- 18 Sep, 2017 6 commits
-
-
Michał Winiarski authored
Originally removed in: c1adab97 ("drm/i915/guc: Remove failed doorbell stat from debugfs") f1448a62 ("drm/i915/guc: Remove last submission result from debugfs") Were accidentally restored in: 925344cc ("BackMerge tag 'v4.12-rc5' into drm-next") We can also remove unused variable and replace it with a WARN. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-1-michal.winiarski@intel.comSigned-off-by:
-
Chris Wilson authored
Given the mechanism to unwind and replay requests (designed to support preemption), we have an alternative to the current method of resubmitting the ELSP upon reset. Resubmitting ELSP turns out to be more complicated than expected, due to having to handle lost context-switch interrupts and so guessing what ELSP we need to resubmit later. Instead, by unwinding the requests and clearing the ELSP tracking entirely, we can then just dequeue the first pair of ready requests after resetting, using the normal submission procedure. Currently, the unwound requests have maximum priority and so are guaranteed to be resubmitted upon resume. If we are lucky, we may be able to coalesce a new request on top! Suggested-by:
-
Chris Wilson authored
In the next patch we will want to reinsert a request not at the end of the priority queue, but at the front. Here we split insert_request() into two, the first function retrieves the priority list (for reuse for unsubmit later) and a wrapper function to insert at the end of that list and to schedule the tasklet if we were first. Signed-off-by:
-
Chris Wilson authored
Move insert_request() earlier to avoid a forward declaration in a later patch. Signed-off-by:
-
Chris Wilson authored
During a reset, we may skip over completed requests and lost context-switch interrupts. Following the reset, we may then may end up with no active requests in the ELSP (and so do not resubmit to restart the engine), but have a queue of requests ready for execution. This is unlikely, it requires the last request to complete after the hang is detected, but not impossible. The outcome of this is that the engine stalls, possibly leading to full ring and indefinite wait under struct_mutex, eventually leading to a full driver hang. Alternatively, we can solve this by unsubmitting the incomplete requests and just kickstarting the tasklet. Michał has patches for that, which I initially disliked due to the extra complexity, but the complexity of this "simple" restart is growing... Signed-off-by:
-
Chris Wilson authored
When wedging the hw, we want to mark all in-flight requests as -EIO. This is made slightly more complex by execlists who store the ready but not yet submitted-to-hw requests on a private queue (an rbtree priolist). Call into execlists to cancel not only the ELSP tracking for the submitted requests, but also the queue of unsubmitted requests. v2: Move the majority of engine_set_wedged to the backends (both legacy ringbuffer and execlists handling their own lists). Reported-by:
-
- 15 Sep, 2017 9 commits
-
-
Ville Syrjälä authored
Now that we're not using MSI anymore on gen4 we can start using GMBUS and AUX interrupts again. These were disabled on account of them causing the hardware to somehow generate legacy interrupts even when MSI was enabled. See commit c12aba5a ("drm/i915: stop using GMBUS IRQs on Gen4 chips") and commit 4e6b788c ("drm/i915: Disable dp aux irq on g4x") for more details. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-17-ville.syrjala@linux.intel.comAcked-by:
-
Ville Syrjälä authored
All the irq_preinstall and irq_uninstall hooks are now identical. Let's just rename them all the irq_reset and remove the pointless duplicates. Reviewed-by:
-
Ville Syrjälä authored
Currently we're unmasking some random looking bits in HWSTAM on gen3/4/5. The two bits we apparently unmask are 0 and 12, and also bits 16-31 on gen4/5. What those bits do depends on the gen as follows: bit 0: Breakpoint (gen2), ASLE (gen3), reserved (gen4), render user interrupt (gen5) bit 12: Sync flush statusa (gen2-4), reserved (gen5) bit 16-31: The ones that can unmasked seem to be mostly some display stuff on gen4. Bit 18 is the PIPE_CONTROL notify, which might be the only intresting one. On gen5 all the bits are reserved. So I don't know whether we actually depend on that status page write somehow. Extra seqno coherency by accident perhaps? Except we don't even unmask the user interrupt bit in HWSTAM except on gen5, and sync flush isn't something we use normally, so seems unlikely. So let's just assume we don't need any of this and mask everything in HWSTAM. From gen6 onwards there's a separate HWSTAM for each engine, and so we deal with them during the engine setup. Signed-off-by: -
