- 14 Jan, 2023 7 commits
-
-
Matthieu Baerts authored
MPTCP protocol supports having subflows in both IPv4 and IPv6. In Linux, it is possible to have that if the MPTCP socket has been created with AF_INET6 family without the IPV6_V6ONLY option. Here, a new IPv4 subflow is being added to the initial IPv6 connection, then being removed using Netlink commands. Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
If an MPTCP socket has been created with AF_INET6 and the IPV6_V6ONLY option has been set, the userspace PM would allow creating subflows using IPv4 addresses, e.g. mapped in v6. The kernel side of userspace PM will also accept creating subflows with local and remote addresses having different families. Depending on the subflow socket's family, different behaviours are expected: - If AF_INET is forced with a v6 address, the kernel will take the last byte of the IP and try to connect to that: a new subflow is created but to a non expected address. - If AF_INET6 is forced with a v4 address, the kernel will try to connect to a v4 address (v4-mapped-v6). A -EBADF error from the connect() part is then expected. It is then required to check the given families can be accepted. This is done by using a new helper for addresses family matching, taking care of IPv4 vs IPv4-mapped-IPv6 addresses. This helper will be re-used later by the in-kernel path-manager to use mixed IPv4 and IPv6 addresses. While at it, a clear error message is now reported if there are some conflicts with the families that have been passed by the userspace. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Let the caller specify the to-be-created subflow family. For a given MPTCP socket created with the AF_INET6 family, the current userspace PM can already ask the kernel to create subflows in v4 and v6. If "plain" IPv4 addresses are passed to the kernel, they are automatically mapped in v6 addresses "by accident". This can be problematic because the userspace will need to pass different addresses, now the v4-mapped-v6 addresses to destroy this new subflow. On the other hand, if the MPTCP socket has been created with the AF_INET family, the command to create a subflow in v6 will be accepted but the result will not be the one as expected as new subflow will be created in IPv4 using part of the v6 addresses passed to the kernel: not creating the expected subflow then. No functional change intended for the in-kernel PM where an explicit enforcement is currently in place. This arbitrary enforcement will be leveraged by other patches in a future version. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Clément Léger authored
Since the "ethernet-ports" node is retrieved using device_get_named_child_node(), it should be release after using it. Add missing fwnode_handle_put() and move the code that retrieved the node from device-tree to avoid complicated handling in case of error. Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380c ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Esina Ekaterina authored
If uhdlc_priv_tsa != 1 then utdm is not initialized. And if ret != NULL then goto undo_uhdlc_init, where utdm is dereferenced. Same if dev == NULL. Found by Astra Linux on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8d68100a ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm") Signed-off-by: Esina Ekaterina <eesina@astralinux.ru> Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jisoo Jang authored
Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301) Fixes: 3536da06 ("NFC: llcp: Clean local timers and works when removing a device") Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Link: https://lore.kernel.org/r/20230111131914.3338838-1-jisoo.jang@yonsei.ac.krSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 13 Jan, 2023 7 commits
-
-
Sudheer Mogilappagari authored
Current code for RSS_GET ethtool command includes netlink attributes in reply message to user space even if they are null. Added checks to include netlink attribute in reply message only if a value is received from driver. Drivers might return null for RSS indirection table or hash key. Instead of including attributes with empty value in the reply message, add netlink attribute only if there is content. Fixes: 7112a046 ("ethtool: add netlink based get rss support") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/r/20230111235607.85509-1-sudheer.mogilappagari@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Howells authored
