- 23 Feb, 2022 1 commit
-
-
Harman Kalra authored
Since there are two workqueues implemented in CPTPF driver - one for handling mailbox requests from VFs and another for handling FLR. In both cases PF driver will forward the request to AF driver by writing to mailbox memory. A race condition may arise if two simultaneous requests are written to mailbox memory. Introducing locking mechanism to maintain synchronization between multiple mailbox accesses. Signed-off-by:
Harman Kalra <hkalra@marvell.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
- 18 Feb, 2022 18 commits
-
-
Dominik Brodowski authored
The rng_quality sysfs attribute returns the quality setting for the currently active hw_random device, in entropy bits per 1024 bits of input. Storing a value between 0 and 1024 to this file updates this estimate accordingly. Based on the updates to the quality setting, the rngd kernel thread may be stopped (if no hw_random device is trusted to return entropy), may be started (if the quality setting is increased from zero), or may use a different hw_random source (if that has higher quality output). Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Dominik Brodowski authored
The current_quality variable exposed as a module parameter is fundamentally broken: If it is set at boot time, it is overwritten once the first hw rng device is loaded; if it is set at runtime, it is without effect if the hw rng device had its quality value set to 0 (and no default_quality was set); and if a new rng is selected, it gets overwritten. Therefore, mark it as obsolete, and replace it by the per-rng quality setting. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
Extract the start/stop logic for the in-kernel rngd thread to a separate function. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
There is no real reason why this list needs to be kept ordered by the driver-provided quality value -- a value which is set only by a handful of hw_random devices anyway. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Corentin Labbe authored
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk is not the same than generic implementation. In fact ECB does not use an IV. Fixes: ce0183cb ("crypto: rockchip - switch to skcipher API") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Kai Ye authored
It is not need to enable sm4 extra mode in at HW V3. Here is fix it. Signed-off-by:
Kai Ye <yekai13@huawei.com> Signed-off-by:
-
Kai Ye authored
Added the register configuration of the SVA mode for HW V3. Signed-off-by:
-
Julia Lawall authored
Platform_driver probe functions aren't called with locks held and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead. Problem found with Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Rikard Falkeborn authored
The only usage of these is to pass their address to sysfs_{create,remove}_group(), which takes pointers to const struct attribute_group. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Rikard Falkeborn authored
The only usage of omap_sham_attr_group is to pass its address to sysfs_{create,remove}_group(), which takes pointers to const struct attribute_group. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: -
Rikard Falkeborn authored
The only usage of omap_aes_attr_group is to pass its address to sysfs_{create,remove}_group(), which takes pointers to const struct attribute_group. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: -
Wojciech Ziemba authored
Add support for HW QAT Power Management (PM) feature. This feature is enabled at init time (1) by sending an admin message to the firmware, targeting the admin AE, that sets the idle time before the device changes state and (2) by unmasking the PM source of interrupt in ERRMSK2. The interrupt handler is extended to handle a PM interrupt which is triggered by HW when a PM transition occurs. In this case, the driver responds acknowledging the transaction using the HOST_MSG mailbox. Signed-off-by:
Wojciech Ziemba <wojciech.ziemba@intel.com> Co-developed-by:
Marcinx Malinowski <marcinx.malinowski@intel.com> Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by:
Marco Chiappero <marco.chiappero@intel.com> Signed-off-by:
-
Wojciech Ziemba authored
Move error source related CSRs from 4xxx to the wider GEN4 header file. Signed-off-by:
-
Wojciech Ziemba authored
In an effort to reduce the amount of workqueues, scattered across the QAT driver, introduce the misc workqueue. This queue will be used to handle bottom halves, Power Management and more in the future. The function adf_misc_wq_queue_work() has been added to simplify the enqueuing of jobs. Signed-off-by:
-
Herbert Xu authored
The lrw template relies on ecb to work. So we need to declare a Kconfig dependency as well as a module softdep on it. Signed-off-by: -
Herbert Xu authored
