- 19 Jul, 2022 2 commits
-
-
Horatiu Vultur authored
To add an entry to the MAC table, it is required first to setup the entry and then issue a command for the MAC to learn the entry. So if it happens for two threads to add simultaneously an entry in MAC table then it would be a race condition. Fix this by using lan966x->mac_lock to protect the HW access. Fixes: fc0c3fe7 ("net: lan966x: Add function lan966x_mac_ip_learn()") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Horatiu Vultur authored
When the HW deletes an entry in MAC table then it generates an interrupt. The SW will go through it's own list of MAC entries and if it is not found then it would notify the listeners about this. The problem is that when the SW will go through it's own list it would take a spin lock(lan966x->mac_lock) and when it notifies that the entry is deleted. But to notify the listeners it taking the rtnl_lock which is illegal. This is fixed by instead of notifying right away that the entry is deleted, move the entry on a temp list and once, it checks all the entries then just notify that the entries from temp list are deleted. Fixes: 5ccd66e0 ("net: lan966x: add support for interrupts from analyzer") Signed-off-by:
-
- 18 Jul, 2022 36 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== Update DSA documentation These are some updates of dsa.rst, since it hasn't kept up with development (in some cases, even since 2017). I've added Fixes: tags as I thought was appropriate. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The blamed commit updated the way in which VLANs are handled at the cross-chip notifier layer and didn't update the documentation to say that. Fix it. Fixes: 134ef238 ("net: dsa: add explicit support for host bridge VLANs") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Returning -EOPNOTSUPP does *NOT* mean anything special. port_vlan_add() is actually called from 2 code paths, one is vlan_vid_add() from 8021q module and the other is br_switchdev_port_vlan_add() from switchdev. The bridge has a wrapper __vlan_vid_add() which first tries via switchdev, then if that returns -EOPNOTSUPP, tries again via the VLAN RX filters in the 8021q module. But DSA doesn't distinguish between one call path and the other when calling the driver's port_vlan_add(), so if the driver returns -EOPNOTSUPP to switchdev, it also returns -EOPNOTSUPP to the 8021q module. And the latter is a hard error. port_fdb_add() is called from the deferred dsa_owq only, so obviously its return code isn't propagated anywhere, and cannot be interpreted in any way. The return code from port_mdb_add() is propagated to the bridge, but again, this doesn't do anything special when -EOPNOTSUPP is returned, but rather, br_switchdev_mdb_notify() returns void. Signed-off-by:
-
Vladimir Oltean authored
Switchdev has changed radically from its initial implementation, and the currently provided definition is incorrect and very confusing. Rewrite it in light of what it actually does. Fixes: 2bedde1a ("net: dsa: Move FDB dump implementation inside DSA") Signed-off-by:
-
Vladimir Oltean authored
The given definition for what VID 0 represents in the current port_fdb_add and port_mdb_add is blatantly wrong. Delete it and explain the concepts surrounding DSA's understanding of FDB isolation. Fixes: c2693363 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by:
-
Vladimir Oltean authored
This was deleted in 2017, stop documenting it. Fixes: dc0cbff3 ("net: dsa: Remove redundant MDB dump support") Signed-off-by:
-
Vladimir Oltean authored
This was deleted in 2017, delete the obsolete documentation. Fixes: c069fcd8 ("net: dsa: Remove support for bypass bridge port attributes/vlan set") Signed-off-by:
-
Vladimir Oltean authored
We've changed the API through which we can offload the bridge TX forwarding process. Update the documentation in light of the removal of 2 DSA switch ops. Fixes: b079922b ("net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join") Signed-off-by:
-
Vladimir Oltean authored
The provided information about FDB flushing is not really up to date. The DSA core automatically calls port_fast_age() when necessary, and drivers should just implement that rather than hooking it to port_bridge_leave, port_stp_state_set and others. Fixes: 732f794c ("net: dsa: add port fast ageing") Signed-off-by:
-
Vladimir Oltean authored
These methods were added without being documented, fix that. Fixes: fd292c18 ("net: dsa: tear down devlink port regions when tearing down the devlink port on error") Signed-off-by:
-
Vladimir Oltean authored
A teardown method was added to dsa_switch_ops without being documented. Do so now. Fixes: 5e3f847a ("net: dsa: Add teardown callback for drivers") Signed-off-by:
-
Vladimir Oltean authored
