This updates the DRM via driver to the latest CVS version, which contains
support for DMA blitting.

It also contains some whitespace and other minor fixes

From: Thomas Hellstrom <unichrome@shipmail.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

From: Dave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>

Add PCI DMA blitengine to VIA DRM
Add portability code for porting VIA to FreeBSD.
Sync via_drm.h with 3d driver

From: Thomas Hellstrom <unichrome@shipmail.org>, Eric Anholt <anholt@freebsd.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Alan Hourihane wants to set MTRR in the DDX only as otherwise
we get problems with the shared memory chipset.

From: Alan Hourihane <alanh@fairlite.demon.co.uk>
Signed-off-by: Dave Airlie <airlied@linux.ie>

The MGA driver needs to use the full AGP interface.

From: Ian Romanick <idr@us.ibm.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Modules should go via the new drm_agp_ functions.
Signed-off-by: Dave Airlie <airlied@linux.ie>

Allow DRM modules to call AGP internally in the kernel.

From: Ian Romanick <idr@us.ibm.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>

This simplifies the sysfs code for the drm and add a dri_library_name
attribute which can be used by a userspace app to figure out which
library to load.

From: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Dave Airlie <airlied@linux.ie>

drm_flush is no longer needed remove.
Signed-off-by: Dave Airlie <airlied@linux.ie>

Remove the linux includes from via_ds.c
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Dave Airlie <airlied@linux.ie>

Move drm_cpu_valid into drm_fops.c
Signed-off-by: Dave Airlie <airlied@linux.ie>

Rename the driver hooks in the DRM to something a little more understandable:
preinit         ->      load
postinit        ->      (removed)
presetup        ->      firstopen
postsetup       ->      (removed)
open_helper     ->      open
prerelease      ->      preclose
free_filp_priv  ->      postclose
pretakedown     ->      lastclose
postcleanup     ->      unload
release         ->      reclaim_buffers_locked
version         ->      (removed)

postinit and version were replaced with generic code in the Linux DRM (drivers
now set their version numbers and description in the driver structure, like on
BSD).  postsetup wasn't used at all.  Fixes the savage hooks for
initializing and tearing down mappings at the right times.  Testing involved at
least starting X, running glxgears, killing glxgears, exiting X, and repeating.

Tested on:      FreeBSD (g200, g400, r200, r128)
                Linux (r200, savage4)

From: Eric Anholt <anholt@freebsd.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

If the call to xprt_transmit() fails due to socket buffer space
exhaustion, we do not need to re-encode the RPC message when we
loop back through call_transmit.

Re-encoding can actually end up triggering the WARN_ON() in
call_decode() if we re-encode something like a read() request and
auth->au_rslack has changed.
It can also cause us to increment the RPCSEC_GSS sequence number
beyond the limits of the allowed window.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The generic netlink family builds on top of netlink and provides
simplifies access for the less demanding netlink users. It solves
the problem of protocol numbers running out by introducing a so
called controller taking care of id management and name resolving.

Generic netlink modules register themself after filling out their
id card (struct genl_family), after successful registration the
modules are able to register callbacks to command numbers by
filling out a struct genl_ops and calling genl_register_op(). The
registered callbacks are invoked with attributes parsed making
life of simple modules a lot easier.

Although generic netlink modules can request static identifiers,
it is recommended to use GENL_ID_GENERATE and to let the controller
assign a unique identifier to the module. Userspace applications
will then ask the controller and lookup the idenfier by the module
name.

Due to the current multicast implementation of netlink, the number
of generic netlink modules is restricted to 1024 to avoid wasting
memory for the per socket multiacst subscription bitmask.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduces netlink_run_queue() to handle the receive queue of
a netlink socket in a generic way. Processes as much as there
was in the queue upon entry and invokes a callback function
for each netlink message found. The callback function may
refuse a message by returning a negative error code but setting
the error pointer to 0 in which case netlink_run_queue() will
return with a qlen != 0.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most netlink families make no use of the done() callback, making
it optional gets rid of all unnecessary dummy implementations.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduces a new type-safe interface for netlink message and
attributes handling. The interface is fully binary compatible
with the old interface towards userspace. Besides type safety,
this interface features attribute validation capabilities,
simplified message contstruction, and documentation.

The resulting netlink code should be smaller, less error prone
and easier to understand.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing connection tracking subsystem in netfilter can only
handle ipv4.  There were basically two choices present to add
connection tracking support for ipv6.  We could either duplicate all
of the ipv4 connection tracking code into an ipv6 counterpart, or (the
choice taken by these patches) we could design a generic layer that
could handle both ipv4 and ipv6 and thus requiring only one sub-protocol
(TCP, UDP, etc.) connection tracking helper module to be written.

