- 14 Nov, 2016 37 commits
-
-
Ben Evans authored
Put IT_* definitions into an enum, as they're sent over the wire, adjust calls, print statements, etc. to use the new enum. Signed-off-by:
Ben Evans <bevans@cray.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6746 Reviewed-on: http://review.whamcloud.com/16228Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
James Simmons <uja.ornl@yahoo.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andreas Dilger authored
Improve the error messages related to DFID output and parsing for usage in userspace. Signed-off-by:
Andreas Dilger <andreas.dilger@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1606 Reviewed-on: http://review.whamcloud.com/6156Reviewed-by:
Frank Zago <fzago@cray.com> Reviewed-by:
-
Oleg Drokin authored
osc_ast_guard has been removed by the clio simplification. Remove the last lock class definition. Signed-off-by:
Bobi Jam <bobijam@hotmail.com> Signed-off-by:
-
Andreas Dilger authored
Remove unused file attribute flag LUSTRE_BFLAG_UNCOMMITTED_WRITES that was used internally on the client at one point. Add flags from the kernel which may be useful in the near future. Signed-off-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
wangdi <di.wang@intel.com> Reviewed-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by:
-
wang di authored
Do not lookup master inode by ilookup5, instead it should use ilookup5_nowait, otherwise it will cause dead lock, 1. Client1 send chmod req to the MDT0, then on MDT0, it enqueues master and all of its slaves lock, (mdt_attr_set() ->mdt_lock_slaves()), after gets master and stripe0 lock, it will send the enqueue request(for stripe1) to MDT1, then MDT1 finds the lock has been granted to client2. Then MDT1 sends blocking ast to client2. 2. At the same time, client2 tries to unlink the striped dir (rm -rf striped_dir), and during lookup, it will hold the master inode of the striped directory, whose inode state is NEW, then tries to revalidate all of its slaves, (ll_prep_inode()->ll_iget()->ll_read_inode2()-> ll_update_inode().). And it will be blocked on the server side because of 1. 3. Then the client get the blocking_ast request, cancel the lock, but being blocked by ilookup5 in ll_md_blocking_ast(), because the inode state is still NEW. Signed-off-by:
Lai Siyao <lai.siyao@intel.com> Reviewed-by:
-
Alexander Boyko authored
Fix: 5c689e68 ("staging/lustre/ptlrpc: race at req processing") decreased the race window, but does not remove it. Disable rq_resend right after MSG_REPLAY flag set. Import lock protects two threads from race between set/clear MSG_REPLAY and rq_resend flags. Signed-off-by:
Alexander Boyko <alexander_boyko@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5554 Xyratex-bug-id: MRP-1888 Reviewed-on: http://review.whamcloud.com/10735Reviewed-by:
Niu Yawei <yawei.niu@intel.com> Reviewed-by:
Mike Pershin <mike.pershin@intel.com> Reviewed-by:
-
Henri Doreau authored
Do not release nrs_lock in nrs_policy_stop0 to prevent op_policy_stop() from being executed concurrently. Signed-off-by:
Henri Doreau <henri.doreau@cea.fr> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7096 Reviewed-on: http://review.whamcloud.com/16214Reviewed-by:
Emoly Liu <emoly.liu@intel.com> Reviewed-by:
-
Jinshan Xiong authored
To avoid a race that osc_extent and osc_object destroy happens on the same time, which causes kernel crash. Signed-off-by:
Patrick Farrell <paf@cray.com> Reviewed-by:
-
wang di authored
If ll_iget fails during inode initialization, especially during striped directory lookup after creation failed, then it should clear stripe MD before make_bad_inode(), because make_bad_inode() will reset the i_mode, which can cause ll_clear_inode() skip freeing those stripe MD. Signed-off-by:
-
wang di authored
If clients or other targets can not get IR config lock or lock, the mount should continue, instead of failing. Because timeout mechanism will handle the recovery anyway. Signed-off-by:
-
John L. Hammond authored
In ldlm_expired_completion_wait() remove the useless LCONSOLE_WARN() message and upgrade the LDLM_DEBUG() statement to LDLM_ERROR(). Signed-off-by:
Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by:
-
Hongchao Zhang authored
At client side, the replay cursor using to speed up the lookup of committed open requests in its obd_import should be resetted for normal connection (not reconnection) during recovery. Signed-off-by:
Hongchao Zhang <hongchao.zhang@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6802 Reviewed-on: http://review.whamcloud.com/17351Reviewed-by:
-
Hiroya Nozaki authored
Because of a implementation of generic_perform_write(), write(2) may return 0 with no errno even if EDQUOT or ENOSPC actually happened in it. This patch fixes the issue with setting a proper errno to ci_result. Signed-off-by:
Hiroya Nozaki <nozaki.hiroya@jp.fujitsu.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6732 Reviewed-on: http://review.whamcloud.com/15302Reviewed-by:
-
Andreas Dilger authored
In some cases with a very long pathname, such as with sanity.sh test_154c, mdc_ioc_fid2path() would spew long debug messages to the log, because libcfs_debug_vmsg2() refuses to log messages over one page in size. Truncate the debug message to only log the last 512 characters of the pathname, which is sufficient for most debugging, saves a bit of space in the debug log, and will prevent the debug logging from printing to the console in the first place. Signed-off-by:
Jian Yu <jian.yu@intel.com> Reviewed-by:
-
John L. Hammond authored
The reference copytool cannot handle migration of HSM archive files. In the MDT migration path check for HSM attributes and fail if they are present. In the LMV layer allow creation of volatile files with any MDT index. Add a test to sanity-hsm to ensure that attempting to migrate an HSM archive file is handled safely. Signed-off-by:
-
Andrew Wellington authored
SELinux contexts are applied by the kernel if mount options are not binary. As we don't use any binary mount options in Lustre, remove the binary mount option flag. Signed-off-by:
Andrew Wellington <andrew.wellington@anu.edu.au> Signed-off-by:
Sebastien Buisson <sebastien.buisson@bull.net> Reviewed-by:
-
Jinshan Xiong authored
After range lock is introduced to Lustre, it's possible for multiple threads to submit osc_extents with partial pages, and finally I/O engine may try to merge these extents, which will end up with assert in osc_build_rpc(). In this patch, osc_extent::oe_no_merge is introduced, and this flag is set if osc_extent submitted via osc_io_submit() includes partial pages. This flag is used by I/O engine to stop merging this kind of extents. Signed-off-by:
-
Lai Siyao authored
During statahead file may be recreated, though this is rare case, current code will leak the lock, this patch will release lock in this case. Signed-off-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
-
Gregoire Pichon authored
The OSC tunable max_dirty_mb must be set to a value strictly lower than 2048, as it is assumed by OSS in ofd_grant_alloc() routine. Signed-off-by:
Gregoire Pichon <gregoire.pichon@bull.net> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7218 Reviewed-on: http://review.whamcloud.com/16652Reviewed-by:
-
Arnd Bergmann authored
James Simmons reports: > The ldlm_pool field pl_recalc_time is set to the current > monotonic clock value but the interval period is calculated > with the wall clock. This means the interval period will > always be far larger than the pl_recalc_period, which is > just a small interval time period. The correct thing to > do is to use monotomic clock current value instead of the > wall clocks value when calculating recalc_interval_sec. This broke when I converted the 32-bit get_seconds() into ktime_get_{real_,}seconds() inconsistently. Either one of those two would have worked, but mixing them does not. Staying with the original intention of the patch, this changes the ktime_get_seconds() calls into ktime_get_real_seconds(), using real time instead of mononic time. Cc: stable@vger.kernel.org # v4.4+ Fixes: 8f83409c ("staging/lustre: use 64-bit time for pl_recalc") Reported-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Dan Carpenter authored
We accidentally removed a tab here. Let's add it back, and some curly braces as well since this is a muti-line indent. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Bobi Jam authored
When lu_object_alloc() reaches to LOV object init, we need initialize its stripe type beforehand, so that if something wrong in the conf buffer, the object chain need to be traversed to free what has been allocated, with LOV object type be set as LLT_EMPTY, and when the LOV part is reached, it won't panic without knowing what stripe type it is. This patch also improves debug messages in lsm_unpackmd_common(), and does not return error if the LOV device is still processing config log while trying to verify a layout buffer. Signed-off-by:
Bobi Jam <bobijam.xu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6744 Reviewed-on: http://review.whamcloud.com/15362Reviewed-by:
-
John L. Hammond authored
