Added netlink attrs to configure FOU encapsulation for GRE, netlink
handling of these flags, and properly adjust MTU for encapsulation.
ip_tunnel_encap is called from ip_tunnel_xmit to actually perform FOU
encapsulation.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add netlink handling for IP tunnel encapsulation parameters and
and adjustment of MTU for encapsulation.  ip_tunnel_encap is called
from ip_tunnel_xmit to actually perform FOU encapsulation.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added netlink handling of IP tunnel encapulation paramters, properly
adjust MTU for encapsulation. Added ip_tunnel_encap call to
ipip6_tunnel_xmit to actually perform FOU encapsulation.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes IP tunnel to support (secondary) encapsulation,
Foo-over-UDP. Changes include:

1) Adding tun_hlen as the tunnel header length, encap_hlen as the
   encapsulation header length, and hlen becomes the grand total
   of these.
2) Added common netlink define to support FOU encapsulation.
3) Routines to perform FOU encapsulation.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement fou_gro_receive and fou_gro_complete, and populate these
in the correponsing udp_offloads for the socket. Added ipproto to
udp_offloads and pass this from UDP to the fou GRO routine in proto
field of napi_gro_cb structure.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch provides a receive path for foo-over-udp. This allows
direct encapsulation of IP protocols over UDP. The bound destination
port is used to map to an IP protocol, and the XFRM framework
(udp_encap_rcv) is used to receive encapsulated packets. Upon
reception, the encapsulation header is logically removed (pointer
to transport header is advanced) and the packet is reinjected into
the receive path with the IP protocol indicated by the mapping.

Netlink is used to configure FOU ports. The configuration information
includes the port number to bind to and the IP protocol corresponding
to that port.

This should support GRE/UDP
(http://tools.ietf.org/html/draft-yong-tsvwg-gre-in-udp-encap-02),
as will as the other IP tunneling protocols (IPIP, SIT).
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Want to be able to use these in foo-over-udp offloads, etc.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc_u32_sel 'sel' in tc_u_knode expects to be the last element in the
structure and pads the structure with tc_u32_key fields for each key.

 kzalloc(sizeof(*n) + s->nkeys*sizeof(struct tc_u32_key), GFP_KERNEL)

CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pfifo_fast and htb use skb lists, without needing their spinlocks.
(They instead use the standard qdisc lock)

We can use __skb_queue_head_init() instead of skb_queue_head_init()
to be consistent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
bnx2x: Support new Multi-function modes

This patch series adds support for 2 new Multi-function modes -
Unified Fabric Port [UFP] as well as nic partitioning 1.5 [NPAR1.5].

With the addition of the new multi-function modes, the series also
revises some of the storage-related multi-function macros.

[Do notice this series has several small issues with checkpatch]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When using new Multi-function modes it's possible that due to incompatible
configuration management FW will fallback into an existing mode.

Notice that at the moment this fallback is exactly the same as the already
existing switch-independent multi-function mode, but we still use existing
infrastructure to hold this information [in case some small differences will
arise in the future].
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for a new multi-function mode based on the Unified Fabric Port
system specifications.
Support includes configuration of:
  1. Outer vlan tags.
  2. Bandwidth settings.
  3. Virtual link enable/disable.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rearrange macros to query for storage-only modes in different MF environment.
Improves the readibility and maintainability of the code. E.g.:
	-	if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp))
	+	if (IS_MF_STORAGE_ONLY(bp))

In addition, this removes the need for bnx2x_is_valid_ether_addr().
Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Broadcom BCM7xxx PHY workaround update

This patch sets the change to of_phy_connect() that you have seen before,
this time with the full context of why it is useful and applicable here.

Due to some design decision, the internal PHY on Broadcom BCM7xxx chips
is not entirely self contained and does not report its internal revision
through MII_PHYSID2, that is left to external PHY designs.

This forces us to get the PHY revision from the GENET and SF2 switch drivers
because those two peripherals integrate such a PHY and do contain the PHY
revision in their registers.

