 8192 file fallocate --keep-size -o 0xfffffffe000 -l 4096 -n file fallocate --insert-range -l 8192 file Then after unmounting the filesystem, e2fsck reports corruption. Reported-by: syzbot+06c885be0edcdaeab40c@syzkaller.appspotmail.com Fixes: 331573fe ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
- 29 Apr, 2018 17 commits
-
-
Greg Kroah-Hartman authored
-
Hans de Goede authored
commit 53fa1f6e upstream. Commit 5928c281 (ACPI / video: Default lcd_only to true on Win8-ready and newer machines) made only_lcd default to true on all machines where acpi_osi_is_win8() returns true, including laptops. The purpose of this is to avoid the bogus / non-working acpi backlight interface which many newer BIOS-es define on desktop machines. But this is causing a regression on some laptops, specifically on the Dell XPS 13 2013 model, which does not have the LCD flag set for its fully functional ACPI backlight interface. Rather then DMI quirking our way out of this, this commits changes the logic for setting only_lcd to true, to only do this on machines with a desktop (or server) dmi chassis-type. Note that we cannot simply only check the chassis-type and not register the backlight interface based on that as there are some laptops and tablets which have their chassis-type set to "3" aka desktop. Hopefully the combination of checking the LCD flag, but only on devices with a desktop(ish) chassis-type will avoid the needs for DMI quirks for this, or at least limit the amount of DMI quirks which we need to a minimum. Fixes: 5928c281 (ACPI / video: Default lcd_only to true on Win8-ready and newer machines) Reported-and-tested-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Heiko Carstens authored
commit 783c3b53 upstream. Implement s390 specific arch_uretprobe_is_alive() to avoid SIGSEGVs observed with uretprobes in combination with setjmp/longjmp. See commit 2dea1d9c ("powerpc/uprobes: Implement arch_uretprobe_is_alive()") for more details. With this implemented all test cases referenced in the above commit pass. Reported-by:
Ziqian SUN <zsun@redhat.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
commit 5d27a2bf upstream. When a new CKD storage volume is defined at the storage server, Linux may be relying on outdated information about that volume, which leads to the following errors: 1. Command Reject Errors for minidisk on z/VM: dasd-eckd.b3193d: 0.0.XXXX: An error occurred in the DASD device driver, reason=09 dasd(eckd): I/O status report for device 0.0.XXXX: dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:02 CS:00 RC:0 dasd(eckd): device 0.0.2046: Failing CCW: 00000000XXXXXXXX dasd(eckd): Sense(hex) 0- 7: 80 00 00 00 00 00 00 00 dasd(eckd): Sense(hex) 8-15: 00 00 00 00 00 00 00 00 dasd(eckd): Sense(hex) 16-23: 00 00 00 00 e1 00 0f 00 dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 00 00 00 dasd(eckd): 24 Byte: 0 MSG 0, no MSGb to SYSOP 2. Equipment Check errors on LPAR or for dedicated devices on z/VM: dasd(eckd): I/O status report for device 0.0.XXXX: dasd(eckd): in req: 00000000XXXXXXXX CC:00 FC:04 AC:00 SC:17 DS:0E CS:40 fcxs:01 schxs:00 RC:0 dasd(eckd): device 0.0.9713: Failing TCW: 00000000XXXXXXXX dasd(eckd): Sense(hex) 0- 7: 10 00 00 00 13 58 4d 0f dasd(eckd): Sense(hex) 8-15: 67 00 00 00 00 00 00 04 dasd(eckd): Sense(hex) 16-23: e5 18 05 33 97 01 0f 0f dasd(eckd): Sense(hex) 24-31: 00 00 40 e2 00 04 58 0d dasd(eckd): 24 Byte: 0 MSG f, no MSGb to SYSOP Fix this problem by using the up-to-date information provided during online processing via the device specific SNEQ to detect the case of outdated LCU data. If there is a difference, perform a re-read of that data. Cc: stable@vger.kernel.org Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
commit af2e460a upstream. Channel path descriptors have been seen as something stable (as long as the chpid is configured). Recent tests have shown that the descriptor can also be altered when the link state of a channel path changes. Thus it is necessary to update the descriptor during handling of resource accessibility events. Cc: <stable@vger.kernel.org> Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Peter Xu authored
