* acpi-soc:
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller

* acpi-bus:
  ACPI / bus: Add INT0002 to list of always-present devices
  ACPI / bus: Introduce a list of ids for "always present" devices

* acpi-pmic:
  ACPI / PMIC: xpower: Fix power_table addresses

* acpi-power:
  ACPI / power: Delay turning off unused power resources after suspend

* acpica:
  ACPICA: Update version to 20170303
  ACPICA: iasl: add ASL conversion tool
  ACPICA: Local cache support: Allow small cache objects
  ACPICA: Disassembler: Do not unconditionally remove temporary names
  ACPICA: iasl: Fix IORT SMMU GSI disassembling
  ACPICA: Cleanup AML opcode definitions, no functional change
  ACPICA: Debugger: Add interpreter blocking mark for single-step mode
  ACPICA: debugger: fix memory leak on Pathname
  ACPICA: Update for automatic repair code for objects returned by evaluate_object
  ACPICA: Namespace: fix operand cache leak
  ACPICA: Fix several incorrect invocations of ACPICA return macro
  ACPICA: Fix a module for excessive debug output
  ACPICA: Update some function headers, no funtional change
  ACPICA: Disassembler: Enhance resource descriptor detection
  ACPICA: Add non-linux host build support

Pull ACPI updates from Rafael Wysocki:
 "These are some device enumeration code changes, updates of the AC and
  battery drivers to help them avoid attaching to devices that cannot be
  handled by them, new operation region driver for the Intel CHT Whiskey
  Cove PMIC, new sysfs entries for CPPC performance capabilities, a new
  _REV quirk blacklist entry and a couple of assorted minor fixes and
  cleanups.

  Specifics:

   - Update the core device enumeration code to make it more internally
     consistent and robust and drop the force_remove sysfs attribute
     that could be used to tell it to ignore errors on device
     hot-removal which was dangerous in general and no real and still
     relevant use cases for it could be found (Rafael Wysocki, Michal
     Hocko).

   - Make the core device enumeration code use _PXM to associate
     platform devices created by it with specific NUMA nodes (Shanker
     Donthineni).

   - Extend the CPPC library by adding more sysfs entries for
     performance capabilities to it and making it use the lowest
     nonlinear performance parameter (Prashanth Prakash).

   - Make the CPU online more consistent with CPU initialization in the
     ACPI processor driver (Prashanth Prakash).

   - Update the AC and battery drivers to help them avoid attaching to
     devices that cannot be handled by them and update the
     axp288_charger power supply driver to work correctly on ACPI
     systems without the INT3496 device (Hans de Goede).

   - Add an ACPI operation region driver for the Intel CHT Whiskey Cove
     PMIC and update the xpower operation region driver to work without
     IIO which isn't really necessary for it to work (Hans de Goede).

   - Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist
     (Kai Heng Feng).

   - Make the code in the ACPI video driver easier to follow by adding
     symbols and comments to it (Dmitry Frank).

   - Update ACPI documentation and drop a function that has no users
     from the tables-handling code (Cao jin, Baoquan He)"

* tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: Stop xpower OPRegion handler relying on IIO
  ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
  ACPI / scan: Avoid enumerating devices more than once
  ACPI / scan: Apply default enumeration to devices with ACPI drivers
  power: supply: axp288_charger: Only wait for INT3496 device if present
  ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver
  ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver
  ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors
  ACPI / utils: Add new acpi_dev_present helper
  ACPI / video: add comments about subtle cases
  ACPI / video: get rid of magic numbers and use enum instead
  ACPI / doc: linuxized-acpica.txt: fix typos
  ACPI / blacklist: add _REV quirk for Dell Inspiron 7537
  ACPI / tables: Drop acpi_parse_entries() which is not used
  ACPI / CPPC: add sysfs entries for CPPC perf capabilities
  ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps()
  ACPI / platform: Update platform device NUMA node based on _PXM method
  ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add()
  ACPI / scan: Drop support for force_remove

Commit 660b1113 (ACPI / PM: Fix consistency check for power resources
during resume) introduced a check for ACPI power resources which have
been turned on by the BIOS during suspend and turns these back off again.