The approach taken here is hopefully easy to extend to similar needs for
other chips/ as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the GENET and SF2 drivers have been updated to communicate us
what is the revision of the BCM7xxx integrated PHY, utilize that
information in the config_init() callback to call into the appropriate
workaround function based on our revision.

While at it, we also print the revision and patch level to help debug
new chips.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The integrated BCM7xxx PHY contains no useful revision information
in its MII_PHYSID2 bits 3:0, that information is instead contained in
the SWITCH_REG_PHY_REVISION register.

Read this register, store its value, and return it by implementing the
dsa_switch::get_phy_flags() callback accordingly. The register layout is
already matching what the BCM7xxx PHY driver is expecting to find.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some switch drivers (e.g: bcm_sf2) may have to communicate specific
workarounds or flags towards the PHY device driver. Allow switches
driver to be delegated that task by introducing a get_phy_flags()
callback which will do just that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The integrated BCM7xxx PHY contains no useful revision information in
its MII_PHYSID2 bits 3:0, that information is instead contained in the
GENET hardware block.

We already read the GENET 32-bit revision register, so store the
integrated PHY revision in the driver private structure, and then
communicate this revision value to the PHY driver by overriding the
phy_flags value.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we
can remove it from the GENET driver and the broadcom shared header file.
The PHY driver checks the PHY supported bitmask instead.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need for the PHY driver to check PHY_BRCM_100MBPS_WAR since
that is redundant with checking the PHY device supported features. Get
rid of that workaround flag.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Broadcom BCM7xxx internal PHYs do not contain any useful revision
information in the low 4-bits of their MII_PHYSID2 (MII register 3)
which could allow us to properly identify them.

As a result, we need the actual hardware block integrating these PHYs:
GENET or the SF2 switch to tell us what revision they are built with. To
assist with that, add two helper macros for fetching the the PHY
revision and patch level from the struct phy_device::dev_flags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f9a8f83b ("net: phy: remove flags argument from phy_{attach,
connect, connect_direct}") removed the flags argument to the PHY library
calls to: phy_{attach,connect,connect_direct}.

Most Device Tree aware drivers call of_phy_connect() with the flag
argument set to 0, but some of them might want to set a different value
there in order for the PHY driver to key a specific behavior based on
the phy_device::phy_flags value.

Allow such drivers to set custom phy_flags as part of the
of_phy_connect() call since of_phy_connect() does start the PHY state
machine, it will call into the PHY driver config_init() callback which
is usually where a specific phy_flags value is important.

Fixes: f9a8f83b ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extract from sock_alloc_send_pskb() code building skb with frags,
so that we can reuse this in other contexts.

Intent is to use it from tcp_send_rcvq(), tcp_collapse(), ...

We also want to replace some skb_linearize() calls to a more reliable
strategy in pathological cases where we need to reduce number of frags.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we no longer rely on having tcp headers for skbs in receive queue,
tcp repair do not need to build fake ones.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andy Zhou says:

====================
Refactor vxlan and l2tp to use new common UDP tunnel APIs

This patch series add a few more UDP tunnel APIs and refactoring current
UDP tunnel based protocols, vxlan and l2tp to make use of the new APIs.

The added APIs are setup_udp_tunnel_sock(), udp_tunnel_xmit_skb() and
udp_tunnel_sock_release(). Those implementation logics already exist in
current vxlan and l2tp implementation. Move them to common APIs to reduce
code duplications.

Also split udp_tunnel.c into net/ipv4/udp_tunnel.c and
net/ipv6/ip6_udp_tunnel.c to maintain proper IP protocol separation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify l2tp implementation using common UDP tunnel APIs.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simplify vxlan implementation using common UDP tunnel APIs.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added a few more UDP tunnel APIs that can be shared by UDP based
tunnel protocol implementation. The main ones are highlighted below.

setup_udp_tunnel_sock() configures UDP listener socket for
receiving UDP encapsulated packets.

udp_tunnel_xmit_skb() and upd_tunnel6_xmit_skb() transmit skb
using UDP encapsulation.

udp_tunnel_sock_release() closes the UDP tunnel listener socket.
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ip6_udp_tunnel.c for ipv6 UDP tunnel functions to avoid ifdefs
in udp_tunnel.c
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Frank Li says:

====================
net: fec: add interrupt coalescence

improve error handle when parse queue number.
add interrupt coalescence feature.

