The wait_for_completion_timeout function returns 0 if timed out or a
positive value if completed. Hence, "less than zero" comparison always
misses timeouts and doesn't kill the URB as it should, leading to
re-sending it while it is active.

Fixes: 42337b9d ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The previous commit fixed handling of incomplete packets but broke error
handling: offsetof returns an unsigned value (size_t), but when compared
against the signed return value, the return value is interpreted as if
it were unsigned, so negative return values are never less than the
offset.

To make the code easier to read, calculate the minimal packet length
once and separately, and assign it to a signed int variable to eliminate
unsigned math and the need for type casts. It then becomes immediately
obvious how the actual data length is calculated and why the return
value cannot be less than the minimal length.

Fixes: 22d65765 ("HID: u2fzero: ignore incomplete packets without data")
Fixes: 42337b9d ("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.

This behaviour triggers the release_timer, removing the fingers even
though they are still present.

To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The cl_data field of a privdata must be allocated and updated before
using in amd_sfh_hid_client_init() function.

Hence handling NULL pointer cl_data accordingly.

Fixes: d46ef750 ("HID: amd_sfh: Fix potential NULL pointer dereference")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since the actual_length calculation is performed unsigned, packets
shorter than 7 bytes (e.g. packets without data or otherwise truncated)
or non-received packets ("zero" bytes) can cause buffer overflow.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437
Fixes: 42337b9d("HID: add driver for U2F Zero built-in LED and RNG")
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at
registration that will cause NULL pointer dereference since
corresponding data is not initialized yet. The patch moves
initialization of data before devm_add_action_or_reset().

Found by Linux Driver Verification project (linuxtesting.org).

[jkosina@suse.cz: rebase]
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add the new PIDs to wacom_wac.c to support the new models in the Intuos series.

[jkosina@suse.cz: fix changelog]
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong.

Below is a report descriptor.

0x05, 0x01,         /*  Usage Page (Desktop),                           */
0x09, 0x06,         /*  Usage (Keyboard),                               */
0xA1, 0x01,         /*  Collection (Application),                       */
0x85, 0x01,         /*      Report ID (1),                              */
0x05, 0x07,         /*      Usage Page (Keyboard),                      */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */
0x19, 0xE0,         /*      Usage Minimum (KB Leftcontrol),             */
0x29, 0xE7,         /*      Usage Maximum (KB Right GUI),               */
0x75, 0x01,         /*      Report Size (1),                            */
0x95, 0x08,         /*      Report Count (8),                           */
0x81, 0x02,         /*      Input (Variable),                           */
0x95, 0x05,         /*      Report Count (5),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x05, 0x08,         /*      Usage Page (LED),                           */
0x19, 0x01,         /*      Usage Minimum (01h),                        */
0x29, 0x05,         /*      Usage Maximum (05h),                        */
0x91, 0x02,         /*      Output (Variable),                          */
0x95, 0x01,         /*      Report Count (1),                           */
0x75, 0x03,         /*      Report Size (3),                            */
0x91, 0x03,         /*      Output (Constant, Variable),                */
0x95, 0x08,         /*      Report Count (8),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */

here is a report descriptor which is parsed one in kernel.
see sys/kernel/debug/hid/<dev>/rdesc

05 01 09 06 a1 01 85 01 05 07
15 00 25 01 19 e0 29 e7 75 01
95 08 81 02 95 05 75 01 05 08
19 01 29 05 91 02 95 01 75 03
91 03 95 08 75 01 15 00 25 01
06 00 ff 09 03 81 03 95 06 75
08 15 00 25 [65] 05 07 19 00 29
[65] 81 00 95 01 75 01 15 00 25
01 05 0c 09 b8 81 02 95 01 75
01 06 01 ff 09 03 81 02 95 01
75 06 81 03 06 02 ff 09 55 85
55 15 00 26 ff 00 75 08 95 40
b1 a2 c0 06 00 ff 09 14 a1 01
85 90 05 84 75 01 95 03 15 00
25 01 09 61 05 85 09 44 09 46
81 02 95 05 81 01 75 08 95 01
15 00 26 ff 00 09 65 81 02 c0
00

Position 64(Logical Maximum) and 70(Usage Maximum) are 101.
Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support.
position 117 is also 101 but not related(it is Usage 65h).

There are no difference of product id between JIS and ANSI.
They are same 0x0267.
Signed-off-by: Mizuho Mori <morimolymoly@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.

So this patch checks hid_device's input is non empty before it's been used.

Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com
Signed-off-by: F.A. SULAIMAN <asha.16@itfac.mrt.ac.lk>
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - Fix in i2c-hid driver for Elan touchpad quirk regression (Jim
   Broadus)

 - Quirk preventing ASUS Claymore from accidentally suspending whole
   system (Luke D. Jones)

 - Updates to the existing FW reporting mechanism, MP2 FW status checks,
   adding proper power management support for amd-sfh (Basavaraj
   Natikar)

 - Regression fix for an issue in HID core that got uncovered by recent
   USB core cleanup leading to issues when transfer_buffer_length is not
   in line with wLength (Alan Stern)

 - Memory leak fix in USB HID core (Anirudh Rayabharam)

 - Improvement of stylus battery reporting (Dmitry Torokhov)

 - Power management improvement for Goodix driver (Douglas Anderson)

 - High-resolution scroll support for Magicmouse devices (José Expósito)

 - Support for GHLive PS4 dongles (Daniel Nguyen)

