- 07 Aug, 2017 28 commits
-
-
Lior David authored
commit dfb5b098 upstream. When FW crashes with no_fw_recovery option, driver waits for manual recovery with wil->mutex held, this can easily create deadlocks. Fix the problem by moving the wait outside the lock. Signed-off-by:
Lior David <qca_liord@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Kazior authored
commit 18ae68ff upstream. WMI ops wrappers did not properly check for null function pointers for spectral scan. This caused null dereference crash with WMI-TLV based firmware which doesn't implement spectral scan. The crash could be triggered with: ip link set dev wlan0 up echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl The crash looked like this: [ 168.031989] BUG: unable to handle kernel NULL pointer dereference at (null) [ 168.037406] IP: [< (null)>] (null) [ 168.040395] PGD cdd4067 PUD fa0f067 PMD 0 [ 168.043303] Oops: 0010 [#1] SMP [ 168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211] [ 168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G W O 4.8.0 #78 [ 168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000 [ 168.061736] RIP: 0010:[<0000000000000000>] [< (null)>] (null) ... [ 168.100620] Call Trace: [ 168.101910] [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core] [ 168.104871] [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0 [ 168.106696] [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core] [ 168.109618] [<ffffffff812da3a1>] full_proxy_write+0x51/0x80 [ 168.111443] [<ffffffff811957b8>] __vfs_write+0x28/0x120 [ 168.113090] [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0 [ 168.114932] [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60 [ 168.116680] [<ffffffff811965f8>] vfs_write+0xb8/0x1a0 [ 168.118293] [<ffffffff81197966>] SyS_write+0x46/0xa0 [ 168.119912] [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 168.121737] Code: Bad RIP value. [ 168.123318] RIP [< (null)>] (null) Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
Annie Cherkaev authored
commit 9f5af546 upstream. This fixes a potential buffer overflow in isdn_net.c caused by an unbounded strcpy. [ ISDN seems to be effectively unmaintained, and the I4L driver in particular is long deprecated, but in case somebody uses this.. - Linus ] Signed-off-by:
Jiten Thakkar <jitenmt@gmail.com> Signed-off-by:
Annie Cherkaev <annie.cherk@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jia-Ju Bai authored
commit e8f4ae85 upstream. The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Fainelli authored
commit 0878fff1 upstream. The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by:
Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Sudip Mukherjee authored
commit b6355fb3 upstream. We are checking phy after dereferencing it. We can print the debug information after checking it. If phy is NULL then we will get a good stack trace to tell us that we are in this irq handler. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Brian Foster authored
commit 04197b34 upstream. We've had reports of generic/095 causing XFS to BUG() in __xfs_get_blocks() due to the existence of delalloc blocks on a direct I/O read. generic/095 issues a mix of various types of I/O, including direct and memory mapped I/O to a single file. This is clearly not supported behavior and is known to lead to such problems. E.g., the lack of exclusion between the direct I/O and write fault paths means that a write fault can allocate delalloc blocks in a region of a file that was previously a hole after the direct read has attempted to flush/inval the file range, but before it actually reads the block mapping. In turn, the direct read discovers a delalloc extent and cannot proceed. While the appropriate solution here is to not mix direct and memory mapped I/O to the same regions of the same file, the current BUG_ON() behavior is probably overkill as it can crash the entire system. Instead, localize the failure to the I/O in question by returning an error for a direct I/O that cannot be handled safely due to delalloc blocks. Be careful to allow the case of a direct write to post-eof delalloc blocks. This can occur due to speculative preallocation and is safe as post-eof blocks are not accompanied by dirty pages in pagecache (conversely, preallocation within eof must have been zeroed, and thus dirtied, before the inode size could have been increased beyond said blocks). Finally, provide an additional warning if a direct I/O write occurs while the file is memory mapped. This may not catch all problematic scenarios, but provides a hint that some known-to-be-problematic I/O methods are in use. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Acked-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Adrian Hunter authored
commit f952eace upstream. Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is not updated when a branch target has been suppressed, which is indicated by IPBytes == 0. IPBytes is stored in the packet 'count', so ensure never to set 'last_ip' when packet 'count' is zero. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1495786658-18063-7-git-send-email-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 622b7a47 upstream. The decoder will try to use branch packets to find an IP to start decoding or to recover from errors. Currently the FUP packet is used only in the case of an overflow, however there is no reason for that to be a special case. So just use FUP always when scanning for an IP. Signed-off-by:
-
Adrian Hunter authored
commit ee14ac0e upstream. Intel PT uses IP compression based on the last IP. For decoding purposes, 'last IP' is considered to be reset to zero whenever there is a synchronization packet (PSB). The decoder wasn't doing that, and was treating the zero value to mean that there was no last IP, whereas compression can be done against the zero value. Fix by setting last_ip to zero when a PSB is received and keep track of have_last_ip. Signed-off-by:
