1. 30 Mar, 2020 1 commit
    • Emil Velikov's avatar
      drm: rework SET_MASTER and DROP_MASTER perm handling · 45bc3d26
      Emil Velikov authored
      This commit reworks the permission handling of the two ioctls. In
      particular it enforced the CAP_SYS_ADMIN check only, if:
       - we're issuing the ioctl from process other than the one which opened
      the node, and
       - we are, or were master in the past
      
      This ensures that we:
       - do not regress the systemd-logind style of DRM_MASTER arbitrator
       - allow applications which do not use systemd-logind to drop their
      master capabilities (and regain them at later point) ... w/o running as
      root.
      
      See the comment above drm_master_check_perm() for more details.
      
      v1:
       - Tweak wording, fixup all checks, add igt test
      
      v2:
       - Add a few more comments, grammar nitpicks.
      
      Cc: Adam Jackson <ajax@redhat.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Pekka Paalanen <ppaalanen@gmail.com>
      Testcase: igt/core_setmaster/master-drop-set-user
      Signed-off-by: default avatarEmil Velikov <emil.velikov@collabora.com>
      Reviewed-by: default avatarAdam Jackson <ajax@redhat.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200319172930.230583-1-emil.l.velikov@gmail.com
      45bc3d26
  2. 28 Mar, 2020 12 commits
  3. 27 Mar, 2020 5 commits
  4. 26 Mar, 2020 22 commits
    • Daniel Vetter's avatar
      drm: Add docs for managed resources · 9e1ed9fb
      Daniel Vetter authored
      All collected together to provide a consistent story in one patch,
      instead of the somewhat bumpy refactor-evolution leading to this.
      
      Also some thoughts on what the next steps could be:
      
      - Create a macro called devm_drm_dev_alloc() which essentially wraps
        the kzalloc(); devm_drm_dev_init(); drmm_add_final_kfree() combo.
        Needs to be a macro since we'll have to do some typeof trickery and
        casting to make this fully generic for all drivers that embed struct
        drm_device into their own thing.
      
      - A lot of the simple drivers now have essentially just
        drm_dev_unplug(); drm_atomic_helper_shutdown(); as their
        $bus_driver->remove hook. We could create a devm_mode_config_reset
        which sets drm_atomic_helper_shutdown as it's cleanup action, and a
        devm_drm_dev_register with drm_dev_unplug as it's cleanup action,
        and simple drivers wouldn't have a need for a ->remove function at
        all, and we could delete them.
      
      - For more complicated drivers we need drmm_ versions of a _lot_ more
        things. All the userspace visible objects (crtc, plane, encoder,
        crtc), anything else hanging of those (maybe a drmm_get_edid, at
        least for panels and other built-in stuff).
      
      Also some more thoughts on why we're not reusing devm_ with maybe a
      fake struct device embedded into the drm_device (we can't use the
      kdev, since that's in each drm_minor).
      
      - Code review gets extremely tricky, since every time you see a devm_
        you need to carefully check whether the fake device (with the
        drm_device lifetim) or the real device (with the lifetim of the
        underlying physical device and driver binding) are used. That's not
        going to help at all, and we have enormous amounts of drivers who
        use devm_ where they really shouldn't. Having different types makes
        sure the compiler type checks this for us and ensures correctness.
      
      - The set of functions are very much non-overlapping. E.g.
        devm_ioremap makes total sense, drmm_ioremap has the wrong lifetime,
        since hw resources need to be cleaned out at driver unbind and wont
        outlive that like a drm_device. Similar, but other way round for
        drmm_connector_init (which is the only correct version, devm_ for
        drm_connector is just buggy). Simply not having the wrong version
        again prevents bugs.
      
      Finally I guess this opens a huge todo for all the drivers. I'm
      semi-tempted to do a tree-wide s/devm_kzalloc/drmm_kzalloc/ since most
      likely that'll fix an enormous amount of bugs and most likely not
      cause any issues at all (aside from maybe holding onto memory slightly
      too long).
      
      v2:
      - Doc improvements from Laurent.
      - Also add kerneldoc for the new drmm_add_action_or_reset.
      
      v3:
      - Remove kerneldoc for drmm_remove_action.
      Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: linux-doc@vger.kernel.org
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: "Rafael J. Wysocki" <rafael@kernel.org>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      
      fixup docs
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-52-daniel.vetter@ffwll.ch
      9e1ed9fb
    • Daniel Vetter's avatar
      drm/udl: drop drm_driver.release hook · b1a981bd
      Daniel Vetter authored
      There's only two functions called from that:
      drm_kms_helper_poll_fini() and udl_free_urb_list(). Both of these are
      also called from the ubs_driver->disconnect hook, so entirely
      pointless to do the same again in the ->release hook.
      
