Due to other additional responsibilities Tom would no longer
be able to support AMD XGBE driver.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230116085015.443127-1-Shyam-sundar.S-k@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().

Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.

Fixes: 1aac309d ("net: ipa: use autosuspend")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In a number of cases the driver assigns a default value of -1 to
priv->plat->phy_addr. This may result in calling mdiobus_get_phy()
with addr parameter being -1. Therefore check for this scenario and
bail out before calling mdiobus_get_phy().

Fixes: 42e87024 ("net: stmmac: Fix case when PHY handle is not present")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The caller may pass any value as addr, what may result in an out-of-bounds
access to array mdio_map. One existing case is stmmac_init_phy() that
may pass -1 as addr. Therefore validate addr before using it.

Fixes: 7f854420 ("phy: Add API for {un}registering an mdio device to a bus.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Packet len computed as difference of length word extracted from
skb data and four may result in a negative value. In such case
processing of the buffer should be interrupted rather than
setting sr_skb->len to an unexpectedly large value (due to cast
from signed to unsigned integer) and passing sr_skb to
usbnet_skb_return.

Fixes: e9da0b56 ("sr9700: sanity check for packet length")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20230114182326.30479-1-szymon.heidrich@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Using GFP_KERNEL in preemption disable context, causing below warning
when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.

[   32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274
[   32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
[   32.558707] preempt_count: 1, expected: 0
[   32.562710] RCU nest depth: 0, expected: 0
[   32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G        W          6.2.0-rc2-00269-gae9dcb91 #7
[   32.576188] Hardware name: Marvell CN106XX board (DT)
[   32.581232] Call trace:
[   32.583670]  dump_backtrace.part.0+0xe0/0xf0
[   32.587937]  show_stack+0x18/0x30
[   32.591245]  dump_stack_lvl+0x68/0x84
[   32.594900]  dump_stack+0x18/0x34
[   32.598206]  __might_resched+0x12c/0x160
[   32.602122]  __might_sleep+0x48/0xa0
[   32.605689]  __kmem_cache_alloc_node+0x2b8/0x2e0
[   32.610301]  __kmalloc+0x58/0x190
[   32.613610]  otx2_sq_aura_pool_init+0x1a8/0x314
[   32.618134]  otx2_open+0x1d4/0x9d0

To avoid use of GFP_ATOMIC for memory allocation, disable preemption
after all memory allocation is done.

Fixes: 4af1b64f ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cong Wang says:

====================
l2tp: fix race conditions in l2tp_tunnel_register()

This patchset contains two patches, the first one is a preparation for
the second one which is the actual fix. Please find more details in
each patch description.

I have ran the l2tp test (https://github.com/katalix/l2tp-ktest),
all test cases are passed.

v3: preserve EEXIST errno for user-space
v2: move IDR allocation to l2tp_tunnel_register()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The code in l2tp_tunnel_register() is racy in several ways:

1. It modifies the tunnel socket _after_ publishing it.

2. It calls setup_udp_tunnel_sock() on an existing socket without
   locking.

3. It changes sock lock class on fly, which triggers many syzbot
   reports.

This patch amends all of them by moving socket initialization code
before publishing and under sock lock. As suggested by Jakub, the
l2tp lockdep class is not necessary as we can just switch to
bh_lock_sock_nested().

Fixes: 37159ef2 ("l2tp: fix a lockdep splat")
Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation")
Reported-by: syzbot+52866e24647f9a23403f@syzkaller.appspotmail.com
Reported-by: syzbot+94cc2a66fc228b23f360@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Guillaume Nault <gnault@redhat.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp uses l2tp_tunnel_list to track all registered tunnels and
to allocate tunnel ID's. IDR can do the same job.

More importantly, with IDR we can hold the ID before a successful
registration so that we don't need to worry about late error
handling, it is not easy to rollback socket changes.

This is a preparation for the following fix.

Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Guillaume Nault <gnault@redhat.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported a nasty crash [1] in net_tx_action() which
made little sense until we got a repro.