-
Adrian Hunter authored
commit e1717e04 upstream. The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer to section 36.4.2.2 Target IP (TIP) Packet - IP Compression. Existing Intel PT packet decoder did not support type 4, and got type 6 wrong. Because type 3 and type 4 have the same number of bytes, the packet 'count' has been changed from being the number of ip bytes to being the type code. That allows the Intel PT decoder to correctly decide whether to sign-extend or use the last ip. However that also meant the code had to be adjusted in a number of places. Currently hardware is not using the new compression types, so this fix has no effect on existing hardware. Signed-off-by:
-
Laurent Pinchart authored
commit 4f7b0d26 upstream. It isn't safe to call drm_dev_unregister() without first initializing mode setting with drm_mode_config_init(). This leads to a crash if either IO memory can't be remapped or vblank initialization fails. Fix this by reordering the initialization sequence. Move vblank initialization after the drm_mode_config_init() call, and move IO remapping before drm_dev_alloc() to avoid the need to perform clean up in case of failure. While at it remove the explicit drm_vblank_cleanup() call from rcar_du_remove() as the drm_dev_unregister() function already cleans up vblank. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
thongsyho <thong.ho.px@rvc.renesas.com> Signed-off-by:
Nhan Nguyen <nhan.nguyen.yb@renesas.com> Signed-off-by:
-
Laurent Pinchart authored
commit c1d4b38c upstream. The drm driver .load() operation is prone to race conditions as it initializes the driver after registering the device nodes. Its usage is deprecated, inline it in the probe function and call drm_dev_alloc() and drm_dev_register() explicitly. For consistency inline the .unload() handler in the remove function as well. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 0a346629 upstream. Again since the drm core takes care of event unlinking/disarming this is now just needless code. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Daniel Stone <daniels@collabora.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-10-git-send-email-daniel.vetter@ffwll.chSigned-off-by:
-
Cheah Kok Cheong authored
commit bf279ece upstream. Move comedi_proc_init to the end to avoid orphaned proc entry if module loading failed. Signed-off-by:
Cheah Kok Cheong <thrust73@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 8c92870b which is commit ba4a648f upstream. Michal Hocko writes: JFYI. We have encountered a regression after applying this patch on a large ppc machine. While the patch is the right thing to do it doesn't work well with the current vmalloc area size on ppc and large machines where NUMA nodes are very far from each other. Just for the reference the boot fails on such a machine with bunch of warning preceeding it. See http://lkml.kernel.org/r/20170724134240.GL25221@dhcp22.suse.cz It seems the right thing to do is to enlarge the vmalloc space on ppc but this is not the case in the upstream kernel yet AFAIK. It is also questionable whether that is a stable material but I will decision on you here. We have reverted this patch from our 4.4 based kernel. Newer kernels do not have enlarged vmalloc space yet AFAIK so they won't work properly eiter. This bug is quite rare though because you need a specific HW configuration to trigger the issue - namely NUMA nodes have to be far away from each other in the physical memory space. Cc: Michal Hocko <mhocko@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Paul Mackerras authored
commit 7ceaa6dc upstream. At present, HV KVM on POWER8 and POWER9 machines loses any instruction or data breakpoint set in the host whenever a guest is run. Instruction breakpoints are currently only used by xmon, but ptrace and the perf_event subsystem can set data breakpoints as well as xmon. To fix this, we save the host values of the debug registers (CIABR, DAWR and DAWRX) before entering the guest and restore them on exit. To provide space to save them in the stack frame, we expand the stack frame allocated by kvmppc_hv_entry() from 112 to 144 bytes. [paulus@ozlabs.org - Adjusted stack offsets since we aren't saving POWER9-specific registers.] Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Paul Mackerras authored
Commit 46a704f8 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly", 2017-06-15) added code which assumes that the kernel is able to handle a TM (transactional memory) unavailable interrupt from userspace by reloading the TM-related registers and enabling TM for the process. That ability was added in the 4.9 kernel; earlier kernel versions simply panic on getting the TM unavailable interrupt. Since commit 46a704f8 has been backported to the 4.4 stable tree as commit 824b9506, 4.4.75 and subsequent versions are vulnerable to a userspace-triggerable panic. This patch fixes the problem by explicitly reloading the TM-related registers before returning to userspace, rather than disabling TM for the process. Commit 46a704f8 also failed to enable TM for the kernel, leading to a TM unavailable interrupt in the kernel, causing an oops. This fixes that problem too, by enabling TM before accessing the TM registers. That problem is fixed upstream by the patch "KVM: PPC: Book3S HV: Enable TM before accessing TM registers". Fixes: 824b9506 ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly") Signed-off-by:
-
Paul Mackerras authored
