- 31 May, 2019 6 commits
-
-
Suthikulpanit, Suravee authored
commit c9bcd3e3 upstream. Current logic does not allow VCPU to be loaded onto CPU with APIC ID 255. This should be allowed since the host physical APIC ID field in the AVIC Physical APIC table entry is an 8-bit value, and APIC ID 255 is valid in system with x2APIC enabled. Instead, do not allow VCPU load if the host APIC ID cannot be represented by an 8-bit value. Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK instead of AVIC_MAX_PHYSICAL_ID_COUNT. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Axtens authored
commit 009b30ac upstream. The kernel self-tests picked up an issue with CTR mode: alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep" Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so after 3 increments it should wrap around to 0. In the aesp8-ppc code from OpenSSL, there are two paths that increment IVs: the bulk (8 at a time) path, and the individual path which is used when there are fewer than 8 AES blocks to process. In the bulk path, the IV is incremented with vadduqm: "Vector Add Unsigned Quadword Modulo", which does 128-bit addition. In the individual path, however, the IV is incremented with vadduwm: "Vector Add Unsigned Word Modulo", which instead does 4 32-bit additions. Thus the IV would instead become FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result. Use vadduqm. This was probably a typo originally, what with q and w being adjacent. It is a pretty narrow edge case: I am really impressed by the quality of the kernel self-tests! Fixes: 5c380d62 ("crypto: vmx - Add support for VMS instructions by ASM") Cc: stable@vger.kernel.org Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Martin K. Petersen authored
commit 8acf608e upstream. This reverts commit 20bd1d02. This patch introduced regressions for devices that come online in read-only state and subsequently switch to read-write. Given how the partition code is currently implemented it is not possible to persist the read-only flag across a device revalidate call. This may need to get addressed in the future since it is common for user applications to proactively call BLKRRPART. Reverting this commit will re-introduce a regression where a device-initiated revalidate event will cause the admin state to be forgotten. A separate patch will address this issue. Fixes: 20bd1d02 ("scsi: sd: Keep disk read-only when re-reading partition") Cc: <stable@vger.kernel.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Andrea Parri authored
commit f381c6a4 upstream. This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic_set() primitive. Replace the barrier with an smp_mb(). Fixes: dac56212 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases") Cc: stable@vger.kernel.org Reported-by:
"Paul E. McKenney" <paulmck@linux.ibm.com> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: linux-block@vger.kernel.org Cc: "Paul E. McKenney" <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Paolo Bonzini authored
commit 66f61c92 upstream. Commit 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes", 2019-04-02) introduced a "return false" in a function returning int, and anyway set_efer has a "nonzero on error" conventon so it should be returning 1. Reported-by:
Pavel Machek <pavel@denx.de> Fixes: 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes") Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Kara authored
commit ee0ed02c upstream. It is possible that unlinked inode enters ext4_setattr() (e.g. if somebody calls ftruncate(2) on unlinked but still open file). In such case we should not delete the inode from the orphan list if truncate fails. Note that this is mostly a theoretical concern as filesystem is corrupted if we reach this path anyway but let's be consistent in our orphan handling. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
- 25 May, 2019 34 commits
-
-
Greg Kroah-Hartman authored
-
Yifeng Li authored
commit 9dc20113 upstream. A fallthrough in switch/case was introduced in f627caf5 ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting"), due to my copy-paste error, which would cause the memory clock frequency for SM720 to be programmed to SM712. Since it only reprograms the clock to a different frequency, it's only a benign issue without visible side-effect, so it also evaded Sudip Mukherjee's code review and regression tests. scripts/checkpatch.pl also failed to discover the issue, possibly due to nested switch statements. This issue was found by Stephen Rothwell by building linux-next with -Wimplicit-fallthrough. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f627caf5 ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting") Signed-off-by:
Yifeng Li <tomli@tomli.me> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Nikolay Borisov authored
commit c2d1b3aa upstream. Up until now trimming the freespace was done irrespective of what the arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments will be entirely ignored. Fix it by correctly handling those paramter. This requires breaking if the found freespace extent is after the end of the passed range as well as completing trim after trimming fstrim_range::len bytes. Fixes: 499f377f ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Nigel Croxon authored
