- 27 Nov, 2018 1 commit
-
-
Colin Ian King authored
[ Upstream commit 8c6c9bed ] There is a null check on dst_file->private data which suggests it can be potentially null. However, before this check, pointer smb_file_target is derived from dst_file->private and dereferenced in the call to tlink_tcon, hence there is a potential null pointer deference. Fix this by assigning smb_file_target and target_tcon after the null pointer sanity checks. Detected by CoverityScan, CID#1475302 ("Dereference before null check") Fixes: 04b38d60 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- 23 Nov, 2018 22 commits
-
-
Greg Kroah-Hartman authored
-
Chris Paterson authored
commit 1dfc65ce upstream. The R-Car M2N hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: 57f9156b ("ARM: dts: r8a7793: enable to use thermal-zone") Signed-off-by:
Chris Paterson <chris.paterson2@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Paterson authored
commit e4fdf59b upstream. The R-Car M2W hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: cac68a56 ("ARM: dts: r8a7791: enable to use thermal-zone") Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 8a13906a which is commit 53c613fe upstream. It's not ready for the stable trees as there are major slowdowns involved with this patch. Reported-by:
Jiri Kosina <jkosina@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "WoodhouseDavid" <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "SchauflerCasey" <casey.schaufler@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0d5b9311 ] Multiple cpus might attempt to insert a new fragment in rhashtable, if for example RPS is buggy, as reported by 배석진 in https://patchwork.ozlabs.org/patch/994601/ We use rhashtable_lookup_get_insert_key() instead of rhashtable_insert_fast() to let cpus losing the race free their own inet_frag_queue and use the one that was inserted by another cpu. Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
배석진 <soukjin.bae@samsung.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Frieder Schrempf authored
[ Upstream commit 7b900ead ] We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d1694 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by:
Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 85b18b02 ] The commit f77f0aee ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee ("net: use core MTU range checking in USB NIC drivers") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Shalom Toledo authored
[ Upstream commit 96801552 ] The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit e1e46479 ] Different from processing the addstrm_out request, The receiver handles an addstrm_in request by sending back an addstrm_out request to the sender who will increase its stream's in and incnt later. Now stream->incnt has been increased since it sent out the addstrm_in request in sctp_send_add_streams(), with the wrong stream->incnt will even cause crash when copying stream info from the old stream's in to the new one's in sctp_process_strreset_addstrm_out(). This patch is to fix it by simply removing the stream->incnt change from sctp_send_add_streams(). Fixes: 242bd2d5 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Martin Schiller authored
[ Upstream commit df5a8ec6 ] Up until commit 7e5fbd1e ("net: mdio-gpio: Convert to use gpiod functions where possible"), the _cansleep variants of the gpio_ API was used. After that commit and the change to gpiod_ API, the _cansleep() was dropped. This then results in WARN_ON() when used with GPIO devices which do sleep. Add back the _cansleep() to avoid this. Fixes: 7e5fbd1e ("net: mdio-gpio: Convert to use gpiod functions where possible") Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit fd82d61b ] As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153f ("sctp: add support for generating add stream change event notification") Reported-by:
-
Tristram Ha authored
[ Upstream commit 284fb78e ] Initialize mutex before use. Avoid kernel complaint when CONFIG_DEBUG_LOCK_ALLOC is enabled. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
-
Subash Abhinov Kasiviswanathan authored
[ Upstream commit d02854dc ] A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 7cb6a2a2 ] A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0f ("net: systemport: add suspend and resume support") Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
-
Matthew Cover authored
[ Upstream commit 8ebebcba ] When writing packets to a descriptor associated with a combined queue, the packets should end up on that queue. Before this change all packets written to any descriptor associated with a tap interface end up on rx-0, even when the descriptor is associated with a different queue. The rx traffic can be generated by either of the following. 1. a simple tap program which spins up multiple queues and writes packets to each of the file descriptors 2. tx from a qemu vm with a tap multiqueue netdev The queue for rx traffic can be observed by either of the following (done on the hypervisor in the qemu case). 1. a simple netmap program which opens and reads from per-queue descriptors 2. configuring RPS and doing per-cpu captures with rxtxcpu Alternatively, if you printk() the return value of skb_get_rx_queue() just before each instance of netif_receive_skb() in tun.c, you will get 65535 for every skb. Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes the association between descriptor and rx queue. Signed-off-by:
Matthew Cover <matthew.cover@stackpath.com> Signed-off-by:
-
Siva Reddy Kallam authored
