- 06 Jan, 2011 25 commits
-
-
Fred Isaman authored
This is the heart of the wave 2 submission. Add the code to trigger drain and forget of any afected layouts. In addition, we set a "barrier", below which any LAYOUTGET reply is ignored. This is to compensate for the fact that we do not wait for outstanding LAYOUTGETs to complete as per section 12.5.5.2.1 of RFC 5661. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
This is the xdr decoding for CB_LAYOUTRECALL. Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
This will be required to allow us to grab reference outside of i_lock. While we are at it, make put_layout_hdr take the same argument as all the related functions. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Either a bad server reply, or our ignoring of multiple array segments in a reply, can cause a reply to not meet our requirements. Ensure that we ignore such replies. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Since this list will be used to search for layouts to recall, this is necessary to avoid a race where the recall comes in, sees there is nothing in the client list, and prepares to return NOMATCHING, while the LAYOUTGET gets processed before the recall updates the stateid. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs using the previous stateid are completed. This requires choosing the stateid to encode earlier, so we can abort if one is not available (we want to use the open stateid, but a LAYOUTGET is already out using it), and adding a count of the number of outstanding rpc calls using layout state (which for now consist solely of LAYOUTGETs). Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
No functional changes, just some code minor code rearrangement and comments. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
This is to prepare the way for sensible io draining. Instead of just removing the lseg from the list, we instead clear the VALID flag (preventing new io from grabbing references to the lseg) and remove the reference holding it in the list. Thus the lseg will be removed once any io in progress completes and any references still held are dropped. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
This prepares for future changes, where the layout state needs to change atomically with several other variables. In particular, it will need to know if lo->segs is empty, as we test that instead of manipulating the NFS_LAYOUT_STATEID_SET bit. Moreover, the layoutstateid is not really a read-mostly structure, as it is written almost as often as it is read. The behavior of pnfs_get_layout_stateid is also slightly changed, so that it no longer changes the stateid. Its name is changed to +pnfs_choose_layoutget_stateid. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
While we are renaming all the fields, change lo->state to lo->plh_flags. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Comment references get_layout_hdr_locked, which never existed in submitted code. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Differentiate from server backchannel Signed-off-by: Andy Adamson <andros@netapp.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Currently session draining only drains the fore channel. The back channel processing must also be drained. Use the back channel highest_slot_used to indicate that a callback is being processed by the callback thread. Move the session complete to be per channel. When the session is draininig, wait for any current back channel processing to complete and stop all new back channel processing by returning NFS4ERR_DELAY to the back channel client. Drain the back channel, then the fore channel. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Signed-off-by: Andy Adamson <andros@netapp.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Fixes a bug where the nfs_client could be freed during callback processing. Refactor nfs_find_client to use minorversion specific means to locate the correct nfs_client structure. In the NFS layer, V4.0 clients are found using the callback_ident field in the CB_COMPOUND header. V4.1 clients are found using the sessionID in the CB_SEQUENCE operation which is also compared against the sessionID associated with the back channel thread after a successful CREATE_SESSION. Each of these methods finds the one an only nfs_client associated with the incoming callback request - so nfs_find_client_next is not needed. In the RPC layer, the pg_authenticate call needs to find the nfs_client. For the v4.0 callback service, the callback identifier has not been decoded so a search by address, version, and minorversion is used. The sessionid for the sessions based callback service has (usually) not been set for the pg_authenticate on a CB_NULL call which can be sent prior to the return of a CREATE_SESSION call, so the sessionid associated with the back channel thread is not used to find the client in pg_authenticate for CB_NULL calls. Pass the referenced nfs_client to each CB_COMPOUND operation being proceesed via the new cb_process_state structure. The reference is held across cb_compound processing. Use the new cb_process_state struct to move the NFS4ERR_RETRY_UNCACHED_REP processing from process_op into nfs4_callback_sequence where it belongs. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The sessions based callback service is started prior to the CREATE_SESSION call so that it can handle CB_NULL requests which can be sent before the CREATE_SESSION call returns and the session ID is known. Set the callback sessionid after a sucessful CREATE_SESSION. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Use the small id to pointer translator service to provide a unique callback identifier per SETCLIENTID call used to identify the v4.0 callback service associated with the clientid. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Resetting the client minor version operations causes nfs4_destroy_callback to fail to shutdown the NFSv4.1 callback service. There is no reason to reset the client minorversion operations when the nfs_client struct is being freed. Remove the minorverion reset and rename the function. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The new back channel transport means we call the normal creation routine as well as svc_xprt_put. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Move the current sock create and destroy routines into the new transport ops. Back channel socket will be destroyed by the svc_closs_all call in svc_destroy. Added check: only TCP supported on shared back channel. Signed-off-by: Andy Adamson <andros@netapp.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The NFSv4.1 shared back channel does not need to call svc_drop because the callback service never outlives the single connection it services, and it reuses it's buffers and keeps the trasport. Signed-off-by: Andy Adamson <andros@netapp.com> Acked-by: Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 Jan, 2011 7 commits
-
-
Aneesh Kumar K.V authored
This patch make nfsv4 use the generic xattr handling code to get the nfsv4 acl. This will help us to add richacl support to nfsv4 in later patches Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Aneesh Kumar K.V authored
We want to skip VFS applying mode for NFS. So set MS_POSIXACL always and selectively use umask. Ideally we would want to use umask only when we don't have inheritable ACEs set. But NFS currently don't allow to send umask to the server. So this is best what we can do and this is consistent with NFSv3 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Namhyung Kim authored
Use ERR_CAST() intead of wierd-looking cast. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
J. Bruce Fields authored
Trivial, but confusing when you're trying to grep through this code.... Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
On Tue, 2010-12-14 at 16:58 +0800, Mi Jinlong wrote: > Hi, > > When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic > at NFS client's __rpc_create_common function. > > The panic place is: > rpc_mkpipe > __rpc_lookup_create() <=== find pipefile *idmap* > __rpc_mkpipe() <=== pipefile is *idmap* > __rpc_create_common() > ****** BUG_ON(!d_unhashed(dentry)); ****** *panic* > > It means that the dentry's d_flags have be set DCACHE_UNHASHED, > but it should not be set here. > > Is someone known this bug? or give me some idea? > > A reproduce program is append, but it can't reproduce the bug every time. > the export is: "/nfsroot *(rw,no_root_squash,fsid=0,insecure)" > > And the panic message is append. > > ============================================================================ > #!/bin/sh > > LOOPTOTAL=768 > LOOPCOUNT=0 > ret=0 > > while [ $LOOPCOUNT -ne $LOOPTOTAL ] > do > ((LOOPCOUNT += 1)) > service nfs restart > /usr/sbin/rpc.idmapd > mount -t nfs4 127.0.0.1:/ /mnt|| return 1; > ls -l /var/lib/nfs/rpc_pipefs/nfs/*/ > umount /mnt > echo $LOOPCOUNT > done > > =============================================================================== > Code: af 60 01 00 00 89 fa 89 f0 e8 64 cf 89 f0 e8 5c 7c 64 cf 31 c0 8b 5c 24 10 8b > 74 24 14 8b 7c 24 18 8b 6c 24 1c 83 c4 20 c3 <0f> 0b eb fc 8b 46 28 c7 44 24 08 20 > de ee f0 c7 44 24 04 56 ea > EIP:[<f0ee92ea>] __rpc_create_common+0x8a/0xc0 [sunrpc] SS:ESP 0068:eccb5d28 > ---[ end trace 8f5606cd08928ed2]--- > Kernel panic - not syncing: Fatal exception > Pid:7131, comm: mount.nfs4 