This repro installs a taprio qdisc, but providing an
invalid TCA_RATE attribute.

qdisc_create() has to destroy the just initialized
taprio qdisc, and taprio_destroy() is called.

However, the hrtimer used by taprio had already fired,
therefore advance_sched() called __netif_schedule().

Then net_tx_action was trying to use a destroyed qdisc.

We can not undo the __netif_schedule(), so we must wait
until one cpu serviced the qdisc before we can proceed.

Many thanks to Alexander Potapenko for his help.

[1]
BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
 queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
 do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
 __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
 _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
 spin_trylock include/linux/spinlock.h:359 [inline]
 qdisc_run_begin include/net/sch_generic.h:187 [inline]
 qdisc_run+0xee/0x540 include/net/pkt_sched.h:125
 net_tx_action+0x77c/0x9a0 net/core/dev.c:5086
 __do_softirq+0x1cc/0x7fb kernel/softirq.c:571
 run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934
 smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164
 kthread+0x31b/0x430 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:732 [inline]
 slab_alloc_node mm/slub.c:3258 [inline]
 __kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970
 kmalloc_reserve net/core/skbuff.c:358 [inline]
 __alloc_skb+0x346/0xcf0 net/core/skbuff.c:430
 alloc_skb include/linux/skbuff.h:1257 [inline]
 nlmsg_new include/net/netlink.h:953 [inline]
 netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436
 netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507
 rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg net/socket.c:734 [inline]
 ____sys_sendmsg+0xabc/0xe90 net/socket.c:2482
 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536
 __sys_sendmsg net/socket.c:2565 [inline]
 __do_sys_sendmsg net/socket.c:2574 [inline]
 __se_sys_sendmsg net/socket.c:2572 [inline]
 __x64_sys_sendmsg+0x367/0x540 net/socket.c:2572
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022

Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pable Neira Ayuso says:

====================

The following patchset contains Netfilter fixes for net:

1) Increase timeout to 120 seconds for netfilter selftests to fix
   nftables transaction tests, from Florian Westphal.

2) Fix overflow in bitmap_ip_create() due to integer arithmetics
   in a 64-bit bitmask, from Gavrilov Ilia.

3) Fix incorrect arithmetics in nft_payload with double-tagged
   vlan matching.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct queue statistics reading. All queue statistics are stored as unsigned
long values. The retrieval for ethtool fetches these values as u64. However, on
some systems the size of the counters are 32 bit. That yields wrong queue
statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by
using the correct data type.

Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short
period of time:

Non-patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
|     q0_tx_pkt_n: 3775276254951 # ???
|     q0_tx_irq_n: 879
|     q0_rx_pkt_n: 1194000908909 # ???
|     q0_rx_irq_n: 278

Patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
|     q0_tx_pkt_n: 2434
|     q0_tx_irq_n: 1274
|     q0_rx_pkt_n: 1604
|     q0_rx_irq_n: 846

Fixes: 68e9c5de ("net: stmmac: add ethtool per-queue statistic framework")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.

This fix resolves two use cases.

  1. Using tc to destroy the htb.
    - Netdev was being prematurely activated before the htb was fully
      destroyed.
  2. Using tc to replace the htb with another qdisc (which also leads to
     the htb being destroyed).
    - Premature netdev activation like previous case. Newly grafted qdisc
      was also getting accidentally overwritten when destroying the htb.

Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230113005528.302625-1-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: userspace pm: create sockets for the right family

Before these patches, the Userspace Path Manager would allow the
creation of subflows with wrong families: taking the one of the MPTCP
socket instead of the provided ones and resulting in the creation of
subflows with likely not the right source and/or destination IPs. It
would also allow the creation of subflows between different families or
not respecting v4/v6-only socket attributes.

Patch 1 lets the userspace PM select the proper family to avoid creating
subflows with the wrong source and/or destination addresses because the
family is not the expected one.

Patch 2 makes sure the userspace PM doesn't allow the userspace to
create subflows for a family that is not allowed.

Patch 3 validates scenarios with a mix of v4 and v6 subflows for the
same MPTCP connection.

