- 03 Nov, 2017 40 commits
-
-
Jiri Pirko authored
In sch_handle_egress and sch_handle_ingress tp->q is used only in order to update stats. So stats and filter list are the only things that are needed in clsact qdisc fastpath processing. Introduce new mini_Qdisc struct to hold those items. Also, introduce a helper to swap the mini_Qdisc structures in case filter list head changes. This removes need for tp->q usage without added overhead. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add a callback that is to be called whenever head of the chain changes. Also provide a callback for the default case when the caller gets a block using non-extended getter. Signed-off-by:
-
David S. Miller authored
Lipeng says: ==================== net: hns3: support set_link_ksettings and for nway_reset ethtool command This patch-set adds support for set_link_ksettings && for nway_resets ethtool command and fixes some related ethtool bugs. 1, patch[4/6] adds support for ethtool_ops.set_link_ksettings. 2, patch[5/6] adds support ethtool_ops.for nway_reset. 3, patch[1/6,2/6,3/6,6/6] fix some bugs for getting port information by ethtool command(ethtool ethx). ==================== Signed-off-by: -
Fuyun Liang authored
This patch fixes a bug for phy supported feature initialization. Currently, the value of phydev->supported is initialized by kernel. So it includes many features that we do not support, such as SUPPORTED_FIBRE and SUPPORTED_BNC. This patch fixes it. Fixes: 256727da (net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC) Signed-off-by:
Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by:
Lipeng <lipeng321@huawei.com> Signed-off-by:
-
Fuyun Liang authored
This patch adds nway_reset support for ethtool cmd. Signed-off-by:
-
Fuyun Liang authored
This patch adds set_link_ksettings support for ethtool cmd. Signed-off-by:
-
Fuyun Liang authored
The value of link_modes.advertising and the value of link_modes.supported is initialized to zero every time in for loop in hns3_driv_to_eth_caps(). But we just want to set specified bit for them. Initialization is unnecessary. This patch fixes it. Fixes: 496d03e9 (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by:
-
Fuyun Liang authored
This patch fixes a bug for ethtool's get_link_ksettings(). The advertising for autoneg is always added to advertised_caps whether autoneg is enable or disable. This patch fixes it. Fixes: 496d03e9 (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by:
-
Fuyun Liang authored
This patch fixes a bug for ethtool's get_link_ksettings(). When phy exists, we should get autoneg from phy rather than from mac. Because the value of mac.autoneg is invalid when phy exists. Fixes: 496d03e9 (net: hns3: Add Ethtool support to HNS3 driver) Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Fix IRQ coalescing regressions. There was a typo and missing guard-rail against illegal values in the recent code clean up. All reported by Andy Gospodarek. ==================== Signed-off-by: -
Michael Chan authored
Recent IRQ coalescing clean up has removed a guard-rail for the max DMA buffer coalescing value. This is a 6-bit value and must not be 0. We already have a check for 0 but 64 is equivalent to 0 and will cause non-stop interrupts. Fix it by adding the proper check. Fixes: f8503969 ("bnxt_en: Refactor and simplify coalescing code.") Reported-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Andy Gospodarek authored
Recent refactoring of coalesce settings contained a typo that prevents receive settings from being set properly. Fixes: 18775aa8 ("bnxt_en: Reorganize the coalescing parameters.") Signed-off-by:
-
Cong Wang authored
Callers of tcf_block_put() could pass NULL so we can't use block->q before checking if block is NULL or not. tcf_block_put_ext() callers are fine, it is always non-NULL. Fixes: 8c4083b3 ("net: sched: add block bind/unbind notif. and extended block_get/put") Reported-by:
Dave Taht <dave.taht@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Eric Dumazet authored
