Make clear which path is for user tasks and for kthreads and idle
tasks. This will allow easier plug-in of the ORC unwinder in the next
patches.

Note that we added a check for unwind error to the top of the loop, so
that an error is returned also for user tasks (the 'goto success' would
skip the check after the loop otherwise).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/lkml/20180518064713.26440-3-jslaby@suse.czSigned-off-by: Ingo Molnar <mingo@kernel.org>

The stack unwinding can sometimes fail yet. Especially with the
generated debug info. So do not yell at users -- live patching (the only
user of this interface) will inform the user about the failure
gracefully.

And given this was the only user of the macro, remove the macro proper
too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/lkml/20180518064713.26440-2-jslaby@suse.czSigned-off-by: Ingo Molnar <mingo@kernel.org>

Josh pointed out, that there is no way a frame can be after user regs.
So remove the last unwind and the check.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/lkml/20180518064713.26440-1-jslaby@suse.czSigned-off-by: Ingo Molnar <mingo@kernel.org>

Use CC_SET(z)/CC_OUT(z) instead of explicit SETZ instruction.

Using these two defines, the compiler that supports generation of
condition code outputs from inline assembly flags generates e.g.:

  cmpxchg8b %fs:(%esi)
  jne    172255 <__kmalloc+0x65>

instead of:

  cmpxchg8b %fs:(%esi)
  sete   %al
  test   %al,%al
  je     172255 <__kmalloc+0x65>

Note that older compilers now generate:

  cmpxchg8b %fs:(%esi)
  sete   %cl
  test   %cl,%cl
  je     173a85 <__kmalloc+0x65>

since we have to mark that cmpxchg8b instruction outputs to %eax
register and this way clobbers the value in the register.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180605163910.13015-1-ubizjak@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull rdma fixes from Jason Gunthorpe:
 "Here are eight fairly small fixes collected over the last two weeks.

  Regression and crashing bug fixes:

   - mlx4/5: Fixes for issues found from various checkers

   - A resource tracking and uverbs regression in the core code

   - qedr: NULL pointer regression found during testing

   - rxe: Various small bugs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/rxe: Fix missing completion for mem_reg work requests
  RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
  IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
  IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
  RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
  IB/mlx5: Fix return value check in flow_counters_set_data()
  IB/mlx5: Fix memory leak in mlx5_ib_create_flow
  IB/rxe: avoid double kfree skb

Pull networking fixes from David Miller:

 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.

 2) Fix ATM VCC memory accounting, from David Woodhouse.

 3) fib6_info objects need RCU freeing, from Eric Dumazet.

 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.

 5) Fix clobbered error code in enic_open() failure path, from
    Govindarajulu Varadarajan.

 6) Propagate dev_get_valid_name() error returns properly, from Li
    RongQing.

 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.

 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
    Davide Caratti.

 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  ip: limit use of gso_size to udp
  stmmac: fix DMA channel hang in half-duplex mode
  net: stmmac: socfpga: add additional ocp reset line for Stratix10
  net: sungem: fix rx checksum support
  bpfilter: ignore binary files
  bpfilter: fix build error
  net/usb/drivers: Remove useless hrtimer_active check
  net/sched: act_ife: preserve the action control in case of error
  net/sched: act_ife: fix recursive lock and idr leak
  net: ethernet: fix suspend/resume in davinci_emac
  net: propagate dev_get_valid_name return code
  enic: do not overwrite error code
  net/tcp: Fix socket lookups with SO_BINDTODEVICE
  ptp: replace getnstimeofday64() with ktime_get_real_ts64()
  net/ipv6: respect rcu grace period before freeing fib6_info
  net: net_failover: fix typo in net_failover_slave_register()
  ipvlan: use ETH_MAX_MTU as max mtu
  net: hamradio: use eth_broadcast_addr
  enic: initialize enic->rfs_h.lock in enic_probe
  MAINTAINERS: Add Sam as the maintainer for NCSI
  ...

