- 05 Jun, 2017 40 commits
-
-
Leo Yan authored
commit 55da97e3 upstream. In clock driver initialize phase the spinlock is missed to assignment to struct clkgate_separated, finally there have no locking to protect exclusive accessing for clock registers. This bug introduces the console has no output after enable coresight driver on 96boards Hikey; this is because console using UART3, which has shared the same register with coresight clock enabling bit. After applied this patch it can assign lock properly to protect exclusive accessing, and console can work well after enabled coresight modules. Fixes: 0aa0c95f ("clk: hisilicon: add common clock support") Signed-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Kirtika Ruchandani authored
commit 9d504435 upstream. Commit 5fc0f76c introduced Rx stats from debugfs, the function iwl_mvm_reset_frame_stats from that commit defines and sets mcs but does not use it. Compiling iwlwifi with W=1 gives this warning - iwlwifi/mvm/rs.c: In function ‘iwl_mvm_update_frame_stats’: iwlwifi/mvm/rs.c:3074:14: warning: variable ‘mcs’ set but not used [-Wunused-but-set-variable] Fixes: 5fc0f76c (iwlwifi: mvm: add Rx frames statistics via debugfs) Signed-off-by:
Kirtika Ruchandani <kirtika@google.com> Cc: Eyal Shapira <eyal@wizery.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> [bwh: Backported to 3.16: adjust filename, context] Signed-off-by:
-
Johan Hovold authored
commit c6dce262 upstream. Since commit 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") the FTDI driver has been using a receive latency-timer value of 1 ms instead of the device default of 16 ms. The latency timer is used to periodically empty a non-full receive buffer, but a status header is always sent when the timer expires including when the buffer is empty. This means that a two-byte bulk message is received every millisecond also for an otherwise idle port as long as it is open. Let's restore the pre-2009 behaviour which reduces the rate of the status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to 62.5 Hz) by not setting ASYNC_LOW_LATENCY by default. Anyone willing to pay the price for the minimum-latency behaviour should set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool such as setserial (e.g. setserial /dev/ttyUSB0 low_latency). Note that since commit 0cbd81a9 ("USB: ftdi_sio: remove tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but to set a minimal latency timer. Reported-by:
Antoine Aubert <a.aubert@overkiz.com> Fixes: 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Maciej S. Szmigiero authored
commit d2ce4ea1 upstream. Near the beginning of w1_attach_slave_device() we increment a w1 master reference count. Later, when we are going to exit this function without actually attaching a slave device (due to failure of __w1_attach_slave_device()) we need to decrement this reference count back. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Fixes: 9fcbbac5 ("w1: process w1 netlink commands in w1_process thread") Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 61cd1b4c upstream. ds2490 driver was doing USB transfers from / to buffers on a stack. This is not permitted and made the driver non-working with vmapped stacks. Since all these transfers are done under the same bus_mutex lock we can simply use shared buffers in a device private structure for two most common of them. While we are at it, let's also fix a comparison between int and size_t in ds9490r_search() which made the driver spin in this function if state register get requests were failing. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Alexander Stein authored
commit d2522152 upstream. Adjust the bulk message timeout to the other ones (1000ms). Otherwise the following dmesg errors can be seen on a Raspberry Pi: [ 31.492386] Failed to read 1-wire data from 0x81: err=-110. [ 31.504168] 0x81: count=-110, status: [ 31.613404] Failed to read 1-wire data from 0x81: err=-110. [ 31.621915] 0x81: count=-110, status: [ 43.260968] Failed to read 1-wire data from 0x81: err=-110. [ 43.270998] 0x81: count=-110, status: [ 43.379959] Failed to read 1-wire data from 0x81: err=-110. [ 43.388854] 0x81: count=-110, status: Signed-off-by:
Alexander Stein <alexanders83@web.de> Acked-by:
-
Arnd Bergmann authored
commit 8c9b23ff upstream. A clean mips64 build produces no output except for two lines: Checking missing-syscalls for N32 Checking missing-syscalls for O32 On other architectures, there is no output at all, so let's do the same here for the sake of build testing. The 'kecho' macro is used to print the message on a normal build but skip it with 'make -s'. Fixes: e48ce6b8 ("[MIPS] Simplify missing-syscalls for N32 and O32") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15040/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Krzysztof Opasiak authored