Fix rxrpc_connect_call() to return -ENOMEM rather than 0 if it fails to look up a peer. This generated a smatch warning: net/rxrpc/call_object.c:303 rxrpc_connect_call() warn: missing error code 'ret' I think this also fixes a syzbot-found bug: rxrpc: Assertion failed - 1(0x1) == 11(0xb) is false ------------[ cut here ]------------ kernel BUG at net/rxrpc/call_object.c:645! where the call being put is in the wrong state - as would be the case if we failed to clear up correctly after the error in rxrpc_connect_call(). Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Reported-and-tested-by: syzbot+4bb6356bb29d6299360e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/202301111153.9eZRYLf1-lkp@intel.com/Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/2438405.1673460435@warthog.procyon.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Raju Rangoju says: ==================== amd-xgbe: PFC and KR-Training fixes This patch series fixes the issues in kr-training and pfc 0001 - There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. Update the driver to use the TFCR based on the reported version of the hardware. 0002 - AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Add the necessary changes to fix kr-taining. ==================== Link: https://lore.kernel.org/r/20230111172852.1875384-1-Raju.Rangoju@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Raju Rangoju authored
AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Driver has to wait upto 500ms or until the KR training is completed before restarting AN cycle. Fixes: 7c12aa08 ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Raju Rangoju authored
There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. The older revisions of hardware used to have single register per queue. Whereas, the newer revision of hardware (from ver 30H onwards) have one register per priority. Update the driver to use the TFCR based on the reported version of the hardware. Fixes: c5aa9e3b ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Some fixes, stack only for now: * iTXQ conversion fixes, various bugs reported * properly reset multiple BSSID settings * fix for a link_sta crash * fix for AP VLAN checks * fix for MLO address translation * tag 'wireless-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix MLO + AP_VLAN check mac80211: Fix MLO address translation for multiple bss case wifi: mac80211: reset multiple BSSID options in stop_ap() wifi: mac80211: Fix iTXQ AMPDU fragmentation handling wifi: mac80211: sdata can be NULL during AMPDU start wifi: mac80211: Proper mark iTXQs for resumption wifi: mac80211: fix initialization of rx->link and rx->link_sta ==================== Link: https://lore.kernel.org/r/20230112111941.82408-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from rxrpc. The rxrpc changes are noticeable large: to address a recent regression has been necessary completing the threaded refactor. Current release - regressions: - rxrpc: - only disconnect calls in the I/O thread - move client call connection to the I/O thread - fix incoming call setup race - eth: mlx5: - restore pkt rate policing support - fix memory leak on updating vport counters Previous releases - regressions: - gro: take care of DODGY packets - ipv6: deduct extension header length in rawv6_push_pending_frames - tipc: fix unexpected link reset due to discovery messages Previous releases - always broken: - sched: disallow noqueue for qdisc classes - eth: ice: fix potential memory leak in ice_gnss_tty_write() - eth: ixgbe: fix pci device refcount leak - eth: mlx5: - fix command stats access after free - fix macsec possible null dereference when updating MAC security entity (SecY)" * tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) r8152: add vendor/device ID pair for Microsoft Devkit net: stmmac: add aux timestamps fifo clearance wait bnxt: make sure we return pages to the pool net: hns3: fix wrong use of rss size during VF rss config ipv6: raw: Deduct extension header length in rawv6_push_pending_frames net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit() net: sched: disallow noqueue for qdisc classes iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak octeontx2-pf: Fix resource leakage in VF driver unbind selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure. selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns. selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad". net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) net/mlx5e: Fix macsec ssci attribute handling in offload path net/mlx5: E-switch, Coverity: overlapping copy net/mlx5e: Don't support encap rules with gbp option net/mlx5: Fix ptp max frequency adjustment range net/mlx5e: Fix memory leak on updating vport counters ...
