- 23 Apr, 2012 18 commits
-
-
Moger, Babu authored
Handler expects only one parameter to set the flag ALUA_OPTIMIZE_STPG. This flag is used to optimize the STPG behaviour. There is no change in behaviour by default. For example, to set the flag pass the following parameters from multipath.conf hardware_handler "2 alua 1" Signed-off-by:
Babu Moger <babu.moger@netapp.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Roland Dreier authored
Signed-off-by:
Roland Dreier <roland@purestorage.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
The ioc->pfacts member in the IOC structure is getting set to zero following a call to _base_get_ioc_facts due to the memset in that routine. So if the ioc->pfacts was read after a host reset, there would be a NULL pointer dereference. The routine _base_get_ioc_facts is called from context of host reset. The problem in _base_get_ioc_facts is the size of Mpi2IOCFactsReply is 64, whereas the sizeof "struct mpt2sas_facts" is 60, so there is a four byte overflow resulting from the memset. Also, there is memset in _base_get_port_facts using the incorrect structure, it should be "struct mpt2sas_port_facts" instead of Mpi2PortFactsReply. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> CC: stable@vger.kernel.org Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
[SCSI] mpt2sas: Fix for hard drive going OFFLINE when hard reset issued and simultaneously another hard drive is hot unplugged Following the host reset, the firmware discovery is reassigning another hard drive in the topology to the same device handle as that device is getting hot removed. Until the driver device removal routine is called, there will be two hard drive with the matching device handle in the internal device link list. In the device removal routine, a separate function which moves the device from BLOCKED into OFFLINE state. Since this routine is passed with the device handle passed as input parameter, the routine will be traversing the internal device link list searching for matching device handle. This results in two devices with matching device handle, therefore both devices goes OFFLINE. To fix this issue,the input parameter is changed from device handle to SAS address, therefore only the device that is hot unplugged will be placed in OFFLINE state. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Cc: stable@vger.kernel.org Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
[SCSI] mpt2sas: Set the phy identifier of the end device to the phy number of the parent device it is linked to The phy_identifier inside the routine _transport_set_identify() is set to sas_device_page_zero->PhyNum. This returns the phy number of the parent device this device is linked to. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
[SCSI] mpt2sas : While enabling phy, read the current port number from sas iounit page 0 instead of page 1 The port number is changing after disabling/enabling phys using the SysFS interface This is because the firmware behavour changed where it would read the the port number then set it to some different value even though Auto Port Config is turned on. With this change of behavour in FW, it is possible that the expanders are moved from one port to another after disabling /enabling phys. This is occuring because the port number in sas iounit page 1 is not matching up to the current port in page 0. In order to fix this the driver is modified to read the current port number from sas iounit page 0 instead of page 1. Also copy the port and phy flags over from page 0 to page 1. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
Fix several endian issues found by runing sparse. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
Modified the source code as per the findings reported by the source code analysis tool. Source code for the following functionalities has been touched. None of the driver functionalities has changed. - SMP Passthrough IOCTL - Debug messages for MPT Replies (i.e. bit 9 of Logging Level) - Task Management using sysfs - Device removal, i.e. when a target device (including any PD within a volume) is removed, and Volume Deletion. - Trace Buffer Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
[SCSI] mpt2sas: Improvement were made to better protect the sas_device, raid_device, and expander_device lists There were possible race conditions surrounding reading an object from the link list while from another context in the driver was removing it. The nature of this enhancement is to rearrange locking so the link lists are better protected. Change set: (1) numerous routines were rearranged so spin locks are held through the entire time a link list object is being read from or written to. (2) added new routines for object deletion from link list. Thus ensuring lock was held during the deletion of the link list object, then and memory for object freed outside the lock. The memory was freed outside the lock so driver had access to device object info which was required for notifying the scsi mid layer that a device was getting deleted. (3) added the ioc->blocking_handles parameter. This is a bitmask used to identify which devices need blocking when there is device loss. This was introduced so that lock can be held for the entire time traversing the link list objects, and the bitmask was set to indicate which device handles need blocking. Oustide the lock the ioc->blocking_handles bitmask is traversed, with the respective device handle the scsi mid layer is called for moving devices into blocking state. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
[SCSI] mpt2sas : Perform Target Reset instead of HBA reset when a SATA_PASSTHROUGH cmd timeout happens Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