This is causing problems on a Dell Venue Pro 11 7130 (i5-4300Y) it causes
the following messages to show up in dmesg:

[  131.014605] ACPI: Waking up from system sleep state S3
[  131.150271] acpi LNXPOWER:07: Turning OFF
[  131.150323] acpi LNXPOWER:06: Turning OFF
[  131.150911] acpi LNXPOWER:00: Turning OFF
[  131.169014] ACPI : EC: interrupt unblocked
[  131.181811] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  133.535728] pci_raw_set_power_state: 76 callbacks suppressed
[  133.535735] iwlwifi 0000:01:00.0: Refused to change power state,
               currently in D3
[  133.597672] PM: noirq resume of devices complete after 2428.891 msecs

Followed by a bunch of iwlwifi errors later on and the pcie device
dropping from the bus (acpiphp thinks it has been unplugged).

Disabling the turning off of unused power resources fixes this. Instead
of adding a quirk for this system, this commit fixes this by moving the
disabling of unused power resources to later in the resume sequence
when the iwlwifi card has been moved out of D3 so the ref_count for
its power resource no longer is 0.

This new behavior seems to match the intend of the original commit which
commit-msg says: "(... which means that no devices are going to need them
any time soon) and we should turn them off".

This also avoids power resources which we need when bringing devices out
of D3 from getting bounced off and then back on again.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull power management updates from Rafael Wysocki:
 "This time the majority of changes go to the cpufreq subsystem (and to
  the intel_pstate driver in particular) and there are some updates in
  the generic power domains framework, cpuidle, tools and a couple of
  other places.

  One thing worth mentioning is that the intel_pstate's sysfs interface
  has been reworked to be more consistent with the general expectations
  of the cpufreq core and less confusing, hopefully for the better.
  Also, we have a new cpufreq driver for Tegra186 and new hardware
  support in intel_pstata and the Mediatek cpufreq driver.

  Apart from that, the AnalyzeSuspend utility for system suspend
  profiling gets a companion called AnalyzeBoot for the analogous
  profiling of system boot and they both go into one place under
  tools/power/pm-graph/.

  The rest is mostly fixes, cleanups and code reorganization.

  Specifics:

   - Rework the intel_pstate driver's sysfs interface to make it more
     straightforward and more intuitive (Rafael Wysocki).

   - Make intel_pstate support all processors which advertise HWP
     (hardware-managed P-states) to the kernel in all operation modes
     and make it use the load-based P-state selection algorithm on a
     wider range of systems in the active mode (Rafael Wysocki).

   - Add cpufreq driver for Tegra186 (Mikko Perttunen).

   - Add support for Gemini Lake SoCs to intel_pstate (David Box).

   - Add support for MT8176 and MT817x to the Mediatek cpufreq driver
     and clean up that driver a bit (Daniel Kurtz).

   - Clean up intel_pstate and optimize it slightly (Rafael Wysocki).

   - Update the schedutil cpufreq governor, mostly to fix a couple of
     issues with it related to specific workloads, and rework its sysfs
     tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).

   - Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
     (Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
     YuanTian Tang).

   - Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
     Uytterhoeven).

   - Add support for "always on" power domains to the genpd (generic
     power domains) framework and clean up that code somewhat (Ulf
     Hansson, Lina Iyer, Viresh Kumar).

   - Fix minor issues in the powernv cpuidle driver and clean it up
     (Anton Blanchard, Gautham Shenoy).

   - Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add
     an analogous boot-profiling utility called AnalyzeBoot to it (Todd
     Brandt).

   - Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
     Scaling) driver (David Wu).

