- 03 Jun, 2022 6 commits
-
-
Evan Quan authored
Suppress the following compile warnings: >> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v11_0_pptable.h:163:17: warning: field smc_pptable within 'struct smu_11_0_powerplay_table' is less aligned than 'PPTable_t' and is usually due to 'struct smu_11_0_powerplay_table' being packed, which can lead to unaligned accesses [-Wunaligned-access] PPTable_t smc_pptable; //PPTable_t in smu11_driver_if.h ^ 1 warning generated. -- >> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v11_0_7_pptable.h:193:17: warning: field smc_pptable within 'struct smu_11_0_7_powerplay_table' is less aligned than 'PPTable_t' and is usually due to 'struct smu_11_0_7_powerplay_table' being packed, which can lead to unaligned accesses [-Wunaligned-access] PPTable_t smc_pptable; //PPTable_t in smu11_driver_if.h ^ 1 warning generated. -- >> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/inc/smu_v13_0_pptable.h:161:12: warning: field smc_pptable within 'struct smu_13_0_powerplay_table' is less aligned than 'PPTable_t' and is usually due to 'struct smu_13_0_powerplay_table' being packed, which can lead to unaligned accesses [-Wunaligned-access] Signed-off-by:Evan Quan <evan.quan@amd.com> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Philip Yang authored
Migration range from system memory to VRAM, if system page can not be locked or unmapped, we do partial migration and leave some pages in system memory. Several bugs found to copy pages and update GPU mapping for this situation: 1. copy to vram should use migrate->npage which is total pages of range as npages, not migrate->cpages which is number of pages can be migrated. 2. After partial copy, set VRAM res cursor as j + 1, j is number of system pages copied plus 1 page to skip copy. 3. copy to ram, should collect all continuous VRAM pages and copy together. 4. Call amdgpu_vm_update_range, should pass in offset as bytes, not as number of pages. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Lang Yu authored
The kfd_bo_list is used to restore process BOs after evictions. As page tables could be destroyed during evictions, we should also update pinned BOs' page tables during restoring to make sure they are valid. So for pinned BOs, 1, Validate them and update their page tables. 2, Don't add eviction fence for them. v2: - Don't handle pinned ones specially in BO validation.(Felix) Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Philip Yang authored
Flush TLBs when existing PDEs are updated because a PTB or PDB moved, but avoids unnecessary TLB flushes when new PDBs or PTBs are added to the page table, which commonly happens when memory is mapped for the first time. Suggested-by:
-
Sunil Khatri authored
Add IP GC 10.3.7 in the list of target to have tmz enabled by default. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
-
Mario Limonciello authored
Loading amdgpu on GC 10.3.7 shows an ERR level message: `kfd kfd: amdgpu: GC IP 0a0307 not supported in kfd` Add these targets to match yellow carp structures. Reported-by:
David Chang <david.chang@amd.com> Reviewed-by:
Jesse(Jie) Zhang <Jesse.Zhang@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
- 01 Jun, 2022 19 commits
-
-
Philip Yang authored
MMU notifier callback may pass in mm with mm->mm_users==0 when process is exiting, use mmget_no_zero to avoid accessing invalid mm in deferred list work after mm is gone. Signed-off-by:
-
Candice Li authored
Adjust the sequence for ras late init and separate ras reset error status from query status. v2: squash in fix from Candice Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Stanley.Yang authored
Fix aldebaran ras supported check on SRIOV guest side, the previous check conditicon block all ras feature on baremetal Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
This code should be executed. Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
sunliming authored
This symbol is not used outside of gfx_v11_0.c, so marks it static. Fixes the following w1 warning: drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:1945:6: warning: no previous prototype for function 'gfx_v11_0_rlc_stop' [-Wmissing-prototypes]. Reported-by:
sunliming <sunliming@kylinos.cn> Signed-off-by:
-
sunliming authored
Fixes the following w1 warning: drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:5873:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]. Reported-by:
-
Roman Li authored
[Why] Wrong fb offset results in dmub f/w errors and white screen. [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 [How] Read aper_base from mmhub because GC is off by default v2: use BAR for passthrough (Alex) Signed-off-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