      Furthermore by the time we clean up the drm_driver we really shouldn't
      be touching hardware anymore, so stopping the poll worker and freeing
      the urb allocations in ->disconnect is the right thing to do.
      
      Now disconnect still cleans things up before unregistering the driver,
      but that's a different issue.
      
      v2: Use _fini, not _disable in unplug, motivated by discussions with
      Thomas. _disable/_enable are for suspend/resume.
      Acked-by: default avatarThomas Zimmermann <tzimmermann@suse.de>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Dave Airlie <airlied@redhat.com>
      Cc: Sean Paul <sean@poorly.run>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: Emil Velikov <emil.l.velikov@gmail.com>
      Cc: Gerd Hoffmann <kraxel@redhat.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Alex Deucher <alexander.deucher@amd.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-51-daniel.vetter@ffwll.ch
      b1a981bd
    • Daniel Vetter's avatar
      drm/udl: Drop explicit drm_mode_config_cleanup call · fe5b7c86
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This allows us to delete a bit of onion unwinding in
      udl_modeset_init().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      Acked-by: default avatarThomas Zimmermann <tzimmermann@suse.de>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Dave Airlie <airlied@redhat.com>
      Cc: Sean Paul <sean@poorly.run>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: Emil Velikov <emil.l.velikov@gmail.com>
      Cc: Gerd Hoffmann <kraxel@redhat.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-50-daniel.vetter@ffwll.ch
      fe5b7c86
    • Daniel Vetter's avatar
      drm/mipi-dbi: Drop explicit drm_mode_config_cleanup call · 3421a6c4
      Daniel Vetter authored
      Allows us to drop the drm_driver.release callback from all
      drivers, and remove the mipi_dbi_release() function.
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2)
      Tested-by: default avatarNoralf Trønnes <noralf@tronnes.org>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Cc: Maxime Ripard <mripard@kernel.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: David Airlie <airlied@linux.ie>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: Eric Anholt <eric@anholt.net>
      Cc: David Lechner <david@lechnology.com>
      Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-49-daniel.vetter@ffwll.ch
      3421a6c4
    • Daniel Vetter's avatar
      drm/mipi-dbi: Move drm_mode_config_init into mipi library · 53bdebf7
      Daniel Vetter authored
      7/7 drivers agree that's the right choice, let's do this.
      
      This avoids duplicating the same old error checking code over all 7
      drivers, which is the motivation here.
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Reviewed-by: default avatarNoralf Trønnes <noralf@tronnes.org>
      Tested-by: default avatarNoralf Trønnes <noralf@tronnes.org>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Cc: Maxime Ripard <mripard@kernel.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: David Airlie <airlied@linux.ie>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: Eric Anholt <eric@anholt.net>
      Cc: David Lechner <david@lechnology.com>
      Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-48-daniel.vetter@ffwll.ch
      53bdebf7
    • Daniel Vetter's avatar
      drm/repaper: Drop explicit drm_mode_config_cleanup call · be9f2b03
      Daniel Vetter authored
      Allows us to drop the drm_driver.release callback.
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      I also noticed that I've failed to add the error checking,
      __must_check caught that.
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v2)
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-47-daniel.vetter@ffwll.ch
      be9f2b03
    • Daniel Vetter's avatar
      drm/gm12u320: Simplify upload work · 8f2cb937
      Daniel Vetter authored
      Instead of having a work item that never stops (which really should be
      a kthread), with a dedicated workqueue to not upset anyone else, use a
      delayed work. A bunch of changes:
      
      - We can throw out all the custom wakeup and requeue logic and state
        tracking. If we schedule the work with a 0 delay it'll get
        scheduled immediately.
      
      - Persistent state (frame & draw_status_timeout) need to be moved out
        of the work.
      
      - diff is bigger than the changes, biggest chunk is reindenting the
        work fn because it lost its while loop.
      