   - Fix minor issues in the cpuidle core, the intel_pstate_tracer
     utility, the devfreq framework and the PM core documentation
     (Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski)"

* tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
  PM / runtime: Document autosuspend-helper side effects
  PM / runtime: Fix autosuspend documentation
  tools: power: pm-graph: Package makefile and man pages
  tools: power: pm-graph: AnalyzeBoot v2.0
  tools: power: pm-graph: AnalyzeSuspend v4.6
  cpufreq: Add Tegra186 cpufreq driver
  cpufreq: imx6q: Fix error handling code
  cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
  cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
  cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
  cpuidle: powernv: Don't continually set thread priority in snooze_loop()
  cpuidle: powernv: Don't bounce between low and very low thread priority
  cpuidle: cpuidle-cps: remove unused variable
  tools/power/x86/intel_pstate_tracer: Adjust directory ownership
  cpufreq: schedutil: Use policy-dependent transition delays
  cpufreq: schedutil: Reduce frequencies slower
  PM / devfreq: Move struct devfreq_governor to devfreq directory
  PM / Domains: Ignore domain-idle-states that are not compatible
  cpufreq: intel_pstate: Add support for Gemini Lake
  powernv-cpuidle: Validate DT property array size
  ...

Pull cgroup updates from Tejun Heo:
 "Nothing major. Two notable fixes are Li's second stab at fixing the
  long-standing race condition in the mount path and suppression of
  spurious warning from cgroup_get(). All other changes are trivial"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: mark cgroup_get() with __maybe_unused
  cgroup: avoid attaching a cgroup root to two different superblocks, take 2
  cgroup: fix spurious warnings on cgroup_is_dead() from cgroup_sk_alloc()
  cgroup: move cgroup_subsys_state parent field for cache locality
  cpuset: Remove cpuset_update_active_cpus()'s parameter.
  cgroup: switch to BUG_ON()
  cgroup: drop duplicate header nsproxy.h
  kernel: convert css_set.refcount from atomic_t to refcount_t
  kernel: convert cgroup_namespace.count from atomic_t to refcount_t

Pull workqueue update from Tejun Heo:
 "One trivial patch to use setup_deferrable_timer() instead of
  open-coding the initialization"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: use setup_deferrable_timer

Pull libata updates from Tejun Heo:
 "The biggest core change is removal of SCT WRITE SAME support, which
  never worked properly.

  Other than that, trivial updates in core code and specific embedded
  driver updates"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: remove SCT WRITE SAME support
  libata: reject passthrough WRITE SAME requests
  dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller
  ata: ahci: add support for DaVinci DM816 SATA controller
  pata: remove the at91 driver
  libata: make ata_sg_clean static over again
  libata: use setup_deferrable_timer
  ata: allow subsystem to be used on m32r and s390 archs
  Delete redundant return value check of platform_get_resource()
  ata: constify of_device_id structures

Pull LED updates from Jacek Anaszewski:
 "New drivers:

   - add LED support for MT6323 PMIC

   - add LED support for Motorola CPCAP PMIC

  New features and improvements:

   - add LED trigger for all CPUs aggregated which is useful on tiny
     boards with more CPU cores than LED pins

   - add OF variants of LED registering functions as a preparation for
     adding generic support for Device Tree parsing

   - dell-led improvements and cleanups, followed by moving it to the
     x86 platform driver subsystem which is a more appropriate place for
     it

   - extend pca9532 Device Tree support by adding the LEDs
     'default-state' property

   - extend pca963x Device Tree support by adding nxp,inverted-out
     property for inverting the polarity of the output

   - remove ACPI support for lp3952 since it relied on a non-official
     ACPI IDs"

* tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca9532: Extend pca9532 device tree support
  leds: cpcap: new driver
  mfd: cpcap: Add missing include dependencies
  leds: lp3952: Use 'if (ret)' pattern
  leds: lp3952: Remove ACPI support for lp3952
  leds: mt6323: Fix an off by one bug in probe
  dt-bindings: leds: Add document bindings for leds-mt6323
  leds: Add LED support for MT6323 PMIC
  leds: gpio: use OF variant of LED registering function
  leds: core: add OF variants of LED registering functions
  platform/x86: dell-wmi-led: fix coding style issues
  dell-led: move driver to drivers/platform/x86/dell-wmi-led.c
  dell-led: remove code related to mic mute LED
  platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c
  ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func
  ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set()
  dell-led: remove GUID check from dell_micmute_led_set()
  leds/trigger/cpu: Add LED trigger for all CPUs aggregated

