- 21 Sep, 2018 2 commits
-
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Joonas Lahtinen authored
Signed-off-by:
-
- 20 Sep, 2018 8 commits
-
-
Chris Wilson authored
Fix up the error unwind for logical_ring_init() failing by moving the cleanup into the callers who own the various bits of state during initialisation, so we don't forget to free the state allocated by the caller. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920195948.16448-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Once we have flushed the first request through the system to both load a context and record the default state; tell the GPU to park and idle itself, putting itself immediately (hopefully at least) into a powersaving state, and allowing ourselves to start from known state after setting up all our bookkeeping. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920161343.1117-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
As we emit requests or touch HW directly for some of the live tests, the requirement is that we hold the rpm wakeref before doing so. We want a mix of granularity since we will want to test runtime suspend, so try to mark up only the critical sections where we need rpm for the live test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108002Signed-off-by:
-
Matthew Auld authored
It really wants dev_priv anyway, also now matches i915_gem_init_stolen. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Matthew Auld authored
If we copy all the contents of the sg across and not just the page link, we can then also put it to work in fake_get_huge_pages and beyond. Signed-off-by:
-
Chris Wilson authored
Stolen memory is lost across S4 (hibernate) or S3-RST as it is a portion of ordinary volatile RAM. As we allocate our rings from stolen, this may include the rings used for our preempt context and their breadcrumb instructions. In order to allow preemption following hibernation and loss of stolen memory, we therefore need to repopulate the instructions inside the lost ring upon resume. To handle both module load and resume, we simply defer constructing the ring to first use. Testcase: igt/drv_selftest/live_gem Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919205432.18394-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We need to exercise the HW and submission paths for switching contexts rapidly to check that features such as execlists' wa_tail are adequate. Plus it's an interesting baseline latency metric. v2: Check the initial request for allocation errors v3: Use finite waits for more robust handling of broken code Signed-off-by:
-
Chris Wilson authored
Remember to release the batch bo reference if we hit an error trying to submit our MI_STORE_DWORD_IMM. References: https://bugs.freedesktop.org/show_bug.cgi?id=107979Signed-off-by:
-
- 18 Sep, 2018 4 commits
-
-
Dhinakaran Pandiyan authored
PSR requires AUX IO power well to be enabled. This was already in place for CNL, extend this for ICL too. Not enabling the power well results in the aux error interrupts when the hardware exits PSR. Reported-by:
Casey G Bowman <casey.g.bowman@intel.com> Reported-by:
Jyoti R Yadav <jyoti.r.yadav@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Jyoti R Yadav <jyoti.r.yadav@intel.com> Cc: Casey G Bowman <casey.g.bowman@intel.com> Tested-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180914001822.2503-1-dhinakaran.pandiyan@intel.com
-
Ville Syrjälä authored
SDVO encoders can have multiple different types of outputs hanging off them. Currently the code tries to muck around with various is_foo flags in the encoder to figure out which type its driving. That doesn't work with atomic and other stuff, so let's nuke those flags and just look at which type of connector we're actually dealing with. The is_hdmi we'll need as that's not discoverable via the output flags, but we'll just move it under the connector. We'll also move the sdvo fixed mode handling out from the .get_modes() hook into the sdvo lvds init function so that we can bail out properly if there is no fixed mode to be found. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180917151504.8754-1-ville.syrjala@linux.intel.comReviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
Smatch reports: ../drivers/gpu/drm/i915/intel_sprite.c:1192 skl_plane_check_fb() warn: was || intended here instead of &&? Obviously smatch is correct here since we're trying to check if we're using either of the ccs modifiers. Since we now have is_ccs_modifier() let's use it to fix this. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: José Roberto de Souza <jose.souza@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: e21c2d33 ("drm/i915: Move skl plane fb related checks into a better place") Signed-off-by:
-
Ville Syrjälä authored
Clean up some cases where we're dealing with GTT pages instead of system pages to use I915_GTT_PAGE_SIZE instead of PAGE_SHIT. So just replace the the shifts with mul/div as appropriate. These are the easy ones, the rest probably need some actual thought. No real changes in the generated asm. Only gen8_ppgtt_insert_4lvl() was affected as gcc decided to do the following change: - be9: 89 d9 mov %ebx,%ecx - beb: c1 e1 0c shl $0xc,%ecx - bee: 48 63 c9 movslq %ecx,%rcx + be9: 48 63 cb movslq %ebx,%rcx + bec: 48 c1 e1 0c shl $0xc,%rcx and that then shifted a bunch of the offset by one byte. I presume the sign extensions in the asm are due to integer promotions from u16 etc. Hopefully someone has confirmed that those don't end up doing the wrong thing for us. Signed-off-by:
-
- 14 Sep, 2018 9 commits
-
-
Chris Wilson authored