commit 33e4c1a9 upstream. As IN request has to be allocated in set_alt() and released in disable() we cannot use mutex to protect it as we cannot sleep in those funcitons. Let's replace this mutex with a spinlock. Tested-by:
David Lechner <david@lechnology.com> Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Krzysztof Opasiak authored
commit aa65d11a upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by:
-
Krzysztof Opasiak authored
commit 20d2ca95 upstream. Requests for out endpoint are allocated in bind() function but never released. This commit ensures that all pending requests are released when we disable out endpoint. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by:
-
Felipe F. Tonello authored
commit 079fe5a6 upstream. This function is shared between gadget functions, so this avoid unnecessary duplicated code and potentially avoid memory leaks. Reviewed-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
Felipe F. Tonello <eu@felipetonello.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> [bwh: Backported to 3.16: adjust filenames] Signed-off-by:
-
Felipe Balbi authored
commit ffb80fc6 upstream. At least macOS seems to be sending ClearFeature(ENDPOINT_HALT) to endpoints which aren't Halted. This makes DWC3's CLEARSTALL command time out which causes several issues for the driver. Instead, let's just return 0 and bail out early. Signed-off-by:
-
Liam Breck authored
commit ba52e757 upstream. Reading both fault and status registers and logging any fault should take priority over handling status register update. Fix by moving the status handling to later in interrupt routine. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
Liam Breck <kernel@networkimprov.net> Acked-by:
Mark Greer <mgreer@animalcreek.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
-
Liam Breck authored
commit 68abfb80 upstream. Caching the fault register after a single I2C read may not keep an accurate value. Fix by doing two reads in irq_handle_thread() and using the cached value elsewhere. If a safety timer fault later clears itself, we apparently don't get an interrupt (INT), however other interrupts would refresh the register cache. From the data sheet: "When a fault occurs, the charger device sends out INT and keeps the fault state in REG09 until the host reads the fault register. Before the host reads REG09 and all the faults are cleared, the charger device would not send any INT upon new faults. In order to read the current fault status, the host has to read REG09 two times consecutively. The 1st reads fault register status from the last read [1] and the 2nd reads the current fault register status." [1] presumably a typo; should be "last fault" Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit 2d9fee6a upstream. We wrongly get uevents for bq24190-charger and bq24190-battery on every register change. Fix by checking the association with charger and battery before emitting uevent(s). Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Thomas Elste authored
commit cd054ee1 upstream. The initial register reset of BQ24190 generates a charger status change whose propagation via power_supply_changed is prevented using a flag. This flag gets never reset so all following events are ignored as well leading for example to userspace not detecting charger connects/disconnects. Therefor change the reset condition of first_time flag, so only the propagation of the first charger status change is prevented. Signed-off-by:
Thomas Elste <thomas.elste@imms.de> Signed-off-by:
-
Liam Breck authored
commit d62acc5e upstream. The device specific data is not fully initialized on request_threaded_irq(). This may cause a crash when the IRQ handler tries to reference them. Fix the issue by installing IRQ handler at the end of the probe. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit e05ad7e0 upstream. pm_resume() does a register_reset() which clears charger host mode. Fix by calling set_mode_host() after the reset. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Liam Breck authored
commit 767eee36 upstream. The interrupt signal is TRIGGER_FALLING. This is is specified in the data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us pulse to host to report charger device status and fault." Also the direction can be seen in the data sheet Figure 37 "BQ24190 with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k pull-up resistor installed for the sample configurations. Fixes: d7bf353f ("bq24190_charger: Add support for TI BQ24190 Battery Charger") Signed-off-by:
-
Omar Sandoval authored
