- 09 Jan, 2006 40 commits
-
-
Knut Petersen authored
This is a major update to the cyblafb framebuffer driver. Most of the stuff has been tested in the mm tree. Main advantages: ============ - vxres > xres support - ywrap and xpan support - much faster for almost all modes (e.g. 1280x1024-16bpp draws more than 41 full screens of text instead of about 25 full screens of text per second on authors Epia 5000) - module init/exit code fixed - bugs triggered by console rotation fixed - lots of minor improvements - startup modes suitable for high performance scrolling in all directions This diff also contains a lot of white space fixes. No side effects are possible, only one single graphics core is affected. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Kirill Korotaev authored
Fixed oops after failed netlink socket creation. Wrong parathenses in if() statement caused err to be 1, instead of negative value. Trivial fix, not trivial to find though. Signed-Off-By: Dmitry Mishin <dim@sw.ru> Signed-Off-By: Kirill Korotaev <dev@openvz.org> Signed-Off-By: Linus Torvalds <torvalds@osdl.org>
-
Oleg Nesterov authored
__rcu_pending() is rather fat and called twice from rcu_pending(). rcu_pending() has multiple callers, and not that small too. This patch uninlines both of them. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
Manual merge for trivial #include changes
-
Dan Williams authored
This patch allows ipw2100 driver to advertise the WPA-related encryption options that it does really support. It's necessary to work correctly with NetworkManager and other programs that actually check driver & card capabilities. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Denis Vlasenko authored
These warnings are emitted if non-modular network drivers are built. Fixes just move cleanup_card() definitions into #ifdef MODULE region. /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/wd.c:131: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/3c503.c:152: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ne.c:216: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp.c:106: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/hp-plus.c:142: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/smc-ultra.c:172: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/e2100.c:144: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/es3210.c:159: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lne390.c:149: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/lance.c:313: warning: 'cleanup_card' defined but not used /.1/usr/srcdevel/kernel/linux-2.6.15-rc7.src/drivers/net/ac3200.c:127: warning: 'cleanup_card' defined but not used Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ayaz Abdulla authored
This contains a bug fix for large buffers. Originally, if a tx buffer to be sent was larger then the maximum size of the tx descriptor, it would overwrite other control bits. In this patch, the buffer is split over multiple descriptors. Also, the fragments are now setup in forward order. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Olaf Hering authored
Remove bouncing mail address of mv643xx maintainer. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Kenji Kaneshige authored
Fix an invalid memory reference in the e1000 driver which would cause kernel panic. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Jeb Cramer <cramerj@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Adrian Bunk authored
"extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Adrian Bunk authored
"extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Adrian Bunk authored
This patch fixes a wrong indentation. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Franck authored
Add MIPS dependency for dm9000 ethernet controller. Indeed this controller is used by some embedded platforms based on MIPS CPUs. Signed-off-by: Franck Bui-Huu <franck.bui@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Eric Paris authored
ifenslave, as of abi version 2, does not set the ip address on the slave interfaces. The documentation example however still shows that the ensalved interfaces should have the same IP as the master. The patch simply removes the lines from the example which should no longer appear. Signed-off-by: Eric Paris <eparis@redhat.com> bonding.txt | 2 -- 1 files changed, 2 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Christoph Dworzak authored
A BIOS bug affecting some multiport tulip NICs requires an irq fixup in tulip_core.c. This has only been enabled for i686, but it is needed for x86_64 as well. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Andrew Chew authored
This patch works around a problem with spurious interrupts seen at boot time when a MAXTOR 6H500F0 drive is present. An ATA interrupt condition is mysteriously present at start of day. If we took too long in issuing the first command, the kernel would basically get tired of the spurious interrupts and turn the interrupt off. Issuing the first command essentially causes the interrupt condition to get acknowledged. I haven't seen this happen with any other drives. What I basically do is ack ATA status by reading it regardless of whether we're expecting to have to handle an interrupt. This clears the start-of-day anomalous interrupt condition, and keeps the kernel from disabling that interrupt due to too many spurious interrupts. Also, I fixed a bug where hotplug interrupts weren't getting acknowledged as handled in the ISR. This was not the cause of the spurious interrupts, but it's the right thing to do anyway. Signed-Off-By: Andrew Chew Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Eugene Surovegin authored
Disable TX status deferral (EMACx_MR[MWSW=001]) in half-duplex mode. I have two reports when EMAC stops transmitting when connected to a hub. TX ring debug printouts show complete mess when this happens, probably hardware collision handling doesn't work quite well in this mode. This is relevant only for SoCs with EMAC4 core (440GX, 440SP, 440SPe). Tested on 440GX. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Johannes Berg authored
