- 14 Dec, 2018 23 commits
-
-
Stephen Boyd authored
- Add resets and make Qualcomm MSM8998 GCC driver more functional * clk-qcom-8998-resets: clk: qcom: Drop unused 8998 clock clk: qcom: Leave mmss noc on for 8998 clk: qcom: Add missing msm8998 resets clk: qcom: gcc-msm8998: Add clkref clocks clk: qcom: gcc-msm8998: Disable halt check of UFS clocks clk: qcom: gcc-msm8998: Drop hmss_dvm and lpass_at clk: qcom: Enumerate remaining msm8998 resets clk: qcom: Add xo dummy clk on msm8998 clk: qcom: Fix MSM8998 resets
-
Jeffrey Hugo authored
gcc_lpass_trig_clk is not used downstream, therefore there is no reason to expect it to be needed for clients. Let's remove it because messing with the clock has been observed to cause Linux hangs when the qdss_clk is initialized by rpmcc. Signed-off-by:
Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Fixes: 4807c71c (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by:
Stephen Boyd <sboyd@kernel.org>
-
Jeffrey Hugo authored
Similar to other qcom targets, gcc_mmss_noc_cfg_ahb_clk should not be disabled. Any mmss access depends on this clock, and its been observed that enabling mmssnoc_axi_rpm_clk with rpmcc results in an implicit access to mmss and will crash the system if gcc_mmss_noc_cfg_ahb_clk is disabled. Signed-off-by:
-
Stephen Boyd authored
Merge branches 'clk-imx7ulp', 'clk-imx6-fixes', 'clk-imx-fixes', 'clk-imx8qxp' and 'clk-imx8mq' into clk-next - NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM
-
Stephen Boyd authored
Merge branches 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and 'clk-rockchip' into clk-next * clk-renesas: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock clk: renesas: Mark rza2_cpg_clk_register static clk: renesas: r7s9210: Add USB clocks clk: renesas: r8a77970: Add RPC clocks clk: renesas: r7s9210: Add SDHI clocks * clk-allwinner: clk: sunxi-ng: a64: Allow parent change for VE clock clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL clk: sunxi-ng: h3: Allow parent change for ve clock clk: sunxi-ng: add support for suniv F1C100s SoC dt-bindings: clock: Add Allwinner suniv F1C100s CCU clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL clk: sunxi-ng: a64: Fix gate bit of DSI DPHY clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I clk: sunxi-ng: Add support for H6 DE3 clocks dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description clk: sunxi-ng: h6: Set video PLLs limits clk: sunxi-ng: Use u64 for calculation of NM rate clk: sunxi-ng: Adjust MP clock parent rate when allowed clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock * clk-tegra: clk: tegra: Return the exact clock rate from clk_round_rate clk: tegra30: Use Tegra CPU powergate helper function soc/tegra: pmc: Drop SMP dependency from CPU APIs clk: tegra: Fix maximum audio sync clock for Tegra124/210 clk: tegra: get rid of duplicate defines clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC clk: tegra20: Turn EMC clock gate into divider * clk-meson: (25 commits) clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: Mark some things static clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width clk: meson: meson8b: add the CPU clock post divider clocks clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 clk: meson: clk-regmap: add read-only gate ops clk: meson: meson8b: allow changing the CPU clock tree clk: meson: meson8b: run from the XTAL when changing the CPU frequency clk: meson: meson8b: add support for more M/N values in sys_pll clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel clk: meson: clk-pll: check if the clock is already enabled clk: meson: meson8b: fix the width of the cpu_scale_div clock clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table clk: meson: meson8b: use the HHI syscon if available dt-bindings: clock: meson8b: use the registers from the HHI syscon ... * clk-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
-
Stephen Boyd authored