commit 6c0ca7ae upstream. When we resize a struct sbitmap_queue, we update the wakeup batch size, but we don't update the wait count in the struct sbq_wait_states. If we resized down from a size which could use a bigger batch size, these counts could be too large and cause us to miss necessary wakeups. To fix this, update the wait counts when we resize (ensuring some careful memory ordering so that it's safe w.r.t. concurrent clears). This also fixes a theoretical issue where two threads could end up bumping the wait count up by the batch size, which could also potentially lead to hangs. Reported-by:
Martin Raiber <martin@urbackup.org> Fixes: e3a2b3f9 ("blk-mq: allow changing of queue depth through sysfs") Fixes: 2971c35f ("blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt") Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com> [bwh: Backported to 3.16: - Adjust filename - Rename almost everything - Use ACCESS_ONCE() instead of {READ,WRITE}_ONCE()] Signed-off-by:
-
Bart Van Assche authored
commit 9d8f0bcc upstream. Eliminate a backwards goto statement from bt_clear_tag(). Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Brian Norris authored
commit 6183468a upstream. Similar to commit fcd2042e ("mwifiex: printk() overflow with 32-byte SSIDs"), we failed to account for the existence of 32-char SSIDs in our debugfs code. Unlike in that case though, we zeroed out the containing struct first, and I'm pretty sure we're guaranteed to have some padding after the 'ssid.ssid' and 'ssid.ssid_len' fields (the struct is 33 bytes long). So, this is the difference between: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef " ... and the correct output: # cat /sys/kernel/debug/mwifiex/mlan0/info ... essid="0123456789abcdef0123456789abcdef" ... Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [bwh: Backported to 3.16: adjsut filename] Signed-off-by:
-
Michael Petlan authored
commit 5c64f99b upstream. The "--dump-raw-script" is not a valid option, replace it with the valid one, "--dump-raw-trace" Signed-off-by:
Michael Petlan <mpetlan@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 133dc4c3 ("perf: Rename 'perf trace' to 'perf script'") LPU-Reference: 728644547.14560155.1484320012612.JavaMail.zimbra@redhat.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit 6e017006 upstream. gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with a destination argument that an earlier function call may have set to NULL: staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr': staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull] staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr': staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull] I'm fixing this by adding a NULL pointer check and returning failure from the function, which is hopefully already handled properly. This seems to date back to when the drivers were originally added, so backporting the fix to stable seems appropriate. There are other related realtek drivers in the kernel, but none of them contain a function with a similar name or produce this warning. Fixes: 1cc18a22 ("staging: r8188eu: Add files for new driver - part 5") Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Signed-off-by:
-
Johan Hovold authored
commit 2eee0502 upstream. The opticon driver used a control request at open to trigger a CTS status notification to be sent over the bulk-in pipe. When the driver was converted to using the generic read implementation, an inverted test prevented this request from being sent, something which could lead to TIOCMGET reporting an incorrect CTS state. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 7a6ee2b0 ("USB: opticon: switch to generic read implementation") Reviewed-by:
-
Johan Hovold authored
commit 39712e8b upstream. Make sure to detect and return an error on zero-length control-message transfers when reading from the device. This addresses a potential failure to detect an empty transmit buffer during close. Also remove a redundant check for short transfer when sending a command. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 1eac5c24 upstream. Make sure to detect short control-message transfers rather than continue with zero-initialised data when retrieving modem status and during device initialisation. Fixes: 52af9545 ("USB: add USB serial ssu100 driver") Reviewed-by:
-
Johan Hovold authored
commit 5ed8d410 upstream. Make sure to detect short control transfers and return zero on success when retrieving the modem status. This fixes the TIOCMGET implementation which since e1ed212d ("USB: spcp8x5: add proper modem-status support") has returned TIOCM_LE on successful retrieval, and avoids leaking bits from the stack on short transfers. This also fixes the carrier-detect implementation which since the above mentioned commit unconditionally has returned true. Fixes: e1ed212d ("USB: spcp8x5: add proper modem-status support") Reviewed-by:
-
Johan Hovold authored