While stress testing MTU probing, we had crashes in list_del() that we root-caused to the fact that tcp_fragment() is unconditionally inserting the freshly allocated skb into tsorted_sent_queue list. But this list is supposed to contain skbs that were sent. This was mostly harmless until MTU probing was enabled. Fortunately we can use the tcp_queue enum added later (but in same linux version) for rtx-rb-tree to fix the bug. Fixes: e2080072 ("tcp: new list for sent but unacked skbs for RACK recovery") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Priyaranjan Jha <priyarjha@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Geliang Tang <geliangtang@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114780 Addresses-Coverity-ID: 114781 Addresses-Coverity-ID: 114782 Addresses-Coverity-ID: 114783 Addresses-Coverity-ID: 114784 Addresses-Coverity-ID: 114785 Addresses-Coverity-ID: 114786 Addresses-Coverity-ID: 114787 Addresses-Coverity-ID: 114788 Addresses-Coverity-ID: 114789 Addresses-Coverity-ID: 114790 Addresses-Coverity-ID: 114791 Addresses-Coverity-ID: 114792 Addresses-Coverity-ID: 114793 Addresses-Coverity-ID: 114794 Addresses-Coverity-ID: 114795 Addresses-Coverity-ID: 200521 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Colin Ian King authored
Currently gen_flags is being operated on by a logical && operator rather than a bitwise & operator. This looks incorrect as these should be bit flag operations. Fix this. Detected by CoverityScan, CID#1460305 ("Logical vs. bitwise operator") Fixes: 3f7889c4 ("net: sched: cls_bpf: call block callbacks for offload) Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
icsk_accept_queue.fastopenq.lock is only fully initialized at listen() time. LOCKDEP is not happy if we attempt a spin_lock_bh() on it, because of missing annotation. (Although kernel runs just fine) Lets use net->ipv4.tcp_fastopen_ctx_lock to protect ctx access. Fixes: 1fba70e5 ("tcp: socket option to set TCP fast open key") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Craig Gallek authored
do_check() can fail early without allocating env->cur_state under memory pressure. Syzkaller found the stack below on the linux-next tree because of this. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c2c74700 task.stack: ffff8801c3e28000 RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline] RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380 RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28 R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20 FS: 00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166 SYSC_bpf kernel/bpf/syscall.c:1690 [inline] SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x452869 RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869 RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005 RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550 R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000 Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26 RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8 RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8 ---[ end trace c8d37f339dc64004 ]--- Fixes: 638f5b90 ("bpf: reduce verifier memory consumption") Fixes: 1969db47 ("bpf: fix verifier memory leaks") Signed-off-by:Craig Gallek <kraig@google.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
-
Jon Maloy authored
The neighbor monitor employs a threshold, default set to 32 peer nodes, where it activates the "Overlapping Neighbor Monitoring" algorithm. Below that threshold, monitoring is full-mesh, and no "domain records" are passed between the nodes. Because of this, a node never received a peer's ack that it has received the most recent update of the own domain. Hence, the field 'acked_gen' in struct tipc_monitor_state remains permamently at zero, whereas the own domain generation is incremented for each added or removed peer. This has the effect that the function tipc_mon_get_state() always sets the field 'probing' in struct tipc_monitor_state true, again leading the tipc_link_timeout() of the link in question to always send out a probe, even when link->silent_intv_count is zero. This is functionally harmless, but leads to some unncessary probing, which can easily be eliminated by setting the 'probing' field of the said struct correctly in such cases. At the same time, we explictly invalidate the sent domain records when the algorithm is not activated. This will eliminate any risk that an invalid domain record might be inadverently accepted by the peer. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jiri Pirko authored
Currently, the offload unbind is done before the chains are flushed. That causes driver to unregister block callback before it can get all the callback calls done during flush, leaving the offloaded tps inside the HW. So fix the order to prevent this situation and restore the original behaviour. Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Reported-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Ganesh Goudar authored