These patches fix issues introduced in v5.19 when the userspace path
manager has been introduced.
====================

Link: https://lore.kernel.org/r/20230112-upstream-net-20230112-netlink-v4-v6-v1-0-6a8363a221d2@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux,
it is possible to have that if the MPTCP socket has been created with
AF_INET6 family without the IPV6_V6ONLY option.

Here, a new IPv4 subflow is being added to the initial IPv6 connection,
then being removed using Netlink commands.

Cc: stable@vger.kernel.org # v5.19+
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY
option has been set, the userspace PM would allow creating subflows
using IPv4 addresses, e.g. mapped in v6.

The kernel side of userspace PM will also accept creating subflows with
local and remote addresses having different families. Depending on the
subflow socket's family, different behaviours are expected:
 - If AF_INET is forced with a v6 address, the kernel will take the last
   byte of the IP and try to connect to that: a new subflow is created
   but to a non expected address.
 - If AF_INET6 is forced with a v4 address, the kernel will try to
   connect to a v4 address (v4-mapped-v6). A -EBADF error from the
   connect() part is then expected.

It is then required to check the given families can be accepted. This is
done by using a new helper for addresses family matching, taking care of
IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by
the in-kernel path-manager to use mixed IPv4 and IPv6 addresses.

While at it, a clear error message is now reported if there are some
conflicts with the families that have been passed by the userspace.

Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Let the caller specify the to-be-created subflow family.

For a given MPTCP socket created with the AF_INET6 family, the current
userspace PM can already ask the kernel to create subflows in v4 and v6.
If "plain" IPv4 addresses are passed to the kernel, they are
automatically mapped in v6 addresses "by accident". This can be
problematic because the userspace will need to pass different addresses,
now the v4-mapped-v6 addresses to destroy this new subflow.

On the other hand, if the MPTCP socket has been created with the AF_INET
family, the command to create a subflow in v6 will be accepted but the
result will not be the one as expected as new subflow will be created in
IPv4 using part of the v6 addresses passed to the kernel: not creating
the expected subflow then.

No functional change intended for the in-kernel PM where an explicit
enforcement is currently in place. This arbitrary enforcement will be
leveraged by other patches in a future version.

Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.

Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This lockdep splat says it better than I could:

================================
WARNING: inconsistent lock state
6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0
{IN-SOFTIRQ-W} state was registered at:
  _raw_spin_lock+0x5c/0xc0
  sch_direct_xmit+0x148/0x37c
  __dev_queue_xmit+0x528/0x111c
  ip6_finish_output2+0x5ec/0xb7c
  ip6_finish_output+0x240/0x3f0
  ip6_output+0x78/0x360
  ndisc_send_skb+0x33c/0x85c
  ndisc_send_rs+0x54/0x12c
  addrconf_rs_timer+0x154/0x260
  call_timer_fn+0xb8/0x3a0
  __run_timers.part.0+0x214/0x26c
  run_timer_softirq+0x3c/0x74
  __do_softirq+0x14c/0x5d8
  ____do_softirq+0x10/0x20
  call_on_irq_stack+0x2c/0x5c
  do_softirq_own_stack+0x1c/0x30
  __irq_exit_rcu+0x168/0x1a0
  irq_exit_rcu+0x10/0x40
  el1_interrupt+0x38/0x64
irq event stamp: 7825
hardirqs last  enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130
hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8
softirqs last  enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8
softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(_xmit_ETHER#2);
  <Interrupt>
    lock(_xmit_ETHER#2);

 *** DEADLOCK ***

3 locks held by kworker/1:3/179:
 #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34

Workqueue: events enetc_tx_onestep_tstamp
Call trace:
 print_usage_bug.part.0+0x208/0x22c
 mark_lock+0x7f0/0x8b0
 __lock_acquire+0x7c4/0x1ce0
 lock_acquire.part.0+0xe0/0x220
 lock_acquire+0x68/0x84
 _raw_spin_lock+0x5c/0xc0
 netif_freeze_queues+0x5c/0xc0
 netif_tx_lock+0x24/0x34
 enetc_tx_onestep_tstamp+0x20/0x100
 process_one_work+0x28c/0x6c0
 worker_thread+0x74/0x450
 kthread+0x118/0x11c

but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.