commit 8c34cb8d upstream. Make sure to detect short control-message transfers when fetching modem and line state in open and when retrieving registers. This specifically makes sure that an errno is returned to user space on errors in TIOCMGET instead of a zero bitmask. Also drop the unused getdevice function which also lacked appropriate error handling. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Reviewed-by:
-
Johan Hovold authored
commit 36356a66 upstream. Make sure to detect short control-message transfers so that errors are logged when reading the modem status at open. Note that while this also avoids initialising the modem status using uninitialised heap data, these bits could not leak to user space as they are currently not used. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 3c0e25d8 upstream. Make sure to detect short control-message transfers and log an error when reading incomplete manufacturer and boot descriptors. Note that the default all-zero descriptors will now be used after a short transfer is detected instead of partially initialised ones. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit e4457d97 upstream. Use a dedicated buffer for the DMA transfer and make sure to detect short transfers to avoid parsing a corrupt descriptor. Fixes: 6e8cf775 ("USB: add EPIC support to the io_edgeport driver") Reviewed-by:
-
Johan Hovold authored
commit e3e574ad upstream. Make sure to detect short responses when reading the latency timer to avoid using stale buffer data. Note that no heap data would currently leak through sysfs as ASYNC_LOW_LATENCY is set by default. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 427c3a95 upstream. Make sure to detect short responses when fetching the modem status in order to avoid parsing uninitialised buffer data and having bits of it leak to user space. Note that we still allow for short 1-byte responses. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit b631433b upstream. Fix open error handling which failed to detect errors when reading the MSR and LSR registers, something which could lead to the shadow registers being initialised from errnos. Note that calling the generic close implementation is sufficient in the error paths as the interrupt urb has not yet been submitted and the register updates have not been made. Fixes: f4c1e8d5 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by:
-
Johan Hovold authored
commit 9fef37d7 upstream. The current implementation failed to detect short transfers, something which could lead to bits of the uninitialised heap transfer buffer leaking to user space. Fixes: 149fc791 ("USB: ark3116: Setup some basic infrastructure for new ark3116 driver.") Fixes: f4c1e8d5 ("USB: ark3116: Make existing functions 16450-aware and add close and release functions.") Reviewed-by:
-
Johan Hovold authored
commit a0467a96 upstream. The modem-status register was read as part of device configuration at port_probe and then again at open (and reset-resume). During open (and reset-resume) the MSR was read before submitting the interrupt URB, something which could lead to an MSR-change going unnoticed when it races with open (reset-resume). Fix this by dropping the redundant reconfiguration of the port at every open, and only read the MSR after the interrupt URB has been submitted. Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Signed-off-by:
-
Chris Wilson authored
commit af2e859e upstream. From conflicting macro parameters, passing the wrong name to __MUTEX_INITIALIZER and a stray '\', #define __WW_MUTEX_INITIALIZER was very unhappy. One unnecessary change was to choose to pass &ww_class instead of implicitly taking the address of the class within the macro. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1b375dc3 ("mutex: Move ww_mutex definitions to ww_mutex.h") Link: http://lkml.kernel.org/r/20161201114711.28697-2-chris@chris-wilson.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Feras Daoud authored
commit 27d41d29 upstream. Since ipoib_cm_tx_start function and ipoib_cm_tx_reap function belong to different work queues, they can run in parallel. In this case if ipoib_cm_tx_reap calls list_del and release the lock, ipoib_cm_tx_start may acquire it and call list_del_init on the already deleted object. Changing list_del to list_del_init in ipoib_cm_tx_reap fixes the problem. Fixes: 839fcaba ("IPoIB: Connected mode experimental support") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Feras Daoud authored
commit c586071d upstream. In order to resolve a situation where a few process delete the same list element in sequence and cause panic, list_del is replaced with list_del_init. In this case if the first process that calls list_del releases the lock before acquiring it again, other processes who can acquire the lock will call list_del_init. Fixes: b63b70d8 ("IPoIB: Use a private hash table for path lookup") Signed-off-by:
-
