- 15 Jun, 2017 22 commits
-
-
Marc Zyngier authored
Add a handler for reading the guest's view of the ICV_RPR_EL1 register, returning the highest active priority. Tested-by:
Alexander Graf <agraf@suse.de> Acked-by:
David Daney <david.daney@cavium.com> Acked-by:
Christoffer Dall <cdall@linaro.org> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
Add a handler for writing the guest's view of the ICC_DIR_EL1 register, performing the deactivation of an interrupt if EOImode is set ot 1. Tested-by:
-
David Daney authored
Some Cavium Thunder CPUs suffer a problem where a KVM guest may inadvertently cause the host kernel to quit receiving interrupts. Use the Group-0/1 trapping in order to deal with it. [maz]: Adapted patch to the Group-0/1 trapping, reworked commit log Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
-
David Daney authored
Tested-by:
-
Marc Zyngier authored
Now that we're able to safely handle Group-0 sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.group0_trap). Tested-by:
-
Marc Zyngier authored
In order to be able to trap Group-0 GICv3 system registers, we need to set ICH_HCR_EL2.TALL0 begore entering the guest. This is conditionnaly done after having restored the guest's state, and cleared on exit. Tested-by:
-
Marc Zyngier authored
A number of Group-0 registers can be handled by the same accessors as that of Group-1, so let's add the required system register encodings and catch them in the dispatching function. Tested-by:
-
Marc Zyngier authored
Add a handler for reading/writing the guest's view of the ICC_IGRPEN0_EL1 register, which is located in the ICH_VMCR_EL2.VENG0 field. Tested-by:
-
Marc Zyngier authored
Add a handler for reading/writing the guest's view of the ICC_BPR0_EL1 register, which is located in the ICH_VMCR_EL2.BPR0 field. Tested-by:
-
Marc Zyngier authored
Now that we're able to safely handle Group-1 sysreg access, let's give the user the opportunity to enable it by passing a specific command-line option (vgic_v3.group1_trap). Tested-by:
-
Marc Zyngier authored
In order to be able to trap Group-1 GICv3 system registers, we need to set ICH_HCR_EL2.TALL1 before entering the guest. This is conditionally done after having restored the guest's state, and cleared on exit. Tested-by:
-
Marc Zyngier authored
Add a handler for reading the guest's view of the ICV_HPPIR1_EL1 register. This is a simple parsing of the available LRs, extracting the highest available interrupt. Tested-by:
-
Marc Zyngier authored
Add a handler for reading/writing the guest's view of the ICV_AP1Rn_EL1 registers. We just map them to the corresponding ICH_AP1Rn_EL2 registers. Tested-by:
-
Marc Zyngier authored
Add a handler for writing the guest's view of the ICC_EOIR1_EL1 register. This involves dropping the priority of the interrupt, and deactivating it if required (EOImode == 0). Tested-by:
-
Marc Zyngier authored
Add a handler for reading the guest's view of the ICC_IAR1_EL1 register. This involves finding the highest priority Group-1 interrupt, checking against both PMR and the active group priority, activating the interrupt and setting the group priority as active. Tested-by:
-
Marc Zyngier authored
Add a handler for reading/writing the guest's view of the ICC_IGRPEN1_EL1 register, which is located in the ICH_VMCR_EL2.VENG1 field. Tested-by:
-
Marc Zyngier authored
Add a handler for reading/writing the guest's view of the ICC_BPR1_EL1 register, which is located in the ICH_VMCR_EL2.BPR1 field. Tested-by:
-
Marc Zyngier authored
In order to start handling guest access to GICv3 system registers, let's add a hook that will get called when we trap a system register access. This is gated by a new static key (vgic_v3_cpuif_trap). Tested-by:
-
Marc Zyngier authored