 - Support proper EV_MSC emissions to hid-apple (Vincent Lefevre)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
  HID: usbhid: Simplify code in hid_submit_ctrl()
  HID: usbhid: Fix warning caused by 0-length input reports
  HID: usbhid: Fix flood of "control queue full" messages
  HID: sony: Fix more ShanWan clone gamepads to not rumble when plugged in.
  HID: sony: support for the ghlive ps4 dongles
  HID: thrustmaster: clean up Makefile and adapt quirks
  HID: i2c-hid: Fix Elan touchpad regression
  HID: asus: Prevent Claymore sending suspend event
  HID: amd_sfh: Add dyndbg prints for debugging
  HID: amd_sfh: Add support for PM suspend and resume
  HID: amd_sfh: Move hid probe after sensor is enabled
  HID: amd_sfh: Add command response to check command status
  HID: amd_sfh: Fix period data field to enable sensor
  HID: logitech-hidpp: battery: provide CAPACITY property for newer devices
  HID: thrustmaster: Fix memory leak in thrustmaster_interrupts()
  HID: thrustmaster: Fix memory leak in remove
  HID: thrustmaster: Fix memory leaks in probe
  HID: elo: update the reference count of the usb device structure
  HID: logitech-hidpp: Use 'atomic_inc_return' instead of hand-writing it
  HID: apple: Add missing scan code event for keys handled by hid-apple
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.15 kernel cycle, no
  core changes at all this time, just driver work!

  New drivers:

   - New subdriver for Intel Keem Bay (an ARM-based SoC)

   - New subdriver for Qualcomm MDM9607 and SM6115

   - New subdriver for ST Microelectronics STM32MP135

   - New subdriver for Freescale i.MX8ULP ("Ultra Low Power")

   - New subdriver for Ingenic X2100

   - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO

   - Support Samsung Exynos850

   - Support Renesas RZ/G2L

  Enhancements:

   - A major refactoring of the Rockchip driver, breaking part of it out
     to a separate GPIO driver in drivers/gpio

   - Pin bias support on Renesas r8a77995

   - Add SCI pins support to Ingenic JZ4755 and JZ4760

   - Mediatek device tree bindings converted to YAML"

* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
  pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
  pinctrl: samsung: Add Exynos850 SoC specific data
  dt-bindings: pinctrl: samsung: Add Exynos850 doc
  MAINTAINERS: Add maintainers for amd-pinctrl driver
  pinctrl: Add Intel Keem Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
  pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
  dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
  dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
  dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
  dt-bindings: mediatek: convert pinctrl to yaml
  arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
  arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
  pinctrl: ingenic: Add .max_register in regmap_config
  pinctrl: ingenic: Fix bias config for X2000(E)
  pinctrl: ingenic: Fix incorrect pull up/down info
  pinctrl: Ingenic: Add pinctrl driver for X2100.
  dt-bindings: pinctrl: Add bindings for Ingenic X2100.
  pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
  pinctrl: Ingenic: Improve the code.
  ...

Pull clk updates from Stephen Boyd:
 "Nothing changed in the clk framework core this time around. We did get
  some updates to the basic clk types to use determine_rate for the
  divider type and add a power of two fractional divider flag though.

  Otherwise, this is a collection of clk driver updates. More than half
  the diffstat is in the Qualcomm clk driver where we add a bunch of
  data to describe clks on various SoCs and fix bugs. The other big new
  thing in here is the Mediatek MT8192 clk driver. That's been under
  review for a while and it's nice to see that it's finally upstream.

  Beyond that it's the usual set of minor fixes and tweaks to clk
  drivers. There are some non-clk driver bits in here which have all
  been acked by the respective maintainers.

  New Drivers:
   - Support video, gpu, display clks on qcom sc7280 SoCs
   - GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
   - Multimedia clks (MMCC) on qcom MSM8994/MSM8992
   - RPMh clks on qcom SM6350 SoCs
   - Support for Mediatek MT8192 SoCs
   - Add display (DU and DSI) clocks on Renesas R-Car V3U
   - Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
     resets on Renesas RZ/G2L

  Updates:
   - Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
   - Add power of two flag to fractional divider clk type
   - Migrate some clk drivers to clk_divider_ops.determine_rate
   - Migrate to clk_parent_data in gcc-sdm660
   - Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
   - Switch from .round_rate to .determine_rate in clk-divider-gate
   - Fix clock tree update for TF-A controlled clocks for all i.MX8M
   - Add missing M7 core clock for i.MX8MN
   - YAML conversion of rk3399 clock controller binding
   - Removal of GRF dependency for the rk3328/rk3036 pll types
   - Drop CLK_IS_CRITICAL flag from Tegra fuse clk
   - Make CLK_R9A06G032 Kconfig symbol invisible
   - Convert various DT bindings to YAML"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
  dt-bindings: clock: samsung: fix header path in example
  clk: tegra: fix old-style declaration
  clk: qcom: Add SM6350 GCC driver
  MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
  dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
  dt-bindings: clock: samsung: convert Exynos4 to dtschema
  dt-bindings: clock: samsung: convert Exynos3250 to dtschema
  dt-bindings: clock: samsung: convert Exynos542x to dtschema
  dt-bindings: clock: samsung: add bindings for Exynos external clock
  dt-bindings: clock: samsung: convert Exynos5250 to dtschema
  clk: vc5: Add properties for configuring SD/OE behavior
  clk: vc5: Use dev_err_probe
  dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
  dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
  clk: zynqmp: Fix kernel-doc format
  clk: at91: clk-generated: Limit the requested rate to our range
  clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
  clk: zynqmp: Fix a memory leak
  clk: zynqmp: Check the return type
  ...