If we fail to allocate an array for a large number of user requested capture objects, reduce the array size and try to grab at least some of the objects! Signed-off-by:
-
Chris Wilson authored
The prior assumption was that we did not need to reset the CSB on wedging when cancelling the outstanding requests as it would be cleaned up in the subsequent reset prior to restarting the GPU. However, what was not accounted for was that in preparing for the reset, we would try to process the outstanding CSB entries. If the GPU happened to complete a CS event just as we were performing the cancellation of requests, that event would be kept in the CSB until the reset -- but our bookkeeping was cleared, causing confusion when trying to complete the CS event. v2: Use a sanitize on unwedge to avoid interfering with eio suspend (where we intentionally disable GPU reset). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107925Signed-off-by:
-
Chris Wilson authored
If an asynchronous wait on a foriegn fence, we print a warning indicating which fence was not signaled. As i915_sw_fences become more common, include the debug hint (the symbol-name of the target) to help identify the waiter. E.g. [ 31.968144] Asynchronous wait on fence sw_sync:gem_eio:1 timed out (hint:submit_notify [i915]) We also want to downgrade from a warning to a notice (normal but significant condition) as the timeout is imposed and controlled by the caller (i.e. it is deliberate) and can be provoked by userspace. Signed-off-by:
-
Chris Wilson authored
That we use a WB mapping for updating the RING_TAIL register inside the context image even on !llc machines has been a source of consternation for every reader. It appears to work on bsw+, but it may just have been that we have been incredibly bad at detecting the errors. v2: With extra enthusiasm. v3: Drop force of map type for pinned default_state as by the time we pin it, the map type is always WB and doesn't conflict with the earlier use by ce->state. v4: Transfer engine->default_state from MAP_WC to MAP_WB on creation so we do not need the MAP_FORCE littered around the backends Signed-off-by:
-
Chris Wilson authored
Check we can indeed acquire a WB mapping of the context image on module load. Later this will give us the opportunity to validate that we can switch from WC to WB as required. Signed-off-by:
-
Chris Wilson authored
Now that we reload both RING_HEAD and RING_TAIL when rebinding the context, we do not need to scrub those registers immediately on resume. v2: Handle the perma-pinned contexts. v3: Set RING_TAIL on context-pin so that we always have known state in the context image for the ring registers and all parties have similar code (ripe for refactoring). Signed-off-by:
-
Chris Wilson authored
In order to reduce latency when checking for idle we kick the tasklet directly. Sometimes this is not enough as it is queued on another cpu and so to improve the accuracy of this idle-check (and so to reduce latency overall by avoiding another pass, or worse declaring a timeout!) wait for the tasklet to complete. References: https://bugs.freedesktop.org/show_bug.cgi?id=107916Signed-off-by:
-
Chris Wilson authored
If we try and fail to allocate a i915_request, we apply some backpressure on the clients to throttle the memory allocations coming from i915.ko. Currently, we wait until completely idle, but this is far too heavy and leads to some situations where the only escape is to declare a client hung and reset the GPU. The intent is to only ratelimit the allocation requests and to allow ourselves to recycle requests and memory from any long queues built up by a client hog. Although the system memory is inherently a global resources, we don't want to overly penalize an unlucky client to pay the price of reaping a hog. To reduce the influence of one client on another, we can instead of waiting for the entire GPU to idle, impose a barrier on the local client. (One end goal for request allocation is for scalability to many concurrent allocators; simultaneous execbufs.) To prevent ourselves from getting caught out by long running requests (requests that may never finish without userspace intervention, whom we are blocking) we need to impose a finite timeout, ideally shorter than hangcheck. A long time ago Paul McKenney suggested that RCU users should ratelimit themselves using judicious use of cond_synchronize_rcu(). This gives us the opportunity to reduce our indefinite wait for the GPU to idle to a wait for the RCU grace period of the previous allocation along this timeline to expire, satisfying both the local and finite properties we desire for our ratelimiting. There are still a few global steps (reclaim not least amongst those!) when we exhaust the immediate slab pool, at least now the wait is itself decoupled from struct_mutex for our glorious highly parallel future! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106680Signed-off-by:
-
Chris Wilson authored
For finding the panel fitter and PLL for a particular modeset is a part of that modeset and should be included with the reset of the DRM_DEBUG_KMS. Signed-off-by:
-
- 13 Sep, 2018 9 commits
-
-
Mahesh Kumar authored
IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms. Display WA #1141 Changes Since V1: - Re-arrange the code. - update wrapper to return if memory is symmetric (Rodrigo) Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Mahesh Kumar authored
If KMS decide to disable IPC make sure we override IPC configuration set by BIOS. Signed-off-by:
-
Mahesh Kumar authored
