- 06 Feb, 2017 2 commits
-
-
Scott Bauer authored
This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Scott Bauer authored
Signed-off-by:
-
- 01 Feb, 2017 3 commits
-
-
Tahsin Erdogan authored
blk_set_queue_dying() does not acquire queue lock before it calls blk_queue_for_each_rl(). This allows a racing blkg_destroy() to remove blkg->q_node from the linked list and have blk_queue_for_each_rl() loop infitely over the removed blkg->q_node list node. Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
-
Bart Van Assche authored
Since __bio_map_user() and bio_map_user() have been removed, update the comments that still refer to these functions. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> References: commit ddad8dd0 ("block: use blk_rq_map_user_iov to implement blk_rq_map_user") Cc: Ming Lei <tom.leiming@gmail.com> Reviewed-by:
-
Jens Axboe authored
We rely on blk_mq_get_driver_tag() not failing if 'wait' is true, but it currently fails in that case if the queue happens to be stopped at the time of the call. We don't need to check for stopped here, it's just assigning the tag. If the queue is stopped, we'll handle it when attempting to run the queue. This fixes a stall/crash on flush intensive workloads, where we proceed to process a flush that doesn't have a valid tag assigned. Signed-off-by:
-
- 31 Jan, 2017 13 commits
-
-
Keith Busch authored
This patch sets the aborted flag only if an abort was sent, reducing excessive kernel message spamming for completed IO that wasn't actually aborted. Reported-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Javier González authored
In order to register through the sysfs interface, a driver needs to know its kobject. On a disk structure, this happens when the partition information is added (device_add_disk), which for lightnvm takes place after the target has been initialized. This means that on target initialization, the kboject has not been created yet. This patch adds a target function to let targets initialize their own kboject as a child of the disk kobject. Signed-off-by:
Javier González <javier@cnexlabs.com> Added exit typedef and passed gendisk instead of void pointer for exit. Signed-off-by:
Matias Bjørling <matias@cnexlabs.com> Signed-off-by:
-
Javier González authored
Fix a memory leak when target creation fails. More specifically, free the entire device structure given to the target (tgt_dev). Signed-off-by:
-
Javier González authored
Let the host differentiate between a read error and a CRC check error on the device side. Signed-off-by:
-
Matias Bjørling authored
When the lightnvm core had the "gennvm" layer between the device and the target, there was a need for the core to be able to figure out which target it should send an end_io callback to. Leading to a "double" end_io, first for the media manager instance, and then for the target instance. Now that core and gennvm is merged, there is no longer a need for this, and a single end_io callback will do. Signed-off-by:
-
Matias Bjørling authored
Enable user-space to issue vector I/O commands through ioctls. To issue a vector I/O, the ppa list with addresses is also required and must be mapped for the controller to access. For each ioctl, the result and status bits are returned as well, such that user-space can retrieve the open-channel SSD completion bits. The implementation covers the traditional use-cases of bad block management, and vectored read/write/erase. Signed-off-by:
Simon A.F. Lund <slund@cnexlabs.com> Signed-off-by:
-
Matias Bjørling authored
The number of configuration groups has been limited to one in current code, even if there is support for up to four. With the introduction of the open-channel SSD 1.3 specification, only a single group is exposed onwards. Reflect this in the nvm_id structure. Signed-off-by:
-
Matias Bjørling authored
Going from target specific ppa addresses to device was accomplished by first converting target to generic ppa addresses and generic to device addresses. The conversion was either open-coded or used the built-in nvm_trans_* and nvm_map_* functions for conversion. Simplify the interface and cleanup the calls to provide clean functions that now either take a list of ppas or a nvm_rq, and is exposed through: void nvm_ppa_* - target to/from device with a list of PPAs, void nvm_rq_* - target to/from device with a nvm_rq. Signed-off-by:
-
Matias Bjørling authored
The only check there was done was a debugging check. Remove it and replace the return value with void to reduce error checking. Signed-off-by:
-
Matias Bjørling authored
Since the merge of gennvm and core, there is no longer a need for the device specific bad block functions. Signed-off-by:
-
Matias Bjørling authored
The nvm_submit_ppa* functions are no longer needed after gennvm and core have been merged. Signed-off-by:
-
Matias Bjørling authored
After gennvm and core have been merged, there are no more callers to nvm_erase_ppa. Therefore collapse the device specific and target specific erase functions. Signed-off-by:
-
Matias Bjørling authored
For the first iteration of Open-Channel SSDs, it was anticipated that there could be various media managers on top of an open-channel SSD, such to allow vendors to plug in their own host-side FTLs, without the media manager in between. Now that an Open-Channel SSD is exposed as a traditional block device, there is no longer a need for this. Therefore lets merge the gennvm code with core and simplify the stack. Signed-off-by:
-
- 27 Jan, 2017 19 commits
-
-
Omar Sandoval authored
This fixes a couple of problems: 1. In the !CONFIG_DEBUG_FS case, the stub definitions were bogus. 2. In the !CONFIG_BLOCK case, blk-mq-debugfs.c shouldn't be compiled at all. Fix the stub definitions and add a CONFIG_BLK_DEBUG_FS Kconfig option. Fixes: 07e4fead ("blk-mq: create debugfs directory tree") Signed-off-by:
Omar Sandoval <osandov@fb.com> Augment Kconfig description. Signed-off-by:
-
Jens Axboe authored
Use op_is_flush() where applicable. Signed-off-by: -
Jens Axboe authored
Instead of letting the caller check this and handle the details of inserting a flush request, put the logic in the scheduler insertion function. This fixes direct flush insertion outside of the usual make_request_fn calls, like from dm via blk_insert_cloned_request(). Signed-off-by: -
Christoph Hellwig authored
This centralizes the checks for bios that needs to be go into the flush state machine. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
-
Jens Axboe authored
When we invoke dispatch_requests(), the scheduler empties everything into the passed in list. This isn't always a good thing, since it means that we remove items that we could have potentially merged with. Change the function to dispatch single requests at the time. If we do that, we can backoff exactly at the point where the device can't consume more IO, and leave the rest with the scheduler for better merging and future dispatch decision making. Signed-off-by:
Hannes Reinecke <hare@suse.com>
-
Jens Axboe authored
If we have both multiple hardware queues and shared tag map between devices, we need to ensure that we propagate the hardware queue restart bit higher up. This is because we can get into a situation where we don't have any IO pending on a hardware queue, yet we fail getting a tag to start new IO. If that happens, it's not enough to mark the hardware queue as needing a restart, we need to bubble that up to the higher level queue as well. Signed-off-by:
-
Jens Axboe authored
We don't want to hold on to this resource when we have a scheduler attached. Signed-off-by:
-
Jens Axboe authored
Once we mark the queue as needing a restart, re-check if we can get a driver tag. This fixes a theoretical issue where the needed IO completes _after_ blk_mq_get_driver_tag() fails, but before we manage to set the restart bit. Signed-off-by:
-
Jens Axboe authored
We'll use the same criteria for whether we need to run the queue sync or async when we have a scheduler, as we do without one. Signed-off-by:
-
Omar Sandoval authored
These counters aren't as out-of-place in sysfs as the other stuff, but debugfs is a slightly better home for them. Reviewed-by:
-
Omar Sandoval authored
These statistics _might_ be useful to userspace, but it's better not to commit to an ABI for these yet. Also, the dispatched file in sysfs couldn't be cleared, so make it clearable like the others in debugfs. Reviewed-by:
-
Omar Sandoval authored
These can be used to debug issues like tag leaks and stuck requests. Reviewed-by:
-
Omar Sandoval authored
These are very tied to the blk-mq tag implementation, so exposing them to sysfs isn't a great idea. Move the debugging information to debugfs and add basic entries for the number of tags and the number of reserved tags to sysfs. Reviewed-by:
-
Omar Sandoval authored
This is useful for debugging problems where we've gotten stuck with requests in the software queues. Reviewed-by:
-
Omar Sandoval authored
This is useful debugging information that will be used in the blk-mq debugfs directory. Reviewed-by:
-
Omar Sandoval authored
The request pointers by themselves aren't super useful. Reviewed-by:
-
Omar Sandoval authored
These lists are only useful for debugging; they definitely don't belong in sysfs. Putting them in debugfs also removes the limitation of a single page of output. Reviewed-by:
-
Omar Sandoval authored
hctx->state could come in handy for bugs where the hardware queue gets stuck in the stopped state, and hctx->flags is just useful to know. Signed-off-by:
-
Omar Sandoval authored
In preparation for putting blk-mq debugging information in debugfs, create a directory tree mirroring the one in sysfs: # tree -d /sys/kernel/debug/block /sys/kernel/debug/block |-- nvme0n1 | `-- mq | |-- 0 | | `-- cpu0 | |-- 1 | | `-- cpu1 | |-- 2 | | `-- cpu2 | `-- 3 | `-- cpu3 `-- vda `-- mq `-- 0 |-- cpu0 |-- cpu1 |-- cpu2 `-- cpu3 Also add the scaffolding for the actual files that will go in here, either under the hardware queue or software queue directories. Reviewed-by:
-
- 26 Jan, 2017 2 commits
-
-
Jens Axboe authored
We don't trigger this from the normal IO path, since we always use blocking allocations from there. But Bart saw it testing multipath dm, since that is a heavy user of atomic request allocations in the map and clone path. Reported-by:
-
Jens Axboe authored
If we come in from blk_mq_alloc_requst() with NOWAIT set in flags, we must ensure that we don't later overwrite that in blk_mq_sched_get_request(). Initialize alloc_data->flags before passing it in. Reported-by:
-
- 25 Jan, 2017 1 commit
-
-
Jens Axboe authored
If we have a scheduler attached, we have two sets of tags. We don't want to apply our active queue throttling for the scheduler side of tags, that only applies to driver tags since that's the resource we need to dispatch an IO. Signed-off-by:
-
