- 29 Mar, 2024 3 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This last part is the continuation of Brent Lu's cleanups. Multiple quirks have been removed to use "default" configurations and ACPI-based detection of codecs and selection of topology files. This cleanup has been done in multiple steps/phases since Fall 2023, thanks Brent for this contribution!
-
Mark Brown authored
Merge series from Frank Li <Frank.Li@nxp.com>: Update binding doc to avoid warning.
-
Mark Brown authored
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>: Core for several drivers already sets the driver.owner, so driver does not need to. Simplify the drivers.
-
- 28 Mar, 2024 37 commits
-
-
Aleksandr Mishin authored
In kirkwood_dma_hw_params() mv_mbus_dram_info() returns NULL if CONFIG_PLAT_ORION macro is not defined. Fix this bug by adding NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bb6a40fc ("ASoC: kirkwood: Fix reference to PCM buffer address") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Link: https://msgid.link/r/20240328173337.21406-1-amishin@t-argos.ruSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Frank Li authored
Some sai only connect one direction dma (rx/tx) in SOC. For example: imx8qxp sai5 only connect tx dma channel. So allow only one "rx" or "tx" for dma-names. Remove description under dmas because no user use index to get dma channel. All user use 'dma-names' to get correct dma channel. dma-names already in 'required' list. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://msgid.link/r/20240328-asrc_8qxp-v8-3-801cd6bb5be2@nxp.comSigned-off-by:
-
Frank Li authored
fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms have 1 interrupt. Increase max interrupt number to 2 and add restriction for platforms except i.MX8QXP and i.MX8QM. Reviewed-by:
-
Frank Li authored
Add power-domains property for asrc and spdif since fsl,imx8qm-asrc/spdif and fsl,imx8qxp-asrc/spdif require 'power-domains'. Set 'power-domains' as required property for compatible string fsl,imx8qm-asrc/spdif and fsl,imx8qxp-asrc/spdif. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Brent Lu authored
Add the board config mtl_cs42l42_def to cs42l42 machine driver for all mtl boards using default SSP port allocation (headphone codec on SSP2, speaker amplifiers on SSP0, and BT offload on SSP1). Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240327162408.63953-19-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Brent Lu authored
Add the board config rpl_cs42l42_def to cs42l42 machine driver for all rpl boards using default SSP port allocation (headphone codec on SSP0, speaker amplifiers on SSP1, and BT offload on SSP2). Reviewed-by:
-
Brent Lu authored
Add a common entry in enumeration table for all cs42l42 boards with/without speaker amplifier. All other adl_cs42l42_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Introduce "adl_cs42l42_def" for adl boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
Add two common entries in enumeration table for all rt5682/rt5650 boards with/without speaker amplifier. All other mtl_rt5682_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add two common entries in enumeration table for all rt5682/rt5650 boards with/without speaker amplifier. All other rpl_rt5682_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add two common entries in enumeration table for all rt5682/rt5650 boards with/without speaker amplifier. All other adl_rt5682_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add a common entry in enumeration table for all rt5682 boards with/without speaker amplifier. All other tgl_rt5682_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add the board config mtl_nau8825_def to nau8825 machine driver for all mtl boards using default SSP port allocation (headphone codec on SSP2, speaker amplifiers on SSP0, and BT offload on SSP1). Reviewed-by:
-
Brent Lu authored
Add a common entry in enumeration table for all nau8825 boards with/without speaker amplifier. All other rpl_nau8825_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add a common entry in enumeration table for all nau8825 boards with/without speaker amplifier. All other adl_nau8825_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add new flags to tplg_quirk_mask to detect and append codec/amplifier tplg suffix to topology file name at runtime. With this feature we could implement an enumeration entry for all boards which implement same headphone codec regardless the speaker amplifier type. Reviewed-by:
-
Brent Lu authored
Add helper functions to get tplg suffix string for specific headphone codec or speaker amplifier. The string could be used to compose the default topology file name for specific headphone codec and speaker amplifier combination. Reviewed-by:
-
Brent Lu authored
Moving all code to snd-soc-acpi-intel-match module and remove the snd-soc-acpi-intel-ssp-common module. Reviewed-by:
-
Brent Lu authored
As we applied new naming convention to functions and structures, changing module name as well to reflect the new naming. Reviewed-by:
-
Brent Lu authored
As we moved ssp-common files to new locations with new names, changing the naming convention from sof_ssp_ to snd_soc_acpi_intel_. Reviewed-by:
-
Brent Lu authored
Moving ssp-common header file from sound/soc/intel/common directory to include/sound directory and rename the file. Keep file content unchanged for tracking purpose. Reviewed-by:
-
Brent Lu authored
Moving ssp-common source and header files from sound/soc/intel/boards directory to sound/soc/intel/common directory and rename the source file. Keep file content unchanged for tracking purpose. Reviewed-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
Krzysztof Kozlowski authored
Core in sdw_register_driver() already sets the .owner, so driver does not need to. Signed-off-by:
-