Pull mailbox updates from Jassi Brar:

 - mtk:
     - added support for mt8192 and mt8195
     - minor fix regarding address shift

 - qcom:
     - added compatibles for MSM8953, SM6350 and SM6115
     - enable loading IPCC as a module

 - misc:
     - change Altera maintainer
     - fix sti kernel-doc warnings

* tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: cmdq: add multi-gce clocks support for mt8195
  mailbox: cmdq: add mediatek mailbox support for mt8195
  dt-bindings: gce: add gce header file for mt8195
  dt-bindings: mailbox: add definition for mt8195
  mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC
  dt-bindings: mailbox: Add compatible for the MSM8953
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350
  mailbox: qcom: Add support for SM6115 APCS IPC
  dt-bindings: mailbox: qcom: Add SM6115 APCS compatible
  soc: mediatek: cmdq: add address shift in jump
  mailbox: cmdq: add mt8192 support
  dt-binding: gce: add gce header file for mt8192
  MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer
  mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module
  mailbox: sti: quieten kernel-doc warnings

Merge tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - Move all the Intel drivers into their own subdir(s) (mostly Kate's
     work)

   - New meraki-mx100 platform driver

   - Asus WMI driver enhancements, including support for
     /sys/firmware/acpi/platform_profile

   - New BIOS SAR driver for Intel M.2 WWAM modems

   - Alder Lake support for the Intel PMC driver

   - A whole bunch of cleanups + fixes all over the place"

* tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
  platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call
  platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning
  platform/x86: ISST: use semi-colons instead of commas
  platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
  platform/x86: asus-wmi: Delete impossible condition
  platform/x86: hp_accel: Convert to be a platform driver
  platform/x86: hp_accel: Remove _INI method call
  platform/mellanox: mlxbf-pmc: fix kernel-doc notation
  platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH
  platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core
  platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
  platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver
  platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory
  platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory
  platform/x86: intel-vbtn: Move to intel sub-directory
  platform/x86: intel_oaktrail: Move to intel sub-directory
  platform/x86: intel_int0002_vgpio: Move to intel sub-directory
  platform/x86: intel-hid: Move to intel sub-directory
  platform/x86: intel_atomisp2: Move to intel sub-directory
  platform/x86: intel_speed_select_if: Move to intel sub-directory
  ...

Pull VFIO updates from Alex Williamson:

 - Fix dma-valid return WAITED implementation (Anthony Yznaga)

 - SPDX license cleanups (Cai Huoqing)

 - Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
   support future vendor provided vfio-pci variants (Yishai Hadas, Max
   Gurtovoy, Jason Gunthorpe)

 - Replace duplicated reflck with core support for managing first open,
   last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
   Hadas)

 - Fix non-modular mdev support and don't nag about request callback
   support (Christoph Hellwig)

 - Add semaphore to protect instruction intercept handler and replace
   open-coded locks in vfio-ap driver (Tony Krowiak)

 - Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)

* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
  vfio/pci: Introduce vfio_pci_core.ko
  vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
  vfio: Use select for eventfd
  PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
  PCI: Add 'override_only' field to struct pci_device_id
  vfio/pci: Move module parameters to vfio_pci.c
  vfio/pci: Move igd initialization to vfio_pci.c
  vfio/pci: Split the pci_driver code out of vfio_pci_core.c
  vfio/pci: Include vfio header in vfio_pci_core.h
  vfio/pci: Rename ops functions to fit core namings
  vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
  vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
  vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
  vfio/ap_ops: Convert to use vfio_register_group_dev()
  s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
  s390/vfio-ap: r/w lock for PQAP interception handler function pointer
  vfio/type1: Fix vfio_find_dma_valid return
  vfio-pci/zdev: Remove repeated verbose license text
  vfio: platform: reset: Convert to SPDX identifier
  vfio: Remove struct vfio_device_ops open/release
  ...

Pull xen updates from Juergen Gross:

 - some small cleanups

 - a fix for a bug when running as Xen PV guest which could result in
   not all memory being transferred in case of a migration of the guest

 - a small series for getting rid of code for supporting very old Xen
   hypervisor versions nobody should be using since many years now

 - a series for hardening the Xen block frontend driver

 - a fix for Xen PV boot code issuing warning messages due to a stray
   preempt_disable() on the non-boot processors

* tag 'for-linus-5.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: remove stray preempt_disable() from PV AP startup code
  xen/pcifront: Removed unnecessary __ref annotation
  x86: xen: platform-pci-unplug: use pr_err() and pr_warn() instead of raw printk()
  drivers/xen/xenbus/xenbus_client.c: fix bugon.cocci warnings
  xen/blkfront: don't trust the backend response data blindly
  xen/blkfront: don't take local copy of a request from the ring page
  xen/blkfront: read response from backend only once
  xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests
  xen: assume XENFEAT_mmu_pt_update_preserve_ad being set for pv guests
  xen: check required Xen features
  xen: fix setting of max_pfn in shared_info

Pull parisc architecture updates from Helge Deller:

 - Fix a kernel crash when a signal is delivered to bad userspace stack

 - Fix fall-through warnings in math-emu code

 - Increase size of gcc stack frame check

 - Switch coding from 'pci_' to 'dma_' API

 - Make struct parisc_driver::remove() return void

 - Some parisc related Makefile changes

 - Minor cleanups, e.g. change to octal permissions, fix macro
   collisions, fix PMD_ORDER collision, replace spaces with tabs

* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: math-emu: Fix fall-through warnings
  parisc: fix crash with signals and alloca
  parisc: Fix compile failure when building 64-bit kernel natively
  parisc: ccio-dma.c: Added tab instead of spaces
  parisc/parport_gsc: switch from 'pci_' to 'dma_' API
  parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
  parisc: switch from 'pci_' to 'dma_' API
  parisc: Make struct parisc_driver::remove() return void
  parisc: remove unused arch/parisc/boot/install.sh and its phony target
  parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
  parisc: math-emu: Avoid "fmt" macro collision
  parisc: Increase size of gcc stack frame check
  parisc: Replace symbolic permissions with octal permissions

