Flushing/listing entries was not RCU safe, so parallel flush/dump
could lead to kernel crash. Bug reported by Deniz Eren.

Fixes netfilter bugzilla id #1050.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

The nft_counter_init() and nft_counter_clone() functions should return
negative error value -ENOMEM instead of positive ENOMEM.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The NETFILTER_XT_TARGET_TEE option selects NF_DUP_IPV6 whenever
IP6_NF_IPTABLES is enabled, and it ensures that it cannot be
builtin itself if NF_CONNTRACK is a loadable module, as that
is a dependency for NF_DUP_IPV6.

However, NF_DUP_IPV6 can be enabled even if IP6_NF_IPTABLES is
turned off, and it only really depends on IPV6. With the current
check in tee_tg6, we call nf_dup_ipv6() whenever NF_DUP_IPV6
is enabled. This can however be a loadable module which is
unreachable from a built-in xt_TEE:

net/built-in.o: In function `tee_tg6':
:(.text+0x67728): undefined reference to `nf_dup_ipv6'

The bug was originally introduced in the split of the xt_TEE module
into separate modules for ipv4 and ipv6, and two patches tried
to fix it unsuccessfully afterwards.

This is a revert of the the first incorrect attempt to fix it,
going back to depending on IPV6 as the dependency, and we
adapt the 'select' condition accordingly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: bbde9fc1 ("netfilter: factor out packet duplication for IPv4/IPv6")
Fixes: 116984a3 ("netfilter: xt_TEE: use IS_ENABLED(CONFIG_NF_DUP_IPV6)")
Fixes: 74ec4d55 ("netfilter: fix xt_TEE and xt_TPROXY dependencies")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If nlh->nlmsg_len is zero then an infinite loop is triggered because
'skb_pull(skb, msglen);' pulls zero bytes.

The calculation in nlmsg_len() underflows if 'nlh->nlmsg_len <
NLMSG_HDRLEN' which bypasses the length validation and will later
trigger an out-of-bound read.

If the length validation does fail then the malformed batch message is
copied back to userspace. However, we cannot do this because the
nlh->nlmsg_len can be invalid. This leads to an out-of-bounds read in
netlink_ack:

    [   41.455421] ==================================================================
    [   41.456431] BUG: KASAN: slab-out-of-bounds in memcpy+0x1d/0x40 at addr ffff880119e79340
    [   41.456431] Read of size 4294967280 by task a.out/987
    [   41.456431] =============================================================================
    [   41.456431] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    [   41.456431] -----------------------------------------------------------------------------
    ...
    [   41.456431] Bytes b4 ffff880119e79310: 00 00 00 00 d5 03 00 00 b0 fb fe ff 00 00 00 00  ................
    [   41.456431] Object ffff880119e79320: 20 00 00 00 10 00 05 00 00 00 00 00 00 00 00 00   ...............
    [   41.456431] Object ffff880119e79330: 14 00 0a 00 01 03 fc 40 45 56 11 22 33 10 00 05  .......@EV."3...
    [   41.456431] Object ffff880119e79340: f0 ff ff ff 88 99 aa bb 00 14 00 0a 00 06 fe fb  ................
                                            ^^ start of batch nlmsg with
                                               nlmsg_len=4294967280
    ...
    [   41.456431] Memory state around the buggy address:
    [   41.456431]  ffff880119e79400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [   41.456431]  ffff880119e79480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    [   41.456431] >ffff880119e79500: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
    [   41.456431]                                ^
    [   41.456431]  ffff880119e79580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    [   41.456431]  ffff880119e79600: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb
    [   41.456431] ==================================================================

Fix this with better validation of nlh->nlmsg_len and by setting
NFNL_BATCH_FAILURE if any batch message fails length validation.

CAP_NET_ADMIN is required to trigger the bugs.

Fixes: 9ea2aa8b ("netfilter: nfnetlink: validate nfnetlink header from batch")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The spin_unlock call should have been left as-is, revert.

Fixes: b16c2919 ("netfilter: nf_conntrack: use safer way to lock all buckets")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Since bd678e09 ("netfilter: nfnetlink: fix splat due to incorrect
socket memory accounting in skbuff clones"), we don't manually attach
the sk to the skbuff clone anymore, so we have to use the original
skbuff from netlink_ack() which needs to access the sk pointer.