-
Alex Deucher authored
Supports AV1. Mesa already has support for this and doesn't rely on the kernel caps for yellow carp, so this was already working from an application perspective. Fixes: 55439817 ("amdgpu/nv.c - Added video codec support for Yellow Carp") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2002Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Jiapeng Chong authored
This symbol is not used outside of imu_v11_0.c, so marks it static. Fixes the following w1 warning: drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:302:6: warning: no previous prototype for ‘program_imu_rlc_ram’ [-Wmissing-prototypes]. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Aric Cyr authored
This version brings along the following fixes: * Changes to DP LT fallback behavior to more closely match the DP standard * Added new interfaces for lut pipeline * Restore ref_dtblck value when clk struct is cleared in init_clocks * Fixes DMUB outbox trace in S4 * Fixes lingering DIO FIFO errors when DIO no longer enabled * Reads Golden Settings Table from VBIOS Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Ilya authored
[Why] It's possible for some fallback scenarios to result in infinite looping during link training. [How] This change modifies DP LT fallback behavior to more closely match the DP standard. Keep track of the link rate during the EQ_FAIL fallback, and use it as the maximum link rate for the CR sequence. Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Ilya <Ilya.Bakoulin@amd.com> Signed-off-by:
-
Alvin authored
[Description] ref_dtbclk value is assigned in clk_mgr_construct, but the clks struct is cleared in init_clocks. Make sure to restore the value or we will get 0 value for ref_dtbclk in DCN31. Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by:
-
Hung, Cruise authored
[Why] DMUB Outbox0 read/write pointer not sync after resumed from S4. And that caused old traces were sent to outbox. [How] Disable DMUB Outbox0 interrupt and clear DMUB Outbox0 read/write pointer when resumes from S4. And then enable Outbox0 interrupt before starts DMCUB. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Cruise Hung <Cruise.Hung@amd.com> Signed-off-by:
-
hengzhou authored
[WHY] Very low rate to cause memory access issue while resetting DMCUB after the halt command was sent to it. The process of stopping fw of DMCUB may be timeout, that means it is not in idle state, such as the window frames may still be kept in cache, so reset by force will cause MMHUB hang. [HOW] After the halt command was sent, keep checking the DMCUB state until it is idle. Reviewed-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
hengzhou <Hengyong.Zhou@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] When enabling an HPO stream for the first time after having previously enabled a DIO stream there may be lingering DIO FIFO errors even though the DIO is no longer enabled. These can cause display clock change to hang if we don't apply the OTG disable workaround since the ramping logic is tied to OTG on. [How] The workaround wasn't being applied in the sequence of: 1 DIO stream 0 streams 1 HPO stream because current_state has no stream or planes in its context - and it's only swapped after optimize has finished. We should be using the incoming context instead to determine whether this logic is needed or not. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
-
Leung, Martin authored
why and how: Revert this change. It was causing a black screen with certain blocks Reviewed-by:
George Shen <George.Shen@amd.com> Acked-by:
Leung, Martin <Martin.Leung@amd.com> Signed-off-by:
-
Sherry Wang authored
[Why] Dmub read AUX_DPHY_RX_CONTROL0 from Golden Setting Table, but driver will set it to default value 0x103d1110, which causes issue in some case [How] Remove the driver code, use the value set by dmub in dp_aux_init Reviewed-by:
Sherry Wang <YAO.WANG1@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.19-2022-05-26-2' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-05-26-2: amdgpu: - Update fdinfo to the common drm format UAPI: - Add VM_NOALLOC GPUVM attribute to prevent buffers for going into the MALL Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that can be discarded on eviction Mesa code which uses these: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220526202546.66860-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.19-2022-05-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-05-26: amdgpu: - Link training fixes - DPIA fixes - Misc code cleanups - Aux fixes - Hotplug fixes - More FP clean up - Misc GFX9/10 fixes - Fix a possible memory leak in SMU shutdown - SMU 13 updates - RAS fixes - TMZ fixes - GC 11 updates - SMU 11 metrics fixes - Fix coverage blend mode for overlay plane - Note DDR vs LPDDR memory - Fuzz fix for CS IOCTL - Add new PCI DID amdkfd: - Clean up hive setup - Misc fixes radeon: - Fix a possible NULL pointer dereference Signed-off-by:
-
- 26 May, 2022 15 commits
-
-
Christian König authored
This is enough to get gputop working :) v2: rebase and some addition cleanup Signed-off-by:
-
Christian König authored
Convert fdinfo format to one documented in drm-usage-stats.rst. It turned out that the existing implementation was actually completely nonsense. The calculated percentages indeed represented the usage of the engine, but with varying time slices. So 10% usage for application A could mean something completely different than 10% usage for application B. Completely nuke that and just use the now standardized nanosecond interface. v2: drop the documentation change for now, nuke percentage calculation v3: only account for each hw_ip, move the time_spend to the ctx mgr. v4: move general ctx changes into separate patch, rework the fdinfo to ctx_mgr interface so that all usages are calculated at once, drop some unecessary and dangerous refcount dance. v5: add one more comment how we calculate the time spend Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Christian König authored
Increase the minor version number to indicate that the new flags are available. Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Christian König authored
Add the AMDGPU_VM_NOALLOC flag to let userspace control MALL allocation. v2: also add the flag to the allowed flags. Signed-off-by:
-
Christian König authored
Add a AMDGPU_GEM_CREATE_DISCARDABLE flag to note that the content of a BO doesn't needs to be preserved during eviction. KFD was already using a similar functionality for SVM BOs so replace the internal flag with the new UAPI. Signed-off-by:
-
Alex Deucher authored
Add a beige goby PCI ID. Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Lijo Lazar authored
When powerplay is not enabled, return AUTO as default level. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Acked-by:
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by:
-
Dave Airlie authored
Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018Signed-off-by:
-
Alex Deucher authored
Some applications want to know whether the memory is LP or not. Reviewed-by:
-
Candice Li authored
Check shared buf instead of init flag for xgmi ta shared buf init during xgmi ta initialization. Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Prike Liang authored
On the psp13 series use ta_firmware_header_v2_0 and the asd firmware was buildin ta, so needn't request asd firmware separately. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Alex Deucher authored
Validate the VCN and SDMA instances against the driver structure sizes to make sure we don't get into a situation where the firmware reports more instances than the driver supports. Reviewed-by:
-
Sung Joon Kim authored
According to the KMS man page, there is a "Coverage" alpha blend mode that assumes the pixel color values have NOT been pre-multiplied and will be done when the actual blending to the background color values happens. Previously, this mode hasn't been enabled in our driver and it was assumed that all normal overlay planes are pre-multiplied by default. When a 3rd party app is used to input a image in a specific format, e.g. PNG, as a source of a overlay plane to blend with the background primary plane, the pixel color values are not pre-multiplied. So by adding "Coverage" blend mode, our driver will support those cases. Issue fixed: Overlay plane alpha channel blending is incorrect Issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/1769 Reference: https://dri.freedesktop.org/docs/drm/gpu/drm-kms.html#plane-composition-properties Adding Coverage support also enables IGT kms_plane_alpha_blend Coverage subtests: 1. coverage-7efc 2. coverage-vs-premult-vs-constant Changes 1. Add DRM_MODE_BLEND_COVERAGE blend mode capability 2. Add "pre_multiplied_alpha" flag for Coverage case 3. Read the correct flag and set the DCN MPCC pre_multiplied register bit (only on overlay plane) Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1769Signed-off-by:
Sung Joon Kim <Sungjoon.Kim@amd.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
