- 16 Nov, 2016 40 commits
-
-
Laurent Pinchart authored
The menu control selects the operation mode of a video deinterlacer. The menu entries are driver specific. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran@bingham.xyz> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Peter Ujfalusi authored
When requesting the DMA channel it was mandatory that we do not have DMA resource nor valid DMA channel via DT. In this case the dma_request_slave_channel_compat() would fall back and request any channel with SW trigger. The same can be achieved with the dma_request_chan_by_mask() without the misleading use of the DMAengine API - implying that the omap3isp does need to have DMA resource or valid dma binding in DT. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
When parsing the graph the driver loops over all endpoints using of_graph_get_next_endpoint(). The function handles reference counting of the passed and returned nodes, so the returned node's reference count must not be decreased manually in the normal path. Move the offending of_node_put() call to the error path that requires manual reference count handling. Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Philipp Zabel authored
The Rift CV1 Sensor has bInterfaceClass set to vendor specific, so we need an entry in uvc_ids to probe it. Just as the Rift DK2 IR tracker, it misreports the pixel format as YUYV instead of Y8. The sensor is configured with a low exposure time and high black level by default, so that only bright IR sources can be seen. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The CEC_LOG_ADDRS_FL_CDC_ONLY flag is missing at the documentation, causing this warning: Documentation/output/cec.h.rst:6: WARNING: undefined label: cec-log-addrs-fl-cdc-only (if the link has no caption the label must precede a section header) Add a documentation for it, based on the commit that introduced the flag. Fixes: a69a168a ("[media] cec: add proper support for CDC-Only CEC devices") Signed-off-by:
-
Hans Verkuil authored
Make sure the TX counters are zeroed in the cec_msg struct. Non-zero TX counters make no sense when a message is received, and applications should not see non-zero values here. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
The cec framework and the pulse8-cec driver have been moved out of staging, so update the MAINTAINERS paths. Signed-off-by:
-
Hans Verkuil authored
Update the TODOs explaining why these two drivers remain in staging. The reason is that these drivers rely on userspace to set the physical address, but that should come from the HDMI output driver. This in turn needs the upcoming HDMI notifier framework. Signed-off-by:
-
Hans Verkuil authored
Now that the CEC framework has been moved out of staging and into the mainline kernel we can do the same for the pulse8-cec driver. Signed-off-by:
-
Hans Verkuil authored
An inner for-loop reused the outer loop variable. This was only noticeable with CEC adapters supporting more than one logical address. Signed-off-by:
-
Hans Verkuil authored
Replace bool by int or __u8 (when used in a struct). Signed-off-by:
-
Hans Verkuil authored
The CEC_MSG_FL_REPLY_TO_FOLLOWERS message flag only makes sense for transmitted messages where you want to wait for the reply. Clear the flag in all other cases. Signed-off-by:
-
Hans Verkuil authored
The last open issues have been addressed, so it is time to move this out of staging and into the mainline and to move the public cec headers to include/uapi/linux. Signed-off-by:
-
Hans Verkuil authored
CDC-Only CEC devices are CEC devices that can only handle CDC messages, all other messages are ignored. Add a flag to signal that this is a CDC-Only device and act accordingly. Also add helper functions to identify if a CEC device is configured as a CDC-Only device, a second TV, a switch or a processor, since these variations cannot be determined by the logical address alone. Signed-off-by:
-
Hans Verkuil authored
The CEC_MSG_INITIATE_ARC message is special since it is the ONLY CEC message that accepts two possible valid replies: CEC_MSG_REPORT_ARC_INITIATED and CEC_MSG_REPORT_ARC_TERMINATED. So if the transmitted message is CEC_MSG_INITIATE_ARC and the remote side replied with CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED, then a msg->reply value of CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED will match either reply. I thought about either adding a second reply2 field, but that's ugly for all other messages that have only one reply, and what if in the future a new message is added that can have three replies? Another option would be to add a cec_msg flag, but really, the combination of CEC_MSG_REPORT_ARC_INITIATED and a reply value of one of the two possible replies already functions as a flag. Another advantage of this approach is that it is safe to re-use a cec_msg struct. No need to zero a flags field or a reply2 field. So since this really is an exception in the CEC specification, I decided to implement it as an exception as well. Signed-off-by:
-
Hans Verkuil authored
As per the CEC specification: - CEC messages with a too-small payload should be ignored. - Broadcast messages that are only allowed as directed messages should be ignored. - Directed messages that are only allowed as broadcast messages should be ignored. Implement this in the core CEC framework. Signed-off-by:
-
Hans Verkuil authored
Give the caller more control over how replies to a transmit are handled. By default the reply will only go to the filehandle that called CEC_TRANSMIT. If this new flag is set, then the reply will also go to all followers. Signed-off-by:
-
Hans Verkuil authored
