- 23 May, 2021 10 commits
-
-
Ezequiel Garcia authored
The Hantro and Cedrus drivers work in frame-mode, meaning they expect all the slices in a picture (either frame or field structure) to be passed in each OUTPUT buffer. These two are the only V4L2 MPEG-2 stateless decoders currently supported. Given the VA-API drivers also work per-frame, coalescing all the MPEG-2 slices in a buffer before the decoding operation, it makes sense to not expect slice-mode drivers and therefore remove V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS. This is done to avoid carrying an unused interface. If needed, this control can be added without breaking backwards compatibility. Note that this would mean introducing a enumerator control to specify the decoding mode (see V4L2_CID_STATELESS_H264_DECODE_MODE). Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Co-developed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by:
Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
The MPEG2_SLICE_PARAMS control is designed to refer to a single slice. However, the Hantro and Cedrus drivers operate in per-frame mode, and so does the current Ffmpeg and GStreamer implementations that are tested with these two drivers. In other words, the drivers are expecting all the slices in a picture (with either frame or field structure) to be contained in the OUTPUT buffer, which means the slice size and offset shouldn't be used. Signed-off-by:
-
Ezequiel Garcia authored
The forward and backwards references are specified per-picture and not per-slice. Move it to V4L2_CID_MPEG_VIDEO_MPEG2_PICTURE. Signed-off-by:
-
Ezequiel Garcia authored
Typically, bitstreams are composed of a sequence header, followed by a number of picture header and picture coding extension headers. Each picture can be composed of a number of slices. Let's split the MPEG-2 uAPI to follow these semantics more closely, allowing more usage flexibility. Having these controls split up allows applications to set a sequence control at the beginning of a sequence, and then set a picture control for each frame. While here add padding fields where needed, and document the uAPI header thoroughly. Note that the V4L2_CTRL_TYPE_{} defines had to be moved because it clashes with existing ones. This is not really an issue since they will be re-defined when the controls are moved out of staging. Signed-off-by:Jonas Karlman <jonas@kwiboo.se> Tested-by:
-
Ezequiel Garcia authored
Our current MPEG-2 uAPI uses 1-byte fields for MPEG-2 boolean syntax elements. Clean these by adding a 'flags' field and flag macro for each boolean syntax element. A follow-up change will refactor this uAPI so we don't need to add padding fields just yet. Signed-off-by:
-
Ezequiel Garcia authored
As stated in the MPEG-2 specification, section 6.3.7 "Quant matrix extension": Each quantisation matrix has a default set of values. When a sequence_header_code is decoded all matrices shall be reset to their default values. User defined matrices may be downloaded and this can occur in a sequence_header() or in a quant_matrix_extension(). The load_intra_quantiser_matrix syntax elements are transmitted in the bitstream headers, signalling that a quantisation matrix needs to be loaded and used for pictures transmitted afterwards (until the matrices are reset). This "load" semantics are implemented in the V4L2 interface without the need of any "load" flags: passing the control is effectively a load. Therefore, rework the V4L2_CID_MPEG_VIDEO_MPEG2_QUANTISATION semantics to match the MPEG-2 semantics. Quantisation matrices values are now initialized by the V4L2 control core to their reset default value, and applications are expected to reset their values as specified. The quantisation control is therefore optional, and used to load bitstream-defined values in the quantisation matrices. Signed-off-by:
-
Ezequiel Garcia authored
The MPEG-2 specification refers to the quantisation matrices using the word "quantisation". Make the V4L2 interface more ergonomic by matching the MPEG-2 spec. Signed-off-by:
-
Pavel Skripkin authored
syzbot reported WARNING in vmalloc. The problem was in zero size passed to vmalloc. The root case was in wrong cxusb_bluebird_lgz201_properties definition. adapter array has only 1 entry, but num_adapters was 2. Call Trace: __vmalloc_node mm/vmalloc.c:2963 [inline] vmalloc+0x67/0x80 mm/vmalloc.c:2996 dvb_dmx_init+0xe4/0xb90 drivers/media/dvb-core/dvb_demux.c:1251 dvb_usb_adapter_dvb_init+0x564/0x860 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:184 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline] dvb_usb_device_init.cold+0xc94/0x146e drivers/media/usb/dvb-usb/dvb-usb-init.c:308 cxusb_probe+0x159/0x5e0 drivers/media/usb/dvb-usb/cxusb.c:1634 Fixes: 4d43e13f ("V4L/DVB (4643): Multi-input patch for DVB-USB device") Cc: stable@vger.kernel.org Reported-by: syzbot+7336195c02c1bd2f64e1@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Dan Carpenter authored
The adapter count is fixed at compile time so we can delete the lme2510_get_adapter_count() function and set ".num_adapters = 1" instead. There is also no need to create a zeroed adapter element at the end of the array. Remove that as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Christophe JAILLET authored
'ret' is known to be 1 here. In fact 'i' is expected instead. Store the return value of 'i2c_master_recv()' in 'ret' so that the error message print the correct error code. Fixes: acaa34bf ("media: rc: implement zilog transmitter") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 21 May, 2021 5 commits
-
-
wengjianfeng authored
change 'purpous' to 'purpose'. change 'frequecy' to 'frequency'. remove redundant words struct and enum. Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Signed-off-by:
-
Ye Bin authored
mutex lock can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). list head can be initialized automatically with LIST_HEAD() rather than explicitly calling INIT_LIST_HEAD(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Arnd Bergmann authored
I came across a randconfig build failure from one driver that only depends on CONFIG_USB_ARCH_HAS_HCD but fails when built without CONFIG_USB: ld: drivers/media/rc/ir_toy.o: in function `irtoy_disconnect': ir_toy.c:(.text+0x24): undefined reference to `usb_kill_urb' ld: ir_toy.c:(.text+0x2c): undefined reference to `usb_free_urb' ld: ir_toy.c:(.text+0x34): undefined reference to `usb_kill_urb' ld: ir_toy.c:(.text+0x3c): undefined reference to `usb_free_urb' Upon a closer look, I find that a lot of the other drivers 'select USB' rather than stating 'depends on USB' as is common for most subsystems. I also find that all except one driver have an extra 'depends on RC_CORE' that is already implied by the top-level 'if RC_CORE' check. Clean up both by reducing the dependencies to the required set. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Arnd Bergmann authored
The tango platform was removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Sean Young authored
This file has been updated many times since 2010. Signed-off-by:
-
- 20 May, 2021 11 commits
-
-
Mauro Carvalho Chehab authored
A typo there is causing two warnings: drivers/media/platform/davinci/vpif_display.c:114: warning: Function parameter or member 'nplanes' not described in 'vpif_buffer_queue_setup' drivers/media/platform/davinci/vpif_capture.c:112: warning: Function parameter or member 'nplanes' not described in 'vpif_buffer_queue_setup' Signed-off-by: -
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. While there's nothing wrong with the current usage on this driver, as we're getting rid of the pm_runtime_get_sync() call all over the media subsystem, let's remove the last occurrence on this driver. Reviewed-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. As a bonus, pm_runtime_resume_and_get() always return 0 on success. So, the code can be simplified. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. As a bonus, pm_runtime_resume_and_get() always return 0 on success. So, the code can be simplified. Signed-off-by:
-
- 19 May, 2021 14 commits
-
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. As a bonus, there's no need to check if ret == 1, as pm_runtime_resume_and_get() always return 0 on success. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
Robert Foss <robert.foss@linaro.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. While here, as noted by Phillip, the labels at the coda_open() function are currently named after what operation failed, instead of what they do in response. So, change the name of the error label that it is called when clk_enable fails, in order to be consistent. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. While the hva driver does it right, there are lots of errors on other drivers due to its misusage. So, let's change this driver to also use pm_runtime_resume_and_get(), as we're doing similar changes all over the media subsystem. Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Signed-off-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Acked-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Reviewed-by:
-
Mauro Carvalho Chehab authored
Commit dd8088d5 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") added pm_runtime_resume_and_get() in order to automatically handle dev->power.usage_count decrement on errors. Use the new API, in order to cleanup the error check logic. Besides that, the de-init order in case of css error was wrong. This change should also fix that. Signed-off-by:
-