Pull Xtensa updates from Max Filippov:

 - fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

 - add fairness to handling IRQs of the same priority

 - fix pointer usage before NULL check in ISS console driver

 - build system cleanups

* tag 'xtensa-20210902' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: move core-y in arch/xtensa/Makefile to arch/xtensa/Kbuild
  xtensa: build platform directories unconditionally
  xtensa: do not build variants directory
  xtensa: remove unneeded exports
  xtensa: ISS: don't use string pointer before NULL check
  xtensa: add fairness to IRQ handling
  xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

Pull memory model updates from Ingo Molnar:
 "LKMM updates:

   - Update documentation and code example

  KCSAN updates:

   - Introduce CONFIG_KCSAN_STRICT (which RCU uses)

   - Optimize use of get_ctx() by kcsan_found_watchpoint()

   - Rework atomic.h into permissive.h

   - Add the ability to ignore writes that change only one bit of a
     given data-racy variable.

   - Improve comments"

* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/memory-model: Document data_race(READ_ONCE())
  tools/memory-model: Heuristics using data_race() must handle all values
  tools/memory-model: Add example for heuristic lockless reads
  tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
  kcsan: Make strict mode imply interruptible watchers
  kcsan: permissive: Ignore data-racy 1-bit value changes
  kcsan: Print if strict or non-strict during init
  kcsan: Rework atomic.h into permissive.h
  kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
  kcsan: Introduce CONFIG_KCSAN_STRICT
  kcsan: Remove CONFIG_KCSAN_DEBUG
  kcsan: Improve some Kconfig comments

Pull integrity subsystem updates from Mimi Zohar:

 - Limit the allowed hash algorithms when writing security.ima xattrs or
   verifying them, based on the IMA policy and the configured hash
   algorithms.

 - Return the calculated "critical data" measurement hash and size to
   avoid code duplication. (Preparatory change for a proposed LSM.)

 - and a single patch to address a compiler warning.

* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  IMA: reject unknown hash algorithms in ima_get_hash_algo
  IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
  IMA: introduce a new policy option func=SETXATTR_CHECK
  IMA: add a policy option to restrict xattr hash algorithms on appraisal
  IMA: add support to restrict the hash algorithms used for file appraisal
  IMA: block writes of the security.ima xattr with unsupported algorithms
  IMA: remove the dependency on CRYPTO_MD5
  ima: Add digest and digest_len params to the functions to measure a buffer
  ima: Return int in the functions to measure a buffer
  ima: Introduce ima_get_current_hash_algo()
  IMA: remove -Wmissing-prototypes warning

Pull hardening updates from Kees Cook:

 - Expand lib/test_stackinit to include more initialization styles

 - Improve Kconfig for CLang's auto-var-init feature

 - Introduce support for GCC's zero-call-used-regs feature

* tag 'hardening-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  lib/test_stackinit: Add assigned initializers
  lib/test_stackinit: Allow building stand-alone
  lib/test_stackinit: Fix static initializer test
  hardening: Clarify Kconfig text for auto-var-init
  hardening: Introduce CONFIG_ZERO_CALL_USED_REGS

Merge tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "This KUnit update for Linux 5.15-rc1 adds new features and tests:

  Tool:

   - support for '--kernel_args' to allow setting module params

   - support for '--raw_output' option to show just the kunit output
     during make

  Tests:

   - new KUnit tests for checksums and timestamps

   - Print test statistics on failure

   - Integrates UBSAN into the KUnit testing framework. It fails KUnit
     tests whenever it reports undefined behavior"

* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Print test statistics on failure
  kunit: tool: make --raw_output support only showing kunit output
  kunit: tool: add --kernel_args to allow setting module params
  kunit: ubsan integration
  fat: Add KUnit tests for checksums and timestamps

Pull memblock updates from Mike Rapoport:
 "Robustness and debug improvements:

   - add check for memory add/cap ordering

   - add missing debug code to memblock_add_node()"

* tag 'memblock-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Check memory add/cap ordering
  memblock: Add missing debug code to memblock_add_node()

Pull dma-mapping updates from Christoph Hellwig:

 - fix debugfs initialization order (Anthony Iliopoulos)

 - use memory_intersects() directly (Kefeng Wang)

 - allow to return specific errors from ->map_sg (Logan Gunthorpe,
   Martin Oliveira)

 - turn the dma_map_sg return value into an unsigned int (me)

 - provide a common global coherent pool іmplementation (me)

* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
  hexagon: use the generic global coherent pool
  dma-mapping: make the global coherent pool conditional
  dma-mapping: add a dma_init_global_coherent helper
  dma-mapping: simplify dma_init_coherent_memory
  dma-mapping: allow using the global coherent pool for !ARM
  ARM/nommu: use the generic dma-direct code for non-coherent devices
  dma-direct: add support for dma_coherent_default_memory
  dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
  dma-mapping: disallow .map_sg operations from returning zero on error
  dma-mapping: return error code from dma_dummy_map_sg()
  x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
  x86/amd_gart: return error code from gart_map_sg()
  xen: swiotlb: return error code from xen_swiotlb_map_sg()
  parisc: return error code from .map_sg() ops
  sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
  sparc/iommu: return error codes from .map_sg() ops
  s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
  s390/pci: return error code from s390_dma_map_sg()
  powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
  powerpc/iommu: return error code from .map_sg() ops
  ...

