- 28 Jul, 2019 40 commits
-
-
Chris Wilson authored
commit f5b07b04 upstream. If we have to drop the seqcount & rcu lock to perform a krealloc, we have to restart the loop. In doing so, be careful not to lose track of the already acquired exclusive fence. Fixes: fedf5413 ("dma-buf: Restart reservation_object_get_fences_rcu() after writes") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: stable@vger.kernel.org #v4.10 Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190604125323.21396-1-chris@chris-wilson.co.ukSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jérôme Glisse authored
commit 5e383a97 upstream. The debugfs take reference on fence without dropping them. Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: stable@vger.kernel.org Reviewed-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181206161840.6578-1-jglisse@redhat.comSigned-off-by:
-
Aya Levin authored
[ Upstream commit 99d31cbd ] Fix tx reporter's diagnose callback. Propagate error when failing to gather diagnostics information or failing to print diagnostic data per queue. Fixes: de8650a8 ("net/mlx5e: Add tx reporter support") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit 39825350 ] Fix timeout recover function to return a meaningful return value. When an interrupt was not sent by the FW, return IO error instead of 'true'. Fixes: c7981bea ("net/mlx5e: Fix return status of TX reporter timeout recover") Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit db849faa ] CQE checksum full mode in new HW, provides a full checksum of rx frame. Covering bytes starting from eth protocol up to last byte in the received frame (frame_size - ETH_HLEN), as expected by the stack. Fixing up skb->csum by the driver is not required in such case. This fix is to avoid wrong checksum calculation in drivers which already support the new hardware with the new checksum mode. Fixes: 85327a9c ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by:
-
Eli Britstein authored
[ Upstream commit 914adbb1 ] GRE entropy calculation is a single bit per card, and not per port. Force disable GRE entropy calculation upon the first GRE encap rule, and release the force at the last GRE encap rule removal. This is done per port. Fixes: 97417f61 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation") Signed-off-by:
Eli Britstein <elibr@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 618bac45 ] Neither drivers nor the tls offload code currently supports TLS version 1.3. Check the TLS version when installing connection state. TLS 1.3 will just fallback to the kernel crypto for now. Fixes: 130b392c ("net: tls: Add tls 1.3 support") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 13aecb17 ] David reports that RPC applications which use epoll() occasionally get stuck, and that TLS ULP causes the kernel to not wake applications, even though read() will return data. This is indeed true. The ctx->rx_list which holds partially copied records is not consulted when deciding whether socket is readable. Note that SO_RCVLOWAT with epoll() is and has always been broken for kernel TLS. We'd need to parse all records from the TCP layer, instead of just the first one. Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Reported-by:
David Beckett <david.beckett@netronome.com> Signed-off-by:
-
Frank de Brabander authored
[ Upstream commit cecaa76b ] If mmap() fails it returns MAP_FAILED, which is defined as ((void *) -1). The current if-statement incorrectly tests if *ring is NULL. Fixes: 358be656 ("selftests/net: add txring_overwrite") Signed-off-by:
Frank de Brabander <debrabander@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 4638faac ] sock_efree() releases the sock refcnt, if we don't hold this refcnt when setting skb->destructor to it, the refcnt would not be balanced. This leads to several bug reports from syzbot. I have checked other users of sock_efree(), all of them hold the sock refcnt. Fixes: c8c8218e ("netrom: fix a memory leak in nr_rx_frame()") Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit c8c8218e ] When the skb is associated with a new sock, just assigning it to skb->sk is not sufficient, we have to set its destructor to free the sock properly too. Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com Signed-off-by:
-
Andreas Steinmetz authored
[ Upstream commit 7d8b16b9 ] Fix checksumming after decryption. Signed-off-by:
Andreas Steinmetz <ast@domdv.de> Signed-off-by:
-
Andreas Steinmetz authored
[ Upstream commit 095c02da ] Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS. Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 2446a68a ] Don't cache eth dest pointer before calling pskb_may_pull. Fixes: cf0f02d0 ("[BRIDGE]: use llc for receiving STP packets") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 3d26eb8a ] We would cache ether dst pointer on input in br_handle_frame_finish but after the neigh suppress code that could lead to a stale pointer since both ipv4 and ipv6 suppress code do pskb_may_pull. This means we have to always reload it after the suppress code so there's no point in having it cached just retrieve it directly. Fixes: 057658cb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 3b26a5d0 ] We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may call pskb_may_pull afterwards and end up using a stale pointer. So use the header directly, it's just 1 place where it's needed. Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Signed-off-by:
Martin Weinelt <martin@linuxlounge.net> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit e57f6185 ] We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by:
-
Aya Levin authored
[ Upstream commit ef1ce7d7 ] Check return value from mlx5e_attach_netdev, add error path on failure. Fixes: 48935bbb ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Peter Kosyh authored
[ Upstream commit 107e47cc ] vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by:
Peter Kosyh <p.kosyh@gmail.com> Reviewed-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit e858faf5 ] If an app is playing tricks to reuse a socket via tcp_disconnect(), bytes_acked/received needs to be reset to 0. Otherwise tcp_info will report the sum of the current and the old connection.. Cc: Eric Dumazet <edumazet@google.com> Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info") Fixes: bdd1f9ed ("tcp: add tcpi_bytes_received to tcp_info") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8d650cde ] Neal reported incorrect use of ns_capable() from bpf hook. bpf_setsockopt(...TCP_CONGESTION...) -> tcp_set_congestion_control() -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN) -> ns_capable_common() -> current_cred() -> rcu_dereference_protected(current->cred, 1) Accessing 'current' in bpf context makes no sense, since packets are processed from softirq context. As Neal stated : The capability check in tcp_set_congestion_control() was written assuming a system call context, and then was reused from a BPF call site. The fix is to add a new parameter to tcp_set_congestion_control(), so that the ns_capable() call is only performed under the right context. Fixes: 91b5b21c ("bpf: Add support for changing congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b617158d ] Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:
Andrew Prout <aprout@ll.mit.edu> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
-
Takashi Iwai authored
[ Upstream commit a261e379 ] The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496Reported-and-tested-by:
Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 9b6c0887 ] Now when sctp_connect() is called with a wrong sa_family, it binds to a port but doesn't set bp->port, then sctp_get_af_specific will return NULL and sctp_connect() returns -EINVAL. Then if sctp_bind() is called to bind to another port, the last port it has bound will leak due to bp->port is NULL by then. sctp_connect() doesn't need to bind ports, as later __sctp_connect will do it if bp->port is NULL. So remove it from sctp_connect(). While at it, remove the unnecessary sockaddr.sa_family len check as it's already done in sctp_inet_connect. Fixes: 644fbdea ("sctp: fix the issue that flags are ignored when using kernel_connect") Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 4d141581 ] It allocates the extended area for outbound streams only on sendmsg calls, if they are not yet allocated. When using the priority stream scheduler, this initialization may imply into a subsequent allocation, which may fail. In this case, it was aborting the stream scheduler initialization but leaving the ->ext pointer (allocated) in there, thus in a partially initialized state. On a subsequent call to sendmsg, it would notice the ->ext pointer in there, and trip on uninitialized stuff when trying to schedule the data chunk. The fix is undo the ->ext initialization if the stream scheduler initialization fails and avoid the partially initialized state. Although syzkaller bisected this to commit 4ff40b86 ("sctp: set chunk transport correctly when it's a new asoc"), this bug was actually introduced on the commit I marked below. Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Tested-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit e835ada0 ] If sendmsg() or sendmmsg() is called on a connected socket that hasn't had bind() called on it, then an oops will occur when the kernel tries to connect the call because no local endpoint has been allocated. Fix this by implicitly binding the socket if it is in the RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state. Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this to prevent further attempts to bind it. This can be tested with: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> static const unsigned char inet6_addr[16] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa }; int main(void) { struct sockaddr_rxrpc srx; struct cmsghdr *cm; struct msghdr msg; unsigned char control[16]; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = 0x21; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = 0x1c; srx.transport.sin6.sin6_family = AF_INET6; srx.transport.sin6.sin6_port = htons(0x4e22); srx.transport.sin6.sin6_flowinfo = htons(0x4e22); srx.transport.sin6.sin6_scope_id = htons(0xaa3b); memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16); cm = (struct cmsghdr *)control; cm->cmsg_len = CMSG_LEN(sizeof(unsigned long)); cm->cmsg_level = SOL_RXRPC; cm->cmsg_type = RXRPC_USER_CALL_ID; *(unsigned long *)CMSG_DATA(cm) = 0; msg.msg_name = NULL; msg.msg_namelen = 0; msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = control; msg.msg_controllen = cm->cmsg_len; msg.msg_flags = 0; fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET); connect(fd, (struct sockaddr *)&srx, sizeof(srx)); sendmsg(fd, &msg, 0); return 0; } Leading to the following oops: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_connect_call+0x42/0xa01 ... Call Trace: ? mark_held_locks+0x47/0x59 ? __local_bh_enable_ip+0xb6/0xba rxrpc_new_client_call+0x3b1/0x762 ? rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_sendmsg+0x16b/0x1b5 sock_sendmsg+0x2d/0x39 ___sys_sendmsg+0x1a4/0x22a ? release_sock+0x19/0x9e ? reacquire_held_locks+0x136/0x160 ? release_sock+0x19/0x9e ? find_held_lock+0x2b/0x6e ? __lock_acquire+0x268/0xf73 ? rxrpc_connect+0xdd/0xe4 ? __local_bh_enable_ip+0xb6/0xba __sys_sendmsg+0x5e/0x94 do_syscall_64+0x7d/0x1bf entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 2341e077 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op") Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit fe4e8db0 ] On RTL8411b the RX unit gets confused if the PHY is powered-down. This was reported in [0] and confirmed by Realtek. Realtek provided a sequence to fix the RX unit after PHY wakeup. The issue itself seems to have been there longer, the Fixes tag refers to where the fix applies properly. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075 Fixes: a99790bf ("r8169: Reinstate ASPM Support") Tested-by:
Ionut Radu <ionut.radu@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Yang Wei authored
[ Upstream commit dd006fc4 ] The frags_q is not properly initialized, it may result in illegal memory access when conn_info is NULL. The "goto free_exit" should be replaced by "goto exit". Signed-off-by:
Yang Wei <albin_yang@163.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit acd3e96d ] Commit 86029d10 ("tls: zero the crypto information from tls_context before freeing") added memzero_explicit() calls to clear the key material before freeing struct tls_context, but it missed tls_device.c has its own way of freeing this structure. Replace the missing free. Fixes: 86029d10 ("tls: zero the crypto information from tls_context before freeing") Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 4993e5b3 ] Ben Hutchings says: "This is the wrong place to change the queue mapping. stmmac_xmit() is called with a specific TX queue locked, and accessing a different TX queue results in a data race for all of that queue's state. I think this commit should be reverted upstream and in all stable branches. Instead, the driver should implement the ndo_select_queue operation and override the queue mapping there." Fixes: c5acdbee ("net: stmmac: Send TSO packets always from Queue 0") Suggested-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 3f05e688 ] For qdisc's that support TC filters and set TCQ_F_CAN_BYPASS, notably fq_codel, it makes no sense to let packets bypass the TC filters we setup in any scenario, otherwise our packets steering policy could not be enforced. This can be reproduced easily with the following script: ip li add dev dummy0 type dummy ifconfig dummy0 up tc qd add dev dummy0 root fq_codel tc filter add dev dummy0 parent 8001: protocol arp basic action mirred egress redirect dev lo tc filter add dev dummy0 parent 8001: protocol ip basic action mirred egress redirect dev lo ping -I dummy0 192.168.112.1 Without this patch, packets are sent directly to dummy0 without hitting any of the filters. With this patch, packets are redirected to loopback as expected. This fix is not perfect, it only unsets the flag but does not set it back because we have to save the information somewhere in the qdisc if we really want that. Note, both fq_codel and sfq clear this flag in their ->bind_tcf() but this is clearly not sufficient when we don't use any class ID. Fixes: 23624935 ("net_sched: TCQ_F_CAN_BYPASS generalization") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit 0cea0e11 ] The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
-
John Hurley authored
[ Upstream commit 0e3183cd ] Skbs may have their checksum value populated by HW. If this is a checksum calculated over the entire packet then the CHECKSUM_COMPLETE field is marked. Changes to the data pointer on the skb throughout the network stack still try to maintain this complete csum value if it is required through functions such as skb_postpush_rcsum. The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when changes are made to packet data without a push or a pull. This occurs when the ethertype of the MAC header is changed or when MPLS lse fields are modified. The modification is carried out using the csum_partial function to get the csum of a buffer and add it into the larger checksum. The buffer is an inversion of the data to be removed followed by the new data. Because the csum is calculated over 16 bits and these values align with 16 bits, the effect is the removal of the old value from the CHECKSUM_COMPLETE and addition of the new value. However, the csum fed into the function and the outcome of the calculation are also inverted. This would only make sense if it was the new value rather than the old that was inverted in the input buffer. Fix the issue by removing the bit inverts in the csum_partial calculation. The bug was verified and the fix tested by comparing the folded value of the updated CHECKSUM_COMPLETE value with the folded value of a full software checksum calculation (reset skb->csum to 0 and run skb_checksum_complete(skb)). Prior to the fix the outcomes differed but after they produce the same result. Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel") Fixes: bc7cc599 ("openvswitch: update checksum in {push,pop}_mpls") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 071c3798 ] Neigh timer can be scheduled multiple times from userspace adding multiple neigh entries and forcing the neigh timer scheduling passing NTF_USE in the netlink requests. This will result in a refcount leak and in the following dump stack: [ 32.465295] NEIGH: BUG, double timer add, state is 8 [ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65 [ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 32.465313] Call Trace: [ 32.465318] dump_stack+0x7c/0xc0 [ 32.465323] __neigh_event_send+0x20c/0x880 [ 32.465326] ? ___neigh_create+0x846/0xfb0 [ 32.465329] ? neigh_lookup+0x2a9/0x410 [ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800 [ 32.465334] neigh_add+0x4f8/0x5e0 [ 32.465337] ? neigh_xmit+0x620/0x620 [ 32.465341] ? find_held_lock+0x85/0xa0 [ 32.465345] rtnetlink_rcv_msg+0x204/0x570 [ 32.465348] ? rtnl_dellink+0x450/0x450 [ 32.465351] ? mark_held_locks+0x90/0x90 [ 32.465354] ? match_held_lock+0x1b/0x230 [ 32.465357] netlink_rcv_skb+0xc4/0x1d0 [ 32.465360] ? rtnl_dellink+0x450/0x450 [ 32.465363] ? netlink_ack+0x420/0x420 [ 32.465366] ? netlink_deliver_tap+0x115/0x560 [ 32.465369] ? __alloc_skb+0xc9/0x2f0 [ 32.465372] netlink_unicast+0x270/0x330 [ 32.465375] ? netlink_attachskb+0x2f0/0x2f0 [ 32.465378] netlink_sendmsg+0x34f/0x5a0 [ 32.465381] ? netlink_unicast+0x330/0x330 [ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20 [ 32.465388] ? netlink_unicast+0x330/0x330 [ 32.465391] sock_sendmsg+0x91/0xa0 [ 32.465394] ___sys_sendmsg+0x407/0x480 [ 32.465397] ? copy_msghdr_from_user+0x200/0x200 [ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40 [ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250 [ 32.465407] ? __wake_up_common_lock+0xcb/0x110 [ 32.465410] ? __wake_up_common+0x230/0x230 [ 32.465413] ? netlink_bind+0x3e1/0x490 [ 32.465416] ? netlink_setsockopt+0x540/0x540 [ 32.465420] ? __fget_light+0x9c/0xf0 [ 32.465423] ? sockfd_lookup_light+0x8c/0xb0 [ 32.465426] __sys_sendmsg+0xa5/0x110 [ 32.465429] ? __ia32_sys_shutdown+0x30/0x30 [ 32.465432] ? __fd_install+0xe1/0x2c0 [ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100 [ 32.465438] ? mark_held_locks+0x24/0x90 [ 32.465441] ? do_syscall_64+0xf/0x270 [ 32.465444] do_syscall_64+0x63/0x270 [ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER' receiving a netlink request with NTF_USE flag set Reported-by:
Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d30 ("neigh: Allow for user space users of the neighbour table") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit b60a7738 ] netfilter did not expect that skb_dst_force() can cause skb to lose its dst entry. I got a bug report with a skb->dst NULL dereference in netfilter output path. The backtrace contains nf_reinject(), so the dst might have been cleared when skb got queued to userspace. Other users were fixed via if (skb_dst(skb)) { skb_dst_force(skb); if (!skb_dst(skb)) goto handle_err; } But I think its preferable to make the 'dst might be cleared' part of the function explicit. In netfilter case, skb with a null dst is expected when queueing in prerouting hook, so drop skb for the other hooks. v2: v1 of this patch returned true in case skb had no dst entry. Eric said: Say if we have two skb_dst_force() calls for some reason on the same skb, only the first one will return false. This now returns false even when skb had no dst, as per Erics suggestion, so callers might need to check skb_dst() first before skb_dst_force(). Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Baruch Siach authored
[ Upstream commit 7b75e49d ] Add a 1ms delay after reset deactivation. Otherwise the chip returns bogus ID value. This is observed with 88E6390 (Peridot) chip. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
-
Justin Chen authored
[ Upstream commit 35cbef98 ] Currently we silently ignore filters if we cannot meet the filter requirements. This will lead to the MAC dropping packets that are expected to pass. A better solution would be to set the NIC to promisc mode when the required filters cannot be met. Also correct the number of MDF filters supported. It should be 17, not 16. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 54851aa9 ] When a route needs to be appended to an existing multipath route, fib6_add_rt2node() first appends it to the siblings list and increments the number of sibling routes on each sibling. Later, the function notifies the route via call_fib6_entry_notifiers(). In case the notification is vetoed, the route is not unlinked from the siblings list, which can result in a use-after-free. Fix this by unlinking the route from the siblings list before returning an error. Audited the rest of the call sites from which the FIB notification chain is called and could not find more problems. Fixes: 2233000c ("net/ipv6: Move call_fib6_entry_notifiers up for route adds") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by:
-
David Ahern authored
[ Upstream commit 49d05fe2 ] Paul reported that l2tp sessions were broken after the commit referenced in the Fixes tag. Prior to this commit rt6_check returned NULL if the rt6_info 'from' was NULL - ie., the dst_entry was disconnected from a FIB entry. Restore that behavior. Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by:
Paul Donohue <linux-kernel@PaulSD.com> Tested-by:
-
Matteo Croce authored
[ Upstream commit 2e605463 ] Avoid the situation where an IPV6 only flag is applied to an IPv4 address: # ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global noprefixroute dummy0 valid_lft forever preferred_lft forever Or worse, by sending a malicious netlink command: # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0 valid_lft forever preferred_lft forever Signed-off-by:
Matteo Croce <mcroce@redhat.com> Reviewed-by:
-