As we're about to trap CP15 accesses and handle them at EL2, we need to evaluate whether or not the condition flags are valid, as an implementation is allowed to trap despite the condition not being met. Tagging the function as __hyp_text allows this. We still rely on the cc_map array to be mapped at EL2 by virtue of being "const", and the linker to only emit relative references. Tested-by:
-
Marc Zyngier authored
As we're about to access the Active Priority registers a lot more, let's define accessors that take the register number as a parameter. Tested-by:
-
Marc Zyngier authored
It is often useful to compare an ESR syndrome reporting the trapping of a system register with a value matching that system register. Since encoding both the sysreg and the ESR version seem to be a bit overkill, let's add a set of macros that convert an ESR value into the corresponding sysreg encoding. We handle both AArch32 and AArch64, taking advantage of identical encodings between system registers and CP15 accessors. Tested-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
-
Marc Zyngier authored
-
- 08 Jun, 2017 9 commits
-
-
Christoffer Dall authored
The PMU IRQ number is set through the VCPU device's KVM_SET_DEVICE_ATTR ioctl handler for the KVM_ARM_VCPU_PMU_V3_IRQ attribute, but there is no enforced or stated requirement that this must happen after initializing the VGIC. As a result, calling vgic_valid_spi() which relies on the nr_spis being set during the VGIC init can incorrectly fail. Introduce irq_is_spi, which determines if an IRQ number is within the SPI range without verifying it against the actual VGIC properties. Signed-off-by:
-
Christoffer Dall authored
When injecting an IRQ to the VGIC, you now have to present an owner token for that IRQ line to show that you are the owner of that line. IRQ lines driven from userspace or via an irqfd do not have an owner and will simply pass a NULL pointer. Also get rid of the unused kvm_vgic_inject_mapped_irq prototype. Signed-off-by:
-
Christoffer Dall authored
We check if other in-kernel devices have already been connected to the GIC for a particular interrupt line when possible. For the PMU, we can do this whenever setting the PMU interrupt number from userspace. For the timers, we have to wait until we try to enable the timer, because we have a concept of default IRQ numbers that userspace shouldn't have to work around in the initialization phase. Signed-off-by:
-
Christoffer Dall authored
Having multiple devices being able to signal the same interrupt line is very confusing and almost certainly guarantees a configuration error. Therefore, introduce a very simple allocator which allows a device to claim an interrupt line from the vgic for a given VM. Signed-off-by:
-
Christoffer Dall authored
First we define an ABI using the vcpu devices that lets userspace set the interrupt numbers for the various timers on both the 32-bit and 64-bit KVM/ARM implementations. Second, we add the definitions for the groups and attributes introduced by the above ABI. (We add the PMU define on the 32-bit side as well for symmetry and it may get used some day.) Third, we set up the arch-specific vcpu device operation handlers to call into the timer code for anything related to the KVM_ARM_VCPU_TIMER_CTRL group. Fourth, we implement support for getting and setting the timer interrupt numbers using the above defined ABI in the arch timer code. Fifth, we introduce error checking upon enabling the arch timer (which is called when first running a VCPU) to check that all VCPUs are configured to use the same PPI for the timer (as mandated by the architecture) and that the virtual and physical timers are not configured to use the same IRQ number. Signed-off-by:
-
Christoffer Dall authored