Pull configfs updates from Christoph Hellwig:

 - fix a race in configfs_lookup (Sishuai Gong)

 - minor cleanups (me)

* tag 'configfs-5.15' of git://git.infradead.org/users/hch/configfs:
  configfs: fix a race in configfs_lookup()
  configfs: fold configfs_attach_attr into configfs_lookup
  configfs: simplify the configfs_dirent_is_ready
  configfs: return -ENAMETOOLONG earlier in configfs_lookup

Pull dlm updates from David Teigland:
 "This set includes a number of minor fixes and cleanups related to the
  networking changes in the last release.

  A patch to delay ack messages reduces network traffic significantly"

* tag 'dlm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  fs: dlm: avoid comms shutdown delay in release_lockspace
  fs: dlm: fix return -EINTR on recovery stopped
  fs: dlm: implement delayed ack handling
  fs: dlm: move receive loop into receive handler
  fs: dlm: fix multiple empty writequeue alloc
  fs: dlm: generic connect func
  fs: dlm: auto load sctp module
  fs: dlm: introduce generic listen
  fs: dlm: move to static proto ops
  fs: dlm: introduce con_next_wq helper
  fs: dlm: cleanup and remove _send_rcom
  fs: dlm: clear CF_APP_LIMITED on close
  fs: dlm: fix typo in tlv prefix
  fs: dlm: use READ_ONCE for config var
  fs: dlm: use sk->sk_socket instead of con->sock

Instead of just marking the buffer as having overflowed, fill it up as
much as we can.  That will allow the overflow case to then return
whatever truncated result if it wants to.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'kvmalloc()' is a convenience function for people who want to do a
kmalloc() but fall back on vmalloc() if there aren't enough physically
contiguous pages, or if the allocation is larger than what kmalloc()
supports.

However, let's make sure it doesn't get _too_ easy to do crazy things
with it.  In particular, don't allow big allocations that could be due
to integer overflow or underflow.  So make sure the allocation size fits
in an 'int', to protect against trivial integer conversion issues.
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ext4 updates from Ted Ts'o:
 "In addition to some ext4 bug fixes and cleanups, this cycle we add the
  orphan_file feature, which eliminates bottlenecks when doing a large
  number of parallel truncates and file deletions, and move the discard
  operation out of the jbd2 commit thread when using the discard mount
  option, to better support devices with slow discard operations"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: make the updating inode data procedure atomic
  ext4: remove an unnecessary if statement in __ext4_get_inode_loc()
  ext4: move inode eio simulation behind io completeion
  ext4: Improve scalability of ext4 orphan file handling
  ext4: Orphan file documentation
  ext4: Speedup ext4 orphan inode handling
  ext4: Move orphan inode handling into a separate file
  ext4: Support for checksumming from journal triggers
  ext4: fix race writing to an inline_data file while its xattrs are changing
  jbd2: add sparse annotations for add_transaction_credits()
  ext4: fix sparse warnings
  ext4: Make sure quota files are not grabbed accidentally
  ext4: fix e2fsprogs checksum failure for mounted filesystem
  ext4: if zeroout fails fall back to splitting the extent node
  ext4: reduce arguments of ext4_fc_add_dentry_tlv
  ext4: flush background discard kwork when retry allocation
  ext4: get discard out of jbd2 commit kthread contex
  ext4: remove the repeated comment of ext4_trim_all_free
  ext4: add new helper interface ext4_try_to_trim_range()
  ext4: remove the 'group' parameter of ext4_trim_extent
  ...

Pull overlayfs update from Miklos Szeredi:

 - Copy up immutable/append/sync/noatime attributes (Amir Goldstein)

 - Improve performance by enabling RCU lookup.

 - Misc fixes and improvements

The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument.  The ->get_acl() API was updated based on
comments from Al and Linus:

Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/

* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: enable RCU'd ->get_acl()
  vfs: add rcu argument to ->get_acl() callback
  ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
  ovl: use kvalloc in xattr copy-up
  ovl: update ctime when changing fileattr
  ovl: skip checking lower file's i_writecount on truncate
  ovl: relax lookup error on mismatch origin ftype
  ovl: do not set overlay.opaque for new directories
  ovl: add ovl_allow_offline_changes() helper
  ovl: disable decoding null uuid with redirect_dir
  ovl: consistent behavior for immutable/append-only inodes
  ovl: copy up sync/noatime fileattr flags
  ovl: pass ovl_fs to ovl_check_setxattr()
  fs: add generic helper for filling statx attribute flags

Pull erofs updates from Gao Xiang:
 "In this cycle, direct I/O and fsdax support for uncompressed files are
  now added in order to avoid double-caching for loop device and VM
  container use cases. All uncompressed cases are now turned into iomap
  infrastructure, which looks much simpler and cleaner.

  In addition, fiemap support is added for both (un)compressed files by
  using iomap infrastructure as well so end users can easily get file
  distribution. We've also added chunk-based uncompressed files support
  for data deduplication as the next step of VM container use cases.

  Summary:

   - support direct I/O for all uncompressed files

   - support fsdax for non-tailpacking regular files

   - use iomap infrastructure for all uncompressed cases

   - support fiemap for both (un)compressed files

   - introduce chunk-based files for chunk deduplication

   - some cleanups"

* tag 'erofs-for-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix double free of 'copied'
  erofs: support reading chunk-based uncompressed files
  erofs: introduce chunk-based file on-disk format
  erofs: add fiemap support with iomap
  erofs: add support for the full decompressed length
  erofs: remove the mapping parameter from erofs_try_to_free_cached_page()
  erofs: directly use wrapper erofs_page_is_managed() when shrinking
  erofs: convert all uncompressed cases to iomap
  erofs: dax support for non-tailpacking regular file
  erofs: iomap support for non-tailpacking DIO

Merge tag 'fscache-next-20210829' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull fscache updates from David Howells:
 "Preparatory work for the fscache rewrite that's being worked on and
  fix some bugs. These include:

   - Always select netfs stats when enabling fscache stats since they're
     displayed through the same procfile.