Pull mailbox updates from Jassi Brar:

 - new driver for Broadcom FlexRM controller

 - constify data structures of callback functions in some drivers

 - a few bug fixes uncovered by multi-threaded use of mailbox channels
   in blocking mode

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: handle empty message in tx_tick
  mailbox: skip complete wait event if timer expired
  mailbox: always wait in mbox_send_message for blocking Tx mode
  mailbox: Remove depends on COMPILE_TEST for BCM_FLEXRM_MBOX
  mailbox: check ->last_tx_done for NULL in case of timer-based polling
  dt-bindings: Add DT bindings info for FlexRM ring manager
  mailbox: Add driver for Broadcom FlexRM ring manager
  dt-bindings: mailbox: Update doc with NSP PDC/mailbox support
  mailbox: bcm-pdc: Add Northstar Plus support to PDC driver
  mailbox: constify mbox_chan_ops structures

Pull IPMI updates from Corey Minyard:
 "A few fixes of things in the IPMI area, the watchdog would have issues
  at panic time cause by a recently introduced change, a problem with
  device numbering, one possible panic in the I2C driver (destined for
  stable).

  Nothing earth-shattering, but some things that need to go in"

* tag 'for-linux-4.12' of git://github.com/cminyard/linux-ipmi:
  ipmi/watchdog: fix wdog hang on panic waiting for ipmi response
  ipmi_si: use smi_num for init_name
  ipmi: bt-bmc: Add ast2500 compatible string
  ACPI / IPMI: change warning to debug on timeout
  ACPI / IPMI: allow ACPI_IPMI with IPMI_SSIF
  ipmi_ssif: use setup_timer
  ipmi: Fix kernel panic at ipmi_ssif_thread()

Pull HSI fix from Sebastian Reichel:
 "Fix double free fix in ssi-protocol"

* tag 'hsi-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: ssi_protocol: double free in ssip_pn_xmit()

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - gemini-poweroff
   - cpcap-charger (for Motorola Droid 4)
   - battery-lego-ev3 (for LEGO Mindstorms EV3)

  New chip/feature support:
   - bq24190-charger: add runtime PM support
   - bq24190-charger: add bq24192i support
   - register masking for syscon-poweroff

  ... and misc small fixes & cleanups

* tag 'for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: bq24190_charger: Use new extcon_register_notifier_all()
  power: supply: bq24190_charger: Longer delay while polling reset flag
  power: supply: bq24190_charger: Uniform pm_runtime_get() failure handling
  power: supply: bq24190_charger: Clean up extcon code
  power: supply: bq24190_charger: Limit over/under voltage fault logging
  power: supply: New driver for LEGO MINDSTORMS EV3 battery
  dt-bindings: power: supply: New bindings for LEGO MINDSTORMS EV3 battery
  power: supply: tps65217: remove debug messages for function calls
  power: supply: ltc2941-battery-gauge: Add OF device ID table
  power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding
  power: supply: charger-manager: simplify return statements
  power: supply: lp8788: prevent out of bounds array access
  power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
  power: supply: bq24190_charger: Add support for bq24192i
  power: supply: bq24190_charger: Use i2c-core irq-mapping code
  power: bq24190_charger: mark PM functions as __maybe_unused
  power: supply: sbs-charger: simplified bool function
  power: supply: ab8500: Replaced spaces with tabs in indent
  power: supply: bq25890: Use gpiod_get()
  ...

a590b90d ("cgroup: fix spurious warnings on cgroup_is_dead() from
cgroup_sk_alloc()") converted most cgroup_get() usages to
cgroup_get_live() leaving cgroup_sk_alloc() the sole user of
cgroup_get().  When !CONFIG_SOCK_CGROUP_DATA, this ends up triggering
unused warning for cgroup_get().

