We want to ceph_con_close when we're done with the connection, before
the ref count reaches 0.  Once it does, do not call ceph_con_shutdown,
as that takes the con mutex and may sleep, and besides that is
unnecessary.
Signed-off-by: Sage Weil <sage@newdream.net>

We occasionally want to make a best-effort attempt to invalidate cache
pages without fear of blocking.  If this fails, we fall back to an async
invalidate in another thread.

Use invalidate_mapping_pages instead of invalidate_inode_page2, as that
will skip locked pages, and not deadlock.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

This helps the user know what's going on during the (involved) reconnect
process.  They already see when the mds fails and reconnect starts.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

It was hidden from sync readdir, but not the cached dcache version.
Signed-off-by: Sage Weil <sage@newdream.net>

We don't get an explicit affirmative confirmation that our caps reconnect,
nor do we necessarily want to pay that cost.  So, take all this code out
for now.
Signed-off-by: Sage Weil <sage@newdream.net>

We need to make sure we only swab the address during the banner once.  So
break process_banner out of process_connect, and clean up the surrounding
code so that these are distinct phases of the handshake.
Signed-off-by: Sage Weil <sage@newdream.net>

We were using the cap_gen to track both stale caps (caps that timed out
due to temporarily losing touch with the mds) and dead caps that did not
reconnect after an MDS failure.  Introduce a recon_gen counter to track
reconnections to restarted MDSs and kill dead caps based on that instead.

Rename gen to cap_gen while we're at it to make it more clear which is
which.
Signed-off-by: Sage Weil <sage@newdream.net>

Make the integer hash function a property of the bucket it is used on.  This
allows us to gracefully add support for new hash functions without starting
from scatch.
Signed-off-by: Sage Weil <sage@newdream.net>

The object will be hashed to a placement seed (ps) based on the pg_pool's
hash function.  This allows new hashes to be introduced into an existing
object store, or selection of a hash appropriate to the objects that
will be stored in a particular pool.
Signed-off-by: Sage Weil <sage@newdream.net>

We were using the (weak) dcache hash function, but it was leaving lower
bits consecutive for consecutive (inode) objects.  We really want to make
the object to pg mapping random and uniform, so use a proper hash function
here.

This is Robert Jenkin's public domain hash function (with some minor
cleanup):
	http://burtleburtle.net/bob/hash/evahash.html

This is a protocol revision.
Signed-off-by: Sage Weil <sage@newdream.net>

These are way to big to be inline.  I missed crush/* when doing the inline
audit for akpm's review.
Signed-off-by: Sage Weil <sage@newdream.net>

No ceph prefix.
Signed-off-by: Sage Weil <sage@newdream.net>

The port is informational only, but we should make it correct.
Signed-off-by: Sage Weil <sage@newdream.net>

Use the __le macro, even though for -1 it doesn't matter.
Signed-off-by: Sage Weil <sage@newdream.net>

The endian conversions don't quite work with the old union ceph_pg.  Just
make it a regular struct, and make each field __le.  This is simpler and it
has the added bonus of actually working.
Signed-off-by: Sage Weil <sage@newdream.net>

We exchange struct ceph_entity_addr over the wire and store it on disk.
The sockaddr_storage.ss_family field, however, is host endianness.  So,
fix ss_family endianness to big endian when sending/receiving over the
wire.
Signed-off-by: Sage Weil <sage@newdream.net>

This keeps bdi setup/teardown in line with client life cycle.
Signed-off-by: Sage Weil <sage@newdream.net>

Even when we encounter a corrupt bucket.  We still BUG().  This fixes
the warning

fs/ceph/crush/mapper.c: In function 'crush_choose':
fs/ceph/crush/mapper.c:352: warning: control may reach end of non-void function
'crush_bucket_choose' being inlined
Signed-off-by: Sage Weil <sage@newdream.net>

Fixes warning
fs/ceph/xattr.c: In function '__build_xattrs':
fs/ceph/xattr.c:353: warning: 'err' may be used uninitialized in this function
Signed-off-by: Sage Weil <sage@newdream.net>

Commit 645a1025 fixes calculation of object
offset for layouts with multiple stripes per object. This updates the
calculation of the length written to take into account multiple stripes per
object.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>

We were incorrectly calculationing of object offset.  If we have multiple
stripe units per object, we need to shift to the start of the current
su in addition to the offset within the su.

Also rename bno to ono (object number) to avoid some variable naming
confusion.
Signed-off-by: Sage Weil <sage@newdream.net>

The object extent offset is the file offset _modulo_ the stripe unit.
The code was correct, the comment was wrong.
Reported-by: Noah Watkins <jayhawk@soe.ucsc.edu>
Signed-off-by: Sage Weil <sage@newdream.net>

Using stripe unit size calculated and saved on the stack to avoid
a redundant call to le32_to_cpu.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>

Usage of non-list.h list_entry function for container_of
functionality replaced with direct use of container_of.
Signed-off-by: Noah Watkins <noah@noahdesu.com>
Signed-off-by: Sage Weil <sage@newdream.net>

This simplifies much of the error handling during mount.  It also means
that we have the mount args before client creation, and we can initialize
based on those options.
Signed-off-by: Sage Weil <sage@newdream.net>

Clearly demark int and string argument options, and do not try to convert
string arguments to ints.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Since we've increased the max mon count, we shouldn't put the addr array
on the parse_mount_args stack.  Put it on the heap instead.
Signed-off-by: Sage Weil <sage@newdream.net>

Get rid of separate max mon limit; use the system limit instead.  This
allows mounts when there are lots of mon addrs provided by mount.ceph (as
with a host with lots of A/AAAA records).
Signed-off-by: Sage Weil <sage@newdream.net>

We can't fill i_size with rbytes at the fill_file_size stage without
adding additional checks for directories.  Notably, we want st_blocks
to remain 0 on directories so that 'du' still works.

Fill in i_blocks, i_size specially in ceph_getattr instead.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Mix the preferred osd (if any) into the placement seed that is fed into
the CRUSH object placement calculation.  This prevents all the placement
pgs from peering with the same osds.

Rev the osd client protocol with this change.
Signed-off-by: Sage Weil <sage@newdream.net>

Initialized bdi->ra_pages to enable readahead.  Use 512KB default.
Signed-off-by: Sage Weil <sage@newdream.net>

Cleanup only.
Signed-off-by: Sage Weil <sage@newdream.net>

Pass the front_len we need when pulling a message off a msgpool,
and WARN if it is greater than the pool's size.  Then try to
allocate a new message (to continue without failing).
Signed-off-by: Sage Weil <sage@newdream.net>

Defined a struct for the SUBSCRIBE_ACK, and use that to size
the msgpool.
Signed-off-by: Sage Weil <sage@newdream.net>

Previously we were flushing dirty caps by passing an extra flag
when traversing the delayed caps list.  Besides being a bit ugly,
that can also miss caps that are dirty but didn't result in a
cap requeue: notably, mark_caps_dirty().

Separate the flushing into a separate helper, and traverse the
cap_dirty list.

This also brings i_dirty_item in line with i_dirty_caps: we are
on the list IFF caps != 0.  We carry an inode ref IFF
dirty_caps|flushing_caps != 0.

Lose the unused return value from __ceph_mark_caps_dirty().
Signed-off-by: Sage Weil <sage@newdream.net>

Both callers of __mark_caps_flushing() do the same work; move it
into the helper.
Signed-off-by: Sage Weil <sage@newdream.net>