   - Add a cookie debug ID that can be used in tracepoints instead of a
     pointer and cache it in the netfs_cache_resources struct rather
     than in the netfs_read_request struct to make it more available.

   - Use file_inode() in cachefiles rather than dereferencing
     file->f_inode directly.

   - Provide a procfile to display fscache cookies.

   - Remove the fscache and cachefiles histogram procfiles.

   - Remove the fscache object list procfile.

   - Avoid using %p in fscache and cachefiles as the value is hashed and
     not comparable to the register dump in an oops trace.

   - Fix the cookie hash function to actually achieve useful dispersion.

   - Fix fscache_cookie_put() so that it doesn't dereference the cookie
     pointer in the tracepoint after the refcount has been decremented
     (we're only allowed to do that if we decremented it to zero).

   - Use refcount_t rather than atomic_t for the fscache_cookie
     refcount"

* tag 'fscache-next-20210829' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: Use refcount_t for the cookie refcount instead of atomic_t
  fscache: Fix fscache_cookie_put() to not deref after dec
  fscache: Fix cookie key hashing
  cachefiles: Change %p in format strings to something else
  fscache: Change %p in format strings to something else
  fscache: Remove the object list procfile
  fscache, cachefiles: Remove the histogram stuff
  fscache: Procfile to display cookies
  fscache: Add a cookie debug ID and use that in traces
  cachefiles: Use file_inode() rather than accessing ->f_inode
  netfs: Move cookie debug ID to struct netfs_cache_resources
  fscache: Select netfs stats if fscache stats are enabled

Due to a rebase damage, we lost the rtnl_lock() when the patch was
sent out.  This causes an RTNL imbalance and failed assertions, due to
missing RTNL protection, for instance:

  RTNL: assertion failed at net/wireless/reg.c (4025)
  WARNING: CPU: 60 PID: 1720 at net/wireless/reg.c:4025 regulatory_set_wiphy_regd_sync+0x7f/0x90 [cfg80211]
  Call Trace:
   iwl_mvm_init_mcc+0x170/0x190 [iwlmvm]
   iwl_op_mode_mvm_start+0x824/0xa60 [iwlmvm]
   iwl_opmode_register+0xd0/0x130 [iwlwifi]
   init_module+0x23/0x1000 [iwlmvm]

Fix this by adding the missing rtnl_lock() back to the code.

Fixes: eb09ae93 ("iwlwifi: mvm: load regdomain at INIT stage")
Link: https://lore.kernel.org/lkml/CAHk-=wjB_zBwZ+WR9LOpvgjvaQn=cqryoKigod8QnZs=iYGEhA@mail.gmail.com/Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs updates from Darrick Wong:
 "There's a lot in this cycle.

  Starting with bug fixes: To avoid livelocks between the logging code
  and the quota code, we've disabled the ability of quotaoff to turn off
  quota accounting. (Admins can still disable quota enforcement, but
  truly turning off accounting requires a remount.) We've tried to do
  this in a careful enough way that there shouldn't be any user visible
  effects aside from quotaoff no longer randomly hanging the system.

  We've also fixed some bugs in runtime log behavior that could trip up
  log recovery if (otherwise unrelated) transactions manage to start and
  commit concurrently; some bugs in the GETFSMAP ioctl where we would
  incorrectly restrict the range of records output if the two xfs
  devices are of different sizes; a bug that resulted in fallocate
  funshare failing unnecessarily; and broken behavior in the xfs inode
  cache when DONTCACHE is in play.

  As for new features: we now batch inode inactivations in percpu
  background threads, which sharply decreases frontend thread wait time
  when performing file deletions and should improve overall directory
  tree deletion times. This eliminates both the problem where closing an
  unlinked file (especially on a frozen fs) can stall for a long time,
  and should also ease complaints about direct reclaim bogging down on
  unlinked file cleanup.

  Starting with this release, we've enabled pipelining of the XFS log.
  On workloads with high rates of metadata updates to different shards
  of the filesystem, multiple threads can be used to format committed
  log updates into log checkpoints.

  Lastly, with this release, two new features have graduated to
  supported status: inode btree counters (for faster mounts), and
  support for dates beyond Y2038. Expect these to be enabled by default
  in a future release of xfsprogs.

  Summary:

   - Fix a potential log livelock on busy filesystems when there's so
     much work going on that we can't finish a quotaoff before filling
     up the log by removing the ability to disable quota accounting.

   - Introduce the ability to use per-CPU data structures in XFS so that
     we can do a better job of maintaining CPU locality for certain
     operations.

   - Defer inode inactivation work to per-CPU lists, which will help us
     batch that processing. Deletions of large sparse files will
     *appear* to run faster, but all that means is that we've moved the
     work to the backend.

   - Drop the EXPERIMENTAL warnings from the y2038+ support and the
     inode btree counters, since it's been nearly a year and no
     complaints have come in.

   - Remove more of our bespoke kmem* variants in favor of using the
     standard Linux calls.

   - Prepare for the addition of log incompat features in upcoming
     cycles by actually adding code to support this.

   - Small cleanups of the xattr code in preparation for landing support
     for full logging of extended attribute updates in a future cycle.

   - Replace the various log shutdown state and flag code all over xfs
     with a single atomic bit flag.