Support for changing the tagging protocol was added without this operation being documented; do so now. Fixes: 53da0eba ("net: dsa: allow changing the tag protocol via the "tagging" device attribute") Signed-off-by:
-
Vladimir Oltean authored
Changes were made to the prototype of get_tag_protocol without describing at a high level what they are about. Update the documentation to explain that. Fixes: 5ed4e3eb ("net: dsa: Pass a port to get_tag_protocol()") Fixes: 4d776482 ("net: dsa: Get information about stacked DSA protocol") Signed-off-by:
-
Vladimir Oltean authored
Since the blamed commit, the enum was turned into a function pointer and also renamed. Update the documentation. Fixes: 7b314362 ("net: dsa: Allow the DSA driver to indicate the tag protocol") Signed-off-by:
-
Vladimir Oltean authored
Document the changes that took place in the DSA core in the blamed commit. Fixes: 0650bf52 ("net: dsa: be compatible with masters which unregister on shutdown") Signed-off-by:
-
Vladimir Oltean authored
Since the blamed commit we don't have register_switch_driver() and unregister_switch_driver() anymore. Additionally, the expected dsa_register_switch() and dsa_unregister_switch() calls aren't documented. Update the probing section with the details of how things are currently done. Fixes: 93e86b3b ("net: dsa: Remove legacy probing support") Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== sysctl: Fix data-races around ipv4_net_table (Round 3). This series fixes data-races around 21 knobs after igmp_link_local_mcast_reports in ipv4_net_table. These 4 knobs are skipped because they are safe. - tcp_congestion_control: Safe with RCU and xchg(). - tcp_available_congestion_control: Read only. - tcp_allowed_congestion_control: Safe with RCU and spinlock(). - tcp_fastopen_key: Safe with RCU and xchg() So, round 4 will start with fib_multipath_use_neigh. ==================== Signed-off-by: -
Kuniyuki Iwashima authored
While reading sysctl_tcp_fastopen_blackhole_timeout, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_fastopen, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 2100c8d2 ("net-tcp: Fast Open base") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_max_syn_backlog, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_tw_reuse, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_notsent_lowat, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading these sysctl knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_retries1 - tcp_retries2 - tcp_orphan_retries - tcp_fin_timeout Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_reordering, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_migrate_req, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f9ac779f ("net: Introduce net.ipv4.tcp_migrate_req.") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_syncookies, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_syn(ack)?_retries, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_keepalive_(time|probes|intvl), they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_igmp_qrv, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv); Fixes: a9fe8e29 ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_igmp_max_msf, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_igmp_max_memberships, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_igmp_llm_reports, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. if (ipv4_is_local_multicast(pmc->multiaddr) && !READ_ONCE(net->ipv4.sysctl_igmp_llm_reports)) Fixes: df2cf4a7 ("IGMP: Inhibit reports for local multicast groups") Signed-off-by: -
Maksym Glubokiy authored
Adjusted as per packet processor documentation. This allows to properly match 'indev' for clsact rules. Fixes: 47327e19 ("net: prestera: acl: migrate to new vTCAM api") Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
-
Tariq Toukan authored
Socket destruction flow and tls_device_down function sync against each other using tls_device_lock and the context refcount, to guarantee the device resources are freed via tls_dev_del() by the end of tls_device_down. In the following unfortunate flow, this won't happen: - refcount is decreased to zero in tls_device_sk_destruct. - tls_device_down starts, skips the context as refcount is zero, going all the way until it flushes the gc work, and returns without freeing the device resources. - only then, tls_device_queue_ctx_destruction is called, queues the gc work and frees the context's device resources. Solve it by decreasing the refcount in the socket's destruction flow under the tls_device_lock, for perfect synchronization. This does not slow down the common likely destructor flow, in which both the refcount is decreased and the spinlock is acquired, anyway. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Reviewed-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
-