[ Upstream commit 59663e42 ] This patch has the fix to avoid PHY lockup with 5717/5719/5720 in change ring and flow control paths. This patch solves the RX hang while doing continuous ring or flow control parameters with heavy traffic from peer. Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit cc3ccf26 ] As rfc7496#section4.5 says about SCTP_PR_SUPPORTED: This socket option allows the enabling or disabling of the negotiation of PR-SCTP support for future associations. For existing associations, it allows one to query whether or not PR-SCTP support was negotiated on a particular association. It means only sctp sock's prsctp_enable can be set. Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux sctp in another patchset. v1->v2: - drop the params.assoc_id check as Neil suggested. Fixes: 28aa4c26 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 33d9a2c7 ] eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab ("gro: Add internal interfaces for VLAN") Signed-off-by:
-
David Ahern authored
[ Upstream commit 7ddacfa5 ] Preethi reported that PMTU discovery for UDP/raw applications is not working in the presence of VRF when the socket is not bound to a device. The problem is that ip6_sk_update_pmtu does not consider the L3 domain of the skb device if the socket is not bound. Update the function to set oif to the L3 master device if relevant. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Reported-by:
Preethi Ramachandra <preethir@juniper.net> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 16f7eb2b ] The various types of tunnels running over IPv4 can ask to set the DF bit to do PMTU discovery. However, PMTU discovery is subject to the threshold set by the net.ipv4.route.min_pmtu sysctl, and is also disabled on routes with "mtu lock". In those cases, we shouldn't set the DF bit. This patch makes setting the DF bit conditional on the route's MTU locking state. This issue seems to be older than git history. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Michał Mirosław authored
[ Upstream commit e84b4794 ] Don't request tag insertion when it isn't present in outgoing skb. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
배석진 authored
[ Upstream commit 62230715 ] Only first fragment has the sport/dport information, not the following ones. If we want consistent hash for all fragments, we need to ignore ports even for first fragment. This bug is visible for IPv6 traffic, if incoming fragments do not have a flow label, since skb_get_hash() will give different results for first fragment and following ones. It is also visible if any routing rule wants dissection and sport or dport. See commit 5e5d6fed ("ipv6: route: dissect flow in input path if fib rules need it") for details. [edumazet] rewrote the changelog completely. Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by:
-
- 21 Nov, 2018 17 commits
-
-
Greg Kroah-Hartman authored
-
Doug Berger authored
commit 142c168e upstream. The basic memory-mapped GPIO controller lock must be released before calling the registered GPIO interrupt handlers to allow the interrupt handlers to access the hardware. Examples of why a GPIO interrupt handler might want to access the GPIO hardware include an interrupt that is configured to trigger on rising and falling edges that needs to read the current level of the input to know how to respond, or an interrupt that causes a change in a GPIO output in the same bank. If the lock is not released before enterring the handler the hardware accesses will deadlock when they attempt to grab the lock. Since the lock is only needed to protect the calculation of unmasked pending interrupts create a dedicated function to perform this and hide the complexity. Fixes: 19a7b694 ("gpio: brcmstb: Add interrupt and wakeup source support") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Ming Lei authored
commit 11d9ea6f upstream. When nvmet_req_init() fails, __nvmet_req_complete() is called to handle the target request via .queue_response(), so nvme_loop_queue_response() shouldn't be called again for handling the failure. This patch fixes this case by the following way: - move blk_mq_start_request() before nvmet_req_init(), so nvme_loop_queue_response() may work well to complete this host request - don't call nvme_cleanup_cmd() which is done in nvme_loop_complete_rq() - don't call nvme_loop_queue_response() which is done via .queue_response() Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> [trimmed changelog] Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Sergey Senozhatsky authored
commit fd5f7cde upstream. This patch, basically, reverts commit 6b97a20d ("printk: set may_schedule for some of console_trylock() callers"). That commit was a mistake, it introduced a big dependency on the scheduler, by enabling preemption under console_sem in printk()->console_unlock() path, which is rather too critical. The patch did not significantly reduce the possibilities of printk() lockups, but made it possible to stall printk(), as has been reported by Tetsuo Handa [1]. Another issues is that preemption under console_sem also messes up with Steven Rostedt's hand off scheme, by making it possible to sleep with console_sem both in console_unlock() and in vprintk_emit(), after acquiring the console_sem ownership (anywhere between printk_safe_exit_irqrestore() in console_trylock_spinning() and printk_safe_enter_irqsave() in console_unlock()). This makes hand off less likely and, at the same time, may result in a significant amount of pending logbuf messages. Preempted console_sem owner makes it impossible for other CPUs to emit logbuf messages, but does not make it impossible for other CPUs to append new messages to the logbuf. Reinstate the old behavior and make printk() non-preemptible. Should any printk() lockup reports arrive they must be handled in a different way. [1] http://lkml.kernel.org/r/201603022101.CAH73907.OVOOMFHFFtQJSL%20()%20I-love%20!%20SAKURA%20!%20ne%20!%20jp Fixes: 6b97a20d ("printk: set may_schedule for some of console_trylock() callers") Link: http://lkml.kernel.org/r/20180116044716.GE6607@jagdpanzerIV To: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: akpm@linux-foundation.org Cc: linux-mm@kvack.org Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Miklos Szeredi authored