Fixes: bd678e09 ("netfilter: nfnetlink: fix splat due to incorrect socket memory accounting in skbuff clones")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Ulrich reports soft lockup with following (shortened) callchain:

NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s!
__netif_receive_skb_core+0x6e4/0x774
process_backlog+0x94/0x160
net_rx_action+0x88/0x178
call_do_softirq+0x24/0x3c
do_softirq+0x54/0x6c
__local_bh_enable_ip+0x7c/0xbc
nf_ct_iterate_cleanup+0x11c/0x22c [nf_conntrack]
masq_inet_event+0x20/0x30 [nf_nat_masquerade_ipv6]
atomic_notifier_call_chain+0x1c/0x2c
ipv6_del_addr+0x1bc/0x220 [ipv6]

Problem is that nf_ct_iterate_cleanup can run for a very long time
since it can be interrupted by softirq processing.
Moreover, atomic_notifier_call_chain runs with rcu readlock held.

So lets call cond_resched() in nf_ct_iterate_cleanup and defer
the call to a work queue for the atomic_notifier_call_chain case.

We also need another cond_resched in get_next_corpse, since we
have to deal with iter() always returning false, in that case
get_next_corpse will walk entire conntrack table.
Reported-by: Ulrich Weber <uw@ocedo.com>
Tested-by: Ulrich Weber <uw@ocedo.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Johan Hedberg says:

====================
pull request: bluetooth 2016-01-30

Here's a set of important Bluetooth fixes for the 4.5 kernel:

 - Two fixes to 6LoWPAN code (one fixing a potential crash)
 - Fix LE pairing with devices using both public and random addresses
 - Fix allocation of dynamic LE PSM values
 - Fix missing COMPATIBLE_IOCTL for UART line discipline

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 4015 section 3.4 says the TCP sender MUST refrain from
reversing the congestion control state when the ACK signals
congestion through the ECN-Echo flag. Currently we may not
always do that when prior_ssthresh is reset upon receiving
ACKs with ECE marks. This patch fixes that.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

self->ctrl_skb is protected by self->spinlock, we should not
access it out of the lock. Move the debugging printk inside.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arnd Bergmann says:

====================
network driver fixes

This is an updated series of fixes for the network device drivers
that showed warnings in ARM randconfig.

Changes since v1 are:

dropped "net: macb: avoid uninitialized variables", already fixed in net-next

dropped "net: fddi/defxx: avoid warning about uninitialized variable
	use", already fixed in net-next

added missing barriers in "net: moxart: use correct accessors for
	DMA memory"

clarified "net: bgmac: clarify CONFIG_BCMA dependency" changelog
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The tg3_set_eeprom() function correctly initializes the 'start' variable,
but gcc generates a false warning:

drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom':
drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized]

I have not come up with a way to restructure the code in a way that
avoids the warning without making it less readable, so this adds an
initialization for the declaration to shut up that warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The nb8800_poll() function initializes the 'next' variable in the
loop looking for new input data. We know this will be called at
least once because 'budget' is a guaranteed to be a positive number
when we enter the function, but the compiler doesn't know that
and warns when the variable is used later:

drivers/net/ethernet/aurora/nb8800.c: In function 'nb8800_poll':
drivers/net/ethernet/aurora/nb8800.c:350:21: warning: 'next' may be used uninitialized in this function [-Wmaybe-uninitialized]

Changing the 'while() {}' loop to 'do {} while()' makes it obvious
to the compiler what is going on so it no longer warns.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_PCI_MSI is disabled, we get warnings about unused functions
in the vxge driver:

drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function]
drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function]

We could add another #ifdef here, but it's nicer to avoid those warnings
for good by converting the existing #ifdef to if(IS_ENABLED()), which has
the same effect but provides better compile-time coverage in general,
and lets the compiler understand better when the function is intentionally
unused.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bgmac driver depends on BCMA_HOST_SOC, which is only used
when CONFIG_BCMA is enabled. However, it is a bool option and can
be set when CONFIG_BCMA=m, and then bgmac can be built-in, leading
to an obvious link error:

drivers/built-in.o: In function `bgmac_init':
:(.init.text+0x7f2c): undefined reference to `__bcma_driver_register'
drivers/built-in.o: In function `bgmac_exit':
:(.exit.text+0x110a): undefined reference to `bcma_driver_unregister'

To avoid this case, we need to depend on both BCMA and BCMA_SOC,
as this patch does. I'm also trying to make the dependency more
readable by splitting it into three lines, and adding a COMPILE_TEST
alternative so we can test-build it in all configurations that
support BCMA.