Tainted: G D -------------------2.6.32 #1 > Call Trace: > [<c080ad18>] ? panic+0x42/0xed > [<c080e42c>] ? oops_end+0xbc/0xd0 > [<c040b090>] ? do_invalid_op+0x0/0x90 > [<c040b10f>] ? do_invalid_op+0x7f/0x90 > [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc] > [<f0edc433>] ? rpc_free_task+0x33/0x70[sunrpc] > [<f0ed6508>] ? prc_call_sync+0x48/0x60[sunrpc] > [<f0ed656e>] ? rpc_ping+0x4e/0x60[sunrpc] > [<f0ed6eaf>] ? rpc_create+0x38f/0x4f0[sunrpc] > [<c080d80b>] ? error_code+0x73/0x78 > [<f0ee92ea>] ? __rpc_create_common+0x8a/0xc0[sunrpc] > [<c0532bda>] ? d_lookup+0x2a/0x40 > [<f0ee94b1>] ? rpc_mkpipe+0x111/0x1b0[sunrpc] > [<f10a59f4>] ? nfs_create_rpc_client+0xb4/0xf0[nfs] > [<f10d6c6d>] ? nfs_fscache_get_client_cookie+0x1d/0x50[nfs] > [<f10d3fcb>] ? nfs_idmap_new+0x7b/0x140[nfs] > [<c05e76aa>] ? strlcpy+0x3a/0x60 > [<f10a60ca>] ? nfs4_set_client+0xea/0x2b0[nfs] > [<f10a6d0c>] ? nfs4_create_server+0xac/0x1b0[nfs] > [<c04f1400>] ? krealloc+0x40/0x50 > [<f10b0e8b>] ? nfs4_remote_get_sb+0x6b/0x250[nfs] > [<c04f14ec>] ? kstrdup+0x3c/0x60 > [<c0520739>] ? vfs_kern_mount+0x69/0x170 > [<f10b1a3c>] ? nfs_do_root_mount+0x6c/0xa0[nfs] > [<f10b1b47>] ? nfs4_try_mount+0x37/0xa0[nfs] > [<f10afe6d>] ? nfs4_validate_text_mount_data+-x7d/0xf0[nfs] > [<f10b1c42>] ? nfs4_get_sb+0x92/0x2f0 > [<c0520739>] ? vfs_kern_mount+0x69/0x170 > [<c05366d2>] ? get_fs_type+0x32/0xb0 > [<c052089f>] ? do_kern_mount+0x3f/0xe0 > [<c053954f>] ? do_mount+0x2ef/0x740 > [<c0537740>] ? copy_mount_options+0xb0/0x120 > [<c0539a0e>] ? sys_mount+0x6e/0xa0 Hi, Does the following patch fix the problem? Cheers Trond -------------------------- SUNRPC: Fix a BUG in __rpc_create_common From: Trond Myklebust <Trond.Myklebust@netapp.com> Mi Jinlong reports: When testing NFSv4 at RHEL6 with kernel 2.6.32, I got a kernel panic at NFS client's __rpc_create_common function. The panic place is: rpc_mkpipe __rpc_lookup_create() <=== find pipefile *idmap* __rpc_mkpipe() <=== pipefile is *idmap* __rpc_create_common() ****** BUG_ON(!d_unhashed(dentry)); ****** *panic* The test is wrong: we can find ourselves with a hashed negative dentry here if the idmapper tried to look up the file before we got round to creating it. Just replace the BUG_ON() with a d_drop(dentry). Reported-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Dan Carpenter authored
We unlock again after we goto out. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jesper Juhl authored
Hi, In fs/nfs/proc.c::nfs_proc_symlink() we will leak memory if either nfs_alloc_fhandle() or nfs_alloc_fattr() returns NULL but the other one doesn't. This patch ensures memory allocated by one when the other fails is always released (this is safe since nfs_free_fattr() and nfs_free_fhandle() both call kfree which deals gracefully with NULL pointers). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 Dec, 2010 6 commits
-
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Update: added check for zero value as it was before (note: can't simply check mountd_port for positive value because it's typeof unsigned short) Default value for mount server port is set to NFS_UNSPEC_PORT (-1) and will not be changed during parsing mount options for mound data version 6. This default value will be showed for mountport in /proc/mounts always since current default check is for zero value. This small mistake leads to big problem, because during umount.nfs execution from old user-space utils (at least nfs-utils 1.0.9) this value will be used as the server port to connect to. This request will be rejected (since port is 65535) and thus nfs mount point can't be unmounted. Note from Chuck Lever (chuck.lever@oracle.com): this is only possible if /etc/mtab is a link to /proc/mounts. Not all systems have this configuration. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
J. Bruce Fields authored
Note that cl_lease_time is in jiffies. This can cause a very long wait in the NFS4ERR_CLID_INUSE case. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Jesper Juhl authored
Take advantage of kmem_cache_zalloc() in nfs_page_alloc(). Save a call to memset() and a few bytes. Before: [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o text data bss dec hex filename 1765 0 8 1773 6ed fs/nfs/pagelist.o After: [jj@dragon linux-2.6]$ size fs/nfs/pagelist.o text data bss dec hex filename 1749 0 8 1757 6dd fs/nfs/pagelist.o Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 Dec, 2010 2 commits
-
-
Chuck Lever authored
Clean up. The contents of the src_sap field is not used in nlm_alloc_host(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up. Remove the now unused helper nlm_lookup_host(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-