Added support for Block IO requests with multiple segments (vectors) in the SMP handler of the SAS Transport Class. This is required by the BSG driver. Multisegment support added for both, Request and Response. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
When the lock_kernel and unlock_kernel routines were removed in the 2.6.39 kernel, a global mutex was added on top of the existing mutex which already existed. With this implementation, only one IOCTL will be active at any time no matter how many ever controllers are present. This causes poor performance. Removed the global mutex so that the driver can work with the existing semaphore that was already part of the existing code. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
nagalakshmi.nandigama@lsi.com authored
Changeset in MPI headers: 1) Bumped MPI2_HEADER_VERSION_UNIT 2) Added 4K sectors supported bit to CapabilitiesFlags field of IOC Page 6. 3) Added UEFIVersion field to BIOS Page 1 and defined additional BiosOptions bits to control UEFI behavior. Signed-off-by:
Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
adam radford authored
The following patch for megaraid_sas updates the driver version to v00.00.06.15-rc1, and updates Documentation/scsi/ChangeLog.megaraid_sas. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
adam radford authored
The following patch for megaraid_sas fixes the fastpath code decision logic to use fpRead/WriteCapable, fpRead/WriteAcrossStripe flags instead of the old logic. This fixes a bug where fastpath writes could be sent to a read only LD. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
adam radford authored
The following patch for megaraid_sas removes an incorrect comment and optimizes the setting of HostMSIxVectors. This was found during a code review by Tomas Henzl @ RedHat. Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Santosh Nayak authored
Data type of the 'tag' field of 'fw_flash_Update_resp' should be __le32. Data type of 'pHeader' should be __le32. Remove 2nd cast to 'piomb'. Signed-off-by:
Santosh Nayak <santoshprasadnayak@gmail.com> Acked-by:
Jack Wang <jack_wang@usish.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
- 19 Apr, 2012 20 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfixes from J. Bruce Fields: "One bugfix, and one minor header fix from Jeff Layton while we're here" * 'for-3.4' of git://linux-nfs.org/~bfields/linux: nfsd: include cld.h in the headers_install target nfsd: don't fail unchecked creates of non-special files
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "It's like a grab bag of one liners: - core: fix page flip error path, reorder object teardown. - usb: fix the drm_usb module license. - i915: VT switch on SNB with non-native modes fix, and a regression fix from 3.3. - radeon: missing unreserve on SI, AGP/VRAM setup fix (fixes radeon on IA64, but its a generic bug), an rn50 regression from 3.3, turn off MSIs on rv515 (it loses rearms every so often)." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: nouveau: Set special lane map for the right chipset drm/radeon: fix load detect on rn50 with hardcoded EDIDs. drm: Releasing FBs before releasing GEM objects during drm_release drm/nouveau/pm: don't read/write beyond end of stack buffer drivers: gpu: drm: gma500: mdfld_dsi_output.h: Remove not unneeded include of version.h radeon: fix r600/agp when vram is after AGP (v3) drm: fix page_flip error handling drm/radeon/kms: fix the regression of DVI connector check drm/usb: fix module license on drm/usb layer. drm/i915: Do not set "Enable Panel Fitter" on SNB pageflips drm/i915: Hold mode_config lock whilst changing mode for lastclose() drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2 drm/radeon: disable MSI on RV515 drm/i915: don't clobber the special upscaling lvds timings
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: lock slots_lock around device assignment KVM: VMX: Fix kvm_set_shared_msr() called in preemptible context KVM: unmap pages from the iommu when slots are removed KVM: PMU emulation: GLOBAL_CTRL MSR should be enabled on reset
-
Henrik Rydberg authored
The refactoring of the nv50 logic, introduced in 8663bc7c, modified the test for the special lane map used on some Apple computers with Nvidia chipsets. The tested MBA3,1 would still boot, but resume from suspend stopped working. This patch restores the old test, which fixes the problem. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Acked-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
When the force changes went in back in 3.3.0, we ended up returning disconnected in the !force case, and the connected in when forced, as it hit the hardcoded check. Fix it so all exits go via the hardcoded check and stop spurious modesets on platforms with hardcoded EDIDs. Reported-by: Evan McNabb (Red Hat) Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Prathyush authored
During DRM release, all the FBs and gem objects are released. If a gem object is being used as a FB and set to a crtc, it must not be freed before releasing the framebuffer first. If FBs are released first, the crtc using the FB is disabled first so now the GEM object can be freed safely. The CRTC will be enabled again when the driver restores fbdev mode. Signed-off-by:
Prathyush K <prathyush.k@samsung.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jim Meyering authored
NUL-terminate after strncpy. If the parameter "profile" has length 16 or more, then strncpy leaves "string" with no NUL terminator, so the following search for '\n' may read beyond the end of that 16-byte buffer. If it finds a newline there, then it will also write beyond the end of that stack buffer. Signed-off-by:
Jim Meyering <meyering@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Marcos Paulo de Souza authored
The output of "make versioncheck" points a incorrect include of version.h in the drivers/gpu/drm/gma500/mdfld_dsi_output.h: drivers/gpu/drm/gma500/mdfld_dsi_output.h: 32 linux/version.h not needed. If we take a look in the file, we can agree to remove it. Cc: David Airlie <airlied@linux.ie> Cc: <dri-devel@lists.freedesktop.org> Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jerome Glisse authored
If AGP is placed in the middle, the size_af is off-by-one, it results in VRAM being placed at 0x7fffffff instead of 0x8000000. v2: fix the vram_start setup. v3: also fix r7xx & newer ASIC Reported-by: russiane39 on #radeon Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Joonyoung Shim authored
Free event and restore event_space only when page_flip->flags has DRM_MODE_PAGE_FLIP_EVENT if page_flip() is failed. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Do not set "Enable Panel Fitter" on SNB pageflips drm/i915: Hold mode_config lock whilst changing mode for lastclose() drm/i915: don't clobber the special upscaling lvds timings
-
Takashi Iwai authored
The check of the encoder type in the commit [e00e8b5e: drm/radeon/kms: fix analog load detection on DVI-I connectors] is obviously wrong, and it's the culprit of the regression on my workstation with DVI-analog connection resulting in the blank output. Fixed the typo now. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Allows this module to load correctly with certain debugging options on. Reported on irc by scientes Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Hugh Dickins authored
My 9ce70c02 "memcg: fix deadlock by inverting lrucare nesting" put a nasty little bug into v3.3's version of mem_cgroup_replace_page_cache(), sometimes used for FUSE. Replacing __mem_cgroup_commit_charge_lrucare() by __mem_cgroup_commit_charge(), I used the "pc" pointer set up earlier: but it's for oldpage, and needs now to be for newpage. Once oldpage was freed, its PageCgroupUsed bit (cleared above but set again here) caused "Bad page state" messages - and perhaps worse, being missed from newpage. (I didn't find this by using FUSE, but in reusing the function for tmpfs.) Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org [v3.3 only] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: fix compile error in commoncap.c
-
Alex Williamson authored
As pointed out by Jason Baron, when assigning a device to a guest we first set the iommu domain pointer, which enables mapping and unmapping of memory slots to the iommu. This leaves a window where this path is enabled, but we haven't synchronized the iommu mappings to the existing memory slots. Thus a slot being removed at that point could send us down unexpected code paths removing non-existent pinnings and iommu mappings. Take the slots_lock around creating the iommu domain and initial mappings as well as around iommu teardown to avoid this race. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Jonghwan Choi authored
Add missing "personality.h" security/commoncap.c: In function 'cap_bprm_set_creds': security/commoncap.c:510: error: 'PER_CLEAR_ON_SETID' undeclared (first use in this function) security/commoncap.c:510: error: (Each undeclared identifier is reported only once security/commoncap.c:510: error: for each function it appears in.) Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
James Morris <james.l.morris@oracle.com>
-
Avi Kivity authored
kvm_set_shared_msr() may not be called in preemptible context, but vmx_set_msr() does so: BUG: using smp_processor_id() in preemptible [00000000] code: qemu-kvm/22713 caller is kvm_set_shared_msr+0x32/0xa0 [kvm] Pid: 22713, comm: qemu-kvm Not tainted 3.4.0-rc3+ #39 Call Trace: [<ffffffff8131fa82>] debug_smp_processor_id+0xe2/0x100 [<ffffffffa0328ae2>] kvm_set_shared_msr+0x32/0xa0 [kvm] [<ffffffffa03a103b>] vmx_set_msr+0x28b/0x2d0 [kvm_intel] ... Making kvm_set_shared_msr() work in preemptible is cleaner, but it's used in the fast path. Making two variants is overkill, so this patch just disables preemption around the call. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use flexible array in fuse.h fuse: allow nanosecond granularity fuse: O_DIRECT support for files fuse: fix nlink after unlink
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Martin Schwidefsky: "A couple of bug fixes, one of them is a TLB flush fix. Included as well is one small coding style patch and a patch to update the default configuration." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] Fix compile error in swab.h [S390] Fix stfle() lowcore protection problem [S390] cpum_cf: get rid of compile warnings [S390] irq: simple coding style change [S390] update default configuration [S390] fix tlb flushing for page table pages [S390] kernel: Use local_irq_save() for memcpy_real() [S390] s390/char/vmur.c: fix memory leak [S390] drivers/s390/block/dasd_eckd.c: add missing dasd_sfree_request
-
- 18 Apr, 2012 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security subsystem fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: fcaps: clear the same personality flags as suid when fcaps are used mpi: Avoid using freed pointer in mpi_lshift_limbs() Smack: move label list initialization
-
Lasse Collin authored
The BCJ filters were meant to be enabled already on these archs, but the xz_wrap.sh script was buggy. Enabling the filters should give smaller kernel images. xz_wrap.sh will now use $SRCARCH instead of $ARCH to detect the architecture. That way it doesn't need to care about the subarchs (like i386 vs. x86_64) since the BCJ filters don't care either. Signed-off-by:
Lasse Collin <lasse.collin@tukaani.org> Acked-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-