- 25 Nov, 2021 7 commits
-
-
Cédric Le Goater authored
These routines are not on hot code paths and pr_debug() is easier to activate. Also add a '0x' prefix to hex printed values (HW IRQ number). Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-2-clg@kaod.org
-
Nicholas Piggin authored
These aren't necessarily POWER9 only, and it's not to say some new vulnerability may not get discovered on other processors for which we would like the flexibility of having the workaround enabled by firmware. Remove the restriction that the workarounds only apply to POWER9. However POWER7 and POWER8 are not affected, and they may not have older firmware that does not advertise this, so clear these workarounds manually. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> [mpe: Incorporate changes from Nick, reword comment slightly.] Signed-off-by:
-
Julia Lawall authored
for_each_node_by_type performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e; @@ for_each_node_by_type(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
for_each_node_by_name performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e,e1; local idexpression n; @@ for_each_node_by_name(n, e1) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by:
-
Julia Lawall authored
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by:
-
Julia Lawall authored
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e; local idexpression n; @@ @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by:
-
Michael Ellerman authored
This merge's Nick's big P9 KVM series, original cover letter follows: KVM: PPC: Book3S HV P9: entry/exit optimisations This reduces radix guest full entry/exit latency on POWER9 and POWER10 by 2x. Nested HV guests should see smaller improvements in their L1 entry/exit, but this is also combined with most L0 speedups also applying to nested entry. nginx localhost throughput test in a SMP nested guest is improved about 10% (in a direct guest it doesn't change much because it uses XIVE for IPIs) when L0 and L1 are patched. It does this in several main ways: - Rearrange code to optimise SPR accesses. Mainly, avoid scoreboard stalls. - Test SPR values to avoid mtSPRs where possible. mtSPRs are expensive. - Reduce mftb. mftb is expensive. - Demand fault certain facilities to avoid saving and/or restoring them (at the cost of fault when they are used, but this is mitigated over a number of entries, like the facilities when context switching processes). PM, TM, and EBB so far. - Defer some sequences that are made just in case a guest is interrupted in the middle of a critical section to the case where the guest is scheduled on a different CPU, rather than every time (at the cost of an extra IPI in this case). Namely the tlbsync sequence for radix with GTSE, which is very expensive. - Reduce locking, barriers, atomics related to the vcpus-per-vcore > 1 handling that the P9 path does not require.
-
- 24 Nov, 2021 33 commits
-
-
Nicholas Piggin authored
On POWER9 and newer, rather than the complex HMI synchronisation and subcore state, have each thread un-apply the guest TB offset before calling into the early HMI handler. This allows the subcore state to be avoided, including subcore enter / exit guest, which includes an expensive divide that shows up slightly in profiles. Signed-off-by:
-
Nicholas Piggin authored
The P9 path uses vc->dpdes only for msgsndp / SMT emulation. This adds an ordering requirement between vcpu->doorbell_request and vc->dpdes for no real benefit. Use vcpu->doorbell_request directly. Signed-off-by:
-
Nicholas Piggin authored
This goes further to removing vcores from the P9 path. Also avoid the memset in favour of explicitly initialising all fields. Signed-off-by:
-
Nicholas Piggin authored
The P9 path always uses one vcpu per vcore, so none of the vcore, locks, stolen time, blocking logic, shared waitq, etc., is required. Remove most of it. Signed-off-by:
-
Nicholas Piggin authored
cpu_in_guest is set to determine if a CPU needs to be IPI'ed to exit the guest and notice the need_tlb_flush bit. This can be implemented as a global per-CPU pointer to the currently running guest instead of per-guest cpumasks, saving 2 atomics per entry/exit. P7/8 doesn't require cpu_in_guest, nor does a nested HV (only the L0 does), so move it to the P9 HV path. Signed-off-by:
-
Nicholas Piggin authored
The mmu will almost always be ready. Signed-off-by:
-
Nicholas Piggin authored
kvm_hstate.in_guest provides the equivalent of MSR[RI]=0 protection, and it covers the existing MSR[RI]=0 section in late entry and early exit, so clearing and setting MSR[RI] in those cases does not actually do anything useful. Remove the RI manipulation and replace it with comments. Make the in_guest memory accesses a bit closer to a proper critical section pattern. This speeds up guest entry/exit performance. This also removes the MSR[RI] warnings which aren't very interesting and would cause crashes if they hit due to causing an interrupt in non-recoverable code. Signed-off-by:
-
Nicholas Piggin authored
slbmfee/slbmfev instructions are very expensive, moreso than a regular mfspr instruction, so minimising them significantly improves hash guest exit performance. The slbmfev is only required if slbmfee found a valid SLB entry. Signed-off-by:
-
Nicholas Piggin authored
Rearrange the MSR saving on entry so it does not follow the mtmsrd to disable interrupts, avoiding a possible RAW scoreboard stall. Signed-off-by:
-
Nicholas Piggin authored
mftb() is expensive and one can be avoided on nested guest dispatch. If the time checking code distinguishes between the L0 timer and the nested HV timer, then both can be tested in the same place with the same mftb() value. This also nicely illustrates the relationship between the L0 and nested HV timers. Signed-off-by:
-
Nicholas Piggin authored
Use the existing TLB flushing logic to IPI the previous CPU and run the necessary barriers before running a guest vCPU on a new physical CPU, to do the necessary radix GTSE barriers for handling the case of an interrupted guest tlbie sequence. This requires the vCPU TLB flush sequence that is currently just done on one thread, to be expanded to ensure the other threads execute a ptesync, because causing them to exit the guest will no longer cause a ptesync by itself. This results in more IPIs than the TLB flush logic requires, but it's a significant win for common case scheduling when the vCPU remains on the same physical CPU. This saves about 520 cycles (nearly 10%) on a guest entry+exit micro benchmark on a POWER9. Signed-off-by:
-
Nicholas Piggin authored
This creates separate functions for old and new paths for vCPU TLB flushing, which will reduce complexity of the next change. Signed-off-by:
-
Nicholas Piggin authored
This also moves the PSSCR update in nested entry to avoid a SPR scoreboard stall. Signed-off-by:
-
Nicholas Piggin authored
Some of the DAWR SPR access is already predicated on dawr_enabled(), apply this to the remainder of the accesses. Signed-off-by:
-
Nicholas Piggin authored
Tighten up partition switching code synchronisation and comments. In particular, hwsync ; isync is required after the last access that is performed in the context of a partition, before the partition is switched away from. Signed-off-by:
-
Nicholas Piggin authored
Linux implements SPR save/restore including storage space for registers in the task struct for process context switching. Make use of this similarly to the way we make use of the context switching fp/vec save restore. This improves code reuse, allows some stack space to be saved, and helps with avoiding VRSAVE updates if they are not required. Signed-off-by:
-
Nicholas Piggin authored
Use HFSCR facility disabling to implement demand faulting for TM, with a hysteresis counter similar to the load_fp etc counters in context switching that implement the equivalent demand faulting for userspace facilities. This speeds up guest entry/exit by avoiding the register save/restore when a guest is not frequently using them. When a guest does use them often, there will be some additional demand fault overhead, but these are not commonly used facilities. Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Use HFSCR facility disabling to implement demand faulting for EBB, with a hysteresis counter similar to the load_fp etc counters in context switching that implement the equivalent demand faulting for userspace facilities. This speeds up guest entry/exit by avoiding the register save/restore when a guest is not frequently using them. When a guest does use them often, there will be some additional demand fault overhead, but these are not commonly used facilities. Signed-off-by:
-
Nicholas Piggin authored
This avoids more scoreboard stalls and reduces mtSPRs. Signed-off-by:
-
Nicholas Piggin authored
Use CPU_FTR_P9_RADIX_PREFETCH_BUG to apply the workaround, to test for DD2.1 and below processors. This saves a mtSPR in guest entry. Signed-off-by:
-
Nicholas Piggin authored
This moves PMU switch to guest as late as possible in entry, and switch back to host as early as possible at exit. This helps the host get the most perf coverage of KVM entry/exit code as possible. This is slightly suboptimal for SPR scheduling point of view when the PMU is enabled, but when perf is disabled there is no real difference. Signed-off-by:
-
Nicholas Piggin authored
If TM is not active, only TM register state needs to be saved and restored, avoiding several mfmsr/mtmsrd instructions and improving performance. Signed-off-by:
-
Nicholas Piggin authored
Move register saving and loading from kvmhv_p9_guest_entry() into the HV and nested entry handlers. Accesses are scheduled to reduce mtSPR / mfSPR interleaving which reduces SPR scoreboard stalls. Signed-off-by:
-
Nicholas Piggin authored
Move the part of the guest entry which is specific to nested HV into its own function. This is just refactoring. Signed-off-by:
-
Nicholas Piggin authored
Move the P9 guest/host register switching functions to the built-in P9 entry code, and export it for nested to use as well. This allows more flexibility in scheduling these supervisor privileged SPR accesses with the HV privileged and PR SPR accesses in the low level entry code. Signed-off-by:
-
Nicholas Piggin authored
This should be no functional difference but makes the caller easier to read. Signed-off-by:
-
Nicholas Piggin authored
This juggles SPR switching on the entry and exit sides to be more symmetric, which makes the next refactoring patch possible with no functional change. Signed-off-by:
-
Nicholas Piggin authored
Keep better track of the current SPR value in places where they are to be loaded with a new context, to reduce expensive mtSPR operations. Signed-off-by:
-
Nicholas Piggin authored
Avoid interleaving mfSPR and mtSPR to reduce SPR scoreboard stalls. Signed-off-by:
-
Nicholas Piggin authored
Reduce the number of mfTB executed by passing the current timebase around entry and exit code rather than read it multiple times. Signed-off-by:
-
Nicholas Piggin authored
Move the TB updates between saving and loading guest and host SPRs, to improve scheduling by keeping issue-NTC operations together as much as possible. Signed-off-by:
-
Nicholas Piggin authored
Change dec_expires to be relative to the guest timebase, and allow it to be moved into low level P9 guest entry functions, to improve SPR access scheduling. Signed-off-by:
-
Nicholas Piggin authored
Small cleanup makes it a bit easier to match up entry and exit operations. Signed-off-by:
-