commit b2176a1d upstream. The problem is that any 'uptodate' vs 'disks' check is not precise in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the device that might try to kick off writes and then skip the action. Better to prevent the raid driver from taking unexpected action *and* keep the system alive vs killing the machine with BUG_ON. Note: fixed warning reported by kbuild test robot <lkp@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Nigel Croxon <ncroxon@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Song Liu authored
commit a25d8c32 upstream. This reverts commit 4f4fd7c5. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Nigel Croxon <ncroxon@redhat.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit bf561d3c ] While cross building perf to the ARC architecture on a fedora 30 host, we were failing with: CC /tmp/build/perf/bench/numa.o bench/numa.c: In function ‘worker_thread’: bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’? getrusage(RUSAGE_THREAD, &rusage); ^~~~~~~~~~~~~ SIGEV_THREAD bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in [perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1 arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225 [perfbuilder@60d5802468f6 perf]$ Trying to reproduce a report by Vineet, I noticed that, with just cross-built zlib and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define, check for that and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define in the system headers, check if it is defined in the 'perf bench numa' sources and define it if not. Now it builds and I have to figure out if the problem reported by Vineet only takes place if we have libelf or some other library available. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Al Viro authored
[ Upstream commit 4e903604 ] To choose whether to pick the GID from the old (16bit) or new (32bit) field, we should check if the old gid field is set to 0xffff. Mainline checks the old *UID* field instead - cut'n'paste from the corresponding code in ufs_get_inode_uid(). Fixes: 252e211eSigned-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andrey Smirnov authored
[ Upstream commit 349ced99 ] Fix a similar endless event loop as was done in commit 8dcf3217 ("i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE"): The culprit is the dev_dbg printk in the i2c uevent handler. If this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results in an endless loop with systemd-journald. This happens if user-space scans the system log and reads the uevent file to get information about a newly created device, which seems fair use to me. Unfortunately reading the "uevent" file uses the same function that runs for creating the uevent for a new device, generating the next syslog entry Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former seems to have been fixed. Drop debug prints as it was done in I2C subsystem to resolve the issue. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-pm@vger.kernel.org Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Andrew Jones authored
[ Upstream commit 811328fc ] A failed KVM_ARM_VCPU_INIT should not set the vcpu target, as the vcpu target is used by kvm_vcpu_initialized() to determine if other vcpu ioctls may proceed. We need to set the target before calling kvm_reset_vcpu(), but if that call fails, we should then unset it and clear the feature bitmap while we're at it. Signed-off-by:
Andrew Jones <drjones@redhat.com> [maz: Simplified patch, completed commit message] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Bhagavathi Perumal S authored
[ Upstream commit f1267cf3 ] The txq of vif is added to active_txqs list for ATF TXQ scheduling in the function ieee80211_queue_skb(), but it was not properly removed before freeing the txq object. It was causing use after free of the txq objects from the active_txqs list, result was kernel panic due to invalid memory access. Fix kernel invalid memory access by properly removing txq object from active_txqs list before free the object. Signed-off-by:
Bhagavathi Perumal S <bperumal@codeaurora.org> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 8742dc86 ] We currently don't reload pointers pointing into skb header after doing pskb_may_pull() in _decode_session4(). So in case pskb_may_pull() changed the pointers, we read from random memory. Fix this by putting all the needed infos on the stack, so that we don't need to access the header pointers after doing pskb_may_pull(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Jeremy Sowden authored
[ Upstream commit 5483844c ] If tunnel registration failed during module initialization, the module would fail to deregister the IPPROTO_COMP protocol and would attempt to deregister the tunnel. The tunnel was not deregistered during module-exit. Fixes: dd9ee344 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Su Yanjun authored
[ Upstream commit 6ee02a54 ] When unloading xfrm6_tunnel module, xfrm6_tunnel_fini directly frees the xfrm6_tunnel_spi_kmem. Maybe someone has gotten the xfrm6_tunnel_spi, so need to wait it. Fixes: 91cc3bb0("xfrm6_tunnel: RCU conversion") Signed-off-by:
Su Yanjun <suyj.fnst@cn.fujitsu.com> Acked-by:
-
YueHaibing authored
[ Upstream commit b805d78d ] UBSAN report this: UBSAN: Undefined behaviour in net/xfrm/xfrm_policy.c:1289:24 index 6 is out of range for type 'unsigned int [6]' CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.162-514.55.6.9.x86_64+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 0000000000000000 1466cf39b41b23c9 ffff8801f6b07a58 ffffffff81cb35f4 0000000041b58ab3 ffffffff83230f9c ffffffff81cb34e0 ffff8801f6b07a80 ffff8801f6b07a20 1466cf39b41b23c9 ffffffff851706e0 ffff8801f6b07ae8 Call Trace: <IRQ> [<ffffffff81cb35f4>] __dump_stack lib/dump_stack.c:15 [inline] <IRQ> [<ffffffff81cb35f4>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51 [<ffffffff81d94225>] ubsan_epilogue+0x12/0x8f lib/ubsan.c:164 [<ffffffff81d954db>] __ubsan_handle_out_of_bounds+0x16e/0x1b2 lib/ubsan.c:382 [<ffffffff82a25acd>] __xfrm_policy_unlink+0x3dd/0x5b0 net/xfrm/xfrm_policy.c:1289 [<ffffffff82a2e572>] xfrm_policy_delete+0x52/0xb0 net/xfrm/xfrm_policy.c:1309 [<ffffffff82a3319b>] xfrm_policy_timer+0x30b/0x590 net/xfrm/xfrm_policy.c:243 [<ffffffff813d3927>] call_timer_fn+0x237/0x990 kernel/time/timer.c:1144 [<ffffffff813d8e7e>] __run_timers kernel/time/timer.c:1218 [inline] [<ffffffff813d8e7e>] run_timer_softirq+0x6ce/0xb80 kernel/time/timer.c:1401 [<ffffffff8120d6f9>] __do_softirq+0x299/0xe10 kernel/softirq.c:273 [<ffffffff8120e676>] invoke_softirq kernel/softirq.c:350 [inline] [<ffffffff8120e676>] irq_exit+0x216/0x2c0 kernel/softirq.c:391 [<ffffffff82c5edab>] exiting_irq arch/x86/include/asm/apic.h:652 [inline] [<ffffffff82c5edab>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926 [<ffffffff82c5c985>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:735 <EOI> [<ffffffff81188096>] ? native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:52 [<ffffffff810834d7>] arch_safe_halt arch/x86/include/asm/paravirt.h:111 [inline] [<ffffffff810834d7>] default_idle+0x27/0x430 arch/x86/kernel/process.c:446 [<ffffffff81085f05>] arch_cpu_idle+0x15/0x20 arch/x86/kernel/process.c:437 [<ffffffff8132abc3>] default_idle_call+0x53/0x90 kernel/sched/idle.c:92 [<ffffffff8132b32d>] cpuidle_idle_call kernel/sched/idle.c:156 [inline] [<ffffffff8132b32d>] cpu_idle_loop kernel/sched/idle.c:251 [inline] [<ffffffff8132b32d>] cpu_startup_entry+0x60d/0x9a0 kernel/sched/idle.c:299 [<ffffffff8113e119>] start_secondary+0x3c9/0x560 arch/x86/kernel/smpboot.c:245 The issue is triggered as this: xfrm_add_policy -->verify_newpolicy_info //check the index provided by user with XFRM_POLICY_MAX //In my case, the index is 0x6E6BB6, so it pass the check. -->xfrm_policy_construct //copy the user's policy and set xfrm_policy_timer -->xfrm_policy_insert --> __xfrm_policy_link //use the orgin dir, in my case is 2 --> xfrm_gen_index //generate policy index, there is 0x6E6BB6 then xfrm_policy_timer be fired xfrm_policy_timer --> xfrm_policy_id2dir //get dir from (policy index & 7), in my case is 6 --> xfrm_policy_delete --> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is valid, to fix the issue. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: e682adf0 ("xfrm: Try to honor policy index if it's supplied by user") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Mikulas Patocka authored
commit 81bc6d15 upstream. When the target line contains an invalid device, delay_ctr() will call delay_dtr() with NULL workqueue. Attempting to destroy the NULL workqueue causes a crash. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Stefan Mätje authored
commit 4ec73791 upstream. Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by:
Stefan Mätje <stefan.maetje@esd.eu> [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: stable@vger.kernel.org Signed-off-by:
-
Stefan Mätje authored
commit 86fa6a34 upstream. Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk. No functional change intended. Signed-off-by:
-
James Prestwood authored
commit 6afb7e26 upstream. When using PCI passthrough with this device, the host machine locks up completely when starting the VM, requiring a hard reboot. Add a quirk to avoid bus resets on this device. Fixes: c3e59ee4 ("PCI: Mark Atheros AR93xx to avoid bus reset") Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.comSigned-off-by:
James Prestwood <james.prestwood@linux.intel.com> Signed-off-by:
-
Yifeng Li authored
commit f627caf5 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display or starting the X server will crash and freeze the system, or garble the display. Experiments showed this problem can mostly be solved by adjusting the order of register writes. Also, sm712fb failed to consider the difference of clock frequency when unblanking the display, and programs the clock for SM712 to SM720. Fix them by adjusting the order of register writes, and adding an additional check for SM720 for programming the clock frequency. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Yifeng Li authored
commit 4ed7d2cc upstream. Loongson MIPS netbooks use 1024x600 LCD panels, which is the original target platform of this driver, but nearly all old x86 laptops have 1024x768. Lighting 768 panels using 600's timings would partially garble the display. Since it's not possible to distinguish them reliably, we change the default to 768, but keep 600 as-is on MIPS. Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD panel, this driver would probably garbled those display. As we don't have one for testing, the original behavior of the driver is kept as-is, but the problem has been documented is the comments. Signed-off-by:
-
Yifeng Li authored
commit 6053d3a4 upstream. In order to support the 1024x600 panel on Yeeloong Loongson MIPS laptop, the original 1024x768-16 table was modified to 1024x600-16, without leaving the original. It causes problem on x86 laptop as the 1024x768-16 support was still claimed but not working. Fix it by introducing the 1024x768-16 mode. Signed-off-by:
-
Yifeng Li authored
commit 9e0e5999 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X will crash the machine instantly, because the VRAM/framebuffer is not mapped correctly. On SM712, the framebuffer starts at the beginning of address space, but SM720's framebuffer starts at the 1 MiB offset from the beginning. However, sm712fb fails to take this into account, as a result, writing to the framebuffer will destroy all the registers and kill the system immediately. Another problem is the driver assumes 8 MiB of VRAM for SM720, but some SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM. Fix this problem by removing the hardcoded VRAM size, adding a function to query the amount of VRAM from register MCR76 on SM720, and adding proper framebuffer offset. Please note that the memory map may have additional problems on Big-Endian system, which is not available for testing by myself. But I highly suspect that the original code is also broken on Big-Endian machines for SM720, so at least we are not making the problem worse. More, the driver also assumed SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used in earlier laptops, such as IBM Thinkpad 240X, the driver would probably crash on them. I've never seen one of those machines and cannot fix it, but I have documented these problems in the comments. Signed-off-by:
-
Yifeng Li authored
commit ec1587d5 upstream. When the machine is booted in VGA mode, loading sm712fb would cause a glitch of random pixels shown on the screen. To prevent it from happening, we first clear the entire framebuffer, and we also need to stop calling smtcfb_setmode() during initialization, the fbdev layer will call it for us later when it's ready. Signed-off-by:
-
Yifeng Li authored
commit 80690538 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with sm712fb framebuffer driver would cause a white screen of death on the next POST, presumably the proper timings for the LCD panel was not reprogrammed properly by the BIOS. Experiments showed a few CRTC Scratch Registers, including CRT3D, CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is a hardware testing register, we shouldn't mess with it. CRT3C has blanking signal and line compare control, which is not needed for this driver. Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these registers don't have side-effect on other systems, writing to them is also highly questionable. Signed-off-by:
-
Yifeng Li authored
commit dcf90705 upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video RAM is not detected correctly by the xf86-video-siliconmotion driver. This is because sm712fb overwrites the GPR71 Scratch Pad Register, which is set by BIOS on x86 and used to indicate amount of VRAM. Other Scratch Pad Registers, including GPR70/74/75, don't have the same side-effect, but overwriting to them is still questionable, as they are not related to modesetting. Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75). Signed-off-by:
-
Yifeng Li authored
commit 5481115e upstream. On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with sm712fb framebuffer driver would cause the role of brightness up/down button to swap. Experiments showed the FPR30 register caused this behavior. Moreover, even if this register don't have side-effect on other systems, over- writing it is also highly questionable, since it was originally configurated by the motherboard manufacturer by hardwiring pull-down resistors to indicate the type of LCD panel. We should not mess with it. Stop writing to the SR30 (a.k.a FPR30) register. Signed-off-by:
-
Nathan Chancellor authored
commit 8ea58f1e upstream. Currently, this Makefile hardcodes GNU ar, meaning that if it is not available, there is no way to supply a different one and the build will fail. $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \ HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare ... AR /out/tools/objtool/libsubcmd.a /bin/sh: 1: ar: not found ... Follow the logic of HOST{CC,LD} and allow the user to specify a different ar tool via HOSTAR (which is used elsewhere in other tools/ Makefiles). Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com Link: https://github.com/ClangBuiltLinux/linux/issues/481Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Adrian Hunter authored