The added dependency on FIXED_PHY addresses a related issue where
we cannot call fixed_phy_register() when CONFIG_FIXED_PHY=m and
CONFIG_BGMAC=y.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building the hp100 ethernet driver causes warnings when both the PCI
and EISA drivers are disabled:

ethernet/hp/hp100.c: In function 'hp100_module_init':
ethernet/hp/hp100.c:3047:2: warning: label 'out3' defined but not used [-Wunused-label]
ethernet/hp/hp100.c: At top level:
ethernet/hp/hp100.c:2828:13: warning: 'cleanup_dev' defined but not used [-Wunused-function]

We can easily avoid the warnings and make the driver look slightly
nicer by removing the #ifdefs that check for the CONFIG_PCI and
CONFIG_EISA, as all the registration functions are designed to
have no effect when the buses are disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The davinci_cpdma mixes up physical addresses as seen from the CPU
and DMA addresses as seen from a DMA master, since it can operate
on both normal memory or an on-chip buffer. If dma_addr_t is
different from phys_addr_t, this means we get a compile-time warning
about the type mismatch:

ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create':
ethernet/ti/davinci_cpdma.c:182:48: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]
   pool->cpumap = dma_alloc_coherent(dev, size, &pool->phys,
In file included from ethernet/ti/davinci_cpdma.c:21:0:
dma-mapping.h:398:21: note: expected 'dma_addr_t * {aka long long unsigned int *}' but argument is of type 'phys_addr_t * {aka unsigned int *}'
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,

This slightly restructures the code so the address we use for
mapping RAM into a DMA address is always a dma_addr_t, avoiding
the warning. The code is correct even if both types are 32-bit
because the DMA master in this device only supports 32-bit addressing
anyway, independent of the types that are used.

We still assign this value to pool->phys, and that is wrong if
the driver is ever used with an IOMMU, but that value appears to
be never used, so there is no problem really. I've added a couple
of comments about where we do things that are slightly violating
the API.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
ipv6: fix sticky pktinfo behaviour

Currently:

ip addr add dev eth0 2001:0010::1/64
ip addr add dev eth1 2001:0020::1/64
ping6 -I eth0 2001:0020::2

do not lead to the expected results, i.e. eth1 is used as the
egress interface.

This is due to two related issues in handling sticky pktinfo,
used by ping6 to enforce the device binding:

- ip6_dst_lookup_flow()/ip6_dst_lookup_tail() do not really enforce
flowi6_oif match
- ipv6 udp connect() just ignore flowi6_oif

These patches address each issue individually.

The kernel has never enforced the egress interface specified
via the sticky pktinfo, except briefly between the commits
741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set")
and
d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE flag if saddr set"),
but the ping6 tools was unaffected up to iputils-20100214,
since before it used SO_BINDTODEVICE to enforce the egress
interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the egress interface index specified via IPV6_PKTINFO
is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7
can be subverted when the user space application calls connect()
before sendmsg().
Fix it by initializing properly flowi6_oif in connect() before
performing the route lookup.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current implementation of ip6_dst_lookup_tail basically
ignore the egress ifindex match: if the saddr is set,
ip6_route_output() purposefully ignores flowi6_oif, due
to the commit d46a9d67 ("net: ipv6: Dont add RT6_LOOKUP_F_IFACE
flag if saddr set"), if the saddr is 'any' the first route lookup
in ip6_dst_lookup_tail fails, but upon failure a second lookup will
be performed with saddr set, thus ignoring the ifindex constraint.

This commit adds an output route lookup function variant, which
allows the caller to specify lookup flags, and modify
ip6_dst_lookup_tail() to enforce the ifindex match on the second
lookup via said helper.

ip6_route_output() becames now a static inline function build on
top of ip6_route_output_flags(); as a side effect, out-of-tree
modules need now a GPL license to access the output route lookup
functionality.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
iwlwifi

* Fix support for 3168 device:
  * NVM version
  * firmware file name
  * device IDs
* Fix a compilation warning in dvm calibration code
* Fix the TPC (reduced Tx Power) code. This fixes performance issues
* Add device IDs for 8265

rtx2x00

* fix monitor mode regression dating back to 4.1

brcmfmac

* fix sdio initialisation related crash

rtlwifi

* rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded

ath9k

* ignore eeprom magic mismatch on flash based devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not trim skb for mmaped socket since its buf size is fixed
and userspace will read as frame which data equals head. mmaped
socket will not call recvmsg, means max_recvmsg_len is 0,
skb_reserve was not called before commit: db65a3aa.