Pull HID fixes from Jiri Kosina:

 - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke

 - fix for hibernation in Intel ISH driver, from Even Xu

 - crash fix for hid-steam driver, from Rodrigo Rivas Costa

 - new device ID addition to google-hammer driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large
  HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation
  HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
  HID: google: Add support for whiskers

Pull dma-mapping rename from Christoph Hellwig:
 "Move all the dma-mapping code to kernel/dma and lose their dma-*
  prefixes"

* tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move all DMA mapping code to kernel/dma
  dma-mapping: use obj-y instead of lib-y for generic dma ops

The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains
a typo which defines an incorrect logical maximum Y value. This causes
a small portion of the bottom of the tablet to become unusable (both
because the area is below the "bottom" of the tablet and because
'wacom_wac_event' ignores out-of-range values). It also results in a
skewed aspect ratio.

To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites
the data with the correct value.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Current ISH driver only registers suspend/resume PM callbacks which don't
support hibernation (suspend to disk). Basically after hiberation, the ISH
can't resume properly and user may not see sensor events (for example: screen
		rotation may not work).

User will not see a crash or panic or anything except the following message
in log:

	hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device

So this patch adds support for S4/hiberbation to ISH by using the
SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend
and resume functions will now be used for both suspend to RAM and hibernation.

If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend
and resume related functions won't be used, so mark them as __maybe_unused to
clarify that this is the intended behavior, and remove #ifdefs for power
management.

Cc: stable@vger.kernel.org
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When creating the low-level hidraw device, the reference to steam_device
was stored using hid_set_drvdata(). But this value is not guaranteed to
be kept when set before calling probe. If this pointer is reset, it
crashes when opening the emulated hidraw device.

It looks like hid_set_drvdata() is for users "avobe" this hid_device,
while hid_device.driver_data it for users "below" this one.

In this case, we are creating a virtual hidraw device, so we must use
hid_device.driver_data.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The rewrite of the cmdline fetching missed the fact that we used to also
return the final terminating NUL character of the last argument.  I
hadn't noticed, and none of the tools I tested cared, but something
obviously must care, because Michal Kubecek noticed the change in
behavior.

Tweak the "find the end" logic to actually include the NUL character,
and once past the eend of argv, always start the strnlen() at the
expected (original) argument end.

This whole "allow people to rewrite their arguments in place" is a nasty
hack and requires that odd slop handling at the end of the argv array,
but it's our traditional model, so we continue to support it.
Repored-and-bisected-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-and-tested-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ipcm(6)_cookie field gso_size is set only in the udp path. The ip
layer copies this to cork only if sk_type is SOCK_DGRAM. This check
proved too permissive. Ping and l2tp sockets have the same type.

Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to
exclude ping sockets.

v1 -> v2
- remove irrelevant whitespace changes

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HW does not support Half-duplex mode in multi-queue
scenario. Fix it by not advertising the Half-Duplex
mode if multi-queue enabled.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
are friends"), sungem owners reported the infamous "eth0: hw csum failure"
message.

CHECKSUM_COMPLETE has in fact never worked for this driver, but this
was masked by the fact that upper stacks had to strip the FCS, and
therefore skb->ip_summed was set back to CHECKSUM_NONE before
my recent change.

Driver configures a number of bytes to skip when the chip computes
the checksum, and for some reason only half of the Ethernet header
was skipped.

Then a second problem is that we should strip the FCS by default,
unless the driver is updated to eventually support NETIF_F_RXFCS in
the future.

Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
or not, so that the admin can turn off rx checksum if wanted.

Many thanks to Andreas Schwab and Mathieu Malaterre for their
help in debugging this issue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is
enabled, add it to .gitignore to avoid committing it.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpfilter Makefile assumes that the system locale is en_US, and the
parsing of objdump output fails.
Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns
only 2 processes instead of 7.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code does:

 if (hrtimer_active(&t))
    hrtimer_cancel(&t);

However, hrtimer_cancel() checks if the timer is active, so the
test above is pointless.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

in the following script

 # tc actions add action ife encode allow prio pass index 42
 # tc actions replace action ife encode allow tcindex drop index 42

the action control should remain equal to 'pass', if the kernel failed
to replace the TC action. Pospone the assignment of the action control,
to ensure it is not overwritten in the error path of tcf_ife_init().