To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.

Fixes: 7294380c ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If uhdlc_priv_tsa != 1 then utdm is not initialized.
And if ret != NULL then goto undo_uhdlc_init, where
utdm is dereferenced. Same if dev == NULL.

Found by Astra Linux on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.

Fixes: 8d68100a ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm")
Signed-off-by: Esina Ekaterina <eesina@astralinux.ru>
Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a use-after-free that occurs in kfree_skb() called from
local_cleanup(). This could happen when killing nfc daemon (e.g. neard)
after detaching an nfc device.
When detaching an nfc device, local_cleanup() called from
nfc_llcp_unregister_device() frees local->rx_pending and decreases
local->ref by kref_put() in nfc_llcp_local_put().
In the terminating process, nfc daemon releases all sockets and it leads
to decreasing local->ref. After the last release of local->ref,
local_cleanup() called from local_release() frees local->rx_pending
again, which leads to the bug.

Setting local->rx_pending to NULL in local_cleanup() could prevent
use-after-free when local_cleanup() is called twice.

Found by a modified version of syzkaller.

BUG: KASAN: use-after-free in kfree_skb()

Call Trace:
dump_stack_lvl (lib/dump_stack.c:106)
print_address_description.constprop.0.cold (mm/kasan/report.c:306)
kasan_check_range (mm/kasan/generic.c:189)
kfree_skb (net/core/skbuff.c:955)
local_cleanup (net/nfc/llcp_core.c:159)
nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172)
nfc_llcp_local_put (net/nfc/llcp_core.c:181)
llcp_sock_destruct (net/nfc/llcp_sock.c:959)
__sk_destruct (net/core/sock.c:2133)
sk_destruct (net/core/sock.c:2181)
__sk_free (net/core/sock.c:2192)
sk_free (net/core/sock.c:2203)
llcp_sock_release (net/nfc/llcp_sock.c:646)
__sock_release (net/socket.c:650)
sock_close (net/socket.c:1365)
__fput (fs/file_table.c:306)
task_work_run (kernel/task_work.c:179)
ptrace_notify (kernel/signal.c:2354)
syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278)
syscall_exit_to_user_mode (kernel/entry/common.c:296)
do_syscall_64 (arch/x86/entry/common.c:86)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106)

Allocated by task 4719:
kasan_save_stack (mm/kasan/common.c:45)
__kasan_slab_alloc (mm/kasan/common.c:325)
slab_post_alloc_hook (mm/slab.h:766)
kmem_cache_alloc_node (mm/slub.c:3497)
__alloc_skb (net/core/skbuff.c:552)
pn533_recv_response (drivers/nfc/pn533/usb.c:65)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671)
usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704)
tasklet_action_common.isra.0 (kernel/softirq.c:797)
__do_softirq (kernel/softirq.c:571)

Freed by task 1901:
kasan_save_stack (mm/kasan/common.c:45)
kasan_set_track (mm/kasan/common.c:52)
kasan_save_free_info (mm/kasan/genericdd.c:518)
__kasan_slab_free (mm/kasan/common.c:236)
kmem_cache_free (mm/slub.c:3809)
kfree_skbmem (net/core/skbuff.c:874)
kfree_skb (net/core/skbuff.c:931)
local_cleanup (net/nfc/llcp_core.c:159)
nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617)
nfc_unregister_device (net/nfc/core.c:1179)
pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846)
pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579)
usb_unbind_interface (drivers/usb/core/driver.c:458)
device_release_driver_internal (drivers/base/dd.c:1279)
bus_remove_device (drivers/base/bus.c:529)
device_del (drivers/base/core.c:3665)
usb_disable_device (drivers/usb/core/message.c:1420)
usb_disconnect (drivers/usb/core.c:2261)
hub_event (drivers/usb/core/hub.c:5833)
process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281)
worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423)
kthread (kernel/kthread.c:319)
ret_from_fork (arch/x86/entry/entry_64.S:301)