In lsm_alloc_plain() use a signed loop index to avoid an infinite loop in the error path. Signed-off-by:
-
Shiva Kerdel authored
Follow the kernel type preferrences of using 's32' over 'int32_t'. Signed-off-by:
Shiva Kerdel <shiva@exdev.nl> Acked-by:
Stuart Yoder <stuart.yoder@nxp.com> Signed-off-by:
-
Shiva Kerdel authored
Follow the kernel type preferrences of using 's16' over 'int16_t'. Signed-off-by:
-
Punit Vara authored
Replace all occurences of (1<<x) by BIT(x) in the file ks7010_sdio.h to get rid of checkpatch.pl "CHECK" output "Prefer using BIT macro". Signed-off-by:
Punit Vara <punitvara@gmail.com> Signed-off-by:
-
Daeseok Youn authored
Re-arrange the functions for removing forward declarations in dgnc_driver.c Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit d4ef1313. It's wrong :( Reported-by:
-
Sergio Paracuellos authored
This patch replace actual mask stuff using BIT macros with or operators to make use of GENMASK macro which simplifies code clearity and readibility. It applies for defines included in hfa384x.h header file. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
This patch replace actual mask stuff using BIT macros with or operators to make use of GENMASK macro which simplifies code clearity and readibility. It applies for defines included in p80211hdr.h header file. Signed-off-by:
-
Sergio Paracuellos authored
This patch replace actual mask stuff using BIT macros with or operators to make use of GENMASK macro which simplifies code clearity and readibility. It applies for defines included in p80211netdev.h header file. Signed-off-by:
-
Sergio Paracuellos authored
This patch replace actual mask stuff using BIT macros with or operators to make use of GENMASK macro which simplifies code clearity and readibility. It applies for two bitwise operations included in prism2sta.c source file. Signed-off-by:
-
kbuild test robot authored
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c:65:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
kbuild test robot authored
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:193:39-40: WARNING: Use ARRAY_SIZE Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element Semantic patch information: This makes an effort to find cases where ARRAY_SIZE can be used such as where there is a division of sizeof the array by the sizeof its first element or by any indexed element or the element type. It replaces the division of the two sizeofs by ARRAY_SIZE. Generated by: scripts/coccinelle/misc/array_size.cocci Signed-off-by:
-
kbuild test robot authored
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1788:16-22: Unneeded variable: "status". Return "VCHIQ_SUCCESS" on line 1824 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Signed-off-by:
-
kbuild test robot authored
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1817:2-12: Use setup_timer function for function on line 1818. Use setup_timer function instead of initializing timer with the function and data fields Generated by: scripts/coccinelle/api/setup_timer.cocci Signed-off-by:
-
Greg Kroah-Hartman authored
We want the staging/iio fixes in here as well to resolve issues and merge problems. Signed-off-by:
-
- 13 Nov, 2016 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "ARM fixes. There are a couple pending x86 patches but they'll have to wait for next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs KVM: arm/arm64: vgic: Prevent access to invalid SPIs arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
-
Linus Torvalds authored
Merge media fixes from Mauro Carvalho Chehab: "This contains two patches fixing problems with my patch series meant to make USB drivers to work again after the DMA on stack changes. The last patch on this series is actually not related to DMA on stack. It solves a longstanding bug affecting module unload, causing module_put() to be called twice. It was reported by the user who reported and tested the issues with the gp8psk driver with the DMA fixup patches. As we're late at -rc cycle, maybe you prefer to not apply it right now. If this is the case, I'll add to the pile of patches for 4.10. Exceptionally this time, I'm sending the patches via e-mail, because I'm on another trip, and won't be able to use the usual procedure until Monday. Also, it is only three patches, and you followed already the discussions about the first one" * emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>: gp8psk: Fix DVB frontend attach gp8psk: fix gp8psk_usb_in_op() logic dvb-usb: move data_mutex to struct dvb_usb_device
-
