- 01 Apr, 2014 40 commits
-
-
Anton Blanchard authored
commit 0a13404d upstream. The unix socket code is using the result of csum_partial to hash into a lookup table: unix_hash_fold(csum_partial(sunaddr, len, 0)); csum_partial is only guaranteed to produce something that can be folded into a checksum, as its prototype explains: * returns a 32-bit number suitable for feeding into itself * or csum_tcpudp_magic The 32bit value should not be used directly. Depending on the alignment, the ppc64 csum_partial will return different 32bit partial checksums that will fold into the same 16bit checksum. This difference causes the following testcase (courtesy of Gustavo) to sometimes fail: #include <sys/socket.h> #include <stdio.h> int main() { int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); int i = 1; setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4); struct sockaddr addr; addr.sa_family = AF_LOCAL; bind(fd, &addr, 2); listen(fd, 128); struct sockaddr_storage ss; socklen_t sslen = (socklen_t)sizeof(ss); getsockname(fd, (struct sockaddr*)&ss, &sslen); fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){ perror(NULL); return 1; } printf("OK\n"); return 0; } As suggested by davem, fix this by using csum_fold to fold the partial 32bit checksum into a 16bit checksum before using it. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Amitkumar Karwar authored
commit c99b1861 upstream. While preparing association request, intersection of device's HT capability information and corresponding fields advertised by AP is used. This patch fixes an error while copying this field from AP's beacon. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Johannes Berg authored
commit 864a6040 upstream. Avoid leaking data by sending uninitialized memory and setting an invalid (non-zero) fragment number (the sequence number is ignored anyway) by setting the seq_ctrl field to zero. Fixes: 3f52b7e3 ("mac80211: mesh power save basics") Fixes: ce662b44 ("mac80211: send (QoS) Null if no buffered frames") Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: Drop change to mps_qos_null_get()] Signed-off-by:
-
Takashi Iwai authored
commit e805ca8b upstream. Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jan Kara authored
commit 15c34a76 upstream. Global quota files are accessed from different nodes. Thus we cannot cache offset of quota structure in the quota file after we drop our node reference count to it because after that moment quota structure may be freed and reallocated elsewhere by a different node resulting in corruption of quota file. Fix the problem by clearing dq_off when we are releasing dquot structure. We also remove the DB_READ_B handling because it is useless - DQ_ACTIVE_B is set iff DQ_READ_B is set. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 45ab2813 upstream. If a module fails to add its tracepoints due to module tainting, do not create the module event infrastructure in the debugfs directory. As the events will not work and worse yet, they will silently fail, making the user wonder why the events they enable do not display anything. Having a warning on module load and the events not visible to the users will make the cause of the problem much clearer. Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org Fixes: 6d723736 "tracing/events: add support for modules to TRACE_EVENT" Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Marc Kleine-Budde authored
commit d96e43e8 upstream. This patch adds the missing netif_napi_del() to the flexcan_remove() function. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Marc Kleine-Budde authored
commit 7e9e148a upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by:
-
Marc Kleine-Budde authored
commit 5be93bdd upstream. When shutting down the CAN interface (ifconfig canX down) during high CAN bus loads, the CAN core might hang and freeze the whole CPU. This patch fixes the shutdown sequence by first disabling the CAN core then disabling all interrupts. Signed-off-by:
-
Laurent Dufour authored
commit f5295bd8 upstream. In copy_oldmem_page, the current check using max_pfn and min_low_pfn to decide if the page is backed or not, is not valid when the memory layout is not continuous. This happens when running as a QEMU/KVM guest, where RTAS is mapped higher in the memory. In that case max_pfn points to the end of RTAS, and a hole between the end of the kdump kernel and RTAS is not backed by PTEs. As a consequence, the kdump kernel is crashing in copy_oldmem_page when accessing in a direct way the pages in that hole. This fix relies on the memblock's service memblock_is_region_memory to check if the read page is part or not of the directly accessible memory. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Li Zefan authored
