- 16 Jul, 2014 1 commit
-
-
Oleg Nesterov authored
Remove task_struct->pi_top_task. The only user, rt_mutex_setprio(), can use a local. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daeseok Youn <daeseok.youn@gmail.com> Cc: Dario Faggioli <raistlin@linux.it> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Dempsky <mdempsky@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20140606165206.GB29465@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 05 Jul, 2014 17 commits
-
-
Kirill Tkhai authored
1) Iterate thru all of threads in the system. Check for all threads, not only for group leaders. 2) Check for p->on_rq instead of p->state and cputime. Preempted task in !TASK_RUNNING state OR just created task may be queued, that we want to be reported too. 3) Use read_lock() instead of write_lock(). This function does not change any structures, and read_lock() is enough. Signed-off-by:
Kirill Tkhai <ktkhai@parallels.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Segall <bsegall@google.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Konstantin Khorenko <khorenko@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael wang <wangyun@linux.vnet.ibm.com> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Turner <pjt@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Todd E Brandt <todd.e.brandt@linux.intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Signed-off-by:
-
Kirill Tkhai authored
Make rt_rq available for pick_next_task(). Otherwise, their tasks stay prisoned long time till dead cpu becomes alive again. Reviewed-by:
-
Kirill Tkhai authored
We kill rq->rd on the CPU_DOWN_PREPARE stage: cpuset_cpu_inactive -> cpuset_update_active_cpus -> partition_sched_domains -> -> cpu_attach_domain -> rq_attach_root -> set_rq_offline This unthrottles all throttled cfs_rqs. But the cpu is still able to call schedule() till take_cpu_down->__cpu_disable() is called from stop_machine. This case the tasks from just unthrottled cfs_rqs are pickable in a standard scheduler way, and they are picked by dying cpu. The cfs_rqs becomes throttled again, and migrate_tasks() in migration_call skips their tasks (one more unthrottle in migrate_tasks()->CPU_DYING does not happen, because rq->rd is already NULL). Patch sets runtime_enabled to zero. This guarantees, the runtime is not accounted, and the cfs_rqs won't exceed given cfs_rq->runtime_remaining = 1, and tasks will be pickable in migrate_tasks(). runtime_enabled is recalculated again when rq becomes online again. Ben Segall also noticed, we always enable runtime in tg_set_cfs_bandwidth(). Actually, we should do that for online cpus only. To prevent races with unthrottle_offline_cfs_rqs() we take get_online_cpus() lock. Reviewed-by:
Ben Segall <bsegall@google.com> Reviewed-by:
-
Rik van Riel authored
Reading through the scan period code and comment, it appears the intent was to slow down NUMA scanning when a majority of accesses are on the local node, specifically a local:remote ratio of 3:1. However, the code actually tests local / (local + remote), and the actual cut-off point was around 30% local accesses, well before a task has actually converged on a node. Changing the threshold to 7 means scanning slows down when a task has around 70% of its accesses local, which appears to match the intent of the code more closely. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: mgorman@suse.de Cc: chegu_vinod@hp.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rik van Riel authored
Fix up the best node setting in task_numa_migrate() to deal with a task in a pseudo-interleaved NUMA group, which is already running in the best location. Set the task's preferred nid to the current nid, so task migration is not retried at a high rate. Signed-off-by:
-
Rik van Riel authored
Running "perf bench numa mem -0 -m -P 1000 -p 8 -t 20" on a 4 node system results in 160 runnable threads on a system with 80 CPU threads. Once a process has nearly converged, with 39 threads on one node and 1 thread on another node, the remaining thread will be unable to migrate to its preferred node through a task swap. However, a simple task move would make the workload converge, witout causing an imbalance. Test for this unlikely occurrence, and attempt a task move to the preferred nid when it happens. # Running main, "perf bench numa mem -p 8 -t 20 -0 -m -P 1000" ### # 160 tasks will execute (on 4 nodes, 80 CPUs): # -1x 0MB global shared mem operations # -1x 1000MB process shared mem operations # -1x 0MB thread local mem operations ### ### # # 0.0% [0.2 mins] 0/0 1/1 36/2 0/0 [36/3 ] l: 0-0 ( 0) {0-2} # 0.0% [0.3 