- 09 Mar, 2020 15 commits
-
-
Rohit Maheshwari authored
TCP segment can chop a record in any order. Record can either be complete or it can be partial (first part which contains header, middle part which doesn't have header or TAG, and the end part which contains TAG. This patch handles partial end part of a tx record. In case of partial end part's, driver will send complete record to HW, so that HW will calculate GHASH (TAG) of complete packet. Also added support to handle multiple records in a segment. v1->v2: - miner change in calling chcr_write_cpl_set_tcb_ulp. - no need of checking return value of chcr_ktls_write_tcp_options. v3->v4: - replaced kfree_skb with dev_kfree_skb_any. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rohit Maheshwari authored
Added tx handling in this patch. This includes handling of segments contain single complete record. v1->v2: - chcr_write_cpl_set_tcb_ulp is added in this patch. v3->v4: - mss calculation logic. - replaced kfree_skb with dev_kfree_skb_any. - corrected error message reported by kbuild test robot <lkp@intel.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rohit Maheshwari authored
As part of this patch generated and saved crypto keys, handled HW response of act_open_req and set_tcb_req. Defined connection state update. v1->v2: - optimized tcb update using control queue. - state machine handling when earlier states received. v2->v3: - Added one empty line after function declaration. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rohit Maheshwari authored
A new macro is defined to enable ktls tx offload support on Chelsio T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to enable or disable ktls settings on HW. In chcr, enabled tx offload flag in netdev and registered tls_dev_add and tls_dev_del. v1->v2: - mark tcb state to close in tls_dev_del. - u_ctx is now picked from adapter structure. - clear atid in case of failure. - corrected ULP_CRYPTO_KTLS_INLINE value. v2->v3: - add empty line after variable declaration. - local variable declaration in reverse christmas tree ordering. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== net: allow user specify TC action HW stats type Currently, when user adds a TC action and the action gets offloaded, the user expects the HW stats to be counted and included in stats dump. However, since drivers may implement different types of counting, there is no way to specify which one the user is interested in. For example for mlx5, only delayed counters are available as the driver periodically polls for updated stats. In case of mlxsw, the counters are queried on dump time. However, the HW resources for this type of counters is quite limited (couple of thousands). This limits the amount of supported offloaded filters significantly. Without counter assigned, the HW is capable to carry millions of those. On top of that, mlxsw HW is able to support delayed counters as well in greater numbers. That is going to be added in a follow-up patch. This patchset allows user to specify one of the following types of HW stats for added action: immediate - queried during dump time delayed - polled from HW periodically or sent by HW in async manner disabled - no stats needed Note that if "hw_stats" option is not passed, user does not care about the type, just expects any type of stats. Examples: $ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled $ tc -s filter show dev enp0s16np28 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 skip_sw in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 7 sec used 2 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 hw_stats disabled $ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate $ tc -s filter show dev enp0s16np28 ingress filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 192.168.1.1 skip_sw in_hw in_hw_count 2 action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 11 sec used 4 sec Action statistics: Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0) Sent software 0 bytes 0 pkt Sent hardware 102 bytes 1 pkt backlog 0b 0p requeues 0 hw_stats immediate ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently, user who is adding an action expects HW to report stats, however it does not have exact expectations about the stats types. That is aligned with TCA_ACT_HW_STATS_TYPE_ANY. Allow user to specify the type of HW stats for an action and require it. Pass the information down to flow_offload layer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce new type for disabled HW stats and allow the value in mlxsw offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Set a flag in case rule counter was created. Only query the device for stats of a rule, which has the valid counter assigned. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce new type for delayed HW stats and allow the value in mlx5 offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce new type for immediate HW stats and allow the value in mlxsw offload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Currently don't allow actions with any other type to be inserted. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