commit 4c3bb4cc upstream. This restores several special-purpose registers (SPRs) to sane values on guest exit that were missed before. TAR and VRSAVE are readable and writable by userspace, and we need to save and restore them to prevent the guest from potentially affecting userspace execution (not that TAR or VRSAVE are used by any known program that run uses the KVM_RUN ioctl). We save/restore these in kvmppc_vcpu_run_hv() rather than on every guest entry/exit. FSCR affects userspace execution in that it can prohibit access to certain facilities by userspace. We restore it to the normal value for the task on exit from the KVM_RUN ioctl. IAMR is normally 0, and is restored to 0 on guest exit. However, with a radix host on POWER9, it is set to a value that prevents the kernel from executing user-accessible memory. On POWER9, we save IAMR on guest entry and restore it on guest exit to the saved value rather than 0. On POWER8 we continue to set it to 0 on guest exit. PSPB is normally 0. We restore it to 0 on guest exit to prevent userspace taking advantage of the guest having set it non-zero (which would allow userspace to set its SMT priority to high). UAMOR is normally 0. We restore it to 0 on guest exit to prevent the AMR from being used as a covert channel between userspace processes, since the AMR is not context-switched at present. [paulus@ozlabs.org - removed IAMR bits that are only needed on POWER9; adjusted FSCR save/restore for lack of fscr field in thread_struct.] Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
-
Paul Mackerras authored
commit ca8efa1d upstream. This adds code to save the values of three SPRs (special-purpose registers) used by userspace to control event-based branches (EBBs), which are essentially interrupts that get delivered directly to userspace. These registers are loaded up with guest values when entering the guest, and their values are saved when exiting the guest, but we were not saving the host values and restoring them before going back to userspace. On POWER8 this would only affect userspace programs which explicitly request the use of EBBs and also use the KVM_RUN ioctl, since the only source of EBBs on POWER8 is the PMU, and there is an explicit enable bit in the PMU registers (and those PMU registers do get properly context-switched between host and guest). On POWER9 there is provision for externally-generated EBBs, and these are not subject to the control in the PMU registers. Since these registers only affect userspace, we can save them when we first come in from userspace and restore them before returning to userspace, rather than saving/restoring the host values on every guest entry/exit. Similarly, we don't need to worry about their values on offline secondary threads since they execute in the context of the idle task, which never executes in userspace. Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
-
Ben Skeggs authored
commit 38bcb208 upstream. Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Sinclair Yeh authored
commit fcfffdd8 upstream. The current code does not look correct, and the reason for it is probably lost. Since this now generates a compiler warning, fix it to what makes sense. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Ofer Heifetz authored
commit 7e96d559 upstream. Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Herbert Xu authored
commit 41cdf7a4 upstream. When authencesn is used together with digest_null a crash will occur on the decrypt path. This is because normally we perform a special setup to preserve the ESN, but this is skipped if there is no authentication. However, on the post-authentication path it always expects the preservation to be in place, thus causing a crash when digest_null is used. This patch fixes this by also skipping the post-processing when there is no authentication. Fixes: 104880a6 ("crypto: authencesn - Convert to new AEAD...") Reported-by:
Jan Tluka <jtluka@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Laurent Vivier authored
commit 4fd1bd44 upstream. As for commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"), the call to of_node_put() must be removed from pSeries_reconfig_remove_node(). dlpar_detach_node() and pSeries_reconfig_remove_node() both call of_detach_node(), and thus the node should not be released in both cases. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Eric Dumazet authored
commit b2504a5d upstream. Dmitry reported warnings occurring in __skb_gso_segment() [1] All SKB_GSO_DODGY producers can allow user space to feed packets that trigger the current check. We could prevent them from doing so, rejecting packets, but this might add regressions to existing programs. It turns out our SKB_GSO_DODGY handlers properly set up checksum information that is needed anyway when packets needs to be segmented. By checking again skb_needs_check() after skb_mac_gso_segment(), we should remove these pesky warnings, at a very minor cost. With help from Willem de Bruijn [1] WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20 Call Trace: [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline] [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline] [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline] [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline] [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Joel Fernandes authored
commit 10970449 upstream. Currently pstore has a global spinlock for all zones. Since the zones are independent and modify different areas of memory, there's no need to have a global lock, so we should use a per-zone lock as introduced here. Also, when ramoops's ftrace use-case has a FTRACE_PER_CPU flag introduced later, which splits the ftrace memory area into a single zone per CPU, it will eliminate the need for locking. In preparation for this, make the locking optional. Signed-off-by:
Joel Fernandes <joelaf@google.com> [kees: updated commit message] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Yuejie Shi authored