Fixes: 3536da06 ("NFC: llcp: Clean local timers and works when removing a device")
Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Link: https://lore.kernel.org/r/20230111131914.3338838-1-jisoo.jang@yonsei.ac.krSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Current code for RSS_GET ethtool command includes netlink attributes
in reply message to user space even if they are null. Added checks
to include netlink attribute in reply message only if a value is
received from driver. Drivers might return null for RSS indirection
table or hash key. Instead of including attributes with empty value
in the reply message, add netlink attribute only if there is content.

Fixes: 7112a046 ("ethtool: add netlink based get rss support")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix rxrpc_connect_call() to return -ENOMEM rather than 0 if it fails to
look up a peer.

This generated a smatch warning:
        net/rxrpc/call_object.c:303 rxrpc_connect_call() warn: missing error code 'ret'

I think this also fixes a syzbot-found bug:

        rxrpc: Assertion failed - 1(0x1) == 11(0xb) is false
        ------------[ cut here ]------------
        kernel BUG at net/rxrpc/call_object.c:645!

where the call being put is in the wrong state - as would be the case if we
failed to clear up correctly after the error in rxrpc_connect_call().

Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Reported-and-tested-by: syzbot+4bb6356bb29d6299360e@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/202301111153.9eZRYLf1-lkp@intel.com/Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/2438405.1673460435@warthog.procyon.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Raju Rangoju says:

====================
amd-xgbe: PFC and KR-Training fixes

This patch series fixes the issues in kr-training and pfc

0001 - There is difference in the TX Flow Control registers (TFCR)
between the revisions of the hardware. Update the driver to use the
TFCR based on the reported version of the hardware.

0002 - AN restart triggered during KR training not only aborts the KR
training process but also move the HW to unstable state. Add the
necessary changes to fix kr-taining.
====================

Link: https://lore.kernel.org/r/20230111172852.1875384-1-Raju.Rangoju@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.

Fixes: 7c12aa08 ("amd-xgbe: Move the PHY support into amd-xgbe")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.

Update the driver to use the TFCR based on the reported version of the
hardware.

Fixes: c5aa9e3b ("amd-xgbe: Initial AMD 10GbE platform driver")
Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
Some fixes, stack only for now:
 * iTXQ conversion fixes, various bugs reported
 * properly reset multiple BSSID settings
 * fix for a link_sta crash
 * fix for AP VLAN checks
 * fix for MLO address translation

* tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: fix MLO + AP_VLAN check
  mac80211: Fix MLO address translation for multiple bss case
  wifi: mac80211: reset multiple BSSID options in stop_ap()
  wifi: mac80211: Fix iTXQ AMPDU fragmentation handling
  wifi: mac80211: sdata can be NULL during AMPDU start
  wifi: mac80211: Proper mark iTXQs for resumption
  wifi: mac80211: fix initialization of rx->link and rx->link_sta
====================

Link: https://lore.kernel.org/r/20230112111941.82408-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from rxrpc.

  The rxrpc changes are noticeable large: to address a recent regression
  has been necessary completing the threaded refactor.

  Current release - regressions:

   - rxrpc:
       - only disconnect calls in the I/O thread
       - move client call connection to the I/O thread
       - fix incoming call setup race

   - eth: mlx5:
       - restore pkt rate policing support
       - fix memory leak on updating vport counters

  Previous releases - regressions:

   - gro: take care of DODGY packets

   - ipv6: deduct extension header length in rawv6_push_pending_frames

   - tipc: fix unexpected link reset due to discovery messages

  Previous releases - always broken:

   - sched: disallow noqueue for qdisc classes

   - eth: ice: fix potential memory leak in ice_gnss_tty_write()

   - eth: ixgbe: fix pci device refcount leak

   - eth: mlx5:
       - fix command stats access after free
       - fix macsec possible null dereference when updating MAC security
         entity (SecY)"

* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
  r8152: add vendor/device ID pair for Microsoft Devkit
  net: stmmac: add aux timestamps fifo clearance wait
  bnxt: make sure we return pages to the pool
  net: hns3: fix wrong use of rss size during VF rss config
  ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
  net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
  net: sched: disallow noqueue for qdisc classes
  iavf/iavf_main: actually log ->src mask when talking about it
  igc: Fix PPS delta between two synchronized end-points
  ixgbe: fix pci device refcount leak
  octeontx2-pf: Fix resource leakage in VF driver unbind
  selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
  selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
  selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
  net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
  net/mlx5e: Fix macsec ssci attribute handling in offload path
  net/mlx5: E-switch, Coverity: overlapping copy
  net/mlx5e: Don't support encap rules with gbp option
  net/mlx5: Fix ptp max frequency adjustment range
  net/mlx5e: Fix memory leak on updating vport counters
  ...

Pull s390 fixes from Heiko Carstens:

 - Add various missing READ_ONCE() to cmpxchg() loops prevent the
   compiler from potentially generating incorrect code. This includes a
   rather large change to the s390 specific hardware sampling code and
   its current use of cmpxchg_double().

   Do the fix now to get it out of the way of Peter Zijlstra's
   cmpxchg128() work, and have something that can be backported. The
   added new code includes a private 128 bit cmpxchg variant which will
   be removed again after Peter's rework is available. Also note that
   this 128 bit cmpxchg variant is used to implement 128 bit
   READ_ONCE(), while strictly speaking it wouldn't be necessary, and
   _READ_ONCE() should also be sufficient; even though it isn't obvious
   for all converted locations that this is the case. Therefore use this
   implementation for for the sake of clarity and consistency for now.

 - Fix ipl report address handling to avoid kdump failures/hangs.

 - Fix misuse of #(el)if in kernel decompressor.

 - Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36,
   caused by the recently changed discard behaviour.

 - Make sure _edata and _end symbols are always page aligned.

 - The current header guard DEBUG_H in one of the s390 specific header
   files is too generic and conflicts with the ath9k wireless driver.
   Add an _ASM_S390_ prefix to the guard to make it unique.

 - Update defconfigs.

* tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
  s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
  s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops
  s390/kexec: fix ipl report address for kdump
  s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD
  s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36
  s390: expicitly align _edata and _end symbols on page boundary
  s390/debug: add _ASM_S390_ prefix to header guard

Pull xen fixes from Juergen Gross:

 - two cleanup patches

 - a fix of a memory leak in the Xen pvfront driver

 - a fix of a locking issue in the Xen hypervisor console driver

* tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvcalls: free active map buffer on pvcalls_front_free_map
  hvc/xen: lock console list traversal
  x86/xen: Remove the unused function p2m_index()
  xen: make remove callback of xen driver void returned

Pull timer doc fixes from Ingo Molnar:

 - Fix various DocBook formatting errors in kernel/time/ that generated
   (justified) warnings during a kernel-doc build.

* tag 'timers-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Fix various kernel-doc problems

Pull perf events hw enablement from Ingo Molnar:

 - More hardware-enablement for Intel Meteor Lake & Emerald Rapid
   systems: pure model ID enumeration additions that do not affect other
   systems.

* tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add Emerald Rapids
  perf/x86/msr: Add Emerald Rapids
  perf/x86/msr: Add Meteor Lake support
  perf/x86/cstate: Add Meteor Lake support

Pull scheduler fixes from Ingo Molnar:

 - Fix scheduler frequency invariance bug related to overly long
   tickless periods triggering an integer overflow and disabling the
   feature.

 - Fix use-after-free bug in dup_user_cpus_ptr().

 - Fix do_set_cpus_allowed() deadlock scenarios related to calling
   kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
   solution here - we looked at patches to free the structure after the
   pi_lock got dropped, but that looked quite a bit messier - and none
   of this is truly performance critical. We can revisit this if it's
   too lazy of a solution ...

* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Use kfree_rcu() in do_set_cpus_allowed()
  sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
  sched/core: Fix arch_scale_freq_tick() on tickless systems

Pull objtool fix from Ingo Molnar:

 - Fix objtool to be more permissive with hand-written assembly that
   uses non-function symbols in executable sections.

* tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Tolerate STT_NOTYPE symbols at end of section

Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull nolibc fixes from Paul McKenney:

 - The fd_set structure was incorrectly defined as arrays of u32 instead
   of long, which breaks BE64. Fix courtesy of Sven Schnelle.

 - S_ISxxx macros were incorrectly testing the bits after applying them
   instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.

 - The mips code was randomly broken due to an unprotected "noreorder"
   directive in the _start code that could prevent the assembler from
   filling delayed slots. This in turn resulted in random other
   instructions being placed into those slots. Fix courtesy of Willy
   Tarreau.

 - The current nolibc header layout refrains from including files that
   are not explicitly included by the code using nolibc. Unfortunately,
   this causes build failures when such files contain definitions that
   are used (for example) by libgcc. Example definitions include raise()
   and memset(), which are called by some architectures, but only at
   certain optimization levels. Fix courtesy of Willy Tarreau.

 - gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
   inside the memset() definition. The compiler replaced this
   construction with a call to... memset(). Userland cannot be forced to
   build with -ffreestanding, so an empty asm() statement was introduced
   into the loop the loop in order to prevent the compiler from making
   this unproductive transformation. Fix courtesy of Willy Tarreau.

 - Most of the O_* macros were wrong on RISCV because their octal values
   were coded as hexadecimal. This resulted in the getdents64() selftest
   failing. Fix courtesy of Willy Tarreau.

This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.

* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
  tools/nolibc: prevent gcc from making memset() loop over itself
  tools/nolibc: fix missing includes causing build issues at -O0
  tools/nolibc: restore mips branch ordering in the _start block
  tools/nolibc: Fix S_ISxxx macros
  nolibc: fix fd_set type

The Microsoft Devkit 2023 is a an ARM64 based machine featuring a
Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other
machines, Microsoft uses a custom USB device ID.

Add the respective ID values to the driver. This makes Ethernet work on
the MS Devkit device. The chip has been visually confirmed to be a
RTL8153.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull spi fixes from Mark Brown:

 - Fixes for long standing issues with accesses to spidev->spi during
   teardown in the spidev userspace driver.

 - Rename the newly added spi-cs-setup-ns DT property to be more in line
   with our other delay properties before it becomes ABI.

 - A few driver specific fixes.

* tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spidev: remove debug messages that access spidev->spi without locking
  spi: spidev: fix a race condition when accessing spidev->spi
  spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
  spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns
  spi: cadence: Fix busy cycles calculation
  spi: mediatek: Enable irq before the spi registration

Merge tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A couple of small driver specific fixes, one of which I queued for 6.1
  but didn't actually send out so has had *plenty* of testing in -next"

* tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo
  regulator: da9211: Use irq handler when ready

Pull MTD fixes from Miquel Raynal:

 - cfi: Allow building spi-intel standalone to avoid build issues

 - parsers: scpart: Fix __udivdi3 undefined on mips

 - parsers: tplink_safeloader: Fix potential memory leak during parsing

 - Update email of Tudor Ambarus

* tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  MAINTAINERS: Update email of Tudor Ambarus
  mtd: cfi: allow building spi-intel standalone
  mtd: parsers: scpart: fix __udivdi3 undefined on mips
  mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()

Pull SCSI fixes from James Bottomley:
 "Ten small fixes (less the one that cleaned up a reverted removal),
  nine in drivers of which the ufs one is the most critical.

  The single core patch is a minor speedup to error handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort()
  scsi: hisi_sas: Fix tag freeing for reserved tags
  scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery
  scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0()
  scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile
  scsi: core: scsi_error: Do not queue pointless abort workqueue functions
  scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
  scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
  scsi: mpi3mr: Remove usage of dma_get_required_mask() API
  scsi: mpt3sas: Remove usage of dma_get_required_mask() API