Merge branches 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' and 'clk-ops-const' into clk-next - Make devm_of_clk_add_hw_provider() use parent dt node if necessary - Various SPDX taggings - Mark clk_ops const when possible * clk-managed-registration: clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock clk: apcs-msm8916: simplify probe cleanup by using devm clk: clk-twl6040: Free of_provider at remove clk: rk808: use managed version of of_provider registration clk: clk-hi655x: Free of_provider at remove clk: of-provider: look at parent if registered device has no provider info clk: Add kerneldoc to managed of-provider interfaces * clk-spdx: clk: Tag basic clk types with SPDX clk: Tag clk core files with SPDX clk: bcm2835: Switch to SPDX identifier * clk-remove-basic: clk: Loongson1: Remove usage of CLK_IS_BASIC clk: samsung: s3c2410: Remove usage of CLK_IS_BASIC clk: versatile: sp810: Remove usage of CLK_IS_BASIC clk: hisilicon: Remove usage of CLK_IS_BASIC clk: h8300: Remove usage of CLK_IS_BASIC clk: axm5516: Remove usage of CLK_IS_BASIC clk: st: Remove usage of CLK_IS_BASIC clk: renesas: Remove usage of CLK_IS_BASIC * clk-ops-const: clk: s2mps11: constify clk_ops structure clk: pxa: constify clk_ops structures clk: pistachio: constify clk_ops structures clk: palmas: constify clk_ops structure clk: max77686: constify clk_ops structure
-
Robert Yang authored
The current behavior is that clk_round_rate would return the same clock rate passed to it for valid PLL configurations. This change will return the exact rate the PLL will provide in accordance with clk API. Signed-off-by:
Robert Yang <decatf@gmail.com> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Jon Hunter authored
Rather than using the tegra_powergate_is_powered() function for determining if a CPU is powered, use the tegra_pmc_cpu_is_powered() instead which was created to get the CPU power status. Internally tegra_pmc_cpu_is_powered() calls tegra_powergate_is_powered() and so is equivalent. The Tegra30 clock driver is the only public user of tegra_powergate_is_powered() and so by updating the Tegra30 clock driver to use tegra_pmc_cpu_is_powered(), we can then make tegra_powergate_is_powered() a non-public function. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
-
Jon Hunter authored
When CONFIG_SMP is disabled, the tegra clk driver now fails to build: drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_cpu_rail_off_ready’: drivers/clk/tegra/clk-tegra30.c:1151:2: error: implicit declaration of function ‘tegra_pmc_cpu_is_powered’ [-Werror=implicit-function-declaration] cpu_pwr_status = tegra_pmc_cpu_is_powered(1) || ^ Fix the above error by removing the CONFIG_SMP ifdef around the declaration around the PMC CPU APIs because although these are not needed for non-SMP configurations, there is no harm in including these for non-SMP builds either. Fixes: 61866523ed6e ("clk: tegra30: Use Tegra CPU powergate helper function") Reported-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jon Hunter authored
The maximum frequency supported for I2S on Tegra124 and Tegra210 is 24.576MHz (as stated in the Tegra TK1 data sheet for Tegra124 and the Jetson TX1 module data sheet for Tegra210). However, the maximum I2S frequency is limited to 24MHz because that is the maximum frequency of the audio sync clock. Increase the maximum audio sync clock frequency to 24.576MHz for Tegra124 and Tegra210 in order to support 24.576MHz for I2S. Update the tegra_clk_register_sync_source() function so that it does not set the initial rate for the sync clocks and use the clock init tables to set the initial rate instead. Signed-off-by:
-
Marcel Ziswiler authored
Get rid of 3 duplicate defines. Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by:
-
Stephen Boyd authored
- Qualcomm SDM845 audio subsystem clks * clk-qcom-sdm845-lpass: clk: qcom: Add lpass clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM LPASS clock bindings dt-bindings: clock: Update GCC bindings for protected-clocks
-
Stephen Boyd authored