Memory with 16GB dimms require an increase of 1us in level-0 latency. This patch implements the same. Bspec: 4381 changes since V1: - s/memdev_info/dram_info - make skl_is_16gb_dimm pure function Changes since V2: - make is_16gb_dimm more generic - rebase Changes since V3: - Simplify condition (Maarten) Signed-off-by:
-
Mahesh Kumar authored
This patch adds support to decode system memory bandwidth and other parameters for skylake and Gen9+ platforms, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+. Changes Since V1: - s/memdev_info/dram_info - create a struct to hold channel info Changes Since V2: - rewrite code to adhere i915 coding style - not valid for GLK Signed-off-by:
-
Mahesh Kumar authored
This patch adds support to decode system memory bandwidth and other parameters for broxton platform, which will be used for arbitrated display memory bandwidth calculation in GEN9 based platforms and WM latency level-0 Work-around calculation on GEN9+ platforms. Changes since V1: - s/memdev_info/dram_info Changes since V2: - Adhere to i915 coding style (Rodrigo) Signed-off-by:
-
Anusha Srivatsa authored
Add Support to load DMC on Icelake. While at it, also add support to load the firmware during system resume. v2: load firmware during system resume.(Imre) v3: enable has_csr for icelake.(Jyoti) v4: Only load the firmware in this patch Cc: Jyoti Yadav <jyoti.r.yadav@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
Ville Syrjälä authored
If we have framebuffers that are >= 4GiB in size we will overflow the fb size check in intel_fill_fb_info(). Currently that is only possible with NV12 and CCS as offsets[1] may be anything between 0 and 0xffffffff. offsets[0] is currently required to be 0 so we can't hit the overflow with any single plane format (thanks to max fb size of 8kx8k and max stride of 32 KiB). In the future we may allow almost any framebuffer to exceed 4GiB in size so we really should fix the overflow. Not that the overflow is particularly dangerous. It's mostly just a sanity check against insane userspace. The display engine can't write to memory anyway so I suppose in the worst case we might anger the hw by attempting scanout past the end of the ggtt, or we might scan out some data that we're not supposed to see from other parts of the ggtt. Note that triggering this overflow depends on the driver aligning the fb height to the next tile boundary to push the calculated size above 4GiB. With linear buffers the effective tile height is one so that never happens, and the core already has a check for 32bit overflow of offsets[]+pitches[]*height. v2: Drop the unnecessary cast (Chris) Testcase: igt/kms_big_fb/x-tiled-addfb-size-offset-overflow Testcase: igt/kms_big_fb/y-tiled-addfb-size-offset-overflow Signed-off-by:
-
Ville Syrjälä authored
Use I915_GTT_PAGE_SIZE when talking about GTT pages rather than physical pages. There are some PAGE_SHIFTs left though. Not sure if we want to introduce I915_GTT_PAGE_SHIFT or what? Cc: Chris Wilson <chris@chris-wilson.co.uk> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> # at least some of it :) Signed-off-by:
-
Tvrtko Ursulin authored
We can remove the update-via-batch-buffer code path, which is basically an effective duplicate of update-via-context-image path, if we notice that after we have idled the GPU, we can update the context image even of the kernel context directly. (Update-via-batch-buffer path existed only to solve the problem of how to update the kernel context image.) Only additional thing needed is to activate the edited configuration by sending one empty request down the pipe. This accomplishes context restore of the updated kernel context and so the OA configuration gets written out to it's control registers. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
- 12 Sep, 2018 8 commits
-
-
Ville Syrjälä authored
Extract intel_cursor_check_surface() to better match the code layout of the other plane types. Reviewed-by:
-
Ville Syrjälä authored
Move the chv rotation vs. reflections checks to the plane->check() hook, away from the (now) platform agnostic intel_plane_atomic_check_with_state(). Reviewed-by:
-
Ville Syrjälä authored
Move the display w/a #1175 to a better place. That place being the new skl+ specific plane->check() hook. This leaves the skl_check_plane_surface() stuff to deal with the gtt offset and src coordinate stuff as originally envisioned. Reviewed-by:
-
Ville Syrjälä authored
Move the skl+ specific framebuffer related checks from intel_plane_atomic_check_with_state() into a new function (skl_plane_check_fb()) which we'll simply call from the skl plane->check() hook. v2: Split out the Y/Yf+CCS vs. interlaced change (José) Reviewed-by:
-
Ville Syrjälä authored
Split up intel_check_primary_plane() and intel_check_sprite_plane() into per-platform variants. This way we can get a unified behaviour between the SKL universal planes, and we stop checking for non-SKL specific scaling limits for the "sprite" planes. And we now get a natural place where to add more plarform specific checks. v2: Split the .check_plane() calling convention change out (José) Reviewed-by:
-
Ville Syrjälä authored
We can easily calculate the plane can_scale/min_downscale on demand. And later on we'll probably want to start calculating these dynamically based on the cdclk just as skl already does. Reviewed-by:
-
Ville Syrjälä authored
To reduce the confusion between a drm plane and the planes of framebuffers let's desiginate the latter as "color plane". Weak-Reviewed-by:
-
Ville Syrjälä authored
Stash the gtt_view structure into the plane state. This will become useful when we do GTT remapping as the gtt_view will not come directly from the fb anymore. Reviewed-by:
-