Add support to new ethtool operation get_fecparam to fetch FEC parameters. Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ganesh Goudar authored
Add 0x6086 T6 device id. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: net/ncsi/ncsi-manage.c:41:5: warning: symbol 'ncsi_get_filter' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Allen Pais authored
switch to using the new timer_setup() and from_timer() api's. Signed-off-by:
Allen Pais <allen.pais@oracle.com> Signed-off-by:
-
Allen Pais authored
switch to using the new timer_setup() and from_timer() api's. Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Align multipath hash parameters with kernel's Ido says: This set makes sure the device is using the same parameters as the kernel when it computes the multipath hash during IP forwarding. First patch adds a new netevent to let interested listeners know that the multipath hash policy has changed. Next two patches do small and non-functional changes in the mlxsw driver. Last patches configure the multipath hash policy upon driver initialization and as a response to netevents. ==================== Signed-off-by: -
Ido Schimmel authored
Make sure the device and the kernel are performing the multipath hash according to the same parameters by updating the device whenever the relevant netevent is generated. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Up until now we used the hardware's defaults for multipath hash computation. This patch aligns the hardware's multipath parameters with the kernel's. For IPv4 packets, the parameters are determined according to the 'fib_multipath_hash_policy' sysctl during module initialization. In case L3-mode is requested, only the source and destination IP addresses are used. There is no special handling of ICMP error packets. In case L4-mode is requested, a 5-tuple is used: source and destination IP addresses, source and destination ports and IP protocol. Note that the layer 4 fields are not considered for fragmented packets. For IPv6 packets, the source and destination IP addresses are used, as well as the flow label and the next header fields. Signed-off-by:
-
Ido Schimmel authored
The RECRv2 register is used for setting up the router's ECMP hash configuration. Signed-off-by:
-
Ido Schimmel authored
The struct containing the work item queued from the netevent handler is named after the only event it is currently used for, which is neighbour updates. Use a more appropriate name for the struct, as we are going to use it for more events. Signed-off-by:
-
Ido Schimmel authored
We are going to need to respond to netevents notifying us about multipath hash updates by configuring the device's hash parameters. Embed the netevent notifier in the router struct so that we could retrieve it upon notifications and use it to configure the device. Signed-off-by:
-
Ido Schimmel authored
Devices performing IPv4 forwarding need to update their multipath hash policy whenever it is changed. Inform these devices by generating a netevent. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from thecxgb4_alloc_atid() error handling case instead of 0. Fixes: 12b276fb ("cxgb4: add support to create hash filters") Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
-
Arnd Bergmann authored
The bpf_verifer_ops array is generated dynamically and may be empty depending on configuration, which then causes an out of bounds access: kernel/bpf/verifier.c: In function 'bpf_check': kernel/bpf/verifier.c:4320:29: error: array subscript is above array bounds [-Werror=array-bounds] This adds a check to the start of the function as a workaround. I would assume that the function is never called in that configuration, so the warning is probably harmless. Fixes: 00176a34 ("bpf: remove the verifier ops from program structure") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Arnd Bergmann authored
I ran into this link error with the latest net-next plus linux-next trees when networking is disabled: kernel/bpf/verifier.o:(.rodata+0x2958): undefined reference to `tc_cls_act_analyzer_ops' kernel/bpf/verifier.o:(.rodata+0x2970): undefined reference to `xdp_analyzer_ops' It seems that the code was written to deal with varying contents of the arrray, but the actual #ifdef was missing. Both tc_cls_act_analyzer_ops and xdp_analyzer_ops are defined in the core networking code, so adding a check for CONFIG_NET seems appropriate here, and I've verified this with many randconfig builds Fixes: 4f9218aa ("bpf: move knowledge about post-translation offsets out of verifier") Signed-off-by:
-
Egil Hjelmeland authored
The lan9303 driver defines eth_stp_addr as a synonym to eth_reserved_addr_base to get the STP ethernet address 01:80:c2:00:00:00. eth_reserved_addr_base is also used to define the start of Bridge Reserved ethernet address range, which happen to be the STP address. br_dev_setup refer to eth_reserved_addr_base as a definition of STP address. Clean up by: - Move the eth_stp_addr definition to linux/etherdevice.h - Use eth_stp_addr instead of eth_reserved_addr_base in br_dev_setup. Signed-off-by:
Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Felix Manlunas authored
Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Acked-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
-
Song Liu authored
This tracepoint can be used to trace synack retransmits. It maintains pointer to struct request_sock. We cannot simply reuse trace_tcp_retransmit_skb() here, because the sk here is the LISTEN socket. The IP addresses and ports should be extracted from struct request_sock. Note that, like many other tracepoints, this patch uses IS_ENABLED in TP_fast_assign macro, which triggers sparse warning like: ./include/trace/events/tcp.h:274:1: error: directive in argument list ./include/trace/events/tcp.h:281:1: error: directive in argument list However, there is no good solution to avoid these warnings. To the best of our knowledge, these warnings are harmless. Signed-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Tom Herbert authored
RFC 8200 (IPv6) defines Hop-by-Hop options and Destination options extension headers. Both of these carry a list of TLVs which is only limited by the maximum length of the extension header (2048 bytes). By the spec a host must process all the TLVs in these options, however these could be used as a fairly obvious denial of service attack. I think this could in fact be a significant DOS vector on the Internet, one mitigating factor might be that many FWs drop all packets with EH (and obviously this is only IPv6) so an Internet wide attack might not be so effective (yet!). By my calculation, the worse case packet with TLVs in a standard 1500 byte MTU packet that would be processed by the stack contains 1282 invidual TLVs (including pad TLVS) or 724 two byte TLVs. I wrote a quick test program that floods a whole bunch of these packets to a host and sure enough there is substantial time spent in ip6_parse_tlv. These packets contain nothing but unknown TLVS (that are ignored), TLV padding, and bogus UDP header with zero payload length. 25.38% [kernel] [k] __fib6_clean_all 21.63% [kernel] [k] ip6_parse_tlv 4.21% [kernel] [k] __local_bh_enable_ip 2.18% [kernel] [k] ip6_pol_route.isra.39 1.98% [kernel] [k] fib6_walk_continue 1.88% [kernel] [k] _raw_write_lock_bh 1.65% [kernel] [k] dst_release This patch adds configurable limits to Destination and Hop-by-Hop options. There are three limits that may be set: - Limit the number of options in a Hop-by-Hop or Destination options extension header. - Limit the byte length of a Hop-by-Hop or Destination options extension header. - Disallow unrecognized options in a Hop-by-Hop or Destination options extension header. The limits are set in corresponding sysctls: ipv6.sysctl.max_dst_opts_cnt ipv6.sysctl.max_hbh_opts_cnt ipv6.sysctl.max_dst_opts_len ipv6.sysctl.max_hbh_opts_len If a max_*_opts_cnt is less than zero then unknown TLVs are disallowed. The number of known TLVs that are allowed is the absolute value of this number. If a limit is exceeded when processing an extension header the packet is dropped. Default values are set to 8 for options counts, and set to INT_MAX for maximum length. Note the choice to limit options to 8 is an arbitrary guess (roughly based on the fact that the stack supports three HBH options and just one destination option). These limits have being proposed in draft-ietf-6man-rfc6434-bis. Tested (by Martin Lau) I tested out 1 thread (i.e. one raw_udp process). I changed the net.ipv6.max_dst_(opts|hbh)_number between 8 to 2048. With sysctls setting to 2048, the softirq% is packed to 100%. With 8, the softirq% is almost unnoticable from mpstat. v2; - Code and documention cleanup. - Change references of RFC2460 to be RFC8200. - Add reference to RFC6434-bis where the limits will be in standard. Signed-off-by:Tom Herbert <tom@quantonium.net> Signed-off-by:
-