Fixes: db65a3aa (netlink: Trim skb to alloc size to avoid MSG_TRUNC)
Signed-off-by: Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

The size of all_zeros_mac is 6 byte, but eth_hash() will access the
8 byte, and KASan reported the below bug:

[ 8596.479031] BUG: KASan: out of bounds access in __vxlan_find_mac+0x24/0x100 at addr ffffffff841514c0
[ 8596.487647] Read of size 8 by task ip/52820
[ 8596.490818] Address belongs to variable all_zeros_mac+0x0/0x40
[ 8596.496051] CPU: 0 PID: 52820 Comm: ip Tainted: G WC 4.1.15 #1
[ 8596.503520] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014
[ 8596.509365] ffffffff841514c0 ffff88007450f0b8 ffffffff822fa5e1 0000000000000032
[ 8596.516112] ffff88007450f150 ffff88007450f138 ffffffff812dd58c ffff88007450f1d8
[ 8596.522856] ffffffff81113b80 0000000000000282 0000000000000001 ffffffff8101ee4d
[ 8596.529599] Call Trace:
[ 8596.530858] [<ffffffff822fa5e1>] dump_stack+0x4f/0x7b
[ 8596.535080] [<ffffffff812dd58c>] kasan_report_error+0x3bc/0x3f0
[ 8596.540258] [<ffffffff81113b80>] ? __lock_acquire+0x90/0x2140
[ 8596.545245] [<ffffffff8101ee4d>] ? save_stack_trace+0x2d/0x80
[ 8596.550234] [<ffffffff812dda70>] kasan_report+0x40/0x50
[ 8596.554647] [<ffffffff81b211e4>] ? __vxlan_find_mac+0x24/0x100
[ 8596.559729] [<ffffffff812dc399>] __asan_load8+0x69/0xa0
[ 8596.564141] [<ffffffff81b211e4>] __vxlan_find_mac+0x24/0x100
[ 8596.569033] [<ffffffff81b2683d>] vxlan_fdb_create+0x9d/0x570

it can be fixed by enlarging the all_zeros_mac to 8 byte, although it is
harmless; eth_hash() will be called in other place with the memory which
is larger and equal to 8 byte.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the port based VLAN maps should be configured to allow every
port to egress frames on all other ports, except themselves.

The debugfs interface shows that they are misconfigured. For instance, a
7-port switch has the following content in the related register 0x06:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7f   7e   7d   7c   7b   7a   79
    ...

This means that port 3 is allowed to talk to port 2-6, but cannot talk
to ports 0 and 1. With this fix, port 3 can correctly talk to all ports
except 3 itself:

       GLOBAL GLOBAL2 SERDES   0    1    2    3    4    5    6
    ...
    6:  1fa4    1f0f       4   7e   7d   7b   77   6f   5f   3f
    ...

Fixes: ede8098d ("net: dsa: mv88e6xxx: bridges do not need an FID")
Reported-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fib_table_lookup function had a shift by 32 that triggered a UBSAN
warning.  This was due to the fact that I had placed the shift first and
then followed it with the check for the suffix length to ignore the
undefined behavior.  If we reorder this so that we verify the suffix is
less than 32 before shifting the value we can avoid the issue.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The moxart ethernet driver confuses coherent DMA buffers with
MMIO registers.

moxart_ether.c: In function 'moxart_mac_setup_desc_ring':
moxart_ether.c:146:428: error: passing argument 1 of '__fswab32' makes integer from pointer without a cast [-Werror=int-conversion]
moxart_ether.c:74:39: warning: incorrect type in argument 3 (different address spaces)
moxart_ether.c:74:39:    expected void *cpu_addr
moxart_ether.c:74:39:    got void [noderef] <asn:2>*tx_desc_base

This leaves the basic logic alone and uses normal pointers for
the virtual address of the descriptor. As we cannot use readl/writel
to access them, we also introduce our own moxart_desc_read
moxart_desc_write helpers that perform the same endianess swap
as the original code, but without the address space conversion.

The barriers are made explicit here where needed: Even in the worst-case
scenario, we just have to use a rmb() after checking ownership so
we don't read any input data before we are sure it is value, and we
use wmb() before transferring ownership back to the device.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and
CONFIG_IP_PNP_RARP are all disabled, we get a warning about the
ic_proto_used variable being unused:

net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable]

This avoids the warning, by making the definition conditional on
whether a dynamic IP configuration protocol is configured. If not,
we know that the value is always zero, so we can optimize away the
variable and all code that depends on it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

3 small bug fix patches for net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The ring index j is not wrapped properly at the end of the ring, causing
it to reference pointers past the end of the ring.  For proper loop
termination and to access the ring properly, we need to increment j and
mask it before referencing the ring entry.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This hardware counter is misleading as it counts dropped packets that
don't match the hardware filters for unicast/broadcast/multicast.  We
will still report this counter in ethtool -S for diagnostics purposes.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use completion ring for ring free response from firmware.  The response
will be the last entry in the ring and we can free the ring after getting
the response.  This will guarantee no spurious DMA to freed memory.
Signed-off-by: Prashant Sreedharan <prashant@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are cases where qdisc_dequeue_peeked can return NULL, and the result
is dereferenced later on in the function.