commit 99afb0fd upstream. It's not safe to access task's cpuset after releasing task_lock(). Holding callback_mutex won't help. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit e3703f8c upstream. Drew Richardson reported that he could make the kernel go *boom* when hotplugging while having perf events active. It turned out that when you have a group event, the code in __perf_event_exit_context() fails to remove the group siblings from the context. We then proceed with destroying and freeing the event, and when you re-plug the CPU and try and add another event to that CPU, things go *boom* because you've still got dead entries there. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/n/tip-k6v5wundvusvcseqj1si0oz0@git.kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 26e61e89 upstream. Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures, with perf WARN_ON()s triggering. He also provided traces of the failures. This is I think the relevant bit: > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_disable: x86_pmu_disable > pec_1076_warn-2804 [000] d... 147.926153: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926156: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926158: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926159: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1 > pec_1076_warn-2804 [000] d... 147.926161: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926162: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926163: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926166: collect_events: Adding event: 1 (ffff880119ec8800) So we add the insn:p event (fd[23]). At this point we should have: n_events = 2, n_added = 1, n_txn = 1 > pec_1076_warn-2804 [000] d... 147.926170: collect_events: Adding event: 0 (ffff8800c9e01800) > pec_1076_warn-2804 [000] d... 147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00) We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]). These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so that's not visible. group_sched_in() pmu->start_txn() /* nop - BP pmu */ event_sched_in() event->pmu->add() So here we should end up with: 0: n_events = 3, n_added = 2, n_txn = 2 4: n_events = 4, n_added = 3, n_txn = 3 But seeing the below state on x86_pmu_enable(), the must have failed, because the 0 and 4 events aren't there anymore. Looking at group_sched_in(), since the BP is the leader, its event_sched_in() must have succeeded, for otherwise we would not have seen the sibling adds. But since neither 0 or 4 are in the below state; their event_sched_in() must have failed; but I don't see why, the complete state: 0,0,1:p,4 fits perfectly fine on a core2. However, since we try and schedule 4 it means the 0 event must have succeeded! Therefore the 4 event must have failed, its failure will have put group_sched_in() into the fail path, which will call: event_sched_out() event->pmu->del() on 0 and the BP event. Now x86_pmu_del() will reduce n_events; but it will not reduce n_added; giving what we see below: n_event = 2, n_added = 2, n_txn = 2 > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_enable: x86_pmu_enable > pec_1076_warn-2804 [000] d... 147.926177: x86_pmu_state: Events: { > pec_1076_warn-2804 [000] d... 147.926179: x86_pmu_state: 0: state: .R config: ffffffffffffffff ( (null)) > pec_1076_warn-2804 [000] d... 147.926181: x86_pmu_state: 33: state: AR config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926182: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2 > pec_1076_warn-2804 [000] d... 147.926184: x86_pmu_state: Assignment: { > pec_1076_warn-2804 [000] d... 147.926186: x86_pmu_state: 0->33 tag: 1 config: 0 (ffff88011ac99800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: 1->0 tag: 1 config: 1 (ffff880119ec8800) > pec_1076_warn-2804 [000] d... 147.926188: x86_pmu_state: } > pec_1076_warn-2804 [000] d... 147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0 So the problem is that x86_pmu_del(), when called from a group_sched_in() that fails (for whatever reason), and without x86_pmu TXN support (because the leader is !x86_pmu), will corrupt the n_added state. Reported-and-Tested-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
-
George McCollister authored
commit 791c9e02 upstream. dequeue_entity() is called when p->on_rq and sets se->on_rq = 0 which appears to guarentee that the !se->on_rq condition is met. If the task has done set_current_state(TASK_INTERRUPTIBLE) without schedule() the second condition will be met and vruntime will be incorrectly adjusted twice. In certain cases this can result in the task's vruntime never increasing past the vruntime of other tasks on the CFS' run queue, starving them of CPU time. This patch changes switched_from_fair() to use !p->on_rq instead of !se->on_rq. I'm able to cause a task with a priority of 120 to starve all other tasks with the same priority on an ARM platform running 3.2.51-rt72 PREEMPT RT by writing one character at time to a serial tty (16550 UART) in a tight loop. I'm also able to verify making this change corrects the problem on that platform and kernel version. Signed-off-by:
George McCollister <george.mccollister@gmail.com> Signed-off-by:
-
Chuansheng Liu authored
commit c685689f upstream. We hit one rare case below: T1 calling disable_irq(), but hanging at synchronize_irq() always; The corresponding irq thread is in sleeping state; And all CPUs are in idle state; After analysis, we found there is one possible scenerio which causes T1 is waiting there forever: CPU0 CPU1 synchronize_irq() wait_event() spin_lock() atomic_dec_and_test(&threads_active) insert the __wait into queue spin_unlock() if(waitqueue_active) atomic_read(&threads_active) wake_up() Here after inserted the __wait into queue on CPU0, and before test if queue is empty on CPU1, there is no barrier, it maybe cause it is not visible for CPU1 immediately, although CPU0 has updated the queue list. It is similar for CPU0 atomic_read() threads_active also. So we'd need one smp_mb() before waitqueue_active.that, but removing the waitqueue_active() check solves it as wel l and it makes things simple and clear. Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Cc: Xiaoming Wang <xiaoming.wang@intel.com> Link: http://lkml.kernel.org/r/1393212590-32543-1-git-send-email-chuansheng.liu@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: The corresponding check is in irq_thread()] Signed-off-by:
-
Johannes Berg authored
commit 143582c6 upstream. Only the first packet is currently handled correctly, but then all others are assumed to have failed which is problematic. Fix this, marking them all successful instead (since if they're not then the firmware will have transmitted them as single frames.) This fixes the lost packet reporting. Also do a tiny variable scoping cleanup. Signed-off-by:
-
Takashi Iwai authored
commit b3619b28 upstream. There is a typo in the Limiter2 Release Rate control, a wrong enum for Limiter1 is assigned. It must point to Limiter2. Spotted by a compile warning: In file included from sound/soc/codecs/sta32x.c:34:0: sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable] static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’ struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \ ^ sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’ static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit a1227f3c upstream. ehci_irq() and ehci_hrtimer_func() can deadlock on ehci->lock when threadirqs option is used. To prevent the deadlock use spin_lock_irqsave() in ehci_irq(). This change can be reverted when hrtimer callbacks become threaded. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Joerg Dorchain authored
commit 6dbd46c8 upstream. Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by:
Joerg Dorchain <joerg@dorchain.net> Signed-off-by:
-
Алексей Крамаренко authored
commit e1466ad5 upstream. Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by:
Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by:
-
Lan Tianyu authored
commit f3ca4164 upstream. acpi_processor_set_throttling() uses set_cpus_allowed_ptr() to make sure that the (struct acpi_processor)->acpi_processor_set_throttling() callback will run on the right CPU. However, the function may be called from a worker thread already bound to a different CPU in which case that won't work. Make acpi_processor_set_throttling() use work_on_cpu() as appropriate instead of abusing set_cpus_allowed_ptr(). Reported-and-tested-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> [rjw: Changelog] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Williams authored
commit da87ca4d upstream. Since commit 77873803 "net_dma: mark broken" we no longer pin dma engines active for the network-receive-offload use case. As a result the ->free_chan_resources() that occurs after the driver self test no longer has a NET_DMA induced ->alloc_chan_resources() to back it up. A late firing irq can lead to ksoftirqd spinning indefinitely due to the tasklet_disable() performed by ->free_chan_resources(). Only ->alloc_chan_resources() can clear this condition in affected kernels. This problem has been present since commit 3e037454 "I/OAT: Add support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the NET_DMA use case is deprecated we can revisit moving the driver to use threaded irqs. For now, just tear down the irq and tasklet properly by: 1/ Disable the irq from triggering the tasklet 2/ Disable the irq from re-arming 3/ Flush inflight interrupts 4/ Flush the timer 5/ Flush inflight tasklets References: https://lkml.org/lkml/2014/1/27/282 https://lkml.org/lkml/2014/2/19/672 Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Reported-by:
Mike Galbraith <bitbucket@online.de> Reported-by:
Stanislav Fomichev <stfomichev@yandex-team.ru> Tested-by:
Dan Williams <dan.j.williams@intel.com> [bwh: Backported to 3.2: - Adjust context - As there is no ioatdma_device::irq_mode member, check pci_dev::msix_enabled instead] Signed-off-by:
-
Jean Delvare authored
commit 75135da0 upstream. pci_get_device() decrements the reference count of "from" (last argument) so when we break off the loop successfully we have only one device reference - and we don't know which device we have. If we want a reference to each device, we must take them explicitly and let the pci_get_device() walk complete to avoid duplicate references. This is serious, as over-putting device references will cause the device to eventually disappear. Without this fix, the kernel crashes after a few insmod/rmmod cycles. Tested on an Intel S7000FC4UR system with a 7300 chipset. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Link: http://lkml.kernel.org/r/20140224111656.09bbb7ed@endymion.delvare Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Borislav Petkov <bp@suse.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jean Delvare authored