As there is one set of counters for the whole action chain, forbid to mix the HW stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce flow_action_basic_hw_stats_types_check() helper and use it in drivers. That sanitizes the drivers which do not have support for action HW stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Instead of directly checking number of action entries, use flow_offload_has_one_action() helper. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Initially, pass "ANY" (struct is zeroed) to the drivers as that is the current implicit value coming down to flow_offload. Add a bool indicating that entries have mixed HW stats type. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Mar, 2020 10 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - other drivers Convert more drivers following the groundwork laid in a recent patch set [1]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts all the drivers outside of drivers/net/ethernet. Only vmxnet3 them was checking unsupported parameters. The aim is to merge this via the net-next tree so we can convert all drivers and make the checking mandatory. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver correctly rejects all unsupported parameters. As a side effect of these changes the error code for unsupported params changes from EINVAL to EOPNOTSUPP. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ansuel Smith authored
Add documentations for ipq806x mdio driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ansuel Smith authored
Currently ipq806x soc use generic bitbang driver to comunicate with the gmac ethernet interface. Add a dedicated driver created by chunkeey to fix this. Co-developed-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Mar, 2020 15 commits
-
-
David S. Miller authored
Michal Kubecek says: ==================== tun: debug messages cleanup While testing ethtool output for "strange" devices, I noticed confusing and obviously incorrect message level information for a tun device and sent a quick fix. The result of the upstream discussion was that tun driver would rather deserve a more complex cleanup of the way it handles debug messages. The main problem is that all debugging statements and setting of message level are controlled by TUN_DEBUG macro which is only defined if one edits the source and rebuilds the module, otherwise all DBG1() and tun_debug() statements do nothing. This series drops the TUN_DEBUG switch and replaces custom tun_debug() macro with standard netif_info() so that message level (mask) set and displayed using ethtool works as expected. Some debugging messages are dropped as they only notify about entering a function which can be done easily using ftrace or kprobe. Patch 1 is a trivial fix for compilation warning with W=1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
TUN_DEBUG and tun_debug() are no longer used anywhere, drop them. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
The tun driver uses custom macro tun_debug() which is only available if TUN_DEBUG is set. Replace it by standard netif_ifinfo(). For that purpose, rename tun_struct::debug to msg_enable and make it u32 and always present. Finally, make tun_get_msglevel(), tun_set_msglevel() and TUNSETDEBUG ioctl independent of TUN_DEBUG. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
Some of the tun_debug() statements only inform us about entering a function which can be easily achieved with ftrace or kprobe. As tun_debug() is no-op unless TUN_DEBUG is set which requires editing the source and recompiling, setting up ftrace or kprobe is easier. Drop these debug statements. Also drop the tun_debug() statement informing about SIOCSIFHWADDR ioctl. We can monitor these through rtnetlink and it makes little sense to log address changes through ioctl but not changes through rtnetlink. Moreover, this tun_debug() is called even if the actual address change fails which makes it even less useful. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
This macro is no-op unless TUN_DEBUG is defined (which requires editing and recompiling the source) and only does something if variable debug is 2 but that variable is zero initialized and never set to anything else. Moreover, the only use of the macro informs about entering function tun_chr_open() which can be easily achieved using ftrace or kprobe. Drop DBG1() macro, its only use and global variable debug. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