mins] 43/3 37/2 39/2 41/3 [ 6/10] l: 0-1 ( 1) {1-2} # 0.0% [0.4 mins] 42/3 38/2 40/2 40/2 [ 4/9 ] l: 1-2 ( 1) [50.0%] {1-2} # 0.0% [0.6 mins] 41/3 39/2 40/2 40/2 [ 2/9 ] l: 2-4 ( 2) [50.0%] {1-2} # 0.0% [0.7 mins] 40/2 40/2 40/2 40/2 [ 0/8 ] l: 3-5 ( 2) [40.0%] ( 41.8s converged) Without this patch, this same perf bench numa mem run had to rely on the scheduler load balancer to first balance out the load (moving a random task), before a task swap could complete the NUMA convergence. The load balancer does not normally take action unless the load difference exceeds 25%. Convergence times of over half an hour have been observed without this patch. With this patch, the NUMA balancing code will simply migrate the task, if that does not cause an imbalance. Also skip examining a CPU in detail if the improvement on that CPU is no more than the best we already have. Signed-off-by: -
Rik van Riel authored
When a task is part of a numa_group, the comparison should always use the group weight, in order to make workloads converge. Signed-off-by:
-
Rik van Riel authored
When CONFIG_FAIR_GROUP_SCHED is enabled, the load that a task places on a CPU is determined by the group the task is in. The active groups on the source and destination CPU can be different, resulting in a different load contribution by the same task at its source and at its destination. As a result, the load needs to be calculated separately for each CPU, instead of estimated once with task_h_load(). Getting this calculation right allows some workloads to converge, where previously the last thread could get stuck on another node, without being able to migrate to its final destination. Signed-off-by:
-
Rik van Riel authored
Currently the NUMA code scales the load on each node with the amount of CPU power available on that node, but it does not apply any adjustment to the load of the task that is being moved over. On systems with SMT/HT, this results in a task being weighed much more heavily than a CPU core, and a task move that would even out the load between nodes being disallowed. The correct thing is to apply the power correction to the numbers after we have first applied the move of the tasks' loads to them. This also allows us to do the power correction with a multiplication, rather than a division. Also drop two function arguments for load_too_unbalanced, since it takes various factors from env already. Signed-off-by:
-
Rik van Riel authored
From task_numa_placement, always try to consolidate the tasks in a group on the group's top nid. In case this task is part of a group that is interleaved over multiple nodes, task_numa_migrate will set the task's preferred nid to the best node it could find for the task, so this patch will cause at most one run through task_numa_migrate. Signed-off-by:
-
Tim Chen authored
When a system is lightly loaded (i.e. no more than 1 job per cpu), attempt to pull job to a cpu before putting it to idle is unnecessary and can be skipped. This patch adds an indicator so the scheduler can know when there's no more than 1 active job is on any CPU in the system to skip needless job pulls. On a 4 socket machine with a request/response kind of workload from clients, we saw about 0.13 msec delay when we go through a full load balance to try pull job from all the other cpus. While 0.1 msec was spent on processing the request and generating a response, the 0.13 msec load balance overhead was actually more than the actual work being done. This overhead can be skipped much of the time for lightly loaded systems. With this patch, we tested with a netperf request/response workload that has the server busy with half the cpus in a 4 socket system. We found the patch eliminated 75% of the load balance attempts before idling a cpu. The overhead of setting/clearing the indicator is low as we already gather the necessary info while we call add_nr_running() and update_sd_lb_stats.() We switch to full load balance load immediately if any cpu got more than one job on its run queue in add_nr_running. We'll clear the indicator to avoid load balance when we detect no cpu's have more than one job when we scan the work queues in update_sg_lb_stats(). We are aggressive in turning on the load balance and opportunistic in skipping the load balance. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Acked-by:
Jason Low <jason.low2@hp.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Michel Lespinasse <walken@google.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Viresh Kumar authored
