- 18 Nov, 2021 5 commits
-
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: b2f74ec5 ("ASoC: tegra: Add Tegra210 based SFC driver") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-6-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: 327ef647 ("ASoC: tegra: Add Tegra186 based DSPK driver") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-5-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-4-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: c0bfa983 ("ASoC: tegra: Add Tegra210 based I2S driver") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-3-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Sameer Pujar authored
The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: f74028e1 ("ASoC: tegra: Add Tegra210 based ADMAIF driver") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-2-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 17 Nov, 2021 1 commit
-
-
Olivier Moysan authored
Fix divider calculation in the case of 32 bits channel configuration, when no master clock is used. Fixes: e4e6ec7b ("ASoC: stm32: Add I2S driver") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20211117104404.3832-1-olivier.moysan@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 16 Nov, 2021 9 commits
-
-
Srinivas Kandagatla authored
For some reason we ended up using snd_soc_component_write_field for HPHL and snd_soc_component_update_bits for HPHR, so fix this. Fixes: af3d54b9 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-4-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Error returned from wcd934x_slim_set_hw_params() are not passed to upper layer, this could be misleading to the user which can start sending stream leading to unnecessary errors. Fix this by properly returning the errors. Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Interrupt Clear registers WCD938X_INTR_CLEAR_0 - WCD938X_INTR_CLEAR_2 are not marked as volatile. This has resulted in a missing interrupt bug while performing runtime pm. regcache_sync() during runtime pm resume path will write to Interrupt clear registers with previous values which basically clears the pending interrupt and actual interrupt handler never sees this interrupt. This issue is more visible with headset plug-in plug-out case compared to headset button. Fix this by adding the Interrupt clear registers to volatile range Fixes: 8d78602a ("ASoC: codecs: wcd938x: add basic driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114623.11891-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 8a978234 ("ASoC: topology: Add topology core") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211116071812.18109-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Validate port id before it starts sending commands to dsp this would make error handling simpler. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-6-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
reset value for port is -1 so printing an hex would not give us very useful debug information, so use %d instead. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-5-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Error handling in q6asm_dai_prepare() seems to be completely broken, Fix this by handling it properly. Fixes: 2a9e92d3 ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-4-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd. Ex: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream. amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0 reset the FrontEnd Mixers conditionally to fix this issue. This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings. Fixes: e3a33673 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
Q6PRM clks need to be disabled using PRM_CMD_RELEASE_HW_RSC dsp command rather then using PRM_CMD_RSP_REQUEST_HW_RSC cmd with rate set to zero. DSP will throw errors if we try to disable the clock using existing code. Fix this by properly handling the clk release. Fixes: 9a0e5d6f ("ASoC: qdsp6: audioreach: add q6prm support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211116114721.12517-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Nov, 2021 2 commits
-
-
Simon Trimmer authored
This patch fixes the static analysis warning as it is correctly indicating a possible code path, it cannot know that for the affected firmware versions subname would always be NULL. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211115120154.56782-1-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Changes from ChiYuan Huang <cy_huang@richtek.com> to fix a couple of bugs and add a new device ID/quirk for the rt9120s to the driver.
-
- 12 Nov, 2021 9 commits
-
-
Kuninori Morimoto authored
commit d5bb69dc ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") updated DMAEngine API _all() to _sync(), but it should be _async(). _all() and _async() are almost same, the difference is only return error code. _sync() will call dmaengine_synchronize() and will be kernel panic. This patch is needed for v5.15 or later. [ 27.293264] BUG: scheduling while atomic: irq/130-ec70000/131/0x00000003 [ 27.300084] 2 locks held by irq/130-ec70000/131: [ 27.304743] #0: ffff0004c274d908 (&group->lock){....}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x48/0x54 [ 27.314344] #1: ffff0004c1788c60 (&priv->lock#2){....}-{2:2}, at: rsnd_soc_dai_trigger+0x70/0x7bc [ 27.323409] irq event stamp: 206 [ 27.326664] hardirqs last enabled at (205): [<ffff80001082de50>] _raw_spin_unlock_irq+0x50/0xa0 [ 27.335529] hardirqs last disabled at (206): [<ffff80001082d9e4>] _raw_spin_lock_irqsave+0xc4/0xd0 [ 27.344564] softirqs last enabled at (0): [<ffff800010037324>] copy_process+0x644/0x1b10 [ 27.352819] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 27.359142] CPU: 0 PID: 131 Comm: irq/130-ec70000 Not tainted 5.14.0-rc1+ #918 [ 27.366429] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77950 (DT) [ 27.373975] Call trace: [ 27.376442] dump_backtrace+0x0/0x1b4 [ 27.380141] show_stack+0x24/0x30 [ 27.383488] dump_stack_lvl+0x8c/0xb8 [ 27.387184] dump_stack+0x18/0x34 [ 27.390528] __schedule_bug+0x8c/0x9c [ 27.394224] __schedule+0x790/0x8dc [ 27.397746] schedule+0x7c/0x110 [ 27.401003] synchronize_irq+0x94/0xd0 [ 27.404786] rcar_dmac_device_synchronize+0x20/0x2c [ 27.409710] rsnd_dmaen_stop+0x50/0x64 [ 27.413495] rsnd_soc_dai_trigger+0x554/0x7bc [ 27.417890] snd_soc_pcm_dai_trigger+0xe8/0x264 Cc: <stable@kernel.org> Fixes: commit d5bb69dc ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") Link: https://lore.kernel.org/r/TY2PR01MB3692889E1A7476C4322CC296D8AE9@TY2PR01MB3692.jpnprd01.prod.outlook.comReported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mtmfz36o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
With CONFIG_SND_SOC_SOF_COMPRESS=m, the compression code is not built into a the main SOF driver when that is built-in: x86_64-linux-ld: sound/soc/sof/ipc.o: in function `ipc_stream_message': ipc.c:(.text+0x5a2): undefined reference to `snd_sof_compr_fragment_elapsed' x86_64-linux-ld: sound/soc/sof/topology.o: in function `sof_dai_load': topology.c:(.text+0x32d1): undefined reference to `snd_sof_compr_init_elapsed_work' x86_64-linux-ld: topology.c:(.text+0x32e1): undefined reference to `snd_sof_compr_init_elapsed_work' Make this a 'bool' symbol so it just decides whether the code gets built at all. Fixes: 858f7a5c ("ASoC: SOF: Introduce fragment elapsed notification API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20211108111132.3800548-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