In fact nf_conntrack is capable of working with any layer 3
protocol.

The existing ipv4 specific conntrack code could also not deal
with the pecularities of doing connection tracking on ipv6,
which is also cured here.  For example, these issues include:

1) ICMPv6 handling, which is used for neighbour discovery in
   ipv6 thus some messages such as these should not participate
   in connection tracking since effectively they are like ARP
   messages

2) fragmentation must be handled differently in ipv6, because
   the simplistic "defrag, connection track and NAT, refrag"
   (which the existing ipv4 connection tracking does) approach simply
   isn't feasible in ipv6

3) ipv6 extension header parsing must occur at the correct spots
   before and after connection tracking decisions, and there were
   no provisions for this in the existing connection tracking
   design

4) ipv6 has no need for stateful NAT

The ipv4 specific conntrack layer is kept around, until all of
the ipv4 specific conntrack helpers are ported over to nf_conntrack
and it is feature complete.  Once that occurs, the old conntrack
stuff will get placed into the feature-removal-schedule and we will
fully kill it off 6 months later.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

- Re-add a hunk lost during merge: ppc64 is missing the hunk that disables
  preempt on the secondary CPUs before they call cpu_idle().

- ppc's cpu_idle() had the need_resched() test wrong.

Cc: Nick Piggin <nickpiggin@yahoo.com.au>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

recalc_task_prio() is called from activate_task() to calculate dynamic
priority and interactive credit for the activating task.  For real-time
scheduling process, all that dynamic calculation is thrown away at the end
because rt priority is fixed.  Patch to optimize recalc_task_prio() away
for rt processes.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <piggin@cyberone.com.au>
Cc: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The problem (eject not working on ATAPI LS-120 drive) is caused by
idefloppy_ioctl() function which *first* tries generic_ide_ioctl()
and *only* if it fails with -EINVAL, proceeds with the specific ioctls.
The generic eject command fails with something other than -EINVAL
and the specific one is never executed.

This patch fixes it by first going through the internal ioctls
and only trying generic_ide_ioctl() if none of them matches.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The siimage driver proports to support the Adaptec SA-1210 SATA
controller.  However, at least some of those cards boot-up with their
interrupts disabled internally.  The siimage driver currently ignores
that fact, so that driver does not actually work with those cards.
This patch enables those interrupts on cards that need it.

[ This is implemented based on similar code in the libata-based
  sata_sil driver. ]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Matthew Wilcox asked that this got a comment explaining why it is done
so here it is.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Jaya Kumar <jayakumar.ide@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

AGP shouldn't use "global_flush_tlb()" to flush the AGP mappings, that i
spurely an x86'ism.  The proper AGP mapping flusher that should be used
is "flush_agp_mappings()", which on x86 obviously happens to do a global
TLB flush.

This makes AGP (or at least the config _I_ happen to use) compile again
on ppc64.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: "Jordan Crouse" <jordan.crouse@amd.com>

The core IDE engine on the CS5536 is the same as the other AMD southbridges,
so unlike the CS5535, we can simply add the appropriate PCI headers to
the existing amd74xx code.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch started life as a response to fedora specific ide subsystem changes
that made error handling of my ATAPI tape drive fail; the specifics are in

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=160868

The insertion of the statement rq->errors = err; near the end of
ide_end_drive_cmd() in drivers/ide/ide-io.c means that rq->errors does not
contain what it needs to in idescsi_end_request() in drivers/scsi/ide-scsi.c
anymore. Recent mainline kernels now also have this change.

The patch below makes ide-scsi whole.
Signed-off-by: Willem Riede <wrlk@riede.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch contains the following possible cleanups:
- pci/cy82c693.c: make a needlessly global function static
- remove the following unneeded EXPORT_SYMBOL's:
  - ide-taskfile.c: do_rw_taskfile
  - ide-iops.c: default_hwif_iops
  - ide-iops.c: default_hwif_transport
  - ide-iops.c: wait_for_ready
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

CONFIG_IDE_MAX_HWIFS is a generic thing, no need to have it duplicated
by every arch that uses it.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Devices driven by ide-cs will appear under /sys/devices instead of the
appropriate PCMCIA device. To fix this I had to extend the hw_regs_t
structure with a 'struct device' field, which allows us to set the
parent link for the appropriate hwif.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@suse.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>