We don't need 'broadcast' to be set to 'zero or one', but to 'zero or non-zero' and so the extra operation to convert it to 'zero or one' can be skipped. Also change type of 'broadcast' to unsigned int, i.e. type of drv->states[*].flags. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Signed-off-by:
-
Mike Galbraith authored
If a task has been dequeued, it has been accounted. Do not project cycles that may or may not ever be accounted to a dequeued task, as that may make clock_gettime() both inaccurate and non-monotonic. Protect update_rq_clock() from slight TSC skew while at it. Signed-off-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Cc: kosaki.motohiro@jp.fujitsu.com Cc: pjt@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ben Segall authored
distribute_cfs_runtime() intentionally only hands out enough runtime to bring each cfs_rq to 1 ns of runtime, expecting the cfs_rqs to then take the runtime they need only once they actually get to run. However, if they get to run sufficiently quickly, the period timer is still in distribute_cfs_runtime() and no runtime is available, causing them to throttle. Then distribute has to handle them again, and this can go on until distribute has handed out all of the runtime 1ns at a time, which takes far too long. Instead allow access to the same runtime that distribute is handing out, accepting that corner cases with very low quota may be able to spend the entire cfs_b->runtime during distribute_cfs_runtime, meaning that the runtime directly handed out by distribute_cfs_runtime was over quota. In addition, if a cfs_rq does manage to throttle like this, make sure the existing distribute_cfs_runtime no longer loops over it again. Signed-off-by:
-
Viresh Kumar authored
sched_can_stop_tick() is using 7 spaces instead of 8 spaces or a 'tab' at the beginning of few lines. Which doesn't align well with the Coding Guidelines. Also remove local variable 'rq' as it is used at only one place and we can directly use this_rq() instead. Signed-off-by:
-
Peter Zijlstra authored
Because of a collision with 8d056c48 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline"), which ends up calling hotplug_cfd()->flush_smp_call_function_queue()->irq_work_run(), which is not from IRQ context. And since that already calls irq_work_run() from the hotplug path, remove our entire hotplug handling. Reported-by:
Stephen Warren <swarren@wwwdotorg.org> Tested-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ingo Molnar authored
Merge these two, because upcoming patches will touch both areas. Signed-off-by:
-
- 18 Jun, 2014 4 commits
-
-
Ingo Molnar authored
Merge branch 'timers/nohz-irq-work-v7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/nohz Pull nohz updates from Frederic Weisbecker: " This set moves the nohz kick, used to notify a full dynticks CPU when events require tick rescheduling, out of the scheduler tick to a dedicated IPI. This debloats a bit the scheduler IPI from off-topic work that was abusing that scheduler fast path for its convenient asynchronous properties. Now the nohz kick uses irq-work for its own needs. Of course this implied quite some background infrastructure rework, including: * Clean up some irq-work internals * Implement remote irq-work * Implement nohz kick on top of remote irq-work * Move full dynticks timer enqueue notification to new kick * Move multi-task notification to new kick * Remove unecessary barriers on multi-task notification " Signed-off-by:
-
Hillf Danton authored
When computing cache hot, we should check if the migration dst cpu is idle, instead of the current cpu. Though they are same in normal balancing, that is false nowadays in nohz idle balancing at least. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
-
Rik van Riel authored
It is possible that at task_numa_placement() time, the task's numa_preferred_nid does not change, but the task is not actually running on the preferred node at the time. In that case, we still want to attempt migration to the preferred node. Signed-off-by:
-
Rik van Riel authored
The first thing task_numa_migrate() does is check to see if there is CPU capacity available on the preferred node, in order to move the task there. However, if the preferred node is all busy, we would skip considering that node for tasks swaps in the subsequent loop. This prevents NUMA convergence of tasks on busy systems. However, swapping locations with a task on our preferred nid, when the preferred nid is busy, is perfectly fine. The fix is to also look for a CPU on our preferred nid when it is totally busy. This changes "perf bench numa mem -p 4 -t 20 -m -0 -P 1000" from not converging in 15 minutes on my 4 node system, to converging in 10-20 seconds. Signed-off-by:
-
- 17 Jun, 2014 1 commit
-
-
Konstantin Khlebnikov authored
This fixes use-after-free of epi->fllink.next inside list loop macro. This loop actually releases elements in the body. The list is rcu-protected but here we cannot hold rcu_read_lock because we need to lock mutex inside. The obvious solution is to use list_for_each_entry_safe(). RCU-ness isn't essential because nobody can change this list under us, it's final fput for this file. The bug was introduced by ae10b2b4 ("epoll: optimize EPOLL_CTL_DEL using rcu") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Stable <stable@vger.kernel.org> # 3.13+ Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Jun, 2014 11 commits
-
-
Frederic Weisbecker authored
A full dynticks CPU is allowed to stop its tick when a single task runs. Meanwhile when a new task gets enqueued, the CPU must be notified so that it can restart its tick to maintain local fairness and other accounting details. This notification is performed by way of an IPI. Then when the target receives the IPI, we expect it to see the new value of rq->nr_running. Hence the following ordering scenario: CPU 0 CPU 1 write rq->running get IPI smp_wmb() smp_rmb() send IPI read rq->nr_running But Paul Mckenney says that nowadays IPIs imply a full barrier on all architectures. So we can safely remove this pair and rely on the implicit barriers that come along IPI send/receive. Lets just comment on this new assumption. Acked-by:
Frederic Weisbecker <fweisbec@gmail.com>
-
Frederic Weisbecker authored
Now that we have a nohz full remote kick based on irq work, lets use it to notify a CPU that it's exiting single task mode. This unbloats a bit the scheduler IPI that the nohz code was abusing for its cool "callable anywhere/anytime" properties. Acked-by:
-
Frederic Weisbecker authored
When a new timer is enqueued on a full dynticks target, that CPU must re-evaluate the next tick to handle the timer correctly. This is currently performed through the scheduler IPI. Meanwhile this happens at the cost of off-topic workarounds in that fast path to make it call irq_exit(). As we plan to remove this hack off the scheduler IPI, lets use the nohz full kick instead. Pretty much any IPI fits for that job as long at it calls irq_exit(). The nohz full kick just happens to be handy and readily available here. If it happens to be too much an overkill in the future, we can still turn that timer kick into an empty IPI. Acked-by:
-
Frederic Weisbecker authored
Remotely kicking a full nohz CPU in order to make it re-evaluate its next tick is currently implemented using the scheduler IPI. However this bloats a scheduler fast path with an off-topic feature. The scheduler tick was abused here for its cool "callable anywhere/anytime" properties. But now that the irq work subsystem can queue remote callbacks, it's a perfect fit to safely queue IPIs when interrupts are disabled without worrying about concurrent callers. So lets implement remote kick on top of irq work. This is going to be used when a new event requires the next tick to be recalculated: more than 1 task competing on the CPU, timer armed, ... Acked-by:
-
Frederic Weisbecker authored
irq work currently only supports local callbacks. However its code is mostly ready to run remote callbacks and we have some potential user. The full nohz subsystem currently open codes its own remote irq work on top of the scheduler ipi when it wants a CPU to reevaluate its next tick. However this ad hoc solution bloats the scheduler IPI. Lets just extend the irq work subsystem to support remote queuing on top of the generic SMP IPI to handle this kind of user. This shouldn't add noticeable overhead. Suggested-by:
-
Frederic Weisbecker authored
An irq work can be handled from two places: from the tick if the work carries the "lazy" flag and the tick is periodic, or from a self IPI. We merge all these works in a single list and we use some per cpu latch to avoid raising a self-IPI when one is already pending. Now we could do away with this ugly latch if only the list was only made of non-lazy works. Just enqueueing a work on the empty list would be enough to know if we need to raise an IPI or not. Also we are going to implement remote irq work queuing. Then the per CPU latch will need to become atomic in the global scope. That's too bad because, here as well, just enqueueing a work on an empty list of non-lazy works would be enough to know if we need to raise an IPI or not. So lets take a way out of this: split the works in two distinct lists, one for the works that can be handled by the next tick and another one for those handled by the IPI. Just checking if the latter is empty when we queue a new work is enough to know if we need to raise an IPI. Suggested-by:
-
Benjamin Herrenschmidt authored
This reverts commit e1edf18b. This patch was a misguided attempt at fixing offb for LE ppc64 kernels on BE qemu but is just wrong ... it breaks real LE/LE setups, LE with real HW, and existing mixed endian systems that did the fight thing with the appropriate device-tree property. Bad reviewing on my part, sorry. The right fix is to either make qemu change its endian when the guest changes endian (working on that) or to use the existing foreign endian support. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13+] ---
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix checksumming regressions, from Tom Herbert. 2) Undo unintentional permissions changes for SCTP rto_alpha and rto_beta sysfs knobs, from Denial Borkmann. 3) VXLAN, like other IP tunnels, should advertize it's encapsulation size using dev->needed_headroom instead of dev->hard_header_len. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: sctp: fix permissions for rto_alpha and rto_beta knobs vxlan: Checksum fixes net: add skb_pop_rcv_encapsulation udp: call __skb_checksum_complete when doing full checksum net: Fix save software checksum complete net: Fix GSO constants to match NETIF flags udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookup vxlan: use dev->needed_headroom instead of dev->hard_header_len MAINTAINERS: update cxgb4 maintainer -
git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds authored
Pull more clock framework updates from Mike Turquette: "This contains the second half the of the clk changes for 3.16. They are simply fixes and code refactoring for the OMAP clock drivers. The sunxi clock driver changes include splitting out the one mega-driver into several smaller pieces and adding support for the A31 SoC clocks" * tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux: (25 commits) clk: sunxi: document PRCM clock compatible strings clk: sunxi: add PRCM (Power/Reset/Clock Management) clks support clk: sun6i: Protect SDRAM gating bit clk: sun6i: Protect CPU clock clk: sunxi: Rework clock protection code clk: sunxi: Move the GMAC clock to a file of its own clk: sunxi: Move the 24M oscillator to a file of its own clk: sunxi: Remove calls to clk_put clk: sunxi: document new A31 USB clock compatible clk: sunxi: Implement A31 USB clock ARM: dts: OMAP5/DRA7: use omap5-mpu-dpll-clock capable of dealing with higher frequencies CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies ARM: OMAP5+: dpll: support Duty Cycle Correction(DCC) CLK: TI: clk-54xx: Set the rate for dpll_abe_m2x2_ck CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic) dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings ARM: dts: dra7xx-clocks: Correct name for atl clkin3 clock CLK: TI: gate: add composite interface clock to OMAP2 only build ARM: OMAP2: clock: add DT boot support for cpufreq_ck CLK: TI: OMAP2: add clock init support ...
-
git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds authored
Pull NVMe update from Matthew Wilcox: "Mostly bugfixes again for the NVMe driver. I'd like to call out the exported tracepoint in the block layer; I believe Keith has cleared this with Jens. We've had a few reports from people who're really pounding on NVMe devices at scale, hence the timeout changes (and new module parameters), hotplug cpu deadlock, tracepoints, and minor performance tweaks" [ Jens hadn't seen that tracepoint thing, but is ok with it - it will end up going away when mq conversion happens ] * git://git.infradead.org/users/willy/linux-nvme: (22 commits) NVMe: Fix START_STOP_UNIT Scsi->NVMe translation. NVMe: Use Log Page constants in SCSI emulation NVMe: Define Log Page constants NVMe: Fix hot cpu notification dead lock NVMe: Rename io_timeout to nvme_io_timeout NVMe: Use last bytes of f/w rev SCSI Inquiry NVMe: Adhere to request queue block accounting enable/disable NVMe: Fix nvme get/put queue semantics NVMe: Delete NVME_GET_FEAT_TEMP_THRESH NVMe: Make admin timeout a module parameter NVMe: Make iod bio timeout a parameter NVMe: Prevent possible NULL pointer dereference NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD) NVMe: Update data structures for NVMe 1.2 NVMe: Enable BUILD_BUG_ON checks NVMe: Update namespace and controller identify structures to the 1.1a spec NVMe: Flush with data support NVMe: Configure support for block flush NVMe: Add tracepoints NVMe: Protect against badly formatted CQEs ...