The comment above tun_flow_save_rps_rxhash() starts with "/**" which makes it look like kerneldoc comment and results in warnings when building with W=1. Fix the format to make it look like a normal comment. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jacob Keller says: ==================== PCI: Implement function to read Device Serial Number Several drivers read the Device Serial Number from the PCIe extended configuration space. Each of these drivers implements a similar approach to finding the position and then extracting the 8 bytes of data. Implement a new helper function, pci_get_dsn, which can be used to extract this data into an 8 byte array. Modify the bnxt_en, qedf, ice, ixgbe and nfp drivers to use this new function. The intent for this is to reduce duplicate code across the various drivers, and make it easier to write future code that wants to read the DSN. In particular the ice driver will be using the DSN as its serial number when implementing the DEVLINK_CMD_INFO_GET. The new implementation in v2 significantly simplifies some of the callers which just want to print the value out in MSB order. By returning things as a u64 in CPU Endian order, the "%016llX" printf format specifier can be used to correctly format the value. Per patch changes since v1 PCI: Introduce pci_get_dsn * Update commit message based on feedback from Bjorn Helgaas * Modify the function to return a u64 (zero on no capability) * This new implementation ensures that the first dword is the lower 32 bits and the second dword is the upper 32 bits. bnxt_en: Use pci_get_dsn() * Use the u64 return value from pci_get_dsn() * Copy it into the dsn[] array by using put_unaligned_le64 * Fix a pre-existing typo in the netdev_info error message scsi: qedf: Use pci_get_dsn() * Use the u64 return value from pci_get_dsn() * simplify the snprintf to use "%016llX" * remove the unused 'i' variable ice: Use pci_get_dsn() * Use the u64 return value from pci_get_dsn() * simplify the snprintf to use "%016llX" ixgbe: Use pci_get_dsn() * Use the u64 return value from pci_get_dsn() * simplify the snprintf to use "%016llX" nfp: Use pci_get_dsn() * Added in v2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Use the newly added pci_get_dsn() function for obtaining the 64-bit Device Serial Number in the nfp6000_read_serial and nfp_6000_get_interface functions. pci_get_dsn() reports the Device Serial number as a u64 value created by combining two pci_read_config_dword functions. The lower 16 bits represent the device interface value, and the next 48 bits represent the serial value. Use put_unaligned_be32 and put_unaligned_be16 to convert the serial value portion into a Big Endian formatted serial u8 array. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Replace the open-coded implementation for reading the PCIe DSN with pci_get_dsn(). The original code used a simple for-loop to read the bytes in order into a buffer one byte at a time. The pci_get_dsn() function returns the DSN as a u64, correctly ordering the upper and lower 32 bit dwords. Simplify the display code by using %016llX to display the u64 DSN. This should have equivalent behavior on both Little and Big Endian systems. The bus will have correctly ordered the dwords in the CPU endian format, while pci_get_dsn() will correctly order the lower and higher dwords into a u64. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Replace the open-coded implementation for reading the PCIe DSN with pci_get_dsn(). The pci_get_dsn() function will perform two pci_read_config_dword calls to read the lower and upper config dwords. It bitwise ORs them into a u64 value. Instead of using put_unaligned_le32 to convert the value to LE32 format, just use the %016llX printf specifier. This will print the u64 correct, putting the most significant byte of the value first. Since pci_get_dsn() correctly orders the two dwords into a u64, this should produce equivalent results in less code. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Replace the open-coded implementation for reading the PCIe DSN with pci_get_dsn(). The original code used a for-loop that looped over each of the 8 bytes and copied them into a temporary buffer. pci_get_dsn() uses two calls to pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus, we can simplify the snprintf significantly using %016llX on a u64 value. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Replace the open-coded implementation for reading the PCIe DSN with pci_get_dsn(). Use of put_unaligned_le64 should be correct. pci_get_dsn() will perform two pci_read_config_dword calls. The first dword will be placed in the first 32 bits of the u64, while the second dword will be placed in the upper 32 bits of the u64. On Little Endian systems, the least significant byte comes first, which will be the least significant byte of the first dword, followed by the least significant byte of the second dword. Since the _le32 variations do not perform byte swapping, we will correctly copy the dwords into the dsn[] array in the same order as before. On Big Endian systems, the most significant byte of the second dword will come first. put_unaligned_le64 will perform a CPU_TO_LE64, which will swap things correctly before copying. This should also end up with the correct bytes in the dsn[] array. While at it, fix a small typo in the netdev_info error message when the DSN cannot be read. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Several device drivers read their Device Serial Number from the PCIe extended config space. Introduce a new helper function, pci_get_dsn(). This function reads the eight bytes of the DSN and returns them as a u64. If the capability does not exist for the device, the function returns 0. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Michael Chan <michael.chan@broadcom.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-