Silence the warning by adding __maybe_unused to cgroup_get().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20170501145340.17e8ef86@canb.auug.org.auSigned-off-by: Tejun Heo <tj@kernel.org>

Merge tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - removed twl4030-madc driver

 - added ASPEED PWM/fan driver

 - various minor improvements and fixes in several drivers

* tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (twl4030-madc) drop driver
  hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macro
  hwmon: (adt7475) set start bit in probe
  hwmon: (ina209) Handled signed registers
  hwmon: (lm87) Add OF device ID table
  hwmon: (lm87) Remove unused I2C devices driver_data
  drivers: hwmon: Support for ASPEED PWM/Fan tach
  Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver
  hwmon: (lm87) Allow channel data to be set from dts file
  Documentation: dtb: lm87: Add hwmon binding documentation
  hwmon: (ads7828) Accept optional parameters from device tree
  hwmon: (dell-smm) Add Dell XPS 15 9560 into DMI list
  hwmon: Constify str parameter of hwmon_ops->read_string
  dt: Add vendor prefix for Sensirion
  hwmon: (tmp421) Add OF device ID table
  hwmon: (tmp103) Add OF device ID table
  hwmon: (tmp102) Add OF device ID table
  hwmon: (stts751) Add OF device ID table
  hwmon: (ucd9200) Add OF device ID table
  hwmon: (ucd9000) Add OF device ID table
  ...

Pull EDAC updates from Borislav Petkov:

 - an EDAC driver for Cavium ThunderX RAS IP (Sergey Temerkhanov)

 - removal of DRAM error reporting through PCI SERR NMI (Borislav
   Petkov)

 - misc small fixes (Jan Glauber, Thor Thayer)

* tag 'edac_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ghes: Do not enable it by default
  EDAC: Rename report status accessors
  EDAC: Delete edac_stub.c
  EDAC: Update Kconfig help text
  EDAC: Remove EDAC_MM_EDAC
  EDAC: Issue tracepoint only when it is defined
  ACPI/extlog: Add EDAC dependency
  EDAC: Move edac_op_state to edac_mc.c
  EDAC: Remove edac_err_assert
  EDAC: Get rid of edac_handlers
  x86/nmi, EDAC: Get rid of DRAM error reporting thru PCI SERR NMI
  EDAC, highbank: Align Makefile directives
  EDAC, thunderx: Remove unused code
  EDAC, thunderx: Change LMC index calculation
  EDAC, altera: Fix peripheral warnings for Cyclone5
  EDAC, thunderx: Fix L2C MCI interrupt disable
  EDAC, thunderx: Add Cavium ThunderX EDAC driver

Pull second round of block layer updates from Jens Axboe:

 - Further fixups to the NVMe APST code, from Andy.

 - Various fixes for (mostly) nvme-fc, from Christoph and James.

 - NVMe scsi fixes from Jon and Christoph.

* 'for-4.12/post-merge' of git://git.kernel.dk/linux-block: (39 commits)
  nvme-scsi: remove nvme_trans_security_protocol
  nvme-lightnvm: add missing endianess conversion in nvme_nvm_end_io
  nvme-scsi: Consider LBA format in IO splitting calculation
  nvme-fc: avoid memory corruption caused by calling nvmf_free_options() twice
  lpfc: Fix memory corruption of the lpfc_ncmd->list pointers
  nvme: Add nvme_core.force_apst to ignore the NO_APST quirk
  nvme: Display raw APST configuration via DYNAMIC_DEBUG
  nvme: Fix APST comment
  lpfc revison 11.2.0.12
  Fix Express lane queue creation.
  Update ABORT processing for NVMET.
  Fix implicit logo and RSCN handling for NVMET
  Add Fabric assigned WWN support.
  Fix max_sgl_segments settings for NVME / NVMET
  Fix crash after issuing lip reset
  Fix driver load issues when MRQ=8
  Remove hba lock from NVMET issue WQE.
  Fix nvme initiator handling when not enabled.
  Fix driver usage of 128B WQEs when WQ_CREATE is V1.
  Fix driver unload/reload operation.
  ...

Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..