We currently initialize the arch timer IRQ numbers from the reset code, presumably because we once intended to model multiple CPU or SoC types from within the kernel and have hard-coded reset values in the reset code. As we are moving towards userspace being in charge of more fine-grained CPU emulation and stitching together the pieces needed to emulate a particular type of CPU, we should no longer have a tight coupling between resetting a VCPU and setting IRQ numbers. Therefore, move the logic to define and use the default IRQ numbers to the timer code and set the IRQ number immediately when creating the VCPU. Signed-off-by:
-
Christoffer Dall authored
We are about to need this define in the arch timer code as well so move it to a common location. Signed-off-by:
-
Christoffer Dall authored
As we are about to support VCPU attributes to set the timer IRQ numbers in guest.c, move the static inlines for the VCPU attributes handlers from the header file to guest.c. Signed-off-by:
-
Christoffer Dall authored
Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by:
-
- 06 Jun, 2017 5 commits
-
-
Marc Zyngier authored
We currently have the HSCTLR.A bit set, trapping unaligned accesses at HYP, but we're not really prepared to deal with it. Since the rest of the kernel is pretty happy about that, let's follow its example and set HSCTLR.A to zero. Modern CPUs don't really care. Cc: stable@vger.kernel.org Signed-off-by:
-
Marc Zyngier authored
We currently have the SCTLR_EL2.A bit set, trapping unaligned accesses at EL2, but we're not really prepared to deal with it. So far, this has been unnoticed, until GCC 7 started emitting those (in particular 64bit writes on a 32bit boundary). Since the rest of the kernel is pretty happy about that, let's follow its example and set SCTLR_EL2.A to zero. Modern CPUs don't really care. Cc: stable@vger.kernel.org Reported-by:
-
Marc Zyngier authored
__do_hyp_init has the rather bad habit of ignoring RES1 bits and writing them back as zero. On a v8.0-8.2 CPU, this doesn't do anything bad, but may end-up being pretty nasty on future revisions of the architecture. Let's preserve those bits so that we don't have to fix this later on. Cc: stable@vger.kernel.org Signed-off-by:
-
Marc Zyngier authored
Under memory pressure, we start ageing pages, which amounts to parsing the page tables. Since we don't want to allocate any extra level, we pass NULL for our private allocation cache. Which means that stage2_get_pud() is allowed to fail. This results in the following splat: [ 1520.409577] Unable to handle kernel NULL pointer dereference at virtual address 00000008 [ 1520.417741] pgd = ffff810f52fef000 [ 1520.421201] [00000008] *pgd=0000010f636c5003, *pud=0000010f56f48003, *pmd=0000000000000000 [ 1520.429546] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 1520.435156] Modules linked in: [ 1520.438246] CPU: 15 PID: 53550 Comm: qemu-system-aar Tainted: G W 4.12.0-rc4-00027-g1885c397eaec #7205 [ 1520.448705] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB12A 10/26/2016 [ 1520.463726] task: ffff800ac5fb4e00 task.stack: ffff800ce04e0000 [ 1520.469666] PC is at stage2_get_pmd+0x34/0x110 [ 1520.474119] LR is at kvm_age_hva_handler+0x44/0xf0 [ 1520.478917] pc : [<ffff0000080b137c>] lr : [<ffff0000080b149c>] pstate: 40000145 [ 1520.486325] sp : ffff800ce04e33d0 [ 1520.489644] x29: ffff800ce04e33d0 x28: 0000000ffff40064 [ 1520.494967] x27: 0000ffff27e00000 x26: 0000000000000000 [ 1520.500289] x25: ffff81051ba65008 x24: 0000ffff40065000 [ 1520.505618] x23: 0000ffff40064000 x22: 0000000000000000 [ 1520.510947] x21: ffff810f52b20000 x20: 0000000000000000 [ 1520.516274] x19: 0000000058264000 x18: 0000000000000000 [ 1520.521603] x17: 0000ffffa6fe7438 x16: ffff000008278b70 [ 1520.526940] x15: 000028ccd8000000 x14: 0000000000000008 [ 1520.532264] x13: ffff7e0018298000 x12: 0000000000000002 [ 1520.537582] x11: ffff000009241b93 x10: 0000000000000940 [ 1520.542908] x9 : ffff0000092ef800 x8 : 0000000000000200 [ 1520.548229] x7 : ffff800ce04e36a8 x6 : 0000000000000000 [ 1520.553552] x5 : 0000000000000001 x4 : 0000000000000000 [ 1520.558873] x3 : 0000000000000000 x2 : 0000000000000008 [ 1520.571696] x1 : ffff000008fd5000 x0 : ffff0000080b149c [ 1520.577039] Process qemu-system-aar (pid: 53550, stack limit = 0xffff800ce04e0000) [...] [ 1521.510735] [<ffff0000080b137c>] stage2_get_pmd+0x34/0x110 [ 1521.516221] [<ffff0000080b149c>] kvm_age_hva_handler+0x44/0xf0 [ 1521.522054] [<ffff0000080b0610>] handle_hva_to_gpa+0xb8/0xe8 [ 1521.527716] [<ffff0000080b3434>] kvm_age_hva+0x44/0xf0 [ 1521.532854] [<ffff0000080a58b0>] kvm_mmu_notifier_clear_flush_young+0x70/0xc0 [ 1521.539992] [<ffff000008238378>] __mmu_notifier_clear_flush_young+0x88/0xd0 [ 1521.546958] [<ffff00000821eca0>] page_referenced_one+0xf0/0x188 [ 1521.552881] [<ffff00000821f36c>] rmap_walk_anon+0xec/0x250 [ 1521.558370] [<ffff000008220f78>] rmap_walk+0x78/0xa0 [ 1521.563337] [<ffff000008221104>] page_referenced+0x164/0x180 [ 1521.569002] [<ffff0000081f1af0>] shrink_active_list+0x178/0x3b8 [ 1521.574922] [<ffff0000081f2058>] shrink_node_memcg+0x328/0x600 [ 1521.580758] [<ffff0000081f23f4>] shrink_node+0xc4/0x328 [ 1521.585986] [<ffff0000081f2718>] do_try_to_free_pages+0xc0/0x340 [ 1521.592000] [<ffff0000081f2a64>] try_to_free_pages+0xcc/0x240 [...] The trivial fix is to handle this NULL pud value early, rather than dereferencing it blindly. Cc: stable@vger.kernel.org Signed-off-by:
-
Christoffer Dall authored
We used to extract PRIbits from the ICH_VT_EL2 which was the upper field in the register word, so a mask wasn't necessary, but as we switched to looking at PREbits, which is bits 26 through 28 with the PRIbits field being potentially non-zero, we really need to mask off the field value, otherwise fun things may happen. Signed-off-by:
-
- 04 Jun, 2017 4 commits
-
-
Andrew Jones authored
The timer work is only scheduled for a VCPU when that VCPU is blocked. This means we only need to wake it up, not kick (IPI) it. While calling kvm_vcpu_kick() would just do the wake up, and not kick, anyway, let's change this to avoid request-less vcpu kicks, as they're generally not a good idea (see "Request-less VCPU Kicks" in Documentation/virtual/kvm/vcpu-requests.rst) Signed-off-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
-
Andrew Jones authored
Refactor PMU overflow handling in order to remove the request-less vcpu kick. Now, since kvm_vgic_inject_irq() uses vcpu requests, there should be no chance that a kick sent at just the wrong time (between the VCPU's call to kvm_pmu_flush_hwstate() and before it enters guest mode) results in a failure for the guest to see updated GIC state until its next exit some time later for some other reason. Signed-off-by:
-
Andrew Jones authored
Don't use request-less VCPU kicks when injecting IRQs, as a VCPU kick meant to trigger the interrupt injection could be sent while the VCPU is outside guest mode, which means no IPI is sent, and after it has called kvm_vgic_flush_hwstate(), meaning it won't see the updated GIC state until its next exit some time later for some other reason. The receiving VCPU only needs to check this request in VCPU RUN to handle it. By checking it, if it's pending, a memory barrier will be issued that ensures all state is visible. See "Ensuring Requests Are Seen" of Documentation/virtual/kvm/vcpu-requests.rst Signed-off-by:
-
Andrew Jones authored
A request called EXIT is too generic. All requests are meant to cause exits, but different requests have different flags. Let's not make it difficult to decide if the EXIT request is correct for some case by just always providing unique requests for each case. This patch changes EXIT to SLEEP, because that's what the request is asking the VCPU to do. Signed-off-by:
-