commit 9a0fd675 upstream. It's been missing for a while but no one is touching that up. Fix it. Link: http://lkml.kernel.org/r/20180315060639.9578-1-peterx@redhat.com CC: Ingo Molnar <mingo@kernel.org> Cc:stable@vger.kernel.org Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Finn Thain authored
commit 5a13388d upstream. Reading to the end of a 720K disk results in an IO error instead of EOF because the block layer thinks the disk has 2880 sectors. (Partly this is a result of inverted logic of the ONEMEG_MEDIA bit that's now fixed.) Initialize the density and head count in swim_add_floppy() to agree with the device size passed to set_capacity() during drive probe. Call set_capacity() again upon device open, after refreshing the density and head count values. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Finn Thain authored
commit 7ae6a2b6 upstream. In the floppy_find() function in swim.c is a call to get_disk(swd->unit[drive].disk). The actual parameter to this call can be a NULL pointer when drive == swd->floppy_count. This causes an oops in get_disk(). Data read fault at 0x00000198 in Super Data (pc=0x1be5b6) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: swim_mod ipv6 mac8390 PC: [<001be5b6>] get_disk+0xc/0x76 SR: 2004 SP: 9a078bc1 a2: 0213ed90 d0: 00000000 d1: 00000000 d2: 00000000 d3: 000000ff d4: 00000002 d5: 02983590 a0: 02332e00 a1: 022dfd64 Process dd (pid: 285, task=020ab25b) Frame format=B ssw=074d isc=4a88 isb=6732 daddr=00000198 dobuf=00000000 baddr=001be5bc dibuf=bfffffff ver=f Stack from 022dfca4: 00000000 0203fc00 0213ed90 022dfcc0 02982936 00000000 00200000 022dfd08 0020f85a 00200000 022dfd64 02332e00 004040fc 00000014 001be77e 022dfd64 00334e4a 001be3f8 0800001d 022dfd64 01c04b60 01c04b70 022aba80 029828f8 02332e00 022dfd2c 001be7ac 0203fc00 00200000 022dfd64 02103a00 01c04b60 01c04b60 0200e400 022dfd68 000e191a 00200000 022dfd64 02103a00 0800001d 00000000 00000003 000b89de 00500000 02103a00 01c04b60 02103a08 01c04c2e Call Trace: [<02982936>] floppy_find+0x3e/0x4a [swim_mod] [<00200000>] uart_remove_one_port+0x1a2/0x260 [<0020f85a>] kobj_lookup+0xde/0x132 [<00200000>] uart_remove_one_port+0x1a2/0x260 [<001be77e>] get_gendisk+0x0/0x130 [<00334e4a>] mutex_lock+0x0/0x2e [<001be3f8>] disk_block_events+0x0/0x6c [<029828f8>] floppy_find+0x0/0x4a [swim_mod] [<001be7ac>] get_gendisk+0x2e/0x130 [<00200000>] uart_remove_one_port+0x1a2/0x260 [<000e191a>] __blkdev_get+0x32/0x45a [<00200000>] uart_remove_one_port+0x1a2/0x260 [<000b89de>] complete_walk+0x0/0x8a [<000e1e22>] blkdev_get+0xe0/0x29a [<000e1fdc>] blkdev_open+0x0/0xb0 [<000b89de>] complete_walk+0x0/0x8a [<000e1fdc>] blkdev_open+0x0/0xb0 [<000e01cc>] bd_acquire+0x74/0x8a [<000e205c>] blkdev_open+0x80/0xb0 [<000e1fdc>] blkdev_open+0x0/0xb0 [<000abf24>] do_dentry_open+0x1a4/0x322 [<00020000>] __do_proc_douintvec+0x22/0x27e [<000b89de>] complete_walk+0x0/0x8a [<000baa62>] link_path_walk+0x0/0x48e [<000ba3f8>] inode_permission+0x20/0x54 [<000ac0e4>] vfs_open+0x42/0x78 [<000bc372>] path_openat+0x2b2/0xeaa [<000bc0c0>] path_openat+0x0/0xeaa [<0004463e>] __irq_wake_thread+0x0/0x4e [<0003a45a>] task_tick_fair+0x18/0xc8 [<000bd00a>] do_filp_open+0xa0/0xea [<000abae0>] do_sys_open+0x11a/0x1ee [<00020000>] __do_proc_douintvec+0x22/0x27e [<000abbf4>] SyS_open+0x1e/0x22 [<00020000>] __do_proc_douintvec+0x22/0x27e [<00002b40>] syscall+0x8/0xc [<00020000>] __do_proc_douintvec+0x22/0x27e [<0000c00b>] dyadic+0x1/0x28 Code: 4e5e 4e75 4e56 fffc 2f0b 2f02 266e 0008 <206b> 0198 4a88 6732 2428 002c 661e 486b 0058 4eb9 0032 0b96 588f 4a88 672c 2008 Disabling lock debugging due to kernel taint Fix the array index bounds check to avoid this. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Fixes: 8852ecd9 ("[PATCH] m68k: mac - Add SWIM floppy support") Tested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Finn Thain authored