Similarly to the other qdisc dequeue functions, check whether the skb
pointer is NULL and if it is, goto out.
Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the driver to use ns_to_timespec64() and timespec64_to_ns()
instead of open coding the same logic.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when a macvlan is being initialized and the lower device is
netif_carrier_ok(), the macvlan device doesn't run through
rfc2863_policy() and is left with UNKNOWN operstate. Fix it by adding an
unconditional linkwatch event for the new macvlan device. Similar fix is
already used by the 8021q device (see register_vlan_dev()). Also fix the
inconsistent state when the lower device has been down and its carrier
was changed (when a device is down NETDEV_CHANGE doesn't get generated).
The second issue can be seen f.e. when we have a macvlan on top of a 8021q
device which has been down and its real device has been changing carrier
states, after setting the 8021q device up, the macvlan device will have
the same carrier state as it was before even though the 8021q can now
have a different state.
Example for case 1:
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 1000

$ ip l add l eth2 macvl0 type macvlan
$ ip l set macvl0 up
$ ip l sh macvl0
72: macvl0@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN mode DEFAULT group default
    link/ether f6:0b:54:0a:9d:a3 brd ff:ff:ff:ff:ff:ff

Example for case 2 (order is important):
Prestate: eth2 UP/CARRIER, vlan1 down, vlan1-macvlan down
$ ip l set vlan1-macvlan up
$ ip l sh vlan1-macvlan
71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff

[ eth2 loses CARRIER before vlan1 has been UP-ed ]

$ ip l sh eth2
4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN mode DEFAULT group default qlen 1000
    link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff
$ ip l sh vlan1-macvlan
71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff
$ ip l set vlan1 up
$ ip l sh vlan1
70: vlan1@eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether 52:54:00:bf:57:16 brd ff:ff:ff:ff:ff:ff
$ ip l sh vlan1-macvlan
71: vlan1-macvlan@vlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/ether 4a:b8:44:56:b9:b9 brd ff:ff:ff:ff:ff:ff

vlan1-macvlan is still UP, still has carrier and is still in the same
operstate as before. After the patch in case 1 macvl0 has state UP as it
should and in case 2 vlan1-macvlan has state LOWERLAYERDOWN again as it
should. Note that while the lower macvlan device is down their carrier
and thus operstate can go out of sync but that will be fixed once the
lower device goes up again.
This behaviour seems to have been present since beginning of git history.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 'commit 7fe8097c ("tipc: fix nullpointer bug when subscribing
to events")', we terminate the connection if the subscription
creation fails.
In the same commit, the subscription creation result was based on
the value of the subscription pointer (set in the function) instead
of the return code.

Unfortunately, the same function tipc_subscrp_create() handles
subscription cancel request. For a subscription cancellation request,
the subscription pointer cannot be set. Thus if a subscriber has
several subscriptions and cancels any of them, the connection is
terminated.

In this commit, we terminate the connection based on the return value
of tipc_subscrp_create().
Fixes: commit 7fe8097c ("tipc: fix nullpointer bug when subscribing to events")
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the driver to use ns_to_timespec64() to keep consistency
with timespec64_to_ns() instead of open coding the same logic.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not assume a valid protocol header is present,
as this is not the case for IPv4 fragments.

Lets avoid extra cache line misses and potential bugs
if we actually find a socket and incorrectly uses its dst.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit cad20c27 was supposed to
fix handling of devices first using public addresses and then
switching to RPAs after pairing. Unfortunately it missed a couple of
key places in the code.

1. When evaluating which devices should be removed from the existing
white list we also need to consider whether we have an IRK for them or
not, i.e. a call to hci_find_irk_by_addr() is needed.

2. In smp_notify_keys() we should not be requiring the knowledge of
the RPA, but should simply keep the IRK around if the other conditions
require it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.4+

At least the l2cap_add_psm() routine depends on the source address
type being properly set to know what auto-allocation ranges to use, so
the assignment to l2cap_chan needs to happen before this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>