The xts module needs ecb to be present as it's meant to work on top of ecb. This patch adds a softdep so ecb can be included automatically into the initramfs. Reported-by:
rftc <rftc@gmx.de> Signed-off-by:
-
Andy Shevchenko authored
While in this particular case it would not be a (critical) issue, the pattern itself is bad and error prone in case the location of the parameter is changed. Don't cast parameter to unsigned long pointer in the bit operations. Instead copy to a local variable on stack of a proper type and use. Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Corentin Labbe authored
crypto had a typo, fix it. Signed-off-by:
-
- 11 Feb, 2022 5 commits
-
-
Ard Biesheuvel authored
The ARM version of the accelerated XOR routines are simply the 8-way C routines passed through the auto-vectorizer with SIMD codegen enabled. This used to require GCC version 4.6 at least, but given that 5.1 is now the baseline, this check is no longer necessary, and actually misidentifies Clang as GCC < 4.6 as Clang defines the GCC major/minor as well, but makes no attempt at doing this in a way that conveys feature parity with a certain version of GCC (which would not be a great idea in the first place). So let's drop the version check, and make the auto-vectorize pragma (which is based on a GCC-specific command line option) GCC-only. Since Clang performs SIMD auto-vectorization by default at -O2, no pragma is necessary here. Tested-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/496 Link: https://github.com/ClangBuiltLinux/linux/issues/503Signed-off-by:
-
Ard Biesheuvel authored
Modern compilers are perfectly capable of extracting parallelism from the XOR routines, provided that the prototypes reflect the nature of the input accurately, in particular, the fact that the input vectors are expected not to overlap. This is not documented explicitly, but is implied by the interchangeability of the various C routines, some of which use temporary variables while others don't: this means that these routines only behave identically for non-overlapping inputs. So let's decorate these input vectors with the __restrict modifier, which informs the compiler that there is no overlap. While at it, make the input-only vectors pointer-to-const as well. Tested-by:
-
Tudor Ambarus authored
Add support for the TDES IP found on sama7g5. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Stephan Müller authored
FIPS 140 requires a minimum security strength of 112 bits. This implies that the HMAC key must not be smaller than 112 in FIPS mode. This restriction implies that the test vectors for HMAC that have a key that is smaller than 112 bits must be disabled when FIPS support is compiled. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Stephan Müller authored
By adding the support for the flag fips_skip, hash / HMAC test vectors may be marked to be not applicable in FIPS mode. Such vectors are silently skipped in FIPS mode. Signed-off-by:
-
- 05 Feb, 2022 16 commits
-
-
Colin Ian King authored
Pointers in_sg and out_sg are being initialized with values that are never read, they are being re-assigned the same values later on. The initializations are redundant, remove them in preference to the later assignments that are closer to when the pointers are being used. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
Variable c_size is being initialized with a value that is never read, it is being re-assigned with a different value later on. The initialization is redundant and can be removed. Signed-off-by:
-
Shijith Thotton authored
No issues were found while using the driver with dm-crypt enabled. So CONFIG_DM_CRYPT check in the driver can be removed. This also fixes the NULL pointer dereference in driver release if CONFIG_DM_CRYPT is enabled. ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... Call trace: crypto_unregister_alg+0x68/0xfc crypto_unregister_skciphers+0x44/0x60 otx2_cpt_crypto_exit+0x100/0x1a0 otx2_cptvf_remove+0xf8/0x200 pci_device_remove+0x3c/0xd4 __device_release_driver+0x188/0x234 device_release_driver+0x2c/0x4c ... Fixes: 6f03f0e8 ("crypto: octeontx2 - register with linux crypto framework") Signed-off-by:
Shijith Thotton <sthotton@marvell.com> Signed-off-by:
-
Tianjia Zhang authored
The multibuffer algorithms was removed already in 2018, so it is necessary to clear the test code left by tcrypt. Suggested-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Acked-by:
-
Kavyasree Kotagiri authored
This patch adds support for hardware version of AES and SHA IPs available on lan966x SoC. Signed-off-by:
Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Reviewed-by:
-
Dominik Brodowski authored