By default the CEC_MSG_USER_CONTROL_PRESSED/RELEASED messages are passed on to the follower(s) only. If the new CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag is set in the flags field of struct cec_log_addrs then these messages are also passed on to the remote control input subsystem and they will appear as keystrokes. This used to be the default behavior, but now you have to explicitly enable it. This is done to force the caller to think about possible security issues (e.g. if these messages are used to enter passwords). Signed-off-by:
-
Hans Verkuil authored
This uses Laurent's python script to convert all tables, dropping the useless 'row' comments. See commit c2b66caf ("[media] v4l: doc: Remove row numbers from tables") for the script that was used. Signed-off-by:
-
Hans Verkuil authored
When the persistent state is restored, the all_device_types field was never filled in. Fix this. Signed-off-by:
-
Hans Verkuil authored
The vmr_stat variable was filled with the contents of the control register, not the status register. Classic copy-and-paste error. Signed-off-by:
-
Wu-Cheng Li authored
vb2_qbuf will check the buffer index. If a driver overrides vidioc_qbuf and use the buffer index, the driver needs to check the index. Signed-off-by:
Wu-Cheng Li <wuchengli@chromium.org> Signed-off-by:
-
Hans Verkuil authored
The code examples on how to enumerate controls were really long in the tooth. Update them. Using FLAG_NEXT_CTRL is preferred these days, so give that example first. Signed-off-by:
-
Hans Verkuil authored
Improve the internal CEC documentation. In particular add a section that specifies that transmit-related interrupts should be processed before receive interrupts. Signed-off-by:
-
Markus Elfring authored
Use a direct assignment for an array element which can be set over the pointer variable "inp" instead of calling the function "memcpy" here. Suggested-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
* A function was called over the pointer "setup_if_config" in the data structure "venc_platform_data". But the return value was not used so far. Thus assign it to the local variable "ret" which will be checked with the next statement. Fixes: 9a7f95ad ("[media] davinci vpbe: add dm365 VPBE display driver changes") * Pass a value to this function call without storing it in an intermediate variable before. * Delete the local variable "if_params" which became unnecessary with this refactoring. Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Maninder Singh authored
This patch fixes the following checkpatch.pl error: ERROR: Macros with complex values should be enclosed in parentheses Signed-off-by:
Maninder Singh <maninder.s2@samsung.com> Acked-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Obtain the correct timings based on the VIC code from the AVI InfoFrame. It does a sanity check to see if at least the measured width and height are in line with what the VIC code reports. If not, then use the timings instead of the VIC code (as per the CEA-861 spec). Signed-off-by:
-
Hans Verkuil authored
Now that the timings contain picture aspect ratio information, we can support cropcap to return the pixel aspect ratio. Signed-off-by:
-
Hans Verkuil authored
Add a helper to find timings based on the CEA-861 VIC code. Also, add a helper that returns the pixel aspect ratio based on the v4l2_dv_timings struct. [mchehab@s-opensource.com: fix coding style] Signed-off-by:
-
Hans Verkuil authored
Add the CEA-861 VIC, the HDMI VIC and the picture aspect ratio information where applicable. Signed-off-by:
-
Hans Verkuil authored
Document the new flags. Signed-off-by:
-
Hans Verkuil authored
Add picture aspect ratio information, the CEA-861 VIC (Video Identification Code) and the HDMI VIC to struct v4l2_bt_timings. The picture aspect was chosen rather than the pixel aspect since 1) the CEA-861 standard uses picture aspect, and 2) pixel aspect ratio can become tricky when dealing with pixel repeat timings. While we don't support those yet at the moment, this might become necessary. And in that case using picture aspect ratio makes more sense. And converting picture aspect ratio to pixel aspect ratio is easy enough. Signed-off-by:
-
Hans Verkuil authored
Format comments according to what checkpatch wants. No other changes. Signed-off-by:
-
Jonathan Sims authored
This is a reworking of a patch originally submitted by Ryley Angus, modified by Hans Verkuil and then seemingly forgotten before changes suggested by Keith Pyle here: http://www.mail-archive.com/linux-media@vger.kernel.org/msg75163.html were made and tested. I have implemented the suggested changes and have been testing for the last 2 months. I am no longer experiencing lockups while recording (with blue light on, requiring power cycling) which had been a long standing problem with the HD-PVR. I have not noticed any other problems since applying the patch. Signed-off-by:
Jonathan Sims <jonathan.625266@earthlink.net> Reported-by:
Ryley Angus <ryleyjangus@gmail.com> Signed-off-by:
-
Sakari Ailus authored
Memory-to-memory V4L2 devices all have file handle specific context. Say this in the API documentation so that the user space may rely on it being the case. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
The second check for an error on hva->lmi_err_reg appears to be a copy-and-paste error, it should be hva->emi_err_reg instead. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Jean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by:
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Fengguang Wu authored
drivers/media/platform/mtk-mdp/mtk_mdp_core.c:284:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