commit 89e357d8 upstream. A dump may come in the middle of another dump, modifying its dump structure members. This race condition will result in NULL pointer dereference in kernel. So add a lock to prevent that race. Fixes: 83321d6b ("[AF_KEY]: Dump SA/SP entries non-atomically") Signed-off-by:
Yuejie Shi <syjcnss@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Signed-off-by:
-
- 27 Jul, 2017 12 commits
-
-
Greg Kroah-Hartman authored
-
Greg Hackmann authored
Commit ff86bf0c ("alarmtimer: Rate limit periodic intervals") sets a minimum bound on the alarm timer interval. This minimum bound shouldn't be applied if the interval is 0. Otherwise, one-shot timers will be converted into periodic ones. Fixes: ff86bf0c ("alarmtimer: Rate limit periodic intervals") Reported-by:
Ben Fennema <fennema@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Cc: stable@vger.kernel.org Cc: John Stultz <john.stultz@linaro.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chunyu Hu authored
commit db9108e0 upstream. Hit the kmemleak when executing instance_rmdir, it forgot releasing mem of tracing_cpumask. With this fix, the warn does not appear any more. unreferenced object 0xffff93a8dfaa7c18 (size 8): comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s) hex dump (first 8 bytes): ff ff ff ff ff ff ff ff ........ backtrace: [<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280 [<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30 [<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10 [<ffffffff88571ab0>] instance_mkdir+0x90/0x240 [<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70 [<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0 [<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100 [<ffffffff88403857>] do_syscall_64+0x67/0x150 [<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com Fixes: ccfe9e42 ("tracing: Make tracing_cpumask available for all instances") Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Bjorn Andersson authored
commit d50daa2a upstream. Include the OF-based modalias in the uevent sent when registering SPMI devices, so that user space has a chance to autoload the kernel module for the device. Tested-by:
Rob Clark <robdclark@gmail.com> Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Stephen Boyd authored
commit 7a3b7cd3 upstream. The ULPI bus can be built as a module, and it will soon be calling these functions when it supports probing devices from DT. Export them so they can be used by the ULPI module. Acked-by:
Rob Herring <robh@kernel.org> Cc: <devicetree@vger.kernel.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Imre Deak authored
commit 636c4c3e upstream. Currently we may process up/down message transactions containing uninitialized data. This can happen if there was an error during the reception of any message in the transaction, but we happened to receive the last message correctly with the end-of-message flag set. To avoid this abort the reception of the transaction when the first error is detected, rejecting any messages until a message with the start-of-message flag is received (which will start a new transaction). This is also what the DP 1.4 spec 2.11.8.2 calls for in this case. In addtion this also prevents receiving bogus transactions without the first message with the the start-of-message flag set. v2: - unchanged v3: - git add the part that actually skips messages after an error in drm_dp_sideband_msg_build() Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lyude <lyude@redhat.com> Signed-off-by:
-
Imre Deak authored
commit 7f8b3987 upstream. In case of an unknown broadcast message is sent mstb will remain unset, so check for this. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Imre Deak authored
commit 448421b5 upstream. Handle any error due to partial reads, timeouts etc. to avoid parsing uninitialized data subsequently. Also bail out if the parsing itself fails. Cc: Dave Airlie <airlied@redhat.com> Cc: Lyude <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ismail, Mustafa authored
commit a62ab66b upstream. Initialize the port_num for iWARP in rdma_init_qp_attr. Fixes: 5ecce4c9("Check port number supplied by user verbs cmds") Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Yan, Zheng authored
commit 84583cfb upstream. For a large directory, program needs to issue multiple readdir syscalls to get all dentries. When there are multiple programs read the directory concurrently. Following sequence of events can happen. - program calls readdir with pos = 2. ceph sends readdir request to mds. The reply contains N1 entries. ceph adds these N1 entries to readdir cache. - program calls readdir with pos = N1+2. The readdir is satisfied by the readdir cache, N2 entries are returned. (Other program calls readdir in the middle, which fills the cache) - program calls readdir with pos = N1+N2+2. ceph sends readdir request to mds. The reply contains N3 entries and it reaches directory end. ceph adds these N3 entries to the readdir cache and marks directory complete. The second readdir call does not update fi->readdir_cache_idx. ceph add the last N3 entries to wrong places. Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Michael Gugino authored
commit 5a1d4c5d upstream. Add support for USB Device TP-Link TL-WN722N v2. VendorID: 0x2357, ProductID: 0x010c Signed-off-by:
Michael Gugino <michael.gugino.2@gmail.com> Signed-off-by:
-
Ingo Molnar authored
commit 6a8a75f3 upstream. This reverts commit cc1582c2. This commit introduced a regression that broke rr-project, which uses sampling events to receive a signal on overflow (but does not care about the contents of the sample). These signals are critical to the correct operation of rr. There's been some back and forth about how to fix it - but to not keep applications in limbo queue up a revert. Reported-by:
Kyle Huey <me@kylehuey.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20170628105600.GC5981@leverpostejSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