In case the entropy quality is low, there may be less than one bit to credit in the call to add_hwgenerator_randomness(): The number of bytes returned by rng_get_data() multiplied by the current quality (in entropy bits per 1024 bits of input) must be larger than 128 to credit at least one bit. However, imx-rngc.c sets the quality to 19, but may return less than 32 bytes; hid_u2fzero.c sets the quality to 1; and users may override the quality setting manually. In case there is less than one bit to credit, keep track of it and add that credit to the next iteration. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Ard Biesheuvel authored
Even though the kernel's implementations of AES-XTS were updated to implement ciphertext stealing and can operate on inputs of any size larger than or equal to the AES block size, this feature is rarely used in practice. In fact, in the kernel, AES-XTS is only used to operate on 4096 or 512 byte blocks, which means that not only the ciphertext stealing is effectively dead code, the logic in the bit sliced NEON implementation to deal with fewer than 8 blocks at a time is also never used. Since the bit-sliced NEON driver already depends on the plain NEON version, which is slower but can operate on smaller data quantities more straightforwardly, let's fallback to the plain NEON implementation of XTS for any residual inputs that are not multiples of 128 bytes. This allows us to remove a lot of complicated logic that rarely gets exercised in practice. Signed-off-by:
-
Ard Biesheuvel authored
Instead of processing the entire input with the 8-way bit sliced algorithm, which is sub-optimal for inputs that are not a multiple of 128 bytes in size, invoke the plain NEON version of CTR for the remainder of the input after processing the bulk using 128 byte strides. This allows us to greatly simplify the asm code that implements CTR, and get rid of all the branches and special code paths. It also gains us a couple of percent of performance. Signed-off-by:
-
Ard Biesheuvel authored
Instead of falling back to C code to deal with the final bit of input that is not a round multiple of the block size, handle this in the asm code, permitting us to use overlapping loads and stores for performance, and implement the 16-byte wide XOR using a single NEON instruction. Since NEON loads and stores have a natural width of 16 bytes, we need to handle inputs of less than 16 bytes in a special way, but this rarely occurs in practice so it does not impact performance. All other input sizes can be consumed directly by the NEON asm code, although it should be noted that the core AES transform can still only process 128 bytes (8 AES blocks) at a time. Signed-off-by:
-
Ard Biesheuvel authored
Instead of falling back to C code to do a memcpy of the output of the last block, handle this in the asm code directly if possible, which is the case if the entire input is longer than 16 bytes. Cc: Nathan Huckleberry <nhuck@google.com> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Srujana Challa authored
LDWB is getting incorrectly used in HW when CPT_AF_LF()_PTR_CTL[IQB_LDWB]=1 and CPT instruction queue has less than 320 free entries. So, increase HW instruction queue size by 320 and give 320 entries less for SW/NIX RX as a SW workaround. Signed-off-by:
Srujana Challa <schalla@marvell.com> Signed-off-by:
-
Srujana Challa authored
When CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to LLC/DRAM encounters a fault/poison, a rare case may result in unpredictable data being delivered to a CPT engine. So, this patch adds code to set FLT_DIS as a workaround. Signed-off-by:
-
Srujana Challa authored
When software sets CPT_AF_CTL[RNM_REQ_EN]=1 and RNM in not producing entropy(i.e., RNM_ENTROPY_STATUS[NORMAL_CNT] < 0x40), the first cycle of the response may be lost due to a conditional clocking issue. Due to this, the subsequent random number stream will be corrupted. So, this patch adds support to ensure RNM_ENTROPY_STATUS[NORMAL_CNT] = 0x40 before writing CPT_AF_CTL[RNM_REQ_EN] = 1, as a workaround. Signed-off-by:
-
Dominik Brodowski authored
For two reasons, current_quality may become zero within the rngd kernel thread: (1) The user lowers current_quality to 0 by writing to the sysfs module parameter file (note that increasing the quality from zero is without effect at the moment), or (2) there are two or more hwrng devices registered, and those which provide quality>0 are unregistered, but one with quality==0 remains. If current_quality is 0, the randomness is not trusted and cannot help to increase the entropy count. That will lead to continuous calls to the hwrngd thread and continuous stirring of the input pool with untrusted bits. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
In case the user-specified rng device is not working, it is not used; therefore cur_rng_set_by_user must not be set to 1. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
Using rng_buffer in add_early_randomness() may race with rng_dev_read(). Use rng_fillbuf instead, as it is otherwise only used within the kernel by hwrng_fillfn() and therefore never exposed to userspace. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