Merge branches 'clk-qcom-kconfig', 'clk-qcom-gpucc', 'clk-qcom-qcs404-rpm', 'clk-qcom-spi' and 'clk-qcom-videocc-binding' into clk-next - Qualcomm SDM845 GPU clock controllers - Qualcomm QCS404 RPM clk support * clk-qcom-kconfig: clk: qcom: Move to menuconfig and reduce lines * clk-qcom-gpucc: dt-bindings: clock: qcom: Fix the xo parent in gpucc example clk: qcom: gpu_cc_gmu_clk_src has 5 parents, not 6 clk: qcom: Add a dummy enable function for GX gdsc clk: qcom: gdsc: Don't override existing gdsc pd functions clk: qcom: Add graphics clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Graphics clock bindings * clk-qcom-qcs404-rpm: clk: qcom: smd: Add support for QCS404 rpm clocks * clk-qcom-spi: clk: qcom: msm8916: Additional clock rates for spi * clk-qcom-videocc-binding: dt-bindings: clock: Require #reset-cells in sdm845-videocc
-
Stephen Boyd authored
Merge branches 'clk-qoriq-t1023', 'clk-protected-binding', 'clk-define-show-macro' and 'clk-static' into clk-next - NXP QorIQ T1023 SoC support - Introduce a 'protected-clocks' binding for firmware protected clks - Shrink code some with DEFINE_SHOW_ATTRIBUTE() * clk-qoriq-t1023: clk: qoriq: add more chips support * clk-protected-binding: clk: qcom: Support 'protected-clocks' property dt-bindings: clk: Introduce 'protected-clocks' property * clk-define-show-macro: clk: tegra: Change to use DEFINE_SHOW_ATTRIBUTE macro clk: nomadik: Change to use DEFINE_SHOW_ATTRIBUTE macro * clk-static: clk: stm32mp1: drop pointless static qualifier in stm32_register_hw_clk()
-
Stephen Boyd authored
- Mediatek MT7629 SoC clk controllers * clk-bcm-module-license: clk: bcm2835: make license text and module license match * clk-boston-leak: clk: boston: unregister clks on failure in clk_boston_setup() clk: boston: fix possible memory leak in clk_boston_setup() * clk-mtk-mt7629: clk: mediatek: fix the PCIe MAC clock parent clk: mediatek: Drop more __init markings for driver probe clk: mediatek: Drop __init from mtk_clk_register_cpumuxes() dt-bindings: arm: mediatek: document clk bindings for MT7629 clk: mediatek: add clock support for MT7629 SoC
-
Aisheng Dong authored
Add imx8qxp lpcg driver support Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Aisheng Dong authored
The Low-Power Clock Gate (LPCG) modules contain a local programming model to control the clock gates for the peripherals. An LPCG module is used to locally gate the clocks for the associated peripheral. And they're bedind the SCU clock. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Aisheng Dong authored
Add imx8qxp clk driver which is based on SCU firmware clock service. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Abel Vesa authored
Remove the dependency between the i.MX8MQ CCM clock driver and the CONFIG_SOC_IMX8MQ and use CONFIG_CLK_IMX8MQ instead. CONFIG_CLK_IMX8MQ depends on ARCH_MXC && ARM64. Signed-off-by:
Abel Vesa <abel.vesa@nxp.com> Signed-off-by:
-
Aisheng Dong authored
Add SCU clock common part which will be used by client clock drivers. SCU clocks are totally different from the legacy clocks (No much legacy things can be reused), it's using a firmware interface now based on SCU protocol. So a new configuration option CONFIG_MXC_CLK_SCU is added. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Aisheng Dong authored
The patch introduces CONFIG_MXC_CLK option for legacy MMIO clocks, this is required to compile legacy MMIO clock conditionally when adding SCU based clocks for MX8 platforms later. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by:
-
Aisheng Dong authored
The Low-Power Clock Gate (LPCG) modules contain a local programming model to control the clock gates for the peripherals. An LPCG module is used to locally gate the clocks for the associated peripheral. Note: This level of clock gating is provided after the clocks are generated by the SCU resources and clock controls. Thus even if the clock is enabled by these control bits, it might still not be running based on the base resource. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: devicetree@vger.kernel.org Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Aisheng Dong authored
Add IMX8QXP SCU clock IDs. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Reviewed-by:
-
- 13 Dec, 2018 2 commits
-
-
Stephen Boyd authored