This driver is no longer needed:

 * It has no mainline users
 * It has no DT support and OMAP is DT only
 * iio-hwmon can be used for madc, which also works with DT
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull x86 fixes from Thomas Gleixner:
 "The final fixes for 4.11:

   - prevent a triple fault with function graph tracing triggered via
     suspend to ram

   - prevent optimizing for size when function graph tracing is enabled
     and the compiler does not support -mfentry

   - prevent mwaitx() being called with a zero timeout as mwaitx() might
     never return. Observed on the new Ryzen CPUs"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Prevent timer value 0 for MWAITX
  x86/build: convert function graph '-Os' error to warning
  ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram

Pull scheduler fix from Thomas Gleixner:
 "A single fix for a cputime accounting regression which got introduced
  in the 4.11 cycle"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Fix ksoftirqd cputime accounting regression

Newer hardware has uncovered a bug in the software implementation of
using MWAITX for the delay function. A value of 0 for the timer is meant
to indicate that a timeout will not be used to exit MWAITX. On newer
hardware this can result in MWAITX never returning, resulting in NMI
soft lockup messages being printed. On older hardware, some of the other
conditions under which MWAITX can exit masked this issue. The AMD APM
does not currently document this and will be updated.

Please refer to http://marc.info/?l=kvm&m=148950623231140 for
information regarding NMI soft lockup messages on an AMD Ryzen 1800X.
This has been root-caused as a 0 passed to MWAITX causing it to wait
indefinitely.

This change has the added benefit of avoiding the unnecessary setup of
MONITORX/MWAITX when the delay value is zero.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull iov iter fix from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a braino in ITER_PIPE iov_iter_revert()

Fixes: 27c0e374Tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull clk fix from Stephen Boyd:
 "One odd config build fix for a recent Allwinner clock driver change
  that got merged. The common code called code in another file that
  wasn't always built. This just forces it on so people don't run into
  this bad configuration"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: always select CCU_GATE

This was already disabled a while ago because it caused I/O errors,
and it's severly getting into the way of the discard / write zeroes
rework.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The WRITE SAME to TRIM translation rewrites the DATA OUT buffer.  While
the SCSI code accomodates for this by passing a read-writable buffer
userspace applications don't cater for this behavior.  In fact it can
be used to rewrite e.g. a readonly file through mmap and should be
considered as a security fix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Commit bfb0b80d ("cgroup: avoid attaching a cgroup root to two
different superblocks") is broken.  Now we try to fix the race by
delaying the initialization of cgroup root refcnt until a superblock
has been allocated.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Tested-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The power table addresses should be contiguous, but there was a hole
where 0x34 was missing. On most devices this is not a problem as
addresses above 0x34 are used for the BUC# convertors which are not
used in the DSDTs I've access to but after the BUC# convertors
there is a field named GPI1 in the DSTDs, which does get used in some
cases and ended up turning BUC6 on and off due to the wrong addresses,
resulting in turning the entire device off (or causing it to reboot).

Removing the hole in the addresses fixes this, fixing one of my
Bay Trail tablets turning off while booting the mainline kernel.

While at it add comments with the field names used in the DSDTs to
make it easier to compare the register and bits used at each address
with the datasheet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

On Bay Trail systems with a Crystal Cove PMIC the Crystal Cove's PWM is
used to control the backlight brightness. On systems without one, the
Crystal Cove SoC's PWM is used and we need to call pwm_add_table() so
that the i915 driver can find the pwm for controlling the backlight.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* acpi-power:
  power: supply: axp288_charger: Only wait for INT3496 device if present
  ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver
  ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver
  ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors
  ACPI / utils: Add new acpi_dev_present helper

* acpi-blacklist:
  ACPI / blacklist: add _REV quirk for Dell Inspiron 7537

* acpi-video:
  ACPI / video: add comments about subtle cases
  ACPI / video: get rid of magic numbers and use enum instead

* acpi-doc:
  ACPI / doc: linuxized-acpica.txt: fix typos

* acpi-processor:
  ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add()

* acpi-cppc:
  ACPI / CPPC: add sysfs entries for CPPC perf capabilities
  ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps()

* acpi-pmic:
  ACPI / PMIC: Stop xpower OPRegion handler relying on IIO
  ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC

* acpi-scan:
  ACPI / scan: Avoid enumerating devices more than once
  ACPI / scan: Apply default enumeration to devices with ACPI drivers
  ACPI / scan: Drop support for force_remove