      Lots of code deleting as consequence all over. Specifically we can
      delete the drm_driver.release code now!
      
      v2: Review from Hans:
      - Use mod_delayed_work in the plane update path to make sure we do
        actually schedule immediately). In the worker we still want
        queue_delayed_work, which won't modify the timeout when the work is
        already scheduled. Which is exactly what we want if the work races
        with a plane update.
      - Switch to system_long_wq, Hans says on usb2 a plane upload can take
        80 ms.
      Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Hans de Goede <hdegoede@redhat.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-46-daniel.vetter@ffwll.ch
      8f2cb937
    • Daniel Vetter's avatar
      drm/gm12u320: Use helpers for shutdown/suspend/resume · 7ef64ed1
      Daniel Vetter authored
      Also there's a race in the disconnect implemenation. First shut
      down, then unplug, leaves a window where userspace could sneak
      in and restart the entire machinery.
      
      With this we can also delete the very un-atomic global pipe_enabled
      tracking.
      Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Hans de Goede <hdegoede@redhat.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-45-daniel.vetter@ffwll.ch
      7ef64ed1
    • Daniel Vetter's avatar
      drm/gm12u320: Use devm_drm_dev_init · 993f5b19
      Daniel Vetter authored
      Only drops the drm_dev_put, but hey a few lines!
      Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Hans de Goede <hdegoede@redhat.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-44-daniel.vetter@ffwll.ch
      993f5b19
    • Daniel Vetter's avatar
      drm/gm12u320: More drmm_ · 08373edc
      Daniel Vetter authored
      The drm_mode_config_cleanup call we can drop, and all the allocations
      we can switch over to drmm_kzalloc. Unfortunately the work queue is
      still present, so can't get rid of the drm_driver->release function
      outright.
      
      v2: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Reviewed-by: Hans de Goede <hdegoede@redhat.com> (v1)
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Hans de Goede <hdegoede@redhat.com>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-43-daniel.vetter@ffwll.ch
      08373edc
    • Daniel Vetter's avatar
      drm/tidss: Drop explicit drm_mode_config_cleanup call · c792098b
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: Another driver with a bit much devm_kzalloc, which should
      probably use drmm_kzalloc instead ...
      
      I'm pretty sure this one blows up already under KASAN because it's
      using devm_drm_dev_init, and later on devm_kzalloc. Hence the memory
      will get freed before the final drm_dev_put (all from the devres
      code), but the cleanup in that final drm_dev_put will access the just
      freed memory.
      
      Unfortunately fixing this properly needs slightly more work, namely
      drmm_ versions for all the drm objects (planes, crtc, ...), so that
      the cleanup actually happens before even drmm_kzalloc would release
      the underlying memory. Not quite there yet.
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Acked-by: default avatarJyri Sarha <jsarha@ti.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Jyri Sarha <jsarha@ti.com>
      Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-42-daniel.vetter@ffwll.ch
      c792098b
    • Daniel Vetter's avatar
      drm/mtk: Drop explicit drm_mode_config_cleanup call · 18c62222
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: Another driver with a bit much devm_kzalloc, which should
      probably use drmm_kzalloc instead ...
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      Acked-by: default avatarChun-Kuang Hu <chunkuang.hu@kernel.org>
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-41-daniel.vetter@ffwll.ch
      18c62222
    • Daniel Vetter's avatar
      drm/shmob: Drop explicit drm_mode_config_cleanup call · e28c853e
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: Another driver with a bit much devm_kzalloc, which should
      probably use drmm_kzalloc instead ...
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2)
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
      Cc: linux-renesas-soc@vger.kernel.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-40-daniel.vetter@ffwll.ch
      e28c853e
    • Daniel Vetter's avatar
      drm/stm: Drop explicit drm_mode_config_cleanup call · 967be0ff
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: Another driver with a bit much devm_kzalloc, which should
      probably use drmm_kzalloc instead ...
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Acked-by: default avatarPhilippe Cornu <philippe.cornu@st.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Yannick Fertre <yannick.fertre@st.com>
      Cc: Philippe Cornu <philippe.cornu@st.com>
      Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
      Cc: Vincent Abriou <vincent.abriou@st.com>
      Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
      Cc: Alexandre Torgue <alexandre.torgue@st.com>
      Cc: linux-stm32@st-md-mailman.stormreply.com
      Cc: linux-arm-kernel@lists.infradead.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-39-daniel.vetter@ffwll.ch
      967be0ff
    • Daniel Vetter's avatar
      drm/rockchip: Drop explicit drm_mode_config_cleanup call · 56e35f85
      Daniel Vetter authored
      It's (almost, there's some iommu stuff without significance) right
      above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: Another driver with a bit much devm_kzalloc, which should
      probably use drmm_kzalloc instead ...
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Jump out at the right label (Francesco)
      
      v4: Try again, kbuild caught that I didn't build test this properly
      ...
      