This patch fixes some of the ieee80211 crypto related code so that instead of having the host fully do crypto operations, the host_build_iv flag works properly (for WEP in this patch) which, if turned on, requires the hardware to do all crypto operations, but the ieee80211 layer builds the IV. The hardware also has to build the ICV. Previously, the host_build_iv flag couldn't be used at all for WEP, and not alone (with both host_decrypt and host_encrypt disabled) because the crypto algorithm wasn't assigned. This is also fixed. I have tested this patch both in host crypto mode and in hw crypto mode (with the Broadcom chipset). [resent, signing digitally caused it to be MIME-junked, sorry] Signed-Off-By: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Don't enable the pci device twice (already done in the probe routine). Propogate the error codes from pci_request_region back to initial probing. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
The sk98lin driver doesn't do proper error number handling during initialization. Note: -EAGAIN is a bogus return value for hardware errors. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Trivial use of kzalloc. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Sk98lin driver error recovery on two port boards is bad. If it fails the second allocation, it will not release resources properly. Also it registers the second port in the pci driver data If second port fails, might as well go with one port. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Sk98lin 64bit memory handling is wrong. It doesn't set the highdma flag; i.e. the kernel always does bounce buffers. It doesn't fallback to 32 bit mask if it can't get 64 bit mask. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Stephen Hemminger authored
Sk98lin driver has a routine marked __init that is called from the probe code. If using pci hotplug, this could be called after the initialization so it needs to be marked __devinit. So if you hot added a sk98lin board, the kernel would crash. I don't have hot plug hardware to actually try this feat. Also, there are two routines, only called from SkGeBoardInit that can be marked __devinit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jens Axboe authored
Signed-off-by: Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
This patch makes IDE use the new blk_complete_request() interface. There's still room for improvement, as __ide_end_request() really could drop the lock after getting HWGROUP->rq (why does it need to hold it in the first place? If ->rq access isn't serialized, we are screwed anyways). Signed-off-by: Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
This patch moves the SCSI softirq handling to the block layer version. There should be no functional changes. Signed-off-by: Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
Request completion can be a quite heavy process, since it needs to iterate through the entire request and complete the bio's it holds. This patch adds blk_complete_request() which moves this processing into a dedicated block softirq. Signed-off-by: Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
It's a broken interface, it's done way too late. And apparently it triggers slab problems in recent kernels as well (most likely after the generic dispatch code was merged). So kill it, ide-cd is the only user of it. Signed-off-by: Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
Signed-off-by: Jens Axboe <axboe@suse.de>
-
Jens Axboe authored
For SG_IO requests, bio->bi_bdev may not be explicitly initialized. So make bio_init() clear the field to make sure it's always NULL or valid. Signed-off-by: Jens Axboe <axboe@suse.de>
-
Coywolf Qi Hunt authored
elv_try_last_merge(). Signed-off-by: Coywolf Qi Hunt <qiyong@fc-cn.com> Signed-off-by: Jens Axboe <axboe@suse.de>
-
Nicolas Kaiser authored
linux/blkdev.h included twice Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Jens Axboe <axboe@suse.de>
-
Matt Mackall authored
This adds an option to remove vm86 support under CONFIG_EMBEDDED. Saves about 5k. This version eliminates most of the #ifdefs of the previous version and instead uses function stubs in vm86.h. Also, release_vm86_irqs is moved from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs can live together. $ size vmlinux-baseline vmlinux-novm86 text data bss dec hex filename 2920821 523232 190652 3634705 377611 vmlinux-baseline 2916268 523100 190492 3629860 376324 vmlinux-novm86 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Mackall authored
configurable support for ELF core dumps text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3325552 528912 190556 4045020 3db8dc vmlinux-no-elf add/remove: 0/8 grow/shrink: 0/0 up/down: 0/-4424 (-4424) function old new delta fill_note 32 - -32 maydump 58 - -58 dump_seek 67 - -67 writenote 180 - -180 elf_dump_thread_status 274 - -274 fill_psinfo 308 - -308 fill_prstatus 466 - -466 elf_core_dump 3039 - -3039 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Mackall authored
Configurable 16-bit UID and friends support This allows turning off the legacy 16 bit UID interfaces on embedded platforms. text data bss dec hex filename 3330172 529036 190556 4049764 3dcb64 vmlinux-baseline 3328268 529040 190556 4047864 3dc3f8 vmlinux From: Adrian Bunk <bunk@stusta.de> UID16 was accidentially disabled for !EMBEDDED. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Mackall authored
This adds configurable support for doublefault reporting on x86 add/remove: 0/3 grow/shrink: 0/1 up/down: 0/-13048 (-13048) function old new delta cpu_init 846 786 -60 doublefault_fn 188 - -188 doublefault_stack 4096 - -4096 doublefault_tss 8704 - -8704 Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-