Junxiao Chang authored
When queue number is > 4, left shift overflows due to 32 bits integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1. If CONFIG_UBSAN is enabled, kernel dumps below warning: [ 10.363842] ================================================================== [ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/ linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12 [ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int' [ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg [ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021 [ 10.363958] Call Trace: [ 10.363960] <TASK> [ 10.363963] dump_stack_lvl+0x4a/0x5f [ 10.363971] dump_stack+0x10/0x12 [ 10.363974] ubsan_epilogue+0x9/0x45 [ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e [ 10.363979] ? wake_up_klogd+0x4a/0x50 [ 10.363983] ? vprintk_emit+0x8f/0x240 [ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac] [ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac] [ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac] [ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac] [ 10.364030] ? page_pool_alloc_pages+0x4d/0x70 [ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac] [ 10.364042] stmmac_open+0x39e/0x920 [stmmac] [ 10.364050] __dev_open+0xf0/0x1a0 [ 10.364054] __dev_change_flags+0x188/0x1f0 [ 10.364057] dev_change_flags+0x26/0x60 [ 10.364059] do_setlink+0x908/0xc40 [ 10.364062] ? do_setlink+0xb10/0xc40 [ 10.364064] ? __nla_validate_parse+0x4c/0x1a0 [ 10.364068] __rtnl_newlink+0x597/0xa10 [ 10.364072] ? __nla_reserve+0x41/0x50 [ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0 [ 10.364079] ? pskb_expand_head+0x75/0x310 [ 10.364082] ? nla_reserve_64bit+0x21/0x40 [ 10.364086] ? skb_free_head+0x65/0x80 [ 10.364089] ? security_sock_rcv_skb+0x2c/0x50 [ 10.364094] ? __cond_resched+0x19/0x30 [ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420 [ 10.364100] rtnl_newlink+0x49/0x70 This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue mapping warning. Fixes: d43042f4 ("net: stmmac: mapping mtl rx to dma channel") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195Reported-by:
Cedric Wassenaar <cedric@bytespeed.nl> Signed-off-by:
Junxiao Chang <junxiao.chang@intel.com> Reviewed-by:
-
Wong Vee Khee authored
Using current implementation of polling mode, there is high chances we will hit into timeout error when running phc2sys. Hence, update the implementation of hardware crosstimestamping to use the MAC interrupt service routine instead of polling for TSIS bit in the MAC Timestamp Interrupt Status register to be set. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
- 16 Jul, 2022 1 commit
-
-
Kuniyuki Iwashima authored
Commit e21145a9 ("ipv4: namespacify ip_early_demux sysctl knob") made it possible to enable/disable early_demux on a per-netns basis. Then, we introduced two knobs, tcp_early_demux and udp_early_demux, to switch it for TCP/UDP in commit dddb64bc ("net: Add sysctl to toggle early demux for tcp and udp"). However, the .proc_handler() was wrong and actually disabled us from changing the behaviour in each netns. We can execute early_demux if net.ipv4.ip_early_demux is on and each proto .early_demux() handler is not NULL. When we toggle (tcp|udp)_early_demux, the change itself is saved in each netns variable, but the .early_demux() handler is a global variable, so the handler is switched based on the init_net's sysctl variable. Thus, netns (tcp|udp)_early_demux knobs have nothing to do with the logic. Whether we CAN execute proto .early_demux() is always decided by init_net's sysctl knob, and whether we DO it or not is by each netns ip_early_demux knob. This patch namespacifies (tcp|udp)_early_demux again. For now, the users of the .early_demux() handler are TCP and UDP only, and they are called directly to avoid retpoline. So, we can remove the .early_demux() handler from inet6?_protos and need not dereference them in ip6?_rcv_finish_core(). If another proto needs .early_demux(), we can restore it at that time. Fixes: dddb64bc ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by:
-
- 15 Jul, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-14 This series contains updates to e1000e and igc drivers. Sasha re-enables GPT clock when exiting s0ix to prevent hardware unit hang and reverts a workaround for this issue on e1000e. Lennert Buytenhek restores checks for removed device while accessing registers to prevent NULL pointer dereferences for igc. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Reinstate IGC_REMOVED logic and implement it properly Revert "e1000e: Fix possible HW unit hang after an s0ix exit" e1000e: Enable GPT clock before sending message to CSME ==================== Link: https://lore.kernel.org/r/20220714175857.933537-1-anthony.l.nguyen@intel.comSigned-off-by:
-