      v5: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: Francesco Lavra <francescolavra.fl@gmail.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Sandy Huang <hjc@rock-chips.com>
      Cc: "Heiko Stübner" <heiko@sntech.de>
      Cc: linux-arm-kernel@lists.infradead.org
      Cc: linux-rockchip@lists.infradead.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-38-daniel.vetter@ffwll.ch
      56e35f85
    • Daniel Vetter's avatar
      drm/rcar-du: Drop explicit drm_mode_config_cleanup call · b570e88d
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: Another driver with a bit much devm_kzalloc, which should
      probably use drmm_kzalloc instead ...
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v2)
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
      Cc: linux-renesas-soc@vger.kernel.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-37-daniel.vetter@ffwll.ch
      b570e88d
    • Daniel Vetter's avatar
      drm/pl111: Drop explicit drm_mode_config_cleanup call · 5e3e55b6
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: This driver gets its devm_ stuff all wrong wrt drm_device and
      anything hanging off that. Not the only one unfortunately.
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Eric Anholt <eric@anholt.net>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-36-daniel.vetter@ffwll.ch
      5e3e55b6
    • Daniel Vetter's avatar
      drm/meson: Drop explicit drm_mode_config_cleanup call · bd9ff7b5
      Daniel Vetter authored
      It's right above the drm_dev_put().
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      Aside: This driver gets its devm_ stuff all wrong wrt drm_device and
      anything hanging off that. Not the only one unfortunately.
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v2)
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Neil Armstrong <narmstrong@baylibre.com>
      Cc: Kevin Hilman <khilman@baylibre.com>
      Cc: linux-amlogic@lists.infradead.org
      Cc: linux-arm-kernel@lists.infradead.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-35-daniel.vetter@ffwll.ch
      bd9ff7b5
    • Daniel Vetter's avatar
      drm/mcde: More devm_drm_dev_init · 90c2e13b
      Daniel Vetter authored
      Auto-unwind ftw, now possible with the fixed drm_device related
      management.
      
      Aside, clk/regulator seem to be missing devm versions for a bunch of
      functions, preventing a pile of these simpler drivers from outright
      losing their ->remove hook.
      Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-34-daniel.vetter@ffwll.ch
      90c2e13b
    • Daniel Vetter's avatar
      drm/mcde: Drop explicit drm_mode_config_cleanup call · 4b055ab1
      Daniel Vetter authored
      Allows us to drop the drm_driver.release callback.
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v2)
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-33-daniel.vetter@ffwll.ch
      4b055ab1
    • Daniel Vetter's avatar
      drm/ingenic: Drop explicit drm_mode_config_cleanup call · fe1cc102
      Daniel Vetter authored
      Allows us to drop the drm_driver.release callback.
      
      This is made possible by a preceeding patch which added a drmm_
      cleanup action to drm_mode_config_init(), hence all we need to do to
      ensure that drm_mode_config_cleanup() is run on final drm_device
      cleanup is check the new error code for _init().
      
      v2: Explain why this cleanup is possible (Laurent).
      
      v3: Use drmm_mode_config_init() for more clarity (Sam, Thomas)
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Reviewed-by: Paul Cercueil <paul@crapouillou.net> (v2)
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Paul Cercueil <paul@crapouillou.net>
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-32-daniel.vetter@ffwll.ch
      fe1cc102
    • Daniel Vetter's avatar
      drm/cirrus: Fully embrace devm_ · 70c2fe18
      Daniel Vetter authored
      With the drm_device lifetime fun cleaned up there's nothing in the way
      anymore to use devm_ for everything hw releated. Do it, and in the
      process, throw out the entire onion unwinding.
      Acked-by: default avatarGerd Hoffmann <kraxel@redhat.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Dave Airlie <airlied@redhat.com>
      Cc: Gerd Hoffmann <kraxel@redhat.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: "Noralf Trønnes" <noralf@tronnes.org>
      Cc: Emil Velikov <emil.velikov@collabora.com>
      Cc: Thomas Zimmermann <tzimmermann@suse.de>
      Cc: virtualization@lists.linux-foundation.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-31-daniel.vetter@ffwll.ch
      70c2fe18