Fixes: ef6980b6 ("introduce IFE action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a recursive lock warning [1] can be observed with the following script,

 # $TC actions add action ife encode allow prio pass index 42
 IFE type 0xED3E
 # $TC actions replace action ife encode allow tcindex pass index 42

in case the kernel was unable to run the last command (e.g. because of
the impossibility to load 'act_meta_skbtcindex'). For a similar reason,
the kernel can leak idr in the error path of tcf_ife_init(), because
tcf_idr_release() is not called after successful idr reservation:

 # $TC actions add action ife encode allow tcindex index 47
 IFE type 0xED3E
 RTNETLINK answers: No such file or directory
 We have an error talking to the kernel
 # $TC actions add action ife encode allow tcindex index 47
 IFE type 0xED3E
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel
 # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47
 IFE type 0xFEFE
 RTNETLINK answers: No space left on device
 We have an error talking to the kernel

Since tcfa_lock is already taken when the action is being edited, a call
to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock
again. On the other hand, tcf_idr_release() needs to be called in the
error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation.
Fix both problems in tcf_ife_init().
Since the cleanup() routine can now be called when ife->params is NULL,
also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu).

 [1]
 ============================================
 WARNING: possible recursive locking detected
 4.17.0-rc4.kasan+ #417 Tainted: G            E
 --------------------------------------------
 tc/3932 is trying to acquire lock:
 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife]

 but task is already holding lock:
 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(&p->tcfa_lock)->rlock);
   lock(&(&p->tcfa_lock)->rlock);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 2 locks held by tc/3932:
  #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife]
  #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]

 stack backtrace:
 CPU: 3 PID: 3932 Comm: tc Tainted: G            E     4.17.0-rc4.kasan+ #417
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 Call Trace:
  dump_stack+0x9a/0xeb
  __lock_acquire+0xf43/0x34a0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? debug_check_no_locks_freed+0x2b0/0x2b0
  ? __mutex_lock+0x62f/0x1240
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  ? lock_acquire+0x10b/0x330
  lock_acquire+0x10b/0x330
  ? tcf_ife_cleanup+0x19/0x80 [act_ife]
  _raw_spin_lock_bh+0x38/0x70
  ? tcf_ife_cleanup+0x19/0x80 [act_ife]
  tcf_ife_cleanup+0x19/0x80 [act_ife]
  __tcf_idr_release+0xff/0x350
  tcf_ife_init+0xdde/0x13c0 [act_ife]
  ? ife_exit_net+0x290/0x290 [act_ife]
  ? __lock_is_held+0xb4/0x140
  tcf_action_init_1+0x67b/0xad0
  ? tcf_action_dump_old+0xa0/0xa0
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? memset+0x1f/0x40
  tcf_action_init+0x30f/0x590
  ? tcf_action_init_1+0xad0/0xad0
  ? memset+0x1f/0x40
  tc_ctl_action+0x48e/0x5e0
  ? mutex_lock_io_nested+0x1160/0x1160
  ? tca_action_gd+0x990/0x990
  ? sched_clock+0x5/0x10
  ? find_held_lock+0x39/0x1d0
  rtnetlink_rcv_msg+0x4da/0x990
  ? validate_linkmsg+0x680/0x680
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  netlink_rcv_skb+0x127/0x350
  ? validate_linkmsg+0x680/0x680
  ? netlink_ack+0x970/0x970
  ? __kmalloc_node_track_caller+0x304/0x3a0
  netlink_unicast+0x40f/0x5d0
  ? netlink_attachskb+0x580/0x580
  ? _copy_from_iter_full+0x187/0x760
  ? import_iovec+0x90/0x390
  netlink_sendmsg+0x67f/0xb50
  ? netlink_unicast+0x5d0/0x5d0
  ? copy_msghdr_from_user+0x206/0x340
  ? netlink_unicast+0x5d0/0x5d0
  sock_sendmsg+0xb3/0xf0
  ___sys_sendmsg+0x60a/0x8b0
  ? copy_msghdr_from_user+0x340/0x340
  ? lock_downgrade+0x5e0/0x5e0
  ? tty_write_lock+0x18/0x50
  ? kvm_sched_clock_read+0x1a/0x30
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0x18/0x170
  ? find_held_lock+0x39/0x1d0
  ? lock_downgrade+0x5e0/0x5e0
  ? lock_acquire+0x10b/0x330
  ? __audit_syscall_entry+0x316/0x690
  ? current_kernel_time64+0x6b/0xd0
  ? __fget_light+0x55/0x1f0
  ? __sys_sendmsg+0xd2/0x170
  __sys_sendmsg+0xd2/0x170
  ? __ia32_sys_shutdown+0x70/0x70
  ? syscall_trace_enter+0x57a/0xd60
  ? rcu_read_lock_sched_held+0xdc/0x110
  ? __bpf_trace_sys_enter+0x10/0x10
  ? do_syscall_64+0x22/0x480
  do_syscall_64+0xa5/0x480
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 RIP: 0033:0x7fd646988ba0
 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0
 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003
 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000
 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100

Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding")
Fixes: ef6980b6 ("introduce IFE action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac:
Deduplicate bus_find_device() by name matching") and adds a comment
which should stop anyone from reintroducing the same "fix" in the future.

We can't use bus_find_device_by_name() here because the device name is
not guaranteed to be 'davinci_mdio'. On some systems it can be
'davinci_mdio.0' so we need to use strncmp() against the first part of
the string to correctly match it.

Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

if dev_get_valid_name failed, propagate its return code

and remove the setting err to ENODEV, it will be set to
0 again before dev_change_net_namespace exits.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In failure path, we overwrite err to what vnic_rq_disable() returns. In
case it returns 0, enic_open() returns success in case of error.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Fixes: e8588e26 ("enic: enable rq before updating rq descriptors")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups
need to fail if dev_match is not true. Currently, a packet to a given port
can match a socket bound to device when it should not. In the VRF case,
this causes the lookup to hit a VRF socket and not a global socket
resulting in a response trying to go through the VRF when it should not.

Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups")
Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups")
Reported-by: Lou Berger <lberger@labn.net>
Diagnosed-by: Renato Westphal <renato@opensourcerouting.org>
Tested-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

getnstimeofday64() is deprecated and getting replaced throughout
the kernel with ktime_get_*() based helpers for a more consistent
interface.

The two functions do the exact same thing, so this is just
a cosmetic change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported use after free that is caused by fib6_info being
freed without a proper RCU grace period.

CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 __read_once_size include/linux/compiler.h:188 [inline]
 find_rr_leaf net/ipv6/route.c:705 [inline]
 rt6_select net/ipv6/route.c:761 [inline]
 fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823
 ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856
 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082
 fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122
 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110
 ip6_route_output include/net/ip6_route.h:82 [inline]
 icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline]
 icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535
 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244
 dst_link_failure include/net/dst.h:427 [inline]
 ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695
 neigh_invalidate+0x246/0x550 net/core/neighbour.c:892
 neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:404
 exiting_irq arch/x86/include/asm/apic.h:527 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
 </IRQ>
RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482
Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48
RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0
RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000
R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0
R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00
 strlen include/linux/string.h:267 [inline]
 getname_kernel+0x24/0x370 fs/namei.c:218
 open_exec+0x17/0x70 fs/exec.c:882
 load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780
 search_binary_handler+0x17d/0x570 fs/exec.c:1653
 exec_binprm fs/exec.c:1695 [inline]
 __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819
 do_execveat_common fs/exec.c:1866 [inline]
 do_execve fs/exec.c:1883 [inline]
 __do_sys_execve fs/exec.c:1964 [inline]
 __se_sys_execve fs/exec.c:1959 [inline]
 __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f1576a46207
Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02
RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207
RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670
RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10
R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005

Allocated by task 12188:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
 kmalloc include/linux/slab.h:513 [inline]
 kzalloc include/linux/slab.h:706 [inline]
 fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152
 ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013
 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154
 ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660
 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
 sock_ioctl+0x30d/0x680 net/socket.c:1097
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 1402:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xd9/0x260 mm/slab.c:3813
 fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207
 fib6_info_release include/net/ip6_fib.h:286 [inline]
 __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline]
 ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316
 ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663
 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
 sock_ioctl+0x30d/0x680 net/socket.c:1097
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801b5df2580
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 8 bytes inside of
 256-byte region [ffff8801b5df2580, ffff8801b5df2680)
The buggy address belongs to the page:
page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0
raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
> ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                      ^
 ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb

Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Reported-by: syzbot+9e6d75e3edef427ee888@syzkaller.appspotmail.com
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sync both unicast and multicast lists instead of unicast twice.