-
- 15 Jun, 2014 6 commits
-
-
Daniel Borkmann authored
Commit 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") has silently changed permissions for rto_alpha and rto_beta knobs from 0644 to 0444. The purpose of this was to discourage users from tweaking rto_alpha and rto_beta knobs in production environments since they are key to correctly compute rtt/srtt. RFC4960 under section 6.3.1. RTO Calculation says regarding rto_alpha and rto_beta under rule C3 and C4: [...] C3) When a new RTT measurement R' is made, set RTTVAR <- (1 - RTO.Beta) * RTTVAR + RTO.Beta * |SRTT - R'| and SRTT <- (1 - RTO.Alpha) * SRTT + RTO.Alpha * R' Note: The value of SRTT used in the update to RTTVAR is its value before updating SRTT itself using the second assignment. After the computation, update RTO <- SRTT + 4 * RTTVAR. C4) When data is in flight and when allowed by rule C5 below, a new RTT measurement MUST be made each round trip. Furthermore, new RTT measurements SHOULD be made no more than once per round trip for a given destination transport address. There are two reasons for this recommendation: First, it appears that measuring more frequently often does not in practice yield any significant benefit [ALLMAN99]; second, if measurements are made more often, then the values of RTO.Alpha and RTO.Beta in rule C3 above should be adjusted so that SRTT and RTTVAR still adjust to changes at roughly the same rate (in terms of how many round trips it takes them to reflect new values) as they would if making only one measurement per round-trip and using RTO.Alpha and RTO.Beta as given in rule C3. However, the exact nature of these adjustments remains a research issue. [...] While it is discouraged to adjust rto_alpha and rto_beta and not further specified how to adjust them, the RFC also doesn't explicitly forbid it, but rather gives a RECOMMENDED default value (rto_alpha=3, rto_beta=2). We have a couple of users relying on the old permissions before they got changed. That said, if someone really has the urge to adjust them, we could allow it with a warning in the log. Fixes: 3fd091e7 ("[SCTP]: Remove multiple levels of msecs to jiffies conversions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tom Herbert says: ==================== Fixes related to some recent checksum modifications. - Fix GSO constants to match NETIF flags - Fix logic in saving checksum complete in __skb_checksum_complete - Call __skb_checksum_complete from UDP if we are checksumming over whole packet in order to save checksum. - Fixes to VXLAN to work correctly with checksum complete ==================== Signed-off-by: -
Tom Herbert authored
Call skb_pop_rcv_encapsulation and postpull_rcsum for the Ethernet header to work properly with checksum complete. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
This function is used by UDP encapsulation protocols in RX when crossing encapsulation boundary. If ip_summed is set to CHECKSUM_UNNECESSARY and encapsulation is not set, change to CHECKSUM_NONE since the checksum has not been validated within the encapsulation. Clears csum_valid by the same rationale. Signed-off-by:
-
Tom Herbert authored
In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by:
-
Tom Herbert authored
Geert reported issues regarding checksum complete and UDP. The logic introduced in commit 7e3cead5 ("net: Save software checksum complete") is not correct. This patch: 1) Restores code in __skb_checksum_complete_header except for setting CHECKSUM_UNNECESSARY. This function may be calculating checksum on something less than skb->len. 2) Adds saving checksum to __skb_checksum_complete. The full packet checksum 0..skb->len is calculated without adding in pseudo header. This value is saved in skb->csum and then the pseudo header is added to that to derive the checksum for validation. 3) In both __skb_checksum_complete_header and __skb_checksum_complete, set skb->csum_valid to whether checksum of zero was computed. This allows skb_csum_unnecessary to return true without changing to CHECKSUM_UNNECESSARY which was done previously. 4) Copy new csum related bits in __copy_skb_header. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
