- 17 Sep, 2019 40 commits
-
-
Thinh Nguyen authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 56175929 ] If the device rejects the control transfer to enable device-initiated U1/U2 entry, then the device will not initiate U1/U2 transition. To improve the performance, the downstream port should not initate transition to U1/U2 to avoid the delay from the device link command response (no packet can be transmitted while waiting for a response from the device). If the device has some quirks and does not implement U1/U2, it may reject all the link state change requests, and the downstream port may resend and flood the bus with more requests. This will affect the device performance even further. This patch disables the hub-initated U1/U2 if the device-initiated U1/U2 entry fails. Reference: USB 3.2 spec 7.2.4.2.3 Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Peter Ujfalusi authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 7ad9db66 ] In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.comSigned-off-by:
-
Paul Menzel authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 3b2d4dcf ] Since commit 10a68cdf (nfsd: fix performance-limiting session calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with 1 TB of memory cannot be mounted anymore. The mount just hangs on the client. The gist of commit 10a68cdf is the change below. -avail = clamp_t(int, avail, slotsize, avail/3); +avail = clamp_t(int, avail, slotsize, total_avail/3); Here are the macros. #define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <) #define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi) `total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts the values to `int`, which for 32-bit integers can only hold values −2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1). `avail` (in the function signature) is just 65536, so that no overflow was happening. Before the commit the assignment would result in 21845, and `num = 4`. When using `total_avail`, it is causing the assignment to be 18446744072226137429 (printed as %lu), and `num` is then 4164608182. My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the server thinks there is no memory available any more for this client. Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long` fixes the issue. Now, `avail = 65536` (before commit 10a68cdf `avail = 21845`), but `num = 4` remains the same. Fixes: c54f24e3 (nfsd: fix performance-limiting session calculation) Cc: stable@vger.kernel.org Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit c54f24e3 ] We're unintentionally limiting the number of slots per nfsv4.1 session to 10. Often more than 10 simultaneous RPCs are needed for the best performance. This calculation was meant to prevent any one client from using up more than a third of the limit we set for total memory use across all clients and sessions. Instead, it's limiting the client to a third of the maximum for a single session. Fix this. Reported-by:
Chris Tracy <ctracy@engr.scu.edu> Cc: stable@vger.kernel.org Fixes: de766e57 "nfsd: give out fewer session slots as limit approaches" Signed-off-by:
-
J. Bruce Fields authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit de766e57 ] Instead of granting client's full requests until we hit our DRC size limit and then failing CREATE_SESSIONs (and hence mounts) completely, start granting clients smaller slot tables as we approach the limit. The factor chosen here is pretty much arbitrary. Signed-off-by:
-
J. Bruce Fields authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 44d8660d ] An NFSv4.1+ client negotiates the size of its duplicate reply cache size in the initial CREATE_SESSION request. The server preallocates the memory for the duplicate reply cache to ensure that we'll never fail to record the response to a nonidempotent operation. To prevent a few CREATE_SESSIONs from consuming all of memory we set an upper limit based on nr_free_buffer_pages(). 1/2^10 has been too limiting in practice; 1/2^7 is still less than one percent. Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 8fd1ab74 ] If the server that does not implement NFSv4.1 persistent session semantics reboots while we are performing an exclusive create, then the return value of NFS4ERR_DELAY when we replay the open during the grace period causes us to lose the verifier. When the grace period expires, and we present a new verifier, the server will then correctly reply NFS4ERR_EXIST. This commit ensures that we always present the same verifier when replaying the OPEN. Reported-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 9bd2bbc0 upstream. gcc 7.1 reports the following warning: block/elevator.c: In function ‘elv_register’: block/elevator.c:898:5: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] "%s_io_cq", e->elevator_name); ^~~~~~~~~~ block/elevator.c:897:3: note: ‘snprintf’ output between 7 and 22 bytes into a destination of size 21 snprintf(e->icq_cache_name, sizeof(e->icq_cache_name), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s_io_cq", e->elevator_name); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The bug is that the name of the icq_cache is 6 characters longer than the elevator name, but only ELV_NAME_MAX + 5 characters were reserved for it --- so in the case of a maximum-length elevator name, the 'q' character in "_io_cq" would be truncated by snprintf(). Fix it by reserving ELV_NAME_MAX + 6 characters instead. Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 2446a68a ] Don't cache eth dest pointer before calling pskb_may_pull. Fixes: cf0f02d0 ("[BRIDGE]: use llc for receiving STP packets") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 3b26a5d0 ] We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may call pskb_may_pull afterwards and end up using a stale pointer. So use the header directly, it's just 1 place where it's needed. Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Signed-off-by:
Martin Weinelt <martin@linuxlounge.net> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit e57f6185 ] We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 9d1bc24b ] bond_xmit_roundrobin() checks for IGMP packets but it parses the IP header even before checking skb->protocol. We should validate the IP header with pskb_may_pull() before using iph->protocol. Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com Fixes: a2fd940f ("bonding: fix broken multicast with round-robin mode") Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit e858faf5 ] If an app is playing tricks to reuse a socket via tcp_disconnect(), bytes_acked/received needs to be reset to 0. Otherwise tcp_info will report the sum of the current and the old connection.. Cc: Eric Dumazet <edumazet@google.com> Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info") Fixes: bdd1f9ed ("tcp: add tcpi_bytes_received to tcp_info") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 4638faac ] sock_efree() releases the sock refcnt, if we don't hold this refcnt when setting skb->destructor to it, the refcnt would not be balanced. This leads to several bug reports from syzbot. I have checked other users of sock_efree(), all of them hold the sock refcnt. Fixes: c8c8218e ("netrom: fix a memory leak in nr_rx_frame()") Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit c8c8218e ] When the skb is associated with a new sock, just assigning it to skb->sk is not sufficient, we have to set its destructor to free the sock properly too. Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit a261e379 ] The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496Reported-and-tested-by:
Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Yang Wei authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit dd006fc4 ] The frags_q is not properly initialized, it may result in illegal memory access when conn_info is NULL. The "goto free_exit" should be replaced by "goto exit". Signed-off-by:
Yang Wei <albin_yang@163.com> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 071c3798 ] Neigh timer can be scheduled multiple times from userspace adding multiple neigh entries and forcing the neigh timer scheduling passing NTF_USE in the netlink requests. This will result in a refcount leak and in the following dump stack: [ 32.465295] NEIGH: BUG, double timer add, state is 8 [ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65 [ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 32.465313] Call Trace: [ 32.465318] dump_stack+0x7c/0xc0 [ 32.465323] __neigh_event_send+0x20c/0x880 [ 32.465326] ? ___neigh_create+0x846/0xfb0 [ 32.465329] ? neigh_lookup+0x2a9/0x410 [ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800 [ 32.465334] neigh_add+0x4f8/0x5e0 [ 32.465337] ? neigh_xmit+0x620/0x620 [ 32.465341] ? find_held_lock+0x85/0xa0 [ 32.465345] rtnetlink_rcv_msg+0x204/0x570 [ 32.465348] ? rtnl_dellink+0x450/0x450 [ 32.465351] ? mark_held_locks+0x90/0x90 [ 32.465354] ? match_held_lock+0x1b/0x230 [ 32.465357] netlink_rcv_skb+0xc4/0x1d0 [ 32.465360] ? rtnl_dellink+0x450/0x450 [ 32.465363] ? netlink_ack+0x420/0x420 [ 32.465366] ? netlink_deliver_tap+0x115/0x560 [ 32.465369] ? __alloc_skb+0xc9/0x2f0 [ 32.465372] netlink_unicast+0x270/0x330 [ 32.465375] ? netlink_attachskb+0x2f0/0x2f0 [ 32.465378] netlink_sendmsg+0x34f/0x5a0 [ 32.465381] ? netlink_unicast+0x330/0x330 [ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20 [ 32.465388] ? netlink_unicast+0x330/0x330 [ 32.465391] sock_sendmsg+0x91/0xa0 [ 32.465394] ___sys_sendmsg+0x407/0x480 [ 32.465397] ? copy_msghdr_from_user+0x200/0x200 [ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40 [ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250 [ 32.465407] ? __wake_up_common_lock+0xcb/0x110 [ 32.465410] ? __wake_up_common+0x230/0x230 [ 32.465413] ? netlink_bind+0x3e1/0x490 [ 32.465416] ? netlink_setsockopt+0x540/0x540 [ 32.465420] ? __fget_light+0x9c/0xf0 [ 32.465423] ? sockfd_lookup_light+0x8c/0xb0 [ 32.465426] __sys_sendmsg+0xa5/0x110 [ 32.465429] ? __ia32_sys_shutdown+0x30/0x30 [ 32.465432] ? __fd_install+0xe1/0x2c0 [ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100 [ 32.465438] ? mark_held_locks+0x24/0x90 [ 32.465441] ? do_syscall_64+0xf/0x270 [ 32.465444] do_syscall_64+0x63/0x270 [ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER' receiving a netlink request with NTF_USE flag set Reported-by:
Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d30 ("neigh: Allow for user space users of the neighbour table") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Justin Chen authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 35cbef98 ] Currently we silently ignore filters if we cannot meet the filter requirements. This will lead to the MAC dropping packets that are expected to pass. A better solution would be to set the NIC to promisc mode when the required filters cannot be met. Also correct the number of MDF filters supported. It should be 17, not 16. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Matteo Croce authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 2e605463 ] Avoid the situation where an IPV6 only flag is applied to an IPv4 address: # ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global noprefixroute dummy0 valid_lft forever preferred_lft forever Or worse, by sending a malicious netlink command: # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0 valid_lft forever preferred_lft forever Signed-off-by:
Matteo Croce <mcroce@redhat.com> Reviewed-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit fdd258d4 ] cfhsi_exit_module() calls unregister_netdev() under rtnl_lock(). but unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: c4125400 ("caif-hsi: Add rtnl support") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Brian King authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit ea811b79 ] This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Junxiao Bi authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit bd293d07 upstream. When thin-volume is built on loop device, if available memory is low, the following deadlock can be triggered: One process P1 allocates memory with GFP_FS flag, direct alloc fails, memory reclaim invokes memory shrinker in dm_bufio, dm_bufio_shrink_scan() runs, mutex dm_bufio_client->lock is acquired, then P1 waits for dm_buffer IO to complete in __try_evict_buffer(). But this IO may never complete if issued to an underlying loop device that forwards it using direct-IO, which allocates memory using GFP_KERNEL (see: do_blockdev_direct_IO()). If allocation fails, memory reclaim will invoke memory shrinker in dm_bufio, dm_bufio_shrink_scan() will be invoked, and since the mutex is already held by P1 the loop thread will hang, and IO will never complete. Resulting in ABBA deadlock. Cc: stable@vger.kernel.org Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Lee, Chiasheng authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit e244c469 upstream. With Link Power Management (LPM) enabled USB3 links transition to low power U1/U2 link states from U0 state automatically. Current hub code detects USB3 remote wakeups by checking if the software state still shows suspended, but the link has transitioned from suspended U3 to enabled U0 state. As it takes some time before the hub thread reads the port link state after a USB3 wake notification, the link may have transitioned from U0 to U1/U2, and wake is not detected by hub code. Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup handling This patch should be added to stable kernels since 4.13 where LPM was kept enabled during suspend/resume Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by:
Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Szymon Janc authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 1d87b88b upstream. Microsoft Surface Precision Mouse provides bogus identity address when pairing. It connects with Static Random address but provides Public Address in SMP Identity Address Information PDU. Address has same value but type is different. Workaround this by dropping IRK if ID address discrepancy is detected. > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 75 Role: Master (0x00) Peer address type: Random (0x01) Peer address: E0:52:33:93:3B:21 (Static) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 .... > ACL Data RX: Handle 75 flags 0x02 dlen 12 SMP: Identity Address Information (0x09) len 7 Address type: Public (0x00) Address: E0:52:33:93:3B:21 Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Tested-by:
Maarten Fonville <maarten.fonville@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199461 Cc: stable@vger.kernel.org Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 918b8646 upstream. Commit 4e0eaf23 ("intel_th: msu: Fix single mode with IOMMU") switched the single mode code to use dma mapping pages obtained from the page allocator, but with IOMMU disabled, that may lead to using SWIOTLB bounce buffers and without additional sync'ing, produces empty trace buffers. Fix this by using a DMA32 GFP flag to the page allocation in single mode, as the device supports full 32-bit DMA addressing. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 4e0eaf23 ("intel_th: msu: Fix single mode with IOMMU") Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by:
Ammy Yi <ammy.yi@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190621161930.60785-4-alexander.shishkin@linux.intel.comSigned-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 0bdf8a82 upstream. ECRYPTFS_SIZE_AND_MARKER_BYTES is type size_t, so if "rc" is negative that gets type promoted to a high positive value and treated as success. Fixes: 778aeb42 ("eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [tyhicks: Use "if/else if" rather than "if/if"] Cc: stable@vger.kernel.org Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Ravi Bangoria authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit f474c28f upstream. powerpc hardware triggers watchpoint before executing the instruction. To make trigger-after-execute behavior, kernel emulates the instruction. If the instruction is 'load something into non-volatile register', exception handler should restore emulated register state while returning back, otherwise there will be register state corruption. eg, adding a watchpoint on a list can corrput the list: # cat /proc/kallsyms | grep kthread_create_list c00000000121c8b8 d kthread_create_list Add watchpoint on kthread_create_list->prev: # perf record -e mem:0xc00000000121c8c0 Run some workload such that new kthread gets invoked. eg, I just logged out from console: list_add corruption. next->prev should be prev (c000000001214e00), \ but was c00000000121c8b8. (next=c00000000121c8b8). WARNING: CPU: 59 PID: 309 at lib/list_debug.c:25 __list_add_valid+0xb4/0xc0 CPU: 59 PID: 309 Comm: kworker/59:0 Kdump: loaded Not tainted 5.1.0-rc7+ #69 ... NIP __list_add_valid+0xb4/0xc0 LR __list_add_valid+0xb0/0xc0 Call Trace: __list_add_valid+0xb0/0xc0 (unreliable) __kthread_create_on_node+0xe0/0x260 kthread_create_on_node+0x34/0x50 create_worker+0xe8/0x260 worker_thread+0x444/0x560 kthread+0x160/0x1a0 ret_from_kernel_thread+0x5c/0x70 List corruption happened because it uses 'load into non-volatile register' instruction: Snippet from __kthread_create_on_node: c000000000136be8: addis r29,r2,-19 c000000000136bec: ld r29,31424(r29) if (!__list_add_valid(new, prev, next)) c000000000136bf0: mr r3,r30 c000000000136bf4: mr r5,r28 c000000000136bf8: mr r4,r29 c000000000136bfc: bl c00000000059a2f8 <__list_add_valid+0x8> Register state from WARN_ON(): GPR00: c00000000059a3a0 c000007ff23afb50 c000000001344e00 0000000000000075 GPR04: 0000000000000000 0000000000000000 0000001852af8bc1 0000000000000000 GPR08: 0000000000000001 0000000000000007 0000000000000006 00000000000004aa GPR12: 0000000000000000 c000007ffffeb080 c000000000137038 c000005ff62aaa00 GPR16: 0000000000000000 0000000000000000 c000007fffbe7600 c000007fffbe7370 GPR20: c000007fffbe7320 c000007fffbe7300 c000000001373a00 0000000000000000 GPR24: fffffffffffffef7 c00000000012e320 c000007ff23afcb0 c000000000cb8628 GPR28: c00000000121c8b8 c000000001214e00 c000007fef5b17e8 c000007fef5b17c0 Watchpoint hit at 0xc000000000136bec. addis r29,r2,-19 => r29 = 0xc000000001344e00 + (-19 << 16) => r29 = 0xc000000001214e00 ld r29,31424(r29) => r29 = *(0xc000000001214e00 + 31424) => r29 = *(0xc00000000121c8c0) 0xc00000000121c8c0 is where we placed a watchpoint and thus this instruction was emulated by emulate_step. But because handle_dabr_fault did not restore emulated register state, r29 still contains stale value in above register state. Fixes: 5aae8a53 ("powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors") Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: stable@vger.kernel.org # 2.6.36+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 6ecb78ef upstream. Previously, only IBAT1 and IBAT2 were used to map kernel linear mem. Since commit 63b2bc61 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX"), we may have all 8 BATs used for mapping kernel text. But the suspend/restore functions only save/restore BATs 0 to 3, and clears BATs 4 to 7. Make suspend and restore functions respectively save and reload the 8 BATs on CPUs having MMU_FTR_USE_HIGH_BATS feature. Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Helge Deller authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 10835c85 upstream. On parisc the privilege level of a process is stored in the lowest two bits of the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0 for the kernel and privilege level 3 for user-space. So userspace should not be allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege level to e.g. 0 to try to gain kernel privileges. This patch prevents such modifications by always setting the two lowest bits to one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are modified via ptrace calls in the native and compat ptrace paths. Link: https://bugs.gentoo.org/481768Reported-by:
Jeroen Roovers <jer@gentoo.org> Cc: <stable@vger.kernel.org> Tested-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Steve Longerbeam authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 3d1f62c6 upstream. The saturation bit was being set at bit 9 in the second 32-bit word of the TPMEM CSC. This isn't correct, the saturation bit is bit 42, which is bit 10 of the second word. Fixes: 1aa8ea0d ("gpu: ipu-v3: Add Image Converter unit") Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Harkes authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 7fa0a1da upstream. Patch series "Coda updates". The following patch series is a collection of various fixes for Coda, most of which were collected from linux-fsdevel or linux-kernel but which have as yet not found their way upstream. This patch (of 22): Various file systems expect that vma->vm_file points at their own file handle, several use file_inode(vma->vm_file) to get at their inode or use vma->vm_file->private_data. However the way Coda wrapped mmap on a host file broke this assumption, vm_file was still pointing at the Coda file and the host file systems would scribble over Coda's inode and private file data. This patch fixes the incorrect expectation and wraps vm_ops->open and vm_ops->close to allow Coda to track when the vm_area_struct is destroyed so we still release the reference on the Coda file handle at the right time. [This patch differs from the original upstream patch because older stable kernels do not have the call_mmap vfs helper so we call f_ops->mmap directly.] Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Denis Efremov authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 9b04609b ] This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