Ville Syrjälä authored
The execlist code already masks everything in the ring HWSTAM, but the ringbuffer code doesn't. Let's go ahead and do that. Pre-gen6 platforms setup HWSTAM during irq setup already since there's just the one register, and it also contains bits for non-ring interrupts. Signed-off-by:
-
Michal Wajdeczko authored
We're always specifying description of each module param in separate macro. Let's combine description into our main macro. Started with Coccinelle, followed by minor cleanup. @match1@ declarer name MODULE_PARM_DESC; identifier n; constant c; @@ ( - MODULE_PARM_DESC(n, c); ) @fix1 depends on match1@ declarer name i915_param_named; declarer name i915_param_named_unsafe; identifier match1.n; constant match1.c; @@ ( i915_param_named(n, ... + , c ); | i915_param_named_unsafe(n, ... + , c ); ) Suggested-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Michal Wajdeczko authored
As we now use same name for public module param and its local representation we can simplify param definition macro. Changes done with Coccinelle: @@ declarer name module_param_named; declarer name module_param_named_unsafe; declarer name i915_param_named; declarer name i915_param_named_unsafe; identifier n; @@ ( -module_param_named(n, i915.n, +i915_module_param_named(n, ...); | -module_param_named_unsafe(n, i915.n, +i915_module_param_named_unsafe(n, ...); ) Suggested-by:
-
Michal Wajdeczko authored
This modparam affects not only LVDS but also eDP panels. Additionally with this rename we will keep modparam and i915_params field name in sync. This patch will unblock us with further improvements around params defs. Suggested-by:
Ville Syrjala <ville.syrjala@intel.com> Signed-off-by:
-
Chris Wilson authored
To silence the critcs: [56532.161115] workqueue: PF_MEMALLOC task 36(khugepaged) is flushing !WQ_MEM_RECLAIM i915-userptr-release: (null) [56532.161138] ------------[ cut here ]------------ [56532.161144] WARNING: CPU: 1 PID: 36 at kernel/workqueue.c:2418 check_flush_dependency+0xe8/0xf0 [56532.161145] Modules linked in: wmi_bmof [56532.161148] CPU: 1 PID: 36 Comm: khugepaged Not tainted 4.13.0-krejzi #1 [56532.161149] Hardware name: HP HP ProBook 470 G3/8102, BIOS N78 Ver. 01.17 06/08/2017 [56532.161150] task: ffff8802371ee200 task.stack: ffffc90000174000 [56532.161152] RIP: 0010:check_flush_dependency+0xe8/0xf0 [56532.161152] RSP: 0018:ffffc900001777b8 EFLAGS: 00010286 [56532.161153] RAX: 000000000000006c RBX: ffff88022fc5a000 RCX: 0000000000000001 [56532.161154] RDX: 0000000000000000 RSI: 0000000000000086 RDI: 00000000ffffffff [56532.161155] RBP: 0000000000000000 R08: 14f038bb55f6dae0 R09: 0000000000000516 [56532.161155] R10: ffffc900001778a0 R11: 000000006c756e28 R12: ffff8802371ee200 [56532.161156] R13: 0000000000000000 R14: 000000000000000b R15: ffffc90000177810 [56532.161157] FS: 0000000000000000(0000) GS:ffff880240480000(0000) knlGS:0000000000000000 [56532.161158] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56532.161158] CR2: 0000000004795ff8 CR3: 000000000220a000 CR4: 00000000003406e0 [56532.161159] Call Trace: [56532.161161] ? flush_workqueue+0x136/0x3e0 [56532.161178] ? _raw_spin_unlock_irqrestore+0xf/0x30 [56532.161179] ? try_to_wake_up+0x1ce/0x3b0 [56532.161183] ? i915_gem_userptr_mn_invalidate_range_start+0x13f/0x150 [56532.161184] ? _raw_spin_unlock+0xd/0x20 [56532.161186] ? i915_gem_userptr_mn_invalidate_range_start+0x13f/0x150 [56532.161189] ? __mmu_notifier_invalidate_range_start+0x4a/0x70 [56532.161191] ? try_to_unmap_one+0x5e5/0x660 [56532.161193] ? rmap_walk_file+0xe4/0x240 [56532.161195] ? __ClearPageMovable+0x10/0x10 [56532.161196] ? try_to_unmap+0x8c/0xe0 [56532.161197] ? page_remove_rmap+0x280/0x280 [56532.161199] ? page_not_mapped+0x10/0x10 [56532.161200] ? page_get_anon_vma+0x90/0x90 [56532.161202] ? migrate_pages+0x6a5/0x940 [56532.161203] ? isolate_freepages_block+0x330/0x330 [56532.161205] ? compact_zone+0x593/0x6a0 [56532.161206] ? enqueue_task_fair+0xc3/0x1180 [56532.161208] ? compact_zone_order+0x9b/0xc0 [56532.161210] ? get_page_from_freelist+0x24a/0x900 [56532.161212] ? try_to_compact_pages+0xc8/0x240 [56532.161213] ? try_to_compact_pages+0xc8/0x240 [56532.161215] ? __alloc_pages_direct_compact+0x45/0xe0 [56532.161216] ? __alloc_pages_slowpath+0x845/0xb90 [56532.161218] ? __alloc_pages_nodemask+0x176/0x1f0 [56532.161220] ? wait_woken+0x80/0x80 [56532.161222] ? khugepaged+0x29e/0x17d0 [56532.161223] ? wait_woken+0x80/0x80 [56532.161225] ? collapse_shmem.isra.39+0xa60/0xa60 [56532.161226] ? kthread+0x10d/0x130 [56532.161227] ? kthread_create_on_node+0x60/0x60 [56532.161228] ? ret_from_fork+0x22/0x30 [56532.161229] Code: 00 8b b0 10 05 00 00 48 8d 8b b0 00 00 00 48 8d 90 b8 06 00 00 49 89 e8 48 c7 c7 38 55 09 82 c6 05 f9 c6 1d 01 01 e8 0e a1 03 00 <0f> ff e9 6b ff ff ff 90 48 8b 37 40 f6 c6 04 75 1b 48 c1 ee 05 [56532.161251] ---[ end trace 2ce2b4f5f69b803b ]--- Signed-off-by:
-
Chris Wilson authored
Commit 1bf6ad62 ("drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos") removed the use of in_vbl, but did not remove the local variable. Do so now. Fixes: 1bf6ad62 ("drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos") Signed-off-by:
-
- 14 Sep, 2017 18 commits
-
-
Manasi Navare authored
No functional changes. Only change the macro from "DPLL_CFGCR0_DC0_FRAC_SHIFT to DPLL_CFGCR0_DCO_FRACTION_SHIFT to be consistent with DPLL_CFGCR0_DCO_FRACTION_MASK and DPLL_CFGCR0_DCO_FRACTION Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Bspec claims that HWSTAM is only 16 bits on gen3, but the other interrupts registers are 32 bits and there are 18 valid interrupt bits. Hence a 16 bit HWSTAM wouldn't be able to contain all the bits, so it seems the spec is incorrect about the size of the register. And indeed I can clear bits 16 and 17 just fine with a 32 bit write. So let's adjust the code to treat the register as 32 bits. Acked-by:
-
Ville Syrjälä authored
Eliminate the loops from the gen2-3 irq handlers. Since we don't use MSI anymore on these platforms, and thus the CPU interrupt will be level triggered, we shouldn't need to play any tricks with IER to induce edges from IIR. IIR itself still detects only edges from PIPESTAT & co. on gen4 but since IIR is double buffered and we only clear one bit per irq handler invocation we can use the normal "clear PIPESTAT & co. -> clear IIR" approach to ack the interrupts. On gen2 everything is level triggered, and gen3 presumably follows either the gen2 or gen4 approach since nothing else would really make sense. v2: Drop the IER tricks since we no longer use MSI Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
Extract the gen2-4 PIPESTAT irq handling into separate functions just like we already do on VLV/CHV. We can share valleyview_pipestat_irq_ack() on all gmch platforms to actually read and clear the PIPESTAT status bits, so let's rename it to i9xx_pipestat_irq_ack(). Reviewed-by:
-
Ville Syrjälä authored
There should be no way to land in irq_uninstall without a valid dev_priv. Let's kill off the remaining checks, which are probably some kind of UMS leftovers. Not all the irq_uninstall hooks even had them anymore. Reviewed-by:
-
Ville Syrjälä authored
Do the irq_mask/enable_mask setup in the same way on gen3/4, and also reorder the steps to make the code more uniform. Reviewed-by:
-
Ville Syrjälä authored
We've already cleared PORT_HOTPLUG_EN in the .irq_preinstall hook so doing it again in the .irq_postinstall is pointless. Reviewed-by:
-
Ville Syrjälä authored
Unify the appaerance of the gen2-4 irq postinstall hooks a little bit by doing the EMR setup first on all the platforms. Reviewed-by:
-
Ville Syrjälä authored
Unify the appearance of the gen2 irq code with the gen3+ code by introducing the GEN2_IRQ_RESET/INIT macros. Reviewed-by:
-
Ville Syrjälä authored
Replace the manual IMR+IER+IIR write sequences with the appropriate GEN3_IRQ_RESET/INIT macro invocations in gen3/4. Signed-off-by:
-
Ville Syrjälä authored
The GEN5_IRQ_RESET/INIT macros are perfectly suitable even for gen3/4 hardware as those have 32 bit interrupt registers. Let's rename the macros to reflect that fact. Gen2 on the other hand has 16 bit interrupt registers so these macros aren't really appropriate there. v2: Fix patch subject (Maarten) Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
We have a lot of different ways of clearing the PIPESTAT registers. Let's unify it all into one function. There's no magic in PIPESTAT that would require any of the double clearing and whatnot that some of the code tries to do. All we can really do is clear the status bits and disable the enable bits. There is no way to mask anything so as soon as another event happens the status bit will become set again, and trying to clear them twice or something can't protect against that. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
commit fd3a4024 ("drm/i915: Rip out legacy page_flip completion/irq handling") removed the code to hande the flip done/pending interrupts, but it failed to actually disable/mask those interrupts. Let's do that now. Also remove a stale comment that was left behind. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Zhi Wang authored
Remove the "INDEX" suffix from PPAT marcos as they are bits actually, not indexes. Suggested-by:
Zhi Wang <zhi.a.wang@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505392783-4084-2-git-send-email-zhi.a.wang@intel.com
-
Zhi Wang authored
The private PAT management is to support PPAT entry manipulation. Two APIs are introduced for dynamically managing PPAT entries: intel_ppat_get and intel_ppat_put. intel_ppat_get will search for an existing PPAT entry which perfectly matches the required PPAT value. If not, it will try to allocate a new entry if there is any available PPAT indexs, or return a partially matched PPAT entry if there is no available PPAT indexes. intel_ppat_put will put back the PPAT entry which comes from intel_ppat_get. If it's dynamically allocated, the reference count will be decreased. If the reference count turns into zero, the PPAT index is freed again. Besides, another two callbacks are introduced to support the private PAT management framework. One is ppat->update_hw(), which writes the PPAT configurations in ppat->entries into HW. Another one is ppat->match, which will return a score to show how two PPAT values match with each other. v17: - Refine the comparision of score of BDW. (Joonas) v16: - Fix a bug in PPAT match function of BDW. (Joonas) v15: - Refine some code flow. (Joonas) v12: - Fix a problem "not returning the entry of best score". (Zhenyu) v7: - Keep all the register writes unchanged in this patch. (Joonas) v6: - Address all comments from Chris: http://www.spinics.net/lists/intel-gfx/msg136850.html - Address all comments from Joonas: http://www.spinics.net/lists/intel-gfx/msg136845.html v5: - Add check and warnnings for those platforms which don't have PPAT. v3: - Introduce dirty bitmap for PPAT registers. (Chris) - Change the name of the pointer "dev_priv" to "i915". (Chris) - intel_ppat_{get, put} returns/takes a const intel_ppat_entry *. (Chris) v2: - API re-design. (Chris) Signed-off-by:
-
Ville Syrjälä authored
Use the LLC/eLLC hotspot avoidance mode for CCS on LLC machines. This is reported to give better performance. Testing has indicated that we don't need to enforce any massive 2 or 4 MiB alignment for all compressed resources even though there are still plenty of stale comments in the spec suggesting that we do. We do need to make sure every hardware unit that deals with the compressed data uses the same hash mode. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net>
-
Joonas Lahtinen authored
Convert to use the freshly available made INTEL_GEN_MASK for easier grepping and improve function readability and clarify the UABI documentation. No functional changes. v2: - Lift GEM_BUG_ONs and use is_power_of_2 (Chris) - Retain -EINVAL on bad flags behavior (Chris) v3: - Extract flags with 'entry->size - 1' (Chris) v4: - Add GEM_BUG_ON on for flags vs entry offset (Chris) v5: - Use 'u16' to match 'dev_priv' (Ville) v6: - Fix checkpatch.pl errors Signed-off-by:
-
Joonas Lahtinen authored
Split INTEL_GEN_MASK out of IS_GEN macro, and make it usable within static declarations (unlike compound statements). v2: - s/combound/compound/ (Tvrtko) - Fix whitespace (yes, we need automatic checkpatch.pl) Signed-off-by:
-
- 13 Sep, 2017 7 commits
-
-
Rodrigo Vivi authored
DK had pointed out a comment there was hard to understand, so I tried to read back again and I couldn't understand that as well. So let me re-phrase that in a way that anyone can understand later, even myself. Also fixed the comment block style. v2: Accept DK's suggestion on PSR_state 2 and PSR_state 3 named as spec. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170912183059.5086-1-rodrigo.vivi@intel.com
-
Chris Wilson authored
The engine also provides a mirror of the CSB write pointer in the HWSP, but not of our read pointer. To take advantage of this we need to remember where we read up to on the last interrupt and continue off from there. This poses a problem following a reset, as we don't know where the hw will start writing from, and due to the use of power contexts we cannot perform that query during the reset itself. So we continue the current modus operandi of delaying the first read of the context-status read/write pointers until after the first interrupt. With this we should now have eliminated all uncached mmio reads in handling the context-status interrupt, though we still have the uncached mmio writes for submitting new work, and many uncached mmio reads in the global interrupt handler itself. Still a step in the right direction towards reducing our resubmit latency, although it appears lost in the noise! v2: Cannonlake moved the CSB write index v3: Include the sw/hwsp state in debugfs/i915_engine_info v4: Also revert to using CSB mmio for GVT-g v5: Prevent the compiler reloading tail (Mika) Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-6-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
The engine provides a mirror of the CSB in the HWSP. If we use the cacheable reads from the HWSP, we can shave off a few mmio reads per context-switch interrupt (which are quite frequent!). Just removing a couple of mmio is not enough to actually reduce any latency, but a small reduction in overall cpu usage. Much appreciation for Ben dropping the bombshell that the CSB was in the HWSP and for Michel in digging out the details. v2: Don't be lazy, add the defines for the indices. v3: Include the HWSP in debugfs/i915_engine_info v4: Check for GVT-g, it currently depends on intercepting CSB mmio v5: Fixup GVT-g mmio path v6: Disable HWSP if VT-d is active as the iommu adds unpredictable memory latency. (Mika) v7: Also markup the CSB read with READ_ONCE() as it may still be an mmio read and we want to stop the compiler from issuing a later (v.slow) reload. Suggested-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
-
Chris Wilson authored
At the time of commit 1f767e02 ("drm/i915: HWS must be in the mappable region for g33"), drm_mm insertion would often default to placing a new object high in the zone forcing us to specify that certain HWSP must be bound within the low mappable region. Since then, drm_mm has gained more finesse over its placement and exposes that to the caller, commit 4e64e553 ("drm: Improve drm_mm search (and fix topdown allocation) with rbtrees"). As such where possible we want the HWSP to be outside of the mappable aperture and so need to specify that can be pinned high. Signed-off-by:
-
Daniele Ceraolo Spurio authored
On gen8+ we're currently using the PPHWSP of the kernel ctx as the global HWSP. However, when the kernel ctx gets submitted (e.g. from __intel_autoenable_gt_powersave) the HW will use that page as both HWSP and PPHWSP. This causes a conflict in the register arena of the HWSP, i.e. dword indices below 0x30. We don't current utilize this arena, but in the following patches we will take advantage of the cached register state for handling execlist's context status interrupt. To avoid the conflict, instead of re-using the PPHWSP of the kernel ctx we can allocate a separate page for the HWSP like what happens for pre-execlists platform. v2: Add a use-case for the register arena of the HWSP. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499357440-34688-1-git-send-email-daniele.ceraolospurio@intel.comSigned-off-by:
-
Michel Thierry authored
Using the HWSP ggtt_offset to get the lrca offset is only correct if the HWSP happens to be before it (when we reuse the PPHWSP of the kernel context as the engine HWSP). Instead of making this assumption, get the lrca offset from the kernel_context engine state. And while looking at this part of the GuC interaction, it was also noticed that the firmware expects the size of only the engine context (context minus the execlist part, i.e. don't include the first 80 dwords), so pass the right size. v2: Use the new macros to prevent abusive overuse of the old ones (Chris). Reported-by:
-
Michel Thierry authored
Not only the context image consist of two parts (the PPHWSP, and the logical context state), but we also allocate a header at the start of for sharing data with GuC. Thus every lrc looks like this: | [guc] | [hwsp] [logical state] | |<- our header ->|<- context image ->| So far, we have oversimplified whenever we use each of these parts of the context, just because the GuC header happens to be in page 0, and the (PP)HWSP is in page 1. But this had led to using the same define for more than one meaning (as a page index in the lrc and as 1 page). This patch adds defines for the GuC shared page, the PPHWSP page and the start of the logical state. It also updated the places where the old define was being used. Since we are not changing the size (or format) of the context, there are no functional changes. v2: Use PPHWSP index for hws again. Suggested-by:
-