commit 1b6599a9 upstream. The sample timestamp is updated to ensure that the timestamp represents the time of the sample and not a branch that the decoder is still walking towards. The sample timestamp is updated when the decoder returns, but the decoder does not return for non-taken branches. Update the sample timestamp then also. Note that commit 3f04d98e ("perf intel-pt: Improve sample timestamp") was also a stable fix and appears, for example, in v4.4 stable tree as commit a4ebb58f ("perf intel-pt: Improve sample timestamp"). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 3f04d98e ("perf intel-pt: Improve sample timestamp") Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.comSigned-off-by:
-
Adrian Hunter authored
commit 61b6e08d upstream. The decoder uses its current timestamp in samples. Usually that is a timestamp that has already passed, but in some cases it is a timestamp for a branch that the decoder is walking towards, and consequently hasn't reached. The intel_pt_sample_time() function decides which is which, but was not handling TNT packets exactly correctly. In the case of TNT, the timestamp applies to the first branch, so the decoder must first walk to that branch. That means intel_pt_sample_time() should return true for TNT, and this patch makes that change. However, if the first branch is a non-taken branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false for subsequent taken branches in the same TNT packet. To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to distinguish the cases. Note that commit 3f04d98e ("perf intel-pt: Improve sample timestamp") was also a stable fix and appears, for example, in v4.4 stable tree as commit a4ebb58f ("perf intel-pt: Improve sample timestamp"). Signed-off-by:
-
Adrian Hunter authored
commit 7ba8fa20 upstream. The timestamp used to determine if an instruction sample is made, is an estimate based on the number of instructions since the last known timestamp. A consequence is that it might go backwards, which results in extra samples. Change it so that a sample is only made when the timestamp goes forwards. Note this does not affect a sampling period of 0 or sampling periods specified as a count of instructions. Example: Before: $ perf script --itrace=i10us ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 10 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 8 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 6 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 14 instructions:u: 7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 4 instructions:u: 7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222728: 16423 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222734: 12731 instructions:u: 7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so) ... After: $ perf script --itrace=i10us ls 13812 [003] 2167315.222583: 3270 instructions:u: 7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222667: 30902 instructions:u: 7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so) ls 13812 [003] 2167315.222728: 16479 instructions:u: 7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so) ... Signed-off-by:
-
Dmitry Osipenko authored
commit b906c056 upstream. Multiplying the Memory Controller clock rate by the tick count results in an integer overflow and in result the truncated tick value is being programmed into hardware, such that the GR3D memory client performance is reduced by two times. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Elazar Leibovich authored
commit cbe08bcb upstream. When reading only part of the id file, the ppos isn't tracked correctly. This is taken care by simple_read_from_buffer. Reading a single byte, and then the next byte would result EOF. While this seems like not a big deal, this breaks abstractions that reads information from files unbuffered. See for example https://github.com/golang/go/issues/29399 This code was mentioned as problematic in commit cd458ba9 ("tracing: Do not (ab)use trace_seq in event_id_read()") An example C code that show this bug is: #include <stdio.h> #include <stdint.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, char **argv) { if (argc < 2) return 1; int fd = open(argv[1], O_RDONLY); char c; read(fd, &c, 1); printf("First %c\n", c); read(fd, &c, 1); printf("Second %c\n", c); } Then run with, e.g. sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id You'll notice you're getting the first character twice, instead of the first two characters in the id file. Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com Cc: Orit Wasserman <orit.was@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 23725aee ("ftrace: provide an id file for each event") Signed-off-by:
Elazar Leibovich <elazar@lightbitslabs.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Jeff Layton authored
commit 00abf69d upstream. xfstest generic/452 was triggering a "Busy inodes after umount" warning. ceph was allowing the mount to go read-only without first flushing out dirty inodes in the cache. Ensure we sync out the filesystem before allowing a remount to proceed. Cc: stable@vger.kernel.org Link: http://tracker.ceph.com/issues/39571Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
commit 43a0541e upstream. Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of the TLB_FLUSH register differs from later Tegra generations that have 128 ASID's. In a result the PTE's are now flushed correctly from TLB and this fixes problems with graphics (randomly failing tests) on Tegra30. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