Merge tag 'v4.21-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip Pull rockchip clk driver updates from Heiko Stuebner: - register fixes for rk3188 and rk3328 - one new critical clock for rk3188 and a fixed clock id (double used number) - new clock id for rk3328 * tag 'v4.21-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
-
https://github.com/BayLibre/clk-mesonStephen Boyd authored
Pull more meson clk driver updates from Neil Armstrong: - Fix GXL HDMI Pll fractional bits (from first round) - Add the Meson8/Meson8b video clocks - Add clk-input helper and use it for axg-audio clock driver * tag 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson: clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width
-
- 11 Dec, 2018 4 commits
-
-
Jeffrey Hugo authored
commit c0cb7c7e ("clk: qcom: Enumerate remaining msm8998 resets") missed two USB2 resets. Add them. Fixes: c0cb7c7e ("clk: qcom: Enumerate remaining msm8998 resets") Signed-off-by:
-
Stephen Boyd authored
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: -
Stephen Boyd authored
These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: -
Jerome Brunet authored
Rework the axg audio clock controller to use the new clk-input helper function. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
- 10 Dec, 2018 11 commits
-
-
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Also remove parenthesis nearby that are not needed and include clk.h to fix a sparse warning about static function definition. Signed-off-by: -
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this drivers as it doesn't provide any benefit. Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in the clk init structure and then never tested again. Remove it from this driver as it doesn't provide any benefit. Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Jiancheng Xue <xuejiancheng@hisilicon.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: -
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <uclinux-h8-devel@lists.sourceforge.jp> Signed-off-by: -
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Anders Berg <anders.berg@lsi.com> Signed-off-by: -
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Signed-off-by: -
Stephen Boyd authored
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: <linux-renesas-soc@vger.kernel.org> Signed-off-by:
-
Matti Vaittinen authored
ROHM bd71837 and bd71847 contain 32768Hz clock gate. Support the clock using generic clock framework. Note, only bd71837 is tested but bd71847 should be identical what comes to clk parts. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
-
Stephen Boyd authored
We duplicate the 'depends on' in almost every Kconfig here, and it's getting out of hand now that we have tens of options for various SoC drivers here. Let's clean it up a little by making a menuconfig for a submenu and adding an if wrapper around the driver section. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: -
Lucas Stach authored
The ENET PLL is different from the other i.MX6 PLLs, as it has multiple outputs with different post-dividers, which are all bypassed if the single bypass bit is activated. The hardware setup looks something like this: _ refclk-o---PLL---o----DIV1-----| \ | | |M |----OUT1 o-----------------------|_/ | | _ | o----DIV2-----| \ | | |M |----OUT2 o-----------------------|_/ | | _ | `----DIV3-----| \ | |M |----OUT3 `-----------------------|_/ The bypass bit not only bypasses the PLL, but also the attached post-dividers. This would be reasonbly straight forward to model with a single output, or with different bypass bits for each output, but sadly the HW guys decided that it would be good to actuate all 3 muxes with a single bit. So the need to have the PLL bypassed for one of the outputs always affects 2 other (in our model) independent branches of the clock tree. This means the decision to bypass this PLL is a system wide design choice and should not be changed on-the-fly, so we can treat any bapass configuration as static. As such we can just register the post-dividiers with a ratio that reflects the bypass status, which allows us to bypass the PLL without breaking our abstraction model and with it DT stability. Signed-off-by:Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
