- 19 May, 2022 1 commit
-
-
YueHaibing authored
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’: drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration] 276 | u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Move sysfs_gt_attribute_* macros out of #ifdef block to fix this. Fixes: 56a709cf ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220506032652.1856-1-yuehaibing@huawei.com (cherry picked from commit 09708b6d) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 11 May, 2022 2 commits
-
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
- Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - Devfreq clamp_to_idle fix - DPU: DSC (Display Stream Compression) support - DPU: inline rotation support on SC7280 - DPU: update DP timings to follow vendor recommendations - DP, DPU: add support for wide bus (on newer chipsets) - DP: eDP support - Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master component - MDSS: optionally reset the IP block at the bootup to drop bootloader state - Properly register and unregister internal bridges in the DRM framework - Complete DPU IRQ cleanup - DP: conversion to use drm_bridge and drm_bridge_connector - eDP: drop old eDP parts again - DPU: writeback support - Misc small fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull #2 for v5.19: Features and functionality: - Add first set of DG2 PCI IDs for "motherboard down" designs (Matt Roper) - Add initial RPL-P PCI IDs as ADL-P subplatform (Matt Atwood) Refactoring and cleanups: - Power well refactoring and cleanup (Imre) - GVT-g refactor and mdev API cleanup (Christoph, Jason, Zhi) - DPLL refactoring and cleanup (Ville) - VBT panel specific data parsing cleanup (Ville) - Use drm_mode_init() for on-stack modes (Ville) Fixes: - Fix PSR state pipe A/B confusion by clearing more state on disable (José) - Fix FIFO underruns caused by not taking DRAM channel into account (Vinod) - Fix FBC flicker on display 11+ by enabling a workaround (José) - Fix VBT seamless DRRS min refresh rate check (Ville) - Fix panel type assumption on bogus VBT data (Ville) - Fix panel data parsing for VBT that misses panel data pointers block (Ville) - Fix spurious AUX timeout/hotplug handling on LTTPR links (Imre) Merges: - Backmerge drm-next (Jani) - GVT changes (Jani) Signed-off-by:
-
- 07 May, 2022 3 commits
-
-
Dmitry Baryshkov authored
For the past several releases I have been assisting Rob by writing, collecting, testing and integrating patches for non-GPU and non-core parts of MSM DRM driver, while Rob is more interested in improving the GPU-related part. Let's note this in the MAINTAINERS file. While we are at it, per Rob's suggestion let's also promote Abhinav Kumar to M: (as he is actively working on the driver) and switch Sean Paul to R: (since he isn't doing much on msm these days). Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/20220429215324.3729441-1-dmitry.baryshkov@linaro.orgSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Dmitry Baryshkov authored
There is no need to check that kfree() argument is not NULL. Remove extra check and call kfree() unconditionally. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Rob Clark authored
Running the GPU without an IOMMU is not really a supported (or sane) configuration. Yet it can be useful during SoC bringup (ie. if the iommu driver doesn't work yet). Lets limit it to users who already have /dev/mem access, to avoid the chance that a user accidentially configures kernel without IOMMU support. Signed-off-by:
-
- 06 May, 2022 16 commits
-
-
Dmitry Baryshkov authored
Remove dividers that are not recommended for DSI DPHY mode when setting up the clock tree for the DSI pixel clock. Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/484333/ Link: https://lore.kernel.org/r/20220501195620.4135080-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Douglas Anderson authored
When rebooting on my sc7280-herobrine based device, I got a crash. Upon debugging, I found that I was in msm_drv_shutdown() and my "pdev" was the one associated with mdss_probe(). From source, I found that mdss_probe() has the line: platform_set_drvdata(pdev, mdss); ...where "mdss" is of type "struct msm_mdss *". Also from source, I saw that in msm_drv_shutdown() we have the line: struct msm_drm_private *priv = platform_get_drvdata(pdev); This is a mismatch and is the root of the problem. Further digging made it apparent that msm_drv_shutdown() is only supposed to be used for parts of the msm display framework that also call msm_drv_probe() but mdss_probe() doesn't call msm_drv_probe(). Let's remove the shutdown functon from msm_mdss.c. Digging a little further, code inspection found that two drivers that use msm_drv_probe() weren't calling msm_drv_shutdown(). Let's add it to them. Fixes: 6874f48b ("drm/msm: make mdp5/dpu devices master components") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/484975/ Link: https://lore.kernel.org/r/20220504163900.v2.1.Iaebd35e60160fc0f2a50fac3a0bf3b298c0637c8@changeidSigned-off-by:
-
Dan Carpenter authored
The msm_gem_prime_get_sg_table() needs to return error pointers on error. This is called from drm_gem_map_dma_buf() and returning a NULL will lead to a crash in that function. Fixes: ac451467 ("drm/msm: fix msm_gem_prime_get_sg_table()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Jessica Zhang authored
There is a possibility for mdp5_get_global_state to return -EDEADLK when acquiring the modeset lock, but currently global_state in mdp5_mixer_release doesn't check for if an error is returned. To avoid a NULL dereference error, let's have mdp5_mixer_release check if an error is returned and propagate that error. Reported-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Fixes: 7907a0d7 ("drm/msm/mdp5: Use the new private_obj state") Reviewed-by:
-
Jessica Zhang authored
mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring the modeset lock, but currently mdp5_pipe_release doesn't check for if an error is returned. Because of this, there is a possibility of mdp5_pipe_release hitting a NULL dereference error. To avoid this, let's have mdp5_pipe_release check if mdp5_get_global_state returns an error and propogate that error. Changes since v1: - Separated declaration and initialization of *new_state to avoid compiler warning - Fixed some spelling mistakes in commit message Changes since v2: - Return 0 in case where hwpipe is NULL as this is considered normal behavior - Added 2nd patch in series to fix a similar NULL dereference issue in mdp5_mixer_release Reported-by:
-
Kuogee Hsieh authored
Event thread supposed to exit from its while loop after kthread_stop(). However there may has possibility that event thread is pending in the middle of wait_event due to condition checking never become true. To make sure event thread exit its loop after kthread_stop(), this patch OR kthread_should_stop() into wait_event's condition checking so that event thread will exit its loop after kernal_stop(). Changes in v2: -- correct spelling error at commit title Changes in v3: -- remove unnecessary parenthesis -- while(1) to replace while (!kthread_should_stop()) Reported-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Dmitry Baryshkov authored
Correct a typo in the address of the second DSI PHY in the SDM660 device config. Fixes: 694dd304 ("drm/msm/dsi: Add phy configuration for SDM630/636/660") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/484697/ Link: https://lore.kernel.org/r/20220503204340.935532-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Konrad Dybcio authored
Due to MSM8998 support having been stuck in review for so long, another struct was added nearby, which confused git and resulted in the definitions not being sorted alphabetically. Fix it. Signed-off-by:
-
Vinod Polimera authored
If edp modeset init is failed due to panel being not ready and probe defers during drm bind, avoid clearing irqs and dereference hw_intr when hw_intr is null. BUG: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: dpu_core_irq_uninstall+0x50/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c msm_drm_bind+0x580/0x5fc try_to_bring_up_master+0x168/0x1c0 __component_add+0xb4/0x178 component_add+0x1c/0x28 dp_display_probe+0x38c/0x400 platform_probe+0xb0/0xd0 really_probe+0xcc/0x2c8 __driver_probe_device+0xbc/0xe8 driver_probe_device+0x48/0xf0 __device_attach_driver+0xa0/0xc8 bus_for_each_drv+0x8c/0xd8 __device_attach+0xc4/0x150 device_initial_probe+0x1c/0x28 Changes in V2: - Update commit message and coreect fixes tag. Fixes: f25f6566 ("drm/msm/dpu: merge struct dpu_irq into struct dpu_hw_intr") Signed-off-by:
Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by:
-
Dmitry Baryshkov authored
Move the initializer for the mode variable to the declaration point to remove unitialized variable access from the DEBUG_DPU macro. This fixes the following warning: drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c:250:37: note: initialize the variable 'mode' to silence this warning Fixes: d7d0e73f ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Reported-by:
-
Abhinav Kumar authored
Add missing break statement for dpu_hw_ctl_update_pending_flush_wb(). Otherwise this leads to below build warning. drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c:273:2: warning: unannotated fall-through between switch labels default: ^ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c:273:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Fixes: 6d084806 ("drm/msm/dpu: add changes to support writeback in hw_ctl") Reported-by: -
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.19' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.19 1. Add display support for MT8186 2. Miscellaneous refinement and fixup. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.19: UAPI Changes: Cross-subsystem Changes: Core Changes: - Add DRM-managed mutex initialisation - edid: Doc improvements - fbdev: deferred io improvements - format-helper: consolidate format conversion helpers - gem: Rework fence handling in drm_gem_plane_helper_prepare_fb Driver Changes: - ast: DisplayPort support, locking improvements - exynos: Revert conversion to devm_drm_of_get_bridge for DSI - mgag200: locking improvements - mxsfb: LCDIF CRC support - nouveau: switch to drm_gem_plane_helper_prepare_fb - rockchip: Refactor IOMMU initialisation, make some structures static, replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi, support swapped YUV formats, clock improvements, rk3568 support, VOP2 support - bridge: - adv7511: Enable CEC for ADV7535 - it6505: Send DPCD SET_POWER to monitor at disable - mcde_dsi: Revert conversion to devm_drm_of_get_bridge - tc358767: Fix for eDP and DP DT endpoint parsing - new bridge: i.MX8MP LDB - panel: - new panel: Startek KD070WVFPA043-C069A Signed-off-by: -
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2022-05-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Add kerneldoc for engine class enum (Matt Roper) - Add compute engine ABI (Matt Roper) Driver Changes: - Define GuC firmware version for DG2 (John Harrison) - Clear SET_PREDICATE_RESULT prior to executing the ring (Chris Wilson) - Fix race in __i915_vma_remove_closed (Karol Herbst) - Add register for compute engine's MMIO-based TLB invalidation (Matt Roper) - Xe_HP SDV and DG2 have up to 4 CCS engines (Daniele Ceraolo Spurio) - Add initial Ponte Vecchio definitions (Stuart Summers) - Document the eviction of the Flat-CCS objects (Ramalingam C) - Use existing uncore helper to read gpm_timestamp (Umesh Nerlige Ramappa) - Fix issue with LRI relative addressing (Akeem G Abodunrin) - Skip poisoning SET_PREDICATE_RESULT on dg2 (Chris Wilson) - Optimize the ccs_sz calculation per chunk (Ramalingam C) - Remove superfluous string helper include (Jani Nikula) - Fix assert in i915_ggtt_pin (Tvrtko Ursulin) - Use IOMEM_ERR_PTR() directly (Kefeng Wang) Signed-off-by:
-
git://git.pengutronix.de/pza/linuxDave Airlie authored
drm/imx: various cleanups - Use swap() instead of open-coding in ipu-image-convert. - Use devm_platform_ioremap_resource() helper in imx-tve. - Make static channel_offsets array const in ipu-dc. - Remove redundant zpos, color encoding and range initialization. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.19-2022-04-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-04-29: amdgpu - RAS updates - SI dpm deadlock fix - Misc code cleanups - HDCP fixes - PSR fixes - DSC fixes - SDMA doorbell cleanups - S0ix fix - DC FP fix - Zen dom0 regression fix for APUs - IP discovery updates - Initial SoC21 support - Support for new vbios tables - Runtime PM fixes - Add PSP TA debugfs interface amdkfd: - Misc code cleanups - Ignore bogus MEC signals more efficiently - SVM fixes - Use bitmap helpers radeon: - Misc code cleanups - Spelling/grammer fixes From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220429144853.5742-1-alexander.deucher@amd.com
-
- 05 May, 2022 18 commits
-
-
Ville Syrjälä authored
Make sure our choice of downclock mode respects the VBT seameless DRRS min refresh rate limit. v2: s/vrefesh/vrefresh/ (Jani) Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-10-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Extract the seamless DRRS min refresh rate from the VBT. v2: Do a version check Reviewed-by:
-
Ville Syrjälä authored
Make the panel type code a bit more abstract along the lines of the source of the panel type. For the moment we have three classes: OpRegion, VBT, fallback. Well introduce another one shortly. We can now also print out all the different panel types, and indicate which one we ultimately selected. Could help with debugging. v2: Add .get_panel_type() vfunc (Jani) Reviewed-by:
-
Ville Syrjälä authored
Pull the code to determine the panel type into its own set of sane functions. v2: rebase Reviewed-by:
-
Ville Syrjälä authored
Just assume panel_type==0 always if the VBT gives us bogus data. We actually already do this everywhere else except in parse_panel_options() since we just leave i915->vbt.panel_type zeroed. This also seems to be what Windows does. Reviewed-by:
-
Ville Syrjälä authored
Document the fact that struct lvds_lfp_data_entry can't be used directly and instead must be accessed via the data table pointers. Also remove the bogus comment implying that there might be a variable number of panel entries in the table. There are always exactly 16. Reviewed-by:
-
Ville Syrjälä authored
We need to start parsing stuff from the tail end of the LFP data block. This is made awkward by the fact that the fp_timing table has variable size. So we must use a bit more finesse to get the tail end, and to make sure we allocate enough memory for it to make sure our struct representation fits. v2: Rebase due to the preallocation of BDB blocks v3: Rebase due to min_size WARN relocation v4: Document BDB_LVDS_LFP_DATA vs. BDB_LVDS_LFP_DATA_PTRS order (Jani) Reviewed-by:
-
Ville Syrjälä authored
Modern VBTs no longer contain the LFP data table pointers block (41). We are expecting to have one in order to be able to parse the LFP data block (42), so let's make one up. Since the fp_timing table has variable size we must somehow determine its size. Rather than just hardcode it we look for the terminator bytes (0xffff) to figure out where each table entry starts. dvo_timing, panel_pnp_id, and panel_name are expected to have fixed size. This has been observed on various machines, eg. TGL with BDB version 240, CML with BDB version 231, etc. The most recent VBT I've observed that still had block 41 had BDB version 228. So presumably the cutoff (if an exact cutoff even exists) is somewhere around BDB version 229-231. v2: kfree the thing we allocated, not the thing+3 bytes v3: Do the debugprint only if we found the LFP data block v4: Fix t0 null check (Jani) Reviewed-by:
-
Ville Syrjälä authored
Reorder things so that we can parse the entier LFP data block in one go. For now we just stick to parsing the DTD from it. Also fix the misleading comment about block 42 being deprecated. Only the DTD part is deprecated, the rest is still very much needed. v2: Move the version check+comment into parse_generic_dtd() (Jani) Reviewed-by:
-
Ville Syrjälä authored
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Signed-off-by:
-
Christian König authored
We could need to wait for the pin to complete here. Signed-off-by:
Christian König <christian.koenig@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220429134230.24334-4-christian.koenig@amd.com
-
Javier Martinez Canillas authored
The Kernel Unit Testing (KUnit) framework provides a common framework for unit tests within the Linux kernel. Having a test suite would allow to identify regressions earlier. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220504080212.713275-1-javierm@redhat.com
-
Minghao Chi authored
Simplify the return expression. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Acked-by:
-
Thomas Zimmermann authored
Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index registers MGA1064_GEN_IO_DATA and MGA1064_GEN_IO_CTL. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) * add comment to explain rmmio_lock Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Acked-by:
-
Thomas Zimmermann authored
Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index register AST_IO_CRTC_PORT. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Add drmm_mutex_init(), a helper that provides managed mutex cleanup. The mutex will be destroyed with the final reference of the DRM device. Signed-off-by:
-
Thomas Zimmermann authored
Provide format-independent conversion helpers for system and I/O memory. Implement most existing helpers on top of it. The source and destination formats of each conversion is handled by a per-line helper that is given to the generic implementation. v2: * remove a blank line Signed-off-by:
-
Thomas Zimmermann authored
Give each per-line conversion helper pointers of type void and the number of pixels in the line. Remove the unused swab parameters. Signed-off-by:
-