   - Fix a serious log recovery bug where log item replay can be skipped
     based on the start lsn of a transaction even though the transaction
     commit lsn is the key data point for that by enforcing start lsns
     to appear in the log in the same order as commit lsns.

   - Enable pipelining in the code that pushes log items to disk.

   - Drop ->writepage.

   - Fix some bugs in GETFSMAP where the last fsmap record reported for
     a device could extend beyond the end of the device, and a separate
     bug where query keys for one device could be applied to another.

   - Don't let GETFSMAP query functions edit their input parameters.

   - Small cleanups to the scrub code's handling of perag structures.

   - Small cleanups to the incore inode tree walk code.

   - Constify btree function parameters that aren't changed, so that
     there will never again be confusion about range query functions
     changing their input parameters.

   - Standardize the format and names of tracepoint data attributes.

   - Clean up all the mount state and feature flags to use wrapped
     bitset functions instead of inconsistently open-coded flag checks.

   - Fix some confusion between xfs_buf hash table key variable vs.
     block number.

   - Fix a mis-interaction with iomap where we reported shared delalloc
     cow fork extents to iomap, which would cause the iomap unshare
     operation to return IO errors unnecessarily.

   - Fix DONTCACHE behavior"

* tag 'xfs-5.15-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (103 commits)
  xfs: fix I_DONTCACHE
  xfs: only set IOMAP_F_SHARED when providing a srcmap to a write
  xfs: fix perag structure refcounting error when scrub fails
  xfs: rename buffer cache index variable b_bn
  xfs: convert bp->b_bn references to xfs_buf_daddr()
  xfs: introduce xfs_buf_daddr()
  xfs: kill xfs_sb_version_has_v3inode()
  xfs: introduce xfs_sb_is_v5 helper
  xfs: remove unused xfs_sb_version_has wrappers
  xfs: convert xfs_sb_version_has checks to use mount features
  xfs: convert scrub to use mount-based feature checks
  xfs: open code sb verifier feature checks
  xfs: convert xfs_fs_geometry to use mount feature checks
  xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown
  xfs: convert remaining mount flags to state flags
  xfs: convert mount flags to features
  xfs: consolidate mount option features in m_features
  xfs: replace xfs_sb_version checks with feature flag checks
  xfs: reflect sb features in xfs_mount
  xfs: rework attr2 feature and mount options
  ...

Pull documentation updates from Jonathan Corbet:
 "Yet another set of documentation changes:

   - A reworking of PDF generation to yield better results for documents
     using CJK fonts in particular.

   - A new set of translations into traditional Chinese, a dialect for
     which I am assured there is a community of interested readers.

   - A lot more regular Chinese translation work as well.

  ... plus the usual assortment of updates, fixes, typo tweaks, etc"

* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
  docs: sphinx-requirements: Move sphinx_rtd_theme to top
  docs: pdfdocs: Enable language-specific font choice of zh_TW translations
  docs: pdfdocs: Teach xeCJK about character classes of quotation marks
  docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
  docs: pdfdocs: One-half spacing for CJK translations
  docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
  docs: pdfdocs: Preserve inter-phrase space in Korean translations
  docs: pdfdocs: Choose Serif font as CJK mainfont if possible
  docs: pdfdocs: Add CJK-language-specific font settings
  docs: pdfdocs: Refactor config for CJK document
  scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
  docs/zh_CN: Add zh_CN/accounting/psi.rst
  doc: align Italian translation
  Documentation/features/vm: riscv supports THP now
  docs/zh_CN: add infiniband user_verbs translation
  docs/zh_CN: add infiniband user_mad translation
  docs/zh_CN: add infiniband tag_matching translation
  docs/zh_CN: add infiniband sysfs translation
  docs/zh_CN: add infiniband opa_vnic translation
  docs/zh_CN: add infiniband ipoib translation
  ...

Pull printk updates from Petr Mladek:

 - Optionally, provide an index of possible printk messages via
   <debugfs>/printk/index/. It can be used when monitoring important
   kernel messages on a farm of various hosts. The monitor has to be
   updated when some messages has changed or are not longer available by
   a newly deployed kernel.

 - Add printk.console_no_auto_verbose boot parameter. It allows to
   generate crash dump even with slow consoles in a reasonable time
   frame.

 - Remove printk_safe buffers. The messages are always stored directly
   to the main logbuffer, even in NMI or recursive context. Also it
   allows to serialize syslog operations by a mutex instead of a spin
   lock.

 - Misc clean up and build fixes.

* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk/index: Fix -Wunused-function warning
  lib/nmi_backtrace: Serialize even messages about idle CPUs
  printk: Add printk.console_no_auto_verbose boot parameter
  printk: Remove console_silent()
  lib/test_scanf: Handle n_bits == 0 in random tests
  printk: syslog: close window between wait and read
  printk: convert @syslog_lock to mutex
  printk: remove NMI tracking
  printk: remove safe buffers
  printk: track/limit recursion
  lib/nmi_backtrace: explicitly serialize banner and regs
  printk: Move the printk() kerneldoc comment to its new home
  printk/index: Fix warning about missing prototypes
  MIPS/asm/printk: Fix build failure caused by printk
  printk: index: Add indexing support to dev_printk
  printk: Userspace format indexing support
  printk: Rework parse_prefix into printk_parse_prefix
  printk: Straighten out log_flags into printk_info_flags
  string_helpers: Escape double quotes in escape_special
  printk/console: Check consistent sequence number when handling race in console_unlock()

Pull devicetree updates from Rob Herring:

 - Refactor arch kdump DT related code to a common implementation

 - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight',
   'resets', and 'pwm' properties

 - Various clean-ups to DT FDT code

 - Fix a runtime error for !CONFIG_SYSFS

 - Convert Synopsys DW PCI and derivative binding docs to schemas. Add
   Toshiba Visconti PCIe binding.