commit c0f5eeed upstream. The reference count changes done by pci_get_device can be a little misleading when the usage diverges from the most common scheme. The reference count of the device passed as the last parameter is always decreased, even if the function returns no new device. So if we are going to try alternative device IDs, we must manually increment the device reference count before each retry. If we don't, we end up decreasing the reference count, and after a few modprobe/rmmod cycles the PCI devices will vanish. In other words and as Alan put it: without this fix the EDAC code corrupts the PCI device list. This fixes kernel bug #50491: https://bugzilla.kernel.org/show_bug.cgi?id=50491Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Jan Kara authored
commit 1362f4ea upstream. Currently last dqput() can race with dquot_scan_active() causing it to call callback for an already deactivated dquot. The race is as follows: CPU1 CPU2 dqput() spin_lock(&dq_list_lock); if (atomic_read(&dquot->dq_count) > 1) { - not taken if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); ->release_dquot(dquot); if (atomic_read(&dquot->dq_count) > 1) - not taken dquot_scan_active() spin_lock(&dq_list_lock); if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) - not taken atomic_inc(&dquot->dq_count); spin_unlock(&dq_list_lock); - proceeds to release dquot ret = fn(dquot, priv); - called for inactive dquot Fix the problem by making sure possible ->release_dquot() is finished by the time we call the callback and new calls to it will notice reference dquot_scan_active() has taken and bail out. Signed-off-by:
-
Sujith Manoharan authored
commit b3050248 upstream. The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Reported-by:
Jeang Daniel <dyjeong@qca.qualcomm.com> Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 21f8aaee upstream. We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That is race condition which can result of doing list_del(&tid->list) twice (second time with poisoned list node) and cause crash like shown below: [424271.637220] BUG: unable to handle kernel paging request at 00100104 [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] ... [424271.639953] Call Trace: [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k] [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k] [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211] [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40 [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0 [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40 [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0 [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211] [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k] [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k] Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=70551Reported-and-tested-by:
Max Sydorenko <maxim.stargazer@gmail.com> Signed-off-by:
-
Eric Paris authored
commit 9085a642 upstream. When writing policy via /sys/fs/selinux/policy I wrote the type and class of filename trans rules in CPU endian instead of little endian. On x86_64 this works just fine, but it means that on big endian arch's like ppc64 and s390 userspace reads the policy and converts it from le32_to_cpu. So the values are all screwed up. Write the values in le format like it should have been to start. Signed-off-by:
Eric Paris <eparis@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit 1d147bfa upstream. There is a race between the TX path and the STA wakeup: while a station is sleeping, mac80211 buffers frames until it wakes up, then the frames are transmitted. However, the RX and TX path are concurrent, so the packet indicating wakeup can be processed while a packet is being transmitted. This can lead to a situation where the buffered frames list is emptied on the one side, while a frame is being added on the other side, as the station is still seen as sleeping in the TX path. As a result, the newly added frame will not be send anytime soon. It might be sent much later (and out of order) when the station goes to sleep and wakes up the next time. Additionally, it can lead to the crash below. Fix all this by synchronising both paths with a new lock. Both path are not fastpath since they handle PS situations. In a later patch we'll remove the extra skb queue locks to reduce locking overhead. BUG: unable to handle kernel NULL pointer dereference at 000000b0 IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211] *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1 EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211] EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000 ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000) iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9 Stack: e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0 ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210 ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002 Call Trace: [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211] [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211] [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211] [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211] [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211] [<c149ef70>] dev_hard_start_xmit+0x450/0x950 [<c14b9aa9>] sch_direct_xmit+0xa9/0x250 [<c14b9c9b>] __qdisc_run+0x4b/0x150 [<c149f732>] dev_queue_xmit+0x2c2/0xca0 Reported-by:
Yaara Rozenblum <yaara.rozenblum@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 7a6c0a58 upstream. wm8770 codec driver defines ain_enum with a wrong number of items. Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed. Signed-off-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Hans de Goede authored
commit bd8ba205 upstream. Some devices have duplicate entries in there brightness levels table, ie on my Dell Latitude E6430 the table looks like this: [ 3.686060] acpi backlight index 0, val 80 [ 3.686095] acpi backlight index 1, val 50 [ 3.686122] acpi backlight index 2, val 5 [ 3.686147] acpi backlight index 3, val 5 [ 3.686172] acpi backlight index 4, val 5 [ 3.686197] acpi backlight index 5, val 5 [ 3.686223] acpi backlight index 6, val 5 [ 3.686248] acpi backlight index 7, val 5 [ 3.686273] acpi backlight index 8, val 6 [ 3.686332] acpi backlight index 9, val 7 [ 3.686356] acpi backlight index 10, val 8 [ 3.686380] acpi backlight index 11, val 9 etc. Notice that brightness values 0-5 are all mapped to 5. This means that if userspace writes any value between 0 and 5 to the brightness sysfs attribute and then reads it, it will always return 0, which is somewhat unexpected. This is a problem for ie gnome-settings-daemon, which uses read-modify-write logic when the users presses the brightness up or down keys. This is done this way to take brightness changes from other sources into account. On this specific laptop what happens once the brightness has been set to 0, is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press again reads 0, so things get stuck at the lowest brightness setting. Filtering out the duplicate table entries, makes any write to brightness read back as the written value as one would expect, fixing this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 025c3fa9 upstream. Preset EQ enum of sta32x codec driver declares too many number of items and it may lead to the access over the actual array size. Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed. Signed-off-by:
-
Guenter Roeck authored
commit 500a9157 upstream. When trying to set the minimum temperature, the driver was erroneously writing the maximum temperature into the chip. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Tejun Heo authored
commit 532de3fc upstream. Currently, there's nothing preventing cgroup_enable_task_cg_lists() from missing set PF_EXITING and race against cgroup_exit(). Depending on the timing, cgroup_exit() may finish with the task still linked on css_set leading to list corruption. Fix it by grabbing siglock in cgroup_enable_task_cg_lists() so that PF_EXITING is guaranteed to be visible. This whole on-demand cg_list optimization is extremely fragile and has ample possibility to lead to bugs which can cause things like once-a-year oops during boot. I'm wondering whether the better approach would be just adding "cgroup_disable=all" handling which disables the whole cgroup rather than tempting fate with this on-demand craziness. Signed-off-by:
-
Lai Jiangshan authored
commit 5bdfff96 upstream. When a kworker should die, the kworkre is notified through WORKER_DIE flag instead of kthread_should_stop(). This, IIRC, is primarily to keep the test synchronized inside worker_pool lock. WORKER_DIE is first set while holding pool->lock, the lock is dropped and kthread_stop() is called. Unfortunately, this means that there's a slight chance that the target kworker may see WORKER_DIE before kthread_stop() finishes and exits and frees the target task before or during kthread_stop(). Fix it by pinning the target task before setting WORKER_DIE and putting it after kthread_stop() is done. tj: Improved patch description and comment. Moved pinning above WORKER_DIE for better signify what it's protecting. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
Aleksander Morgado authored
commit 12df84d4 upstream. This interface is to be handled by the qmi_wwan driver. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Alan Stern authored
commit 3e8d6d85 upstream. High-speed USB connections revert back to full-speed signalling when the device goes into suspend. This takes several milliseconds, and during that time it's not possible to tell reliably whether the device has been disconnected. On some platforms, the Wake-On-Disconnect circuitry gets confused during this intermediate state. It generates a false wakeup signal, which can prevent the controller from going to sleep. To avoid this problem, this patch adds a 5-ms delay to the ehci_bus_suspend() routine if any ports have to switch over to full-speed signalling. (Actually, the delay was already present for devices using a particular kind of PHY power management; the patch merely causes the delay to be used more widely.) Signed-off-by:
Peter Chen <Peter.Chen@freescale.com> Signed-off-by:
-
Levente Kurusa authored
commit 67809f85 upstream. Samsung's pci-e SSDs with device ID 0x1600 which are found on some macbooks time out on NCQ commands. Blacklist NCQ on the device so that the affected machines can at least boot. Original-patch-by:
Levente Kurusa <levex@linux.com> Signed-off-by:
-
Vinayak Kale authored
commit 39544ac9 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by:
Vinayak Kale <vkale@apm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Chen Gang authored
commit 8d80390c upstream. For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com> Signed-off-by:
-