commit b3906535 upstream. The driver supports internal and external FDD units so the floppy_open function must not hard-code the drive location. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit 56a1c5ee upstream. The Sony drive status bits use active-low logic. The swim_readbit() function converts that to 'C' logic for readability. Hence, the sense of the names of the status bit macros should not be inverted. Mostly they are correct. However, the TWOMEG_DRIVE, MFM_MODE and TWOMEG_MEDIA macros have inverted sense (like MkLinux). Fix this inconsistency and make the following patches less confusing. The same problem affects swim3.c so fix that too. No functional change. The FDHD drive status bits are documented in sonydriv.cpp from MAME and in swimiii.h from MkLinux. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit c1d6207c upstream. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Fixes: 103db8b2 ("[PATCH] swim: stop sharing request queue across multiple gendisks") Tested-by:
-
Finn Thain authored
commit 8e2ab5a4 upstream. The 'eject' shell command may send various different ioctl commands. This leads to error messages on the console even though the FDEJECT ioctl succeeds. ~# eject floppy SWIM floppy_ioctl: unknown cmd 21257 SWIM floppy_ioctl: unknown cmd 1 Don't log an error message for an invalid ioctl, just do as the swim3 driver does and return -ENOTTY. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit 8a500df6 upstream. The SWIM chip is compatible with GCR-mode Sony 400K/800K drives but this driver only supports MFM mode. Therefore only Sony FDHD drives are supported. Skip incompatible drives. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Finn Thain authored
commit b64576cb upstream. For reasons I don't understand, calling ioremap() then iounmap() on the SWIM MMIO region causes a hang on 68030 (but not on 68040). ~# modprobe swim_mod SWIM floppy driver Version 0.2 (2008-10-30) SWIM device not found ! watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:285] Modules linked in: swim_mod(+) Format 00 Vector: 0064 PC: 000075aa Status: 2000 Not tainted ORIG_D0: ffffffff D0: d00c0000 A2: 007c2370 A1: 003f810c A0: 00040000 D5: d0096800 D4: d0097e00 D3: 00000001 D2: 00000003 D1: 00000000 Non-Maskable Interrupt Modules linked in: swim_mod(+) PC: [<000075ba>] __iounmap+0x24/0x10e SR: 2000 SP: 007abc48 a2: 007c2370 d0: d00c0000 d1: 000001a0 d2: 00000019 d3: 00000001 d4: d0097e00 d5: d0096800 a0: 00040000 a1: 003f810c Process modprobe (pid: 285, task=007c2370) Frame format=0 Stack from 007abc7c: ffffffed 00000000 006a4060 004712e0 007abca0 000076ea d0080000 00080000 010bb4b8 007abcd8 010ba542 d0096000 00000000 00000000 00000001 010bb59c 00000000 007abf30 010bb4b8 0047760a 0047763c 00477612 00616540 007abcec 0020a91a 00477600 0047760a 010bb4cc 007abd18 002092f2 0047760a 00333b06 007abd5c 00000000 0047760a 010bb4cc 00404f90 004776b8 00000001 007abd38 00209446 010bb4cc 0047760a 010bb4cc 0020938e 0031f8be 00616540 007abd64 Call Trace: [<000076ea>] iounmap+0x46/0x5a [<00080000>] shrink_page_list+0x7f6/0xe06 [<010ba542>] swim_probe+0xe4/0x496 [swim_mod] [<0020a91a>] platform_drv_probe+0x20/0x5e [<002092f2>] driver_probe_device+0x21c/0x2b8 [<00333b06>] mutex_lock+0x0/0x2e [<00209446>] __driver_attach+0xb8/0xce [<0020938e>] __driver_attach+0x0/0xce [<0031f8be>] klist_next+0x0/0xa0 [<00207562>] bus_for_each_dev+0x74/0xba [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<00333b06>] mutex_lock+0x0/0x2e [<00208e44>] driver_attach+0x1a/0x1e [<0020938e>] __driver_attach+0x0/0xce [<00207e26>] bus_add_driver+0x188/0x234 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<00209894>] driver_register+0x58/0x104 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<010bd000>] swim_init+0x0/0x2c [swim_mod] [<0020a7be>] __platform_driver_register+0x38/0x3c [<010bd028>] swim_init+0x28/0x2c [swim_mod] [<000020dc>] do_one_initcall+0x38/0x196 [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<00075008>] __free_pages+0x0/0x38 [<000045c0>] mangle_kernel_stack+0x30/0xda [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<003331cc>] mutex_unlock+0x0/0x3e [<00333b06>] mutex_lock+0x0/0x2e [<0005ced4>] do_init_module+0x42/0x266 [<010bd000>] swim_init+0x0/0x2c [swim_mod] [<000344c0>] blocking_notifier_call_chain+0x0/0x20 [<0005eda0>] load_module+0x1a30/0x1e70 [<0000465d>] mangle_kernel_stack+0xcd/0xda [<00331c64>] __generic_copy_from_user+0x0/0x46 [<0033256e>] _cond_resched+0x0/0x32 [<00331b9c>] memset+0x0/0x98 [<0033256e>] _cond_resched+0x0/0x32 [<0005f25c>] SyS_init_module+0x7c/0x112 [<00002000>] _start+0x0/0x8 [<00002000>] _start+0x0/0x8 [<00331c82>] __generic_copy_from_user+0x1e/0x46 [<0005f2b2>] SyS_init_module+0xd2/0x112 [<0000465d>] mangle_kernel_stack+0xcd/0xda [<00002b40>] syscall+0x8/0xc [<0000465d>] mangle_kernel_stack+0xcd/0xda [<0008c00c>] pcpu_balance_workfn+0xb2/0x40e Code: 2200 7419 e4a9 e589 2841 d9fc 0000 1000 <2414> 7203 c282 7602 b681 6600 0096 0242 fe00 0482 0000 0000 e9c0 11c3 ed89 2642 There's no need to call ioremap() for the SWIM address range, as it lies within the usual IO device region at 0x5000 0000, which has already been mapped by head.S. Remove the redundant ioremap() and iounmap() calls to fix the hang. Cc: Laurent Vivier <lvivier@redhat.com> Cc: stable@vger.kernel.org # v4.14+ Tested-by:
-
Robert Kolchmeyer authored
commit d90a10e2 upstream. fsnotify() acquires a reference to a fsnotify_mark_connector through the SRCU-protected pointer to_tell->i_fsnotify_marks. However, it appears that no precautions are taken in fsnotify_put_mark() to ensure that fsnotify() drops its reference to this fsnotify_mark_connector before assigning a value to its 'destroy_next' field. This can result in fsnotify_put_mark() assigning a value to a connector's 'destroy_next' field right before fsnotify() tries to traverse the linked list referenced by the connector's 'list' field. Since these two fields are members of the same union, this behavior results in a kernel panic. This issue is resolved by moving the connector's 'destroy_next' field into the object pointer union. This should work since the object pointer access is protected by both a spinlock and the value of the 'flags' field, and the 'flags' field is cleared while holding the spinlock in fsnotify_put_mark() before 'destroy_next' is updated. It shouldn't be possible for another thread to accidentally read from the object pointer after the 'destroy_next' field is updated. The offending behavior here is extremely unlikely; since fsnotify_put_mark() removes references to a connector (specifically, it ensures that the connector is unreachable from the inode it was formerly attached to) before updating its 'destroy_next' field, a sizeable chunk of code in fsnotify_put_mark() has to execute in the short window between when fsnotify() acquires the connector reference and saves the value of its 'list' field. On the HEAD kernel, I've only been able to reproduce this by inserting a udelay(1) in fsnotify(). However, I've been able to reproduce this issue without inserting a udelay(1) anywhere on older unmodified release kernels, so I believe it's worth fixing at HEAD. References: https://bugzilla.kernel.org/show_bug.cgi?id=199437 Fixes: 08991e83 CC: stable@vger.kernel.org Signed-off-by:
Robert Kolchmeyer <rkolchmeyer@google.com> Signed-off-by:
-
Dan Carpenter authored
commit 9de4ee40 upstream. This cast is wrong. "cdi->capacity" is an int and "arg" is an unsigned long. The way the check is written now, if one of the high 32 bits is set then we could read outside the info->slots[] array. This bug is pretty old and it predates git. Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
commit 94e5395d upstream. First generation MPT Fusion controllers can not translate WRITE SAME when the attached device is a SATA drive. Disable WRITE SAME support. Reported-by:
Nikola Ciprich <nikola.ciprich@linuxbox.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