commit 5e127580 upstream. Kaixuxia repors that it's possible to crash overlayfs by removing the whiteout on the upper layer before creating a directory over it. This is a reproducer: mkdir lower upper work merge touch lower/file mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge rm merge/file ls -al merge/file rm upper/file ls -al merge/ mkdir merge/file Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the lookup of "upper" is positive and is a whiteout, and return ESTALE otherwise. Reported by: kaixuxia <xiakaixu1987@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: e9be9d5e ("overlay filesystem") Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by:
-
Stefano Stabellini authored
commit f9005571 upstream. xen_create_contiguous_region has now only an implementation if CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but we do have an implementation of xen_create_contiguous_region which is required for swiotlb-xen to work correctly (although it just sets *dma_handle). [backport: remove change to xen_remap_pfn] Cc: <stable@vger.kernel.org> # 4.12 Fixes: 16624390 ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds") Signed-off-by:
Stefano Stabellini <stefanos@xilinx.com> Reviewed-by:
Juergen Gross <jgross@suse.com> CC: Jeff.Kubascik@dornerworks.com CC: Jarvis.Roach@dornerworks.com CC: Nathan.Studer@dornerworks.com CC: vkuznets@redhat.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: julien.grall@arm.com Signed-off-by:
-
Chris Wilson authored
commit 0a823e8f upstream. Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit 987abd5c) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
commit 0014868b upstream. Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by:
Sergii Romantsov <sergii.romantsov@globallogic.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1) Signed-off-by:
-
Ville Syrjälä authored
commit 6a8915d0 upstream. We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.comReviewed-by:
-
Clint Taylor authored
commit 65034931 upstream. HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3) Signed-off-by:
-
Chris Wilson authored
commit ab0d6a14 upstream. Handle integer overflow when computing the sub-page length for shmem backed pread/pwrite. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Lyude Paul authored
commit c02ba4ef upstream. Since we need to be able to allow DPMS on->off prop changes after an MST port has disappeared from the system, we need to be able to make sure we can compute a config for the resulting atomic commit. Currently this is impossible when the port has disappeared, since the VCPI slot searching we try to do in intel_dp_mst_compute_config() will fail with -EINVAL. Since the only commits we want to allow on no-longer-present MST ports are ones that shut off display hardware, we already know that no VCPI allocations are needed. So, hardcode the VCPI slot count to 0 when intel_dp_mst_compute_config() is called on an MST port that's gone. Changes since V4: - Don't use mst_port_gone at all, just check whether or not the drm connector is registered - Daniel Vetter Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com (cherry picked from commit f67207d7) Signed-off-by:
-
Lyude Paul authored
commit 80c18869 upstream. Currently we set intel_connector->mst_port to NULL to signify that the MST port has been removed from the system so that we can prevent further action on the port such as connector probes, mode probing, etc. However, we're going to need access to intel_connector->mst_port in order to fixup ->best_encoder() so that it can always return the correct encoder for an MST port to prevent legacy DPMS prop changes from failing. This should be safe, so instead keep intel_connector->mst_port always set and instead just check the status of drm_connector->regustered to signify whether or not the connector has disappeared from the system. Changes since v2: - Add a comment to mst_port_gone (Jani Nikula) - Change mst_port_gone to a u8 instead of a bool, per the kernel bot. Apparently bool is discouraged in structs these days Changes since v4: - Don't use mst_port_gone at all! Just check if the connector is registered or not - Daniel Vetter Signed-off-by:
-
Ville Syrjälä authored
commit 7cada4d0 upstream. Plane sanitation needs vblank interrupts (on account of CxSR disable). So let's restore vblank interrupts earlier. v2: Make it actually build v3: Add comment to explain why we need this (Daniel) Cc: stable@vger.kernel.org Cc: Dennis <dennis.nezic@utoronto.ca> Tested-by:
Dennis <dennis.nezic@utoronto.ca> Tested-by:
Peter Nowee <peter.nowee@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 Fixes: b1e01595 ("drm/i915: Redo plane sanitation during readout") Signed-off-by:
-
Stanislav Lisovskiy authored
commit 23d80039 upstream. Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.comSigned-off-by:
-
Lyude Paul authored
commit dc854914 upstream. Remember, ida IDs start at 0, not 1! Signed-off-by:
Karol Herbst <kherbst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d9997b64 upstream. This caused a confusing error message, but there is functionally no problem since the default method is DIRECT. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