-
- 12 Jan, 2023 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Add various missing READ_ONCE() to cmpxchg() loops prevent the compiler from potentially generating incorrect code. This includes a rather large change to the s390 specific hardware sampling code and its current use of cmpxchg_double(). Do the fix now to get it out of the way of Peter Zijlstra's cmpxchg128() work, and have something that can be backported. The added new code includes a private 128 bit cmpxchg variant which will be removed again after Peter's rework is available. Also note that this 128 bit cmpxchg variant is used to implement 128 bit READ_ONCE(), while strictly speaking it wouldn't be necessary, and _READ_ONCE() should also be sufficient; even though it isn't obvious for all converted locations that this is the case. Therefore use this implementation for for the sake of clarity and consistency for now. - Fix ipl report address handling to avoid kdump failures/hangs. - Fix misuse of #(el)if in kernel decompressor. - Define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36, caused by the recently changed discard behaviour. - Make sure _edata and _end symbols are always page aligned. - The current header guard DEBUG_H in one of the s390 specific header files is too generic and conflicts with the ath9k wireless driver. Add an _ASM_S390_ prefix to the guard to make it unique. - Update defconfigs. * tag 's390-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs KVM: s390: interrupt: use READ_ONCE() before cmpxchg() s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple() s390/cpum_sf: add READ_ONCE() semantics to compare and swap loops s390/kexec: fix ipl report address for kdump s390: fix -Wundef warning for CONFIG_KERNEL_ZSTD s390: define RUNTIME_DISCARD_EXIT to fix link error with GNU ld < 2.36 s390: expicitly align _edata and _end symbols on page boundary s390/debug: add _ASM_S390_ prefix to header guard
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer doc fixes from Ingo Molnar: - Fix various DocBook formatting errors in kernel/time/ that generated (justified) warnings during a kernel-doc build. * tag 'timers-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Fix various kernel-doc problems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf events hw enablement from Ingo Molnar: - More hardware-enablement for Intel Meteor Lake & Emerald Rapid systems: pure model ID enumeration additions that do not affect other systems. * tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Add Emerald Rapids perf/x86/msr: Add Emerald Rapids perf/x86/msr: Add Meteor Lake support perf/x86/cstate: Add Meteor Lake support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: - Fix scheduler frequency invariance bug related to overly long tickless periods triggering an integer overflow and disabling the feature. - Fix use-after-free bug in dup_user_cpus_ptr(). - Fix do_set_cpus_allowed() deadlock scenarios related to calling kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy' solution here - we looked at patches to free the structure after the pi_lock got dropped, but that looked quite a bit messier - and none of this is truly performance critical. We can revisit this if it's too lazy of a solution ... * tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Use kfree_rcu() in do_set_cpus_allowed() sched/core: Fix use-after-free bug in dup_user_cpus_ptr() sched/core: Fix arch_scale_freq_tick() on tickless systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: - Fix objtool to be more permissive with hand-written assembly that uses non-function symbols in executable sections. * tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Tolerate STT_NOTYPE symbols at end of section
-
Linus Torvalds authored
Merge tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc fixes from Paul McKenney: - The fd_set structure was incorrectly defined as arrays of u32 instead of long, which breaks BE64. Fix courtesy of Sven Schnelle. - S_ISxxx macros were incorrectly testing the bits after applying them instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh. - The mips code was randomly broken due to an unprotected "noreorder" directive in the _start code that could prevent the assembler from filling delayed slots. This in turn resulted in random other instructions being placed into those slots. Fix courtesy of Willy Tarreau. - The current nolibc header layout refrains from including files that are not explicitly included by the code using nolibc. Unfortunately, this causes build failures when such files contain definitions that are used (for example) by libgcc. Example definitions include raise() and memset(), which are called by some architectures, but only at certain optimization levels. Fix courtesy of Willy Tarreau. - gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction inside the memset() definition. The compiler replaced this construction with a call to... memset(). Userland cannot be forced to build with -ffreestanding, so an empty asm() statement was introduced into the loop the loop in order to prevent the compiler from making this unproductive transformation. Fix courtesy of Willy Tarreau. - Most of the O_* macros were wrong on RISCV because their octal values were coded as hexadecimal. This resulted in the getdents64() selftest failing. Fix courtesy of Willy Tarreau. This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and riscv, all at -O0, -Os and -O3. * tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/nolibc: fix the O_* fcntl/open macro definitions for riscv tools/nolibc: prevent gcc from making memset() loop over itself tools/nolibc: fix missing includes causing build issues at -O0 tools/nolibc: restore mips branch ordering in the _start block tools/nolibc: Fix S_ISxxx macros nolibc: fix fd_set type