AngeloGioacchino Del Regno authored
When registering the mt8173-afe-pcm driver, we are also adding two components: one is for the PCM DAIs and one is for the HDMI DAIs, but when debugfs is enabled, we're getting the following issue: [ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present! [ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present! To overcome to that without any potentially big rewrite of this driver, similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to the components before actually adding them. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Derek Fang authored
Sometimes, end-users change the jack type under suspending, so it needs to re-detect the combo jack type after resuming to avoid any unexpected behaviors. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Derek Fang authored
When the system suspends, the codec driver will set SAR to power saving mode if a headset is plugged in. There is a chance to generate an unexpected IRQ, and leads to issues after resuming such as noise from OMTP type headsets. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211109095450.12950-1-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Jack Yu authored
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific for some platforms, the default setting for 'I2S Reference' does nothing, only some SoC platform need to configure it. Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of RT1011_TDM1_SET_1 register, which isn't enough for specific platform. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20211111091705.20879-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
Use device id reg to be compatible with rt9120 and rt9120s. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1636515921-31694-4-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
If fs is divided by 48, to make audio clock sync rate correct, internal sync function have be disabled. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1636515921-31694-3-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
Update internal ocp level to correct value. Even the wrong ocp setting can also make the sound output, but the power cannot match the IC capability. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1636515921-31694-2-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Nov, 2021 12 commits
-
-
Gongjun Song authored
This product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-10-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
Product audio hardware configuration is rt711 on link2, two rt1316s on link0 and link1, rt714 on link 3. Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-9-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
This product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-8-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
Product audio hardware configuration is rt1316 on link2, rt714 on link 3. Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-7-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
This product supports SoundWire capture from local microphones and one SoundWire amplifier(no headset codec). Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-6-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
This product supports a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-5-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
Both products support a SoundWire headset codec, SoundWire capture from local microphones and two SoundWire amplifiers. Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-4-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
New product audio hardware configuration is rt714 on link0, two rt1316s on link1 and link2 Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-3-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Gongjun Song authored
This product supports SoundWire capture from local microphones and two SoundWire amplifiers(no headset codec). Signed-off-by: Gongjun Song <gongjun.song@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211105022646.26305-2-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
AngeloGioacchino Del Regno authored
Some RT5645 and RT5650 powered platforms are using "Ext Spk" instead of "Speaker", and this is also reflected in alsa-lib configurations for the generic RT5645 usecase manager configs. Rename the "Speaker" control to "Ext Spk" in order to be able to make the userspace reuse/inherit the same configurations also for this machine, along with the others. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211105152013.75252-1-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
The recent fix for DAPM to correct the kctl change notification by the commit 5af82c81 ("ASoC: DAPM: Fix missing kctl change notifications") caused other regressions since it changed the behavior of snd_soc_dapm_set_pin() that is called from several API functions. Formerly it returned always 0 for success, but now it returns 0 or 1. This patch addresses it, restoring the old behavior of snd_soc_dapm_set_pin() while keeping the fix in snd_soc_dapm_put_pin_switch(). Fixes: 5af82c81 ("ASoC: DAPM: Fix missing kctl change notifications") Reported-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kai Vehmanen authored
If codec is in runtime suspend, but controller is not, hotplug events are missed as the codec has no way to alert the controller. Problem does not occur if both controller and codec are active, or when both are suspended. An easy way to reproduce is to play an audio stream on one codec (e.g. to HDMI/DP display codec), wait for other HDA codec to go to runtime suspend, and then plug in a headset to the suspended codec. The jack event is not reported correctly in this case. Another way to reproduce is to force controller to stay active with "snd_sof_pci.sof_pci_debug=0x1" Fix the issue by reconfiguring the WAKEEN register when powering up/down individual links, and handling control events in the interrupt handler. Fixes: 87fc20e4 ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management") Reported-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211105111655.668777-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Nov, 2021 1 commit
-
-
Peter Ujfalusi authored
The second parameter for snd_sof_ipc_set_get_comp_data() is ipc_cmd, not ipc_ctrl_type and the type is u32. Fixes: 756bbe42 ("ASoC: SOF: Handle control change notification from firmware") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20211103082710.17165-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Nov, 2021 1 commit
-
-
Charles Keepax authored
Currently the internal monitor sources are input widgets, which means if the card is set to fully routed these will not enable unless connected to something in the machine driver. However, all these are internal monitor signals so it makes no sense to connect them to something in the machine driver. As such switch them to siggen widgets which will have the same behaviour except not require external linkage on a fully routed card. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211029214028.401284-1-drhodes@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>
-