Denis Efremov <efremov@ispras.ru> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Denis Efremov authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 5635f897 ] This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1840081 [ Upstream commit 229b53c9 ] all other drivers recognizing those ioctls are very much *not* biarch. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mika Westerberg authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 000dd531 upstream. PME polling does not take into account that a device that is directly connected to the host bridge may go into D3cold as well. This leads to a situation where the PME poll thread reads from a config space of a device that is in D3cold and gets incorrect information because the config space is not accessible. Here is an example from Intel Ice Lake system where two PCIe root ports are in D3cold (I've instrumented the kernel to log the PMCSR register contents): [ 62.971442] pcieport 0000:00:07.1: Check PME status, PMCSR=0xffff [ 62.971504] pcieport 0000:00:07.0: Check PME status, PMCSR=0xffff Since 0xffff is interpreted so that PME is pending, the root ports will be runtime resumed. This repeats over and over again essentially blocking all runtime power management. Prevent this from happening by checking whether the device is in D3cold before its PME status is read. Fixes: 71a83bd7 ("PCI/PM: add runtime PM support to PCIe port") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Lukas Wunner <lukas@wunner.de> Cc: 3.6+ <stable@vger.kernel.org> # v3.6+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit d4548543 upstream. KASAN report this: BUG: unable to handle kernel paging request at ffffffffa0097000 PGD 3870067 P4D 3870067 PUD 3871063 PMD 2326e2067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 5340 Comm: modprobe Not tainted 5.1.0-rc7+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_add_valid+0x10/0x70 Code: c3 48 8b 06 55 48 89 e5 5d 48 39 07 0f 94 c0 0f b6 c0 c3 90 90 90 90 90 90 90 55 48 89 d0 48 8b 52 08 48 89 e5 48 39 f2 75 19 <48> 8b 32 48 39 f0 75 3a RSP: 0018:ffffc90000e23c68 EFLAGS: 00010246 RAX: ffffffffa00ad000 RBX: ffffffffa009d000 RCX: 0000000000000000 RDX: ffffffffa0097000 RSI: ffffffffa0097000 RDI: ffffffffa009d000 RBP: ffffc90000e23c68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0097000 R13: ffff888231797180 R14: 0000000000000000 R15: ffffc90000e23e78 FS: 00007fb215285540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0097000 CR3: 000000022f144000 CR4: 00000000000006f0 Call Trace: v9fs_register_trans+0x2f/0x60 [9pnet ? 0xffffffffa0087000 p9_virtio_init+0x25/0x1000 [9pnet_virtio do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb214d8e839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 RSP: 002b:00007ffc96554278 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055e67eed2aa0 RCX: 00007fb214d8e839 RDX: 0000000000000000 RSI: 000055e67ce95c2e RDI: 0000000000000003 RBP: 000055e67ce95c2e R08: 0000000000000000 R09: 000055e67eed2aa0 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 000055e67eeda500 R14: 0000000000040000 R15: 000055e67eed2aa0 Modules linked in: 9pnet_virtio(+) 9pnet gre rfkill vmw_vsock_virtio_transport_common vsock [last unloaded: 9pnet_virtio CR2: ffffffffa0097000 ---[ end trace 4a52bb13ff07b761 If register_virtio_driver() fails in p9_virtio_init, we should call v9fs_unregister_trans() to do cleanup. Link: http://lkml.kernel.org/r/20190430115942.41840-1-yuehaibing@huawei.com Cc: stable@vger.kernel.org Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: b530cc79 ("9p: add virtio transport") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Daniel Jordan authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit cf144f81 upstream. Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ #16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295bec ("padata: Generic parallelization/serialization interface") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: <stable@vger.kernel.org> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Lyude Paul authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 7cb95eee upstream. It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by:
Lyude Paul <lyude@redhat.com> Tested-by:
Marc Meledandri <m.meledandri@gmail.com> Fixes: 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Like Xu authored
BugLink: https://bugs.launchpad.net/bugs/1840081 commit 6fc3977c upstream. If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