-
Andre Przywara authored
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: - Fixes for long standing issues with accesses to spidev->spi during teardown in the spidev userspace driver. - Rename the newly added spi-cs-setup-ns DT property to be more in line with our other delay properties before it becomes ABI. - A few driver specific fixes. * tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: remove debug messages that access spidev->spi without locking spi: spidev: fix a race condition when accessing spidev->spi spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns spi: cadence: Fix busy cycles calculation spi: mediatek: Enable irq before the spi registration
-
Linus Torvalds authored
Merge tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small driver specific fixes, one of which I queued for 6.1 but didn't actually send out so has had *plenty* of testing in -next" * tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo regulator: da9211: Use irq handler when ready
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Miquel Raynal: - cfi: Allow building spi-intel standalone to avoid build issues - parsers: scpart: Fix __udivdi3 undefined on mips - parsers: tplink_safeloader: Fix potential memory leak during parsing - Update email of Tudor Ambarus * tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: MAINTAINERS: Update email of Tudor Ambarus mtd: cfi: allow building spi-intel standalone mtd: parsers: scpart: fix __udivdi3 undefined on mips mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Ten small fixes (less the one that cleaned up a reverted removal), nine in drivers of which the ufs one is the most critical. The single core patch is a minor speedup to error handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort() scsi: hisi_sas: Fix tag freeing for reserved tags scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0() scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile scsi: core: scsi_error: Do not queue pointless abort workqueue functions scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace scsi: mpi3mr: Remove usage of dma_get_required_mask() API scsi: mpt3sas: Remove usage of dma_get_required_mask() API
-
Noor Azura Ahmad Tarmizi authored
Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit (ATSFC) to clear. This is to ensure no residue fifo value is being read erroneously. Fixes: f4da5652 ("net: stmmac: Add support for external trigger timestamping") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-10 (ixgbe, igc, iavf) This series contains updates to ixgbe, igc, and iavf drivers. Yang Yingliang adds calls to pci_dev_put() for proper ref count tracking on ixgbe. Christopher adds setting of Toggle on Target Time bits for proper pulse per second (PPS) synchronization for igc. Daniil Tatianin fixes, likely, copy/paste issue that misreported destination instead of source for IP mask for iavf error. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak ==================== Link: https://lore.kernel.org/r/20230110223825.648544-1-anthony.l.nguyen@intel.comReviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Before the commit under Fixes the page would have been released from the pool before the napi_alloc_skb() call, so normal page freeing was fine (released page == no longer in the pool). After the change we just mark the page for recycling so it's still in the pool if the skb alloc fails, we need to recycle. Same commit added the same bug in the new bnxt_rx_multi_page_skb(). Fixes: 1dc4c557 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jie Wang authored
Currently, it used old rss size to get current tc mode. As a result, the rss size is updated, but the tc mode is still configured based on the old rss size. So this patch fixes it by using the new rss size in both process. Fixes: 93969dc1 ("net: hns3: refactor VF rss init APIs with new common rss init APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 11 Jan, 2023 10 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.2-2-2023-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Make 'perf kmem' cope with the removal of some kmem:kmem_cache_alloc_node and kmem:kmalloc_node in the 11e9734b ("mm/slab_common: unify NUMA and UMA version of tracepoints") commit, making sure it works with Linux >= 6.2 as well as with older kernels where those tracepoints are present. - Also make it handle the new "node" kmem:kmalloc and kmem:kmem_cache_alloc tracepoint field introduced in that same commit. - Fix hardware tracing PMU address filter duplicate symbol selection, that was preventing to match with static functions with the same name present in different object files. - Fix regression on what linux/types.h file gets used to build the "BPF prologue" 'perf test' entry, the system one lacks the fmode_t definition used in this test, so provide that type in the test itself. - Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1. If the user asks for linking with the libbpf package provided by the distro, then it has to be >= 0.8.0. Using the libbpf supplied with the kernel would be a fallback in that case. - Fix the build when libbpf isn't available or explicitly disabled via NO_LIBBPF=1. - Don't try to install libtraceevent plugins as its not anymore in the kernel sources and will thus always fail. * tag 'perf-tools-fixes-for-v6.2-2-2023-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf auxtrace: Fix address filter duplicate symbol selection perf bpf: Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1 perf build: Fix build error when NO_LIBBPF=1 perf tools: Don't install libtraceevent plugins as its not anymore in the kernel sources perf kmem: Support field "node" in evsel__process_alloc_event() coping with recent tracepoint restructuring perf kmem: Support legacy tracepoints perf build: Properly guard libbpf includes perf tests bpf prologue: Fix bpf-script-test-prologue test compile issue with clang
