Fix system hang with below sequences:
~# ifconfig ethx down
~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx

After ethx down, stmmac all clocks gated off and then register access causes
system hang.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This should be a mistake to fix conflicts when removing RFC tag to
repost the patch.

Fixes: 5ec55823 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.

The KASAN's log reveals it:

[    3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[    3.238748 ] 2 locks held by swapper/0/1:
[    