* acpi-tables:
  ACPI / tables: Drop acpi_parse_entries() which is not used

* acpi-platform:
  ACPI / platform: Update platform device NUMA node based on _PXM method

* pm-tools:
  tools: power: pm-graph: Package makefile and man pages
  tools: power: pm-graph: AnalyzeBoot v2.0
  tools: power: pm-graph: AnalyzeSuspend v4.6
  tools/power/x86/intel_pstate_tracer: Adjust directory ownership

* pm-cpuidle:
  cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
  cpuidle: powernv: Don't continually set thread priority in snooze_loop()
  cpuidle: powernv: Don't bounce between low and very low thread priority
  cpuidle: cpuidle-cps: remove unused variable
  powernv-cpuidle: Validate DT property array size

* pm-core:
  PM / runtime: Document autosuspend-helper side effects
  PM / runtime: Fix autosuspend documentation

* pm-domains:
  PM / Domains: Ignore domain-idle-states that are not compatible
  PM / Domains: Don't warn about IRQ safe device for an always on PM domain
  PM / Domains: Respect errors from genpd's ->power_off() callback
  PM / Domains: Enable users of genpd to specify always on PM domains
  PM / Domains: Clean up code validating genpd's status
  PM / Domain: remove conditional from error case

* pm-avs:
  PM / AVS: rockchip-io: add io selectors and supplies for rk3328

* pm-devfreq:
  PM / devfreq: Move struct devfreq_governor to devfreq directory

* pm-cpufreq: (37 commits)
  cpufreq: Add Tegra186 cpufreq driver
  cpufreq: imx6q: Fix error handling code
  cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
  cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
  cpufreq: schedutil: Use policy-dependent transition delays
  cpufreq: schedutil: Reduce frequencies slower
  cpufreq: intel_pstate: Add support for Gemini Lake
  cpufreq: intel_pstate: Eliminate intel_pstate_get_min_max()
  cpufreq: intel_pstate: Do not walk policy->cpus
  cpufreq: intel_pstate: Introduce pid_in_use()
  cpufreq: intel_pstate: Drop struct cpu_defaults
  cpufreq: intel_pstate: Move cpu_defaults definitions
  cpufreq: intel_pstate: Add update_util callback to pstate_funcs
  cpufreq: intel_pstate: Use different utilization update callbacks
  cpufreq: intel_pstate: Modify check in intel_pstate_update_status()
  cpufreq: intel_pstate: Drop driver_registered variable
  cpufreq: intel_pstate: Skip unnecessary PID resets on init
  cpufreq: intel_pstate: Set HWP sampling interval once
  cpufreq: intel_pstate: Clean up intel_pstate_busy_pid_reset()
  cpufreq: intel_pstate: Fold intel_pstate_reset_all_pid() into the caller
  ...

Pull networking fixes from David Miller:
 "Just a couple more stragglers, I really hope this is it.

  1) Don't let frags slip down into the GRO segmentation handlers, from
     Steffen Klassert.

  2) Truesize under-estimation triggers warnings in TCP over loopback
     with socket filters, 2 part fix from Eric Dumazet.

  3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal,
     from Paolo Abeni.

  4) If we flush the XFRM policy after garbage collection, it doesn't
     work because stray entries can be created afterwards. Fix from Xin
     Long.

  5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan.

  6) Fix GRO regression with IPSEC when netfilter is disabled, from
     Sabrina Dubroca.

  7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: hso: register netdev later to avoid a race condition
  net: adjust skb->truesize in ___pskb_trim()
  tcp: do not underestimate skb->truesize in tcp_trim_head()
  bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal
  ipv4: Don't pass IP fragments to upper layer GRO handlers.
  cpsw/netcp: refine cpts dependency
  tipc: close the connection if protocol messages contain errors
  tipc: improve error validations for sockets in CONNECTING state
  tipc: Fix missing connection request handling
  xfrm: fix GRO for !CONFIG_NETFILTER
  xfrm: do the garbage collection after flushing policy