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the fixes on team and bonding, this restores the ability
to set an ipvlan device's mtu to anything higher than 1500.

Fixes: 91572088 ("net: use core MTU range checking in core net infra")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The array bpq_eth_addr is only used to get the size of an
address, whereas the bcast_addr is used to set the broadcast
address. This leads to a warning when using clang:
drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not
      needed and will not be emitted [-Wunneeded-internal-declaration]
static char bpq_eth_addr[6];
            ^

Remove both variables and use the common eth_broadcast_addr
to set the broadcast address.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without
initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops
can be called when interface is down.

Move enic_rfs_flw_tbl_init to enic_probe.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
dump_stack+0x85/0xc0
register_lock_class+0x550/0x560
? __handle_mm_fault+0xa8b/0x1100
__lock_acquire+0x81/0x670
lock_acquire+0xb9/0x1e0
?  enic_get_rxnfc+0x139/0x2b0 [enic]
_raw_spin_lock_bh+0x38/0x80
? enic_get_rxnfc+0x139/0x2b0 [enic]
enic_get_rxnfc+0x139/0x2b0 [enic]
ethtool_get_rxnfc+0x8d/0x1c0
dev_ethtool+0x16c8/0x2400
? __mutex_lock+0x64d/0xa00
? dev_load+0x6a/0x150
dev_ioctl+0x253/0x4b0
sock_do_ioctl+0x9a/0x130
sock_ioctl+0x1af/0x350
do_vfs_ioctl+0x8e/0x670
? syscall_trace_enter+0x1e2/0x380
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5a/0x170
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joel Stanley says:

====================
Slience NCSI logging

v2:
  Fix indent issue and commit message based on Joe's feedback
  Add Sam's acks

Here are three changes to silence unnecessary warnings in the ncsi code.

The final patch adds Sam as the maintainer for NCSI.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Sam has been handing the maintenance of NCSI for a number release cycles
now.
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to
netdev_dbg.

As Joe explains:

> netdev_dbg is not included in object code unless
> DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.
> And then, it is not emitted into the log unless
> DEBUG is set or this specific netdev_dbg is enabled
> via the dynamic debug control file.

Which is what we're after in this case.
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This does not provide useful information. As the ncsi maintainer said:

 > either we get a channel or broadcom has gone out to lunch
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In normal operation we see this series of messages as the host drives
the network device:

 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up

This makes all of these messages netdev_dbg. They are still useful to
debug eg. misbehaving network device firmware, but we do not need them
filling up the kernel logs in normal operation.
Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start))
is clearly wrong since I40E_SKB_PAD already points to the offset where
the original xdp->data was sitting since xdp->data_hard_start is defined
as xdp->data - i40e_rx_offset(rx_ring) where latter offsets to I40E_SKB_PAD
when build skb is used.

However, also before cc5b114d ("bpf, i40e: add meta data support")
this seems broken since bpf_xdp_adjust_head() helper could have been used
to alter headroom and enlarge / shrink the frame and with that the assumption
that the xdp->data remains unchanged does not hold and would push a bogus
packet to upper stack.

ixgbe got this right in 92470808 ("ixgbe: add XDP support for pass and
drop actions"). In any case, fix it by removing the I40E_SKB_PAD from both
skb_reserve() and truesize calculation.

Fixes: cc5b114d ("bpf, i40e: add meta data support")
Fixes: 0c8493d9 ("i40e: add XDP support for pass and drop actions")
Reported-by: Keith Busch <keith.busch@linux.intel.com>
Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Tested-by: Keith Busch <keith.busch@linux.intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: Fix series.

The patch series fixes few issues in the qed/qede drivers.
Please consider applying this series to "net".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not advertise DCBX_LLD_MANAGED capability i.e., do not allow
external agent to manage the dcbx/lldp negotiation. MFW acts as lldp agent
for qed* devices, and no other lldp agent is allowed to coexist with mfw.

Also updated a debug print, to not to display the redundant info.

Fixes: a1d8d8a5 ("qed: Add dcbnl support.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid calling a SIMD fastpath handler if it is NULL. The check is needed
to handle an unlikely scenario where unsolicited interrupt is destined to
a PF in INTa mode.

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>