- 25 Jun, 2019 40 commits
-
-
Stephane Eranian authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 583feb08 ] When an event is programmed with attr.wakeup_events=N (N>0), it means the caller is interested in getting a user level notification after N samples have been recorded in the kernel sampling buffer. With precise events on Intel processors, the kernel uses PEBS. The kernel tries minimize sampling overhead by verifying if the event configuration is compatible with multi-entry PEBS mode. If so, the kernel is notified only when the buffer has reached its threshold. Other PEBS operates in single-entry mode, the kenrel is notified for each PEBS sample. The problem is that the current implementation look at frequency mode and event sample_type but ignores the wakeup_events field. Thus, it may not be possible to receive a notification after each precise event. This patch fixes this problem by disabling multi-entry PEBS if wakeup_events is non-zero. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: https://lkml.kernel.org/r/20190306195048.189514-1-eranian@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Annaliese McDermond authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit c63adb28 ] The common pins were mistakenly not added to the DAPM graph. Adding these pins will allow valid graphs to be created. Signed-off-by:
Annaliese McDermond <nh6z@nh6z.net> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Daniel Mack authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit f0f2338a ] The CS4270 does not by default increment the register address on consecutive writes. During normal operation it doesn't matter as all register accesses are done individually. At resume time after suspend, however, the regcache code gathers the biggest possible block of registers to sync and sends them one on one go. To fix this, set the INCR bit in all cases. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Rander Wang authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 570f18b6 ] On HDaudio platforms, if playback is started when capture is working, there is no audible output. This can be root-caused to the use of the rx|tx_mask to store an HDaudio stream tag. If capture is stared before playback, rx_mask would be non-zero on HDaudio platform, then the channel number of playback, which is in the same codec dai with the capture, would be changed by soc_pcm_codec_params_fixup based on the tx_mask at first, then overwritten by this function based on rx_mask at last. According to the author of tx|rx_mask, tx_mask is for playback and rx_mask is for capture. And stream direction is checked at all other references of tx|rx_mask in ASoC, so here should be an error. This patch checks stream direction for tx|rx_mask for fixup function. This issue would affect not only HDaudio+ASoC, but also I2S codecs if the channel number based on rx_mask is not equal to the one for tx_mask. It could be rarely reproduecd because most drivers in kernel set the same channel number to tx|rx_mask or rx_mask is zero. Tested on all platforms using stream_tag & HDaudio and intel I2S platforms. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Jason Yan authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit b90cd6f2 upstream. When the lldd is processing the complete sas task in interrupt and set the task stat as SAS_TASK_STATE_DONE, the smp timeout timer is able to be triggered at the same time. And smp_task_timedout() will complete the task wheter the SAS_TASK_STATE_DONE is set or not. Then the sas task may freed before lldd end the interrupt process. Thus a use-after-free will happen. Fix this by calling the complete() only when SAS_TASK_STATE_DONE is not set. And remove the check of the return value of the del_timer(). Once the LLDD sets DONE, it must call task->done(), which will call smp_task_done()->complete() and the task will be completed and freed correctly. Reported-by:
chenxiang <chenxiang66@hisilicon.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> CC: Hannes Reinecke <hare@suse.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Guenter Roeck <linux@roeck-us.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jacopo Mondi authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 61da76be upstream. The following commits: commit f6dd927f ("[media] media: ov7670: calculate framerate properly for ov7675") commit 04ee6d92 ("[media] media: ov7670: add possibility to bypass pll for ov7675") introduced the ability to bypass PLL multiplier and use input clock (xvclk) as pixel clock output frequency for ov7675 sensor. PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675 sensor manuals. Macros used to set DBLV register seem wrong in the driver, as their values do not match what reported in the datasheet. Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to default 0x0a reserved value (according to datasheets). While at there, remove a write to DBLV register in "ov7675_set_framerate()" that over-writes the previous one to the same register that takes "info->pll_bypass" flag into account instead of setting PLL multiplier to 4x unconditionally. And, while at there, since "info->pll_bypass" is only used in set/get_framerate() functions used by ov7675 only, it is not necessary to check for the device id at probe time to make sure that when using ov7670 "info->pll_bypass" is set to false. Fixes: f6dd927f ("[media] media: ov7670: calculate framerate properly for ov7675") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Tony Luck authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 41f035a8 upstream. In c7d606f5 ("x86/mce: Improve error message when kernel cannot recover") a case was added for a machine check caused by a DATA access to poison memory from the kernel. A case should have been added also for an uncorrectable error during an instruction fetch in the kernel. Add that extra case so the error message now reads: mce: [Hardware Error]: Machine check: Instruction fetch error in kernel Fixes: c7d606f5 ("x86/mce: Improve error message when kernel cannot recover") Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Pu Wen <puwen@hygon.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190225205940.15226-1-tony.luck@intel.comSigned-off-by:
-
Ondrej Mosnacek authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit a83d6dda upstream. In the SECURITY_FS_USE_MNTPOINT case we never want to allow relabeling files/directories, so we should never set the SBLABEL_MNT flag. The 'special handling' in selinux_is_sblabel_mnt() is only intended for when the behavior is set to SECURITY_FS_USE_GENFS. While there, make the logic in selinux_is_sblabel_mnt() more explicit and add a BUILD_BUG_ON() to make sure that introducing a new SECURITY_FS_USE_* forces a review of the logic. Fixes: d5f3a5f6 ("selinux: add security in-core xattr support for pstore and debugfs") Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Anson Huang authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit bf2a7ca3 upstream. SNVS IRQ is requested before necessary driver data initialized, if there is a pending IRQ during driver probe phase, kernel NULL pointer panic will occur in IRQ handler. To avoid such scenario, just initialize necessary driver data before enabling IRQ. This patch is inspired by NXP's internal kernel tree. Fixes: d3dc6e23 ("input: keyboard: imx: add snvs power key driver") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jeremy Fertic authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 78accaea upstream. The lsb calculation is not masking the correct bits from the user input. Subtract 1 from (1 << offset) to correctly set up the mask to be applied to user input. The lsb register stores its value starting at the bit 7 position. adt7316_store_DAC() currently assumes the value is at the other end of the register. Shift the lsb value before storing it in a new variable lsb_reg, and write this variable to the lsb register. Fixes: 35f6b6b8 ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver") Signed-off-by:
Jeremy Fertic <jeremyfertic@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Jeremy Fertic authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 45130fb0 upstream. The calculation of the current dac value is using the wrong bits of the dac lsb register. Create two macros to shift the lsb register value into lsb position, depending on whether the dac is 10 or 12 bit. Initialize data to 0 so, with an 8 bit dac, the msb register value can be bitwise ORed with data. Fixes: 35f6b6b8 ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver") Signed-off-by:
-
Jeremy Fertic authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 10bfe7cc upstream. With adt7516/7/9, internal vref is available for dacs a and b, dacs c and d, or all dacs. The driver doesn't currently support internal vref for all dacs. Change the else if to an if so both bits are checked rather than just one or the other. Signed-off-by:
-
Malte Leip authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit c409ca3b upstream. Backport of the upstream commit, which fixed c6688ef9. c6688ef9 got backported as commit b6f826ba, as the unavailable function usb_endpoint_maxp_mult had to be replaced. The upstream commit removed the call to this function, so the backport is straightforward. Original commit message: Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c Background/reason: The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver. Fixes: b6f826ba ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") Signed-off-by:
Malte Leip <malte@leip.net> Cc: stable <stable@vger.kernel.org> # 4.4.x Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 2125801c ] clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow] static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~ The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit cd92d74d ] clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow] .coherent_dma_mask = DMA_BIT_MASK(64), ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 47b16820 ] If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following. [ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040 [ 10.681826] Faulting instruction address: 0xc0431480 [ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1] [ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440 [ 10.682387] Modules linked in: [ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2 [ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8 [ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+) [ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000 [ 10.683236] DEAR: 00000040 ESR: 00000000 [ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000 [ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000 [ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000 [ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800 [ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114 [ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114 [ 10.684602] Call Trace: [ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable) [ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c [ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68 [ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c [ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508 [ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8 [ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c [ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464 [ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4 [ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc [ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0 [ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234 [ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c [ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac [ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330 [ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478 [ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114 [ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c [ 10.687349] Instruction dump: [ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008 [ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008 [ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]--- Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels. Fixes: 74489a91 ("Add support for Xilinx SystemACE CompactFlash interface") Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mike Kravetz authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 58b6e5e8 ] When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked. Programs to reproduce: mount -t hugetlbfs nodev hugetlbfs mknod hugetlbfs/dev b 0 0 exec 30<> hugetlbfs/dev umount hugetlbfs/ resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations. Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Reported-by:
Yufen Yu <yuyufen@huawei.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yonglong Liu authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 8601a99d ] When enable SMMU, remove HNS driver will cause a WARNING: [ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8 [ 141.954673] Modules linked in: hns_enet_drv(-) [ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32 [ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017 [ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO) [ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8 [ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8 [ 142.027066] sp : ffff000013533b90 [ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600 [ 142.044420] x27: 0000000000000000 x26: 0000000000000000 [ 142.055113] x25: 0000000056000000 x24: 0000000000000015 [ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68 [ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000 [ 142.087192] x19: 0000000000001000 x18: 0000000000000007 [ 142.097885] x17: 000000000000000e x16: 0000000000000001 [ 142.108578] x15: 0000000000000019 x14: 363139343a70616d [ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000 [ 142.129963] x11: 00000000ffffffff x10: 0000000000000006 [ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0 [ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8 [ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000 [ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500 [ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035 [ 142.194120] Call trace: [ 142.199030] __iommu_dma_unmap+0xc0/0xc8 [ 142.206920] iommu_dma_unmap_page+0x20/0x28 [ 142.215335] __iommu_unmap_page+0x40/0x60 [ 142.223399] hnae_unmap_buffer+0x110/0x134 [ 142.231639] hnae_free_desc+0x6c/0x10c [ 142.239177] hnae_fini_ring+0x14/0x34 [ 142.246540] hnae_fini_queue+0x2c/0x40 [ 142.254080] hnae_put_handle+0x38/0xcc [ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv] [ 142.272312] platform_drv_remove+0x24/0x64 [ 142.280552] device_release_driver_internal+0x17c/0x20c [ 142.291070] driver_detach+0x4c/0x90 [ 142.298259] bus_remove_driver+0x5c/0xd8 [ 142.306148] driver_unregister+0x2c/0x54 [ 142.314037] platform_driver_unregister+0x10/0x18 [ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv] [ 142.335248] __arm64_sys_delete_module+0x214/0x25c [ 142.344891] el0_svc_common+0xb0/0x10c [ 142.352430] el0_svc_handler+0x24/0x80 [ 142.359968] el0_svc+0x8/0x7c0 [ 142.366104] ---[ end trace 60ad1cd58e63c407 ]--- The tx ring buffer map when xmit and unmap when xmit done. So in hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring() have a unmap operation for tx ring buffer, which is already unmapped when xmit done, than cause this WARNING. The hnae_alloc_buffers() is called in hnae_init_ring(), so the hnae_free_buffers() should be in hnae_fini_ring(), not in hnae_free_desc(). In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring(). When the ring buffer is tx ring, adds a piece of code to ensure that the tx ring is unmap. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yonglong Liu authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit acb1ce15 ] When the HNS driver loaded, always have an error print: "netif_napi_add() called with weight 256" This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64. So use NAPI_POLL_WEIGHT to fix it. Signed-off-by:
-
Michael Kelley authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 382e06d1 ] When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many. This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs). Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Louis Taylor authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 426b046b ] When compiling with -Wformat, clang emits the following warnings: drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:
Louis Taylor <louis@kragniz.eu> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 882c5e55 ] The DA9063AD doesn't support alarms on any seconds and its granularity is the minute. Set uie_unsupported in that case. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 93b919da ] symlink body shouldn't be freed without an RCU delay. Switch debugfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Similar to solution for bpf, only here it's even more obvious that ->evict_inode() can be dropped. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 4fdcfab5 ] free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by:
-
Konstantin Khorenko authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 18bebc6d ] Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example. # cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80 So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well. Signed-off-by:
Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 15d82d22 ] When no alarm has been programmed on RSK-RZA1, an error message is printed during boot: rtc rtc0: invalid alarm value: 2019-03-14T255:255:255 sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed. While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields. Fix this by returning -1 instead, as this value is handled fine for all fields. Signed-off-by:
-
He, Bo authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit cef0d494 ] There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference: BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc. [jkosina@suse.cz: update changelog a bit] Signed-off-by:
he, bo <bo.he@intel.com> Signed-off-by:
"Zhang, Jun" <jun.zhang@intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit c2b71462 upstream. The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active: URB 0000000031fb463e submitted while active WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363 The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface. Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound. This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation! As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative. It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit c01c348e upstream. Some drivers (such as the vub300 MMC driver) expect usb_string() to return a properly NUL-terminated string, even when an error occurs. (In fact, vub300's probe routine doesn't bother to check the return code from usb_string().) When the driver goes on to use an unterminated string, it leads to kernel errors such as stack-out-of-bounds, as found by the syzkaller USB fuzzer. An out-of-range string index argument is not at all unlikely, given that some devices don't provide string descriptors and therefore list 0 as the value for their string indexes. This patch makes usb_string() return a properly terminated empty string along with the -EINVAL error code when an out-of-range index is encountered. And since a USB string index is a single-byte value, indexes >= 256 are just as invalid as values of 0 or below. Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit c114944d upstream. The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings. The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry. Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit ef61eb43 upstream. The syzkaller USB fuzzer found a general-protection-fault bug in the yurex driver. The fault occurs when a device has been unplugged; the driver's interrupt-URB handler logs an error message referring to the device by name, after the device has been unregistered and its name deallocated. This problem is caused by the fact that the interrupt URB isn't cancelled until the driver's private data structure is released, which can happen long after the device is gone. The cure is to make sure that the interrupt URB is killed before yurex_disconnect() returns; this is exactly the sort of thing that usb_poison_urb() was meant for. Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 486efdc8 ] Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1 ("packet: validate address length if non-zero") Suggested-by:
David Laight <David.Laight@aculab.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Michael Chan authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit b4e30e8e ] The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 95c16925 ] A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 6c0afef5 ] syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Shmulik Ladkani authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit d2f0c961 ] Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb. As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior. Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex: - the correct iif is observed if forwarding path does not involve fragmentation/refragmentation - a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom Fix, by preserving skb_iif during 'ip_copy_metadata'. Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit e5c812e8 upstream. The line6 driver uses a lot of USB buffers off of the stack, which is not allowed on many systems, causing the driver to crash on some of them. Fix this up by dynamically allocating the buffers with kmalloc() which allows for proper DMA-able memory. Reported-by:
Christo Gouws <gouws.christo@gmail.com> Reported-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Changbin Du authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 9c38f1f0 ] Backspace is not working on some terminal emulators which do not send the key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127). But currently only '^?' is handled. Let's also handle '^H' for those terminals. Signed-off-by:
Changbin Du <changbin.du@gmail.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
raymond pang authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit dd08a8d9 ] When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for a stack virtual address. Stack DMA buffers must be avoided. Signed-off-by:
raymond pang <raymondpangxd@gmail.com> Signed-off-by:
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit c8206579 ] If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