-
Heiko Carstens authored
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Adrian Hunter authored
When a match has been made to the nth duplicate symbol, return success not error. Example: Before: $ cat file.c cat: file.c: No such file or directory $ cat file1.c #include <stdio.h> static void func(void) { printf("First func\n"); } void other(void); int main() { func(); other(); return 0; } $ cat file2.c #include <stdio.h> static void func(void) { printf("Second func\n"); } void other(void) { func(); } $ gcc -Wall -Wextra -o test file1.c file2.c $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test Multiple symbols with name 'func' #1 0x1149 l func which is near main #2 0x1179 l func which is near other Disambiguate symbol name by inserting #n after the name e.g. func #2 Or select a global symbol by inserting #0 or #g or #G Failed to parse address filter: 'filter func @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test Failed to parse address filter: 'filter func #2 @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. After: $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test First func Second func [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns 1231062.526977619: tr strt 0 [unknown] => 558495708179 func 1231062.526977619: tr end call 558495708188 func => 558495708050 _init 1231062.526979286: tr strt 0 [unknown] => 55849570818d func 1231062.526979286: tr end return 55849570818f func => 55849570819d other Fixes: 1b36c03e ("perf record: Add support for using symbols in address filters") Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Heiko Carstens authored
Use READ_ONCE() before cmpxchg() to prevent that the compiler generates code that fetches the to be compared old value several times from memory. Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.comSigned-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Heiko Carstens authored
Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only dereferenced once by using READ_ONCE(). Otherwise the compiler could generate incorrect code. Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Heiko Carstens authored
The current cmpxchg_double() loops within the perf hw sampling code do not have READ_ONCE() semantics to read the old value from memory. This allows the compiler to generate code which reads the "old" value several times from memory, which again allows for inconsistencies. For example: /* Reset trailer (using compare-double-and-swap) */ do { te_flags = te->flags & ~SDB_TE_BUFFER_FULL_MASK; te_flags |= SDB_TE_ALERT_REQ_MASK; } while (!cmpxchg_double(&te->flags, &te->overflow, te->flags, te->overflow, te_flags, 0ULL)); The compiler could generate code where te->flags used within the cmpxchg_double() call may be refetched from memory and which is not necessarily identical to the previous read version which was used to generate te_flags. Which in turn means that an incorrect update could happen. Fix this by adding READ_ONCE() semantics to all cmpxchg_double() loops. Given that READ_ONCE() cannot generate code on s390 which atomically reads 16 bytes, use a private compare-and-swap-double implementation to achieve that. Also replace cmpxchg_double() with the private implementation to be able to re-use the old value within the loops. As a side effect this converts the whole code to only use bit fields to read and modify bits within the hws trailer header. Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/linux-s390/Y71QJBhNTIatvxUT@osiris/T/#ma14e2a5f7aa8ed4b94b6f9576799b3ad9c60f333Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-
Mark Brown authored
The newly added spi-cs-setup-ns doesn't really fit with the existing property names for delays, rename it so that it does before it makes it into a release and becomes ABI.
-
Bartosz Golaszewski authored
The two debug messages in spidev_open() dereference spidev->spi without taking the lock and without checking if it's not null. This can lead to a crash. Drop the messages as they're not needed - the user-space will get informed about ENOMEM with the syscall return value. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230106100719.196243-2-brgl@bgdev.plSigned-off-by: Mark Brown <broonie@kernel.org>
-
Bartosz Golaszewski authored
There's a spinlock in place that is taken in file_operations callbacks whenever we check if spidev->spi is still alive (not null). It's also taken when spidev->spi is set to NULL in remove(). This however doesn't protect the code against driver unbind event while one of the syscalls is still in progress. To that end we need a lock taken continuously as long as we may still access spidev->spi. As both the file ops and the remove callback are never called from interrupt context, we can replace the spinlock with a mutex. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230106100719.196243-1-brgl@bgdev.plSigned-off-by: Mark Brown <broonie@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-fixes-2023-01-09
-