Change from v2 to v3
 - add error check in fec_enet_set_coalesce
 - fix a run time warning to get clock rate in interrupt
 - fix commit message use TKT number

Change from v1 to v2
 - fix indention
 - use errata number instead of TKT
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When enable three queues on imx6sx enet, and then do tx performance
test with iperf tool, after some time running, tx hang.

Found that:
	If uDMA is running, software set TDAR may cause tx hang.
	If uDMA is in idle, software set TDAR don't cause tx hang.

There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.
The issue exist at i.MX6SX enet IP.

So, the Workaround is checking TDAR status four time, if TDAR cleared by
hardware and then write TDAR, otherwise don't set TDAR.

The patch is only one Workaround for the issue ERR007885.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

when enable interrupt coalesce, 8 BD is not enough.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

i.MX6 SX support interrupt coalescence feature
By default, init the interrupt coalescing frame count threshold and
timer threshold.

Supply the ethtool interfaces as below for user tuning to improve
enet performance:
	rx_max_coalesced_frames
	rx_coalesce_usecs
	tx_max_coalesced_frames
	tx_coalesce_usecs
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

check tx and rx queue seperately.
fix typo, "Invalidate" and "fail".
change pr_err to pr_warn.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 233577a2 ("net: filter: constify detection of pkt_type_offset")
allows us to implement simple PKTTYPE support in sparc JIT
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

reproduce:
  wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
  chmod +x ~/bin/make.cross
  git checkout 4d494cdc
  make.cross ARCH=m68k  m5272c3_defconfig
  make.cross ARCH=m68k

drivers/net/ethernet/freescale/fec.h:262:0: warning: "FEC_R_DES_START" redefined
 #define FEC_R_DES_START(X) ((X == 1) ? FEC_R_DES_START_1 : \
 ^
drivers/net/ethernet/freescale/fec.h:158:0: note: this is the location of the previous definition
 #define FEC_R_DES_START  0x3d0 /* Receive descriptor ring */
 ^
drivers/net/ethernet/freescale/fec.h:265:0: warning: "FEC_X_DES_START" redefined
 #define FEC_X_DES_START(X) ((X == 1) ? FEC_X_DES_START_1 : \

...
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ensures the tcf_exts_init() is called for all cases.

Fixes: 952313bd ("net: sched: cls_cgroup use RCU")
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pravin B Shelar says:

====================
Open vSwitch

Following patches adds recirculation and hash action to OVS.
First patch removes pointer to stack object. Next three patches
does code restructuring which is required for last patch.
Recirculation implementation is changed, according to comments from
David Miller, to avoid using recursive calls in OVS. It is using
queue to record recirc action and deferred recirc is executed at
the end of current actions execution.

v1-v2:
Changed subsystem name in subject to openvswitch
v2-v3:
Added patch to remove pkt_key pointer from skb->cb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When allocating a new structure we also need to call tcf_exts_init
to initialize exts.

A follow up patch might be in order to remove some of this code
and do tcf_exts_assign(). With this we could remove the
tcf_exts_init/tcf_exts_change pattern for some of the classifiers.
As part of the future tcf_actions RCU series this will need to be
done. For now fix the call here.

Fixes e35a8ee5 ("net: sched: fw use RCU")
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tree:   git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git master
head:   54996b52
commit: c7953ef2 [625/646] net: sched: cls_cgroup use RCU

net/sched/cls_cgroup.c:130 cls_cgroup_change() warn: possible memory leak of 'new'
net/sched/cls_cgroup.c:135 cls_cgroup_change() warn: possible memory leak of 'new'
net/sched/cls_cgroup.c:139 cls_cgroup_change() warn: possible memory leak of 'new'

Fixes: c7953ef2 ("net: sched: cls_cgroup use RCU")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>