 - Convert a bunch of memory controller bindings to schemas

 - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ
   combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq
   MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards,
   brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema.

 - Extend nvmem bindings to handle bit offsets in unit-addresses

 - Add DT schemas for HiKey 970 PCIe PHY

 - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings

 - Enable dtc pci_device_reg warning by default

 - Fixes for handling 'unevaluatedProperties' in preparation to enable
   pending support in the tooling for jsonschema 2020-12 draft

* tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  dt-bindings: display: remove zte,vou.txt binding doc
  dt-bindings: hwmon: merge max1619 into trivial devices
  dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible
  dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
  dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
  dt-bindings: Add vendor prefix for Topic Embedded Systems
  of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr()
  arm64: kdump: Remove custom linux,usable-memory-range handling
  arm64: kdump: Remove custom linux,elfcorehdr handling
  riscv: Remove non-standard linux,elfcorehdr handling
  of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef
  of: fdt: Add generic support for handling usable memory range property
  of: fdt: Add generic support for handling elf core headers property
  crash_dump: Make elfcorehdr address/size symbols always visible
  dt-bindings: memory: convert Samsung Exynos DMC to dtschema
  dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema
  dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema
  kbuild: Enable dtc 'pci_device_reg' warning by default
  dt-bindings: soc: remove obsolete zte zx header
  dt-bindings: clock: remove obsolete zte zx header
  ...

Pull m68knommu updates from Greg Ungerer:
 "A collection of fixes:

   -  flexcan platform support (for m5441x)

   -  fix CONFIG_ROMKERNEL linking

   -  fix compilation when CONFIG_ISA_DMA_API is set

   -  fix local ColdFire clk_enable() for NULL clk"

* tag 'm68knommu-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: only set CONFIG_ISA_DMA_API for ColdFire sub-arch
  m68k: coldfire: return success for clk_enable(NULL)
  m68k: m5441x: add flexcan support
  m68k: stmark2: update board setup
  m68k/nommu: prevent setting ROMKERNEL when ROM is not set

Merge tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - make Hyper-V code arch-agnostic (Michael Kelley)

 - fix sched_clock behaviour on Hyper-V (Ani Sinha)

 - fix a fault when Linux runs as the root partition on MSHV (Praveen
   Kumar)

 - fix VSS driver (Vitaly Kuznetsov)

 - cleanup (Sonia Sharma)

* tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer
  Drivers: hv: Enable Hyper-V code to be built on ARM64
  arm64: efi: Export screen_info
  arm64: hyperv: Initialize hypervisor on boot
  arm64: hyperv: Add panic handler
  arm64: hyperv: Add Hyper-V hypercall and register access utilities
  x86/hyperv: fix root partition faults when writing to VP assist page MSR
  hv: hyperv.h: Remove unused inline functions
  drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers
  x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0
  Drivers: hv: Move Hyper-V misc functionality to arch-neutral code
  Drivers: hv: Add arch independent default functions for some Hyper-V handlers
  Drivers: hv: Make portions of Hyper-V init code be arch neutral
  x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable
  asm-generic/hyperv: Add missing #include of nmi.h

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, the bulk of work in the SoC tree goes into DT files, this
  time with a roughly even split between 32-bit and 64-bit SoCs rather
  than the usual mostly 64-bit changes.

  New SoCs:

   - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
     platform based on the older SAMA5 series.

   - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
     phone SoCs.

   - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
     SoCs.

  New boards:

   - Marvell CN913x reference boards

   - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
     and Fuji server boards.

   - Snapdragon 665 based Sony Xperia 10II

   - Snapdragon MSM8916 based Xiaomi Redmi 2

   - Snapdragon MSM8226 based Samsung Galaxy S3 Neo

   - NXP i.MX based 32-bit boards:
       - DHCOM based PicoITX
       - DHSOM based DRC0ỉ
       - SolidRun SolidSense
       - SKOV i.MX6 boards.

   - NXP i.MX based 64-bit boards:
       - Nitrogen8 SoM and MNT Reform2
       - LS1088A based Traverse Ten64
       - i.MX8M based GW7902.

   - NVIDIA Jetson TX2 NX Developer Kit

   - 4KOpen STiH418-b2264 development board

   - ux500 based Samsung phones: Gavini, Codina and Kyle

   - TI AM335x based Sancloud BBE Lite

   - ixp4xx dts files to replace all old board files

  Other changes:

   - Treewide fixes for dtc warnings

   - Rockchips i/o domain support

   - TI OMAP/AM3 CPSW switch driver support

   - Improved device support for allwinner, aspeed, qualcomm, NXP,
     nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
     OMAP and actions"

* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
  arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
  ARM: dts: rockchip: Add SFC to RV1108
  arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
  ARM: dts: aspeed: p10bmc: Add power control pins
  ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
  ARM: dts: aspeed: minipack: Update flash partition table
  dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
  dt-bindings: vendor-prefixes: add Traverse Technologies
  arm64: dts: add device tree for Traverse Ten64 (LS1088A)
  arm64: dts: ls1088a: add missing PMU node
  arm64: dts: ls1088a: add internal PCS for DPMAC1 node
  ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
  ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
  ARM: dts: add SKOV imx6q and imx6dl based boards
  dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
  dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
  arm64: dts: imx8mq-reform2: add sound support
  arm64: dts: imx8m: drop interrupt-affinity for pmu
  arm64: dts: imx8qxp: update pmu compatible
  arm64: dts: imx8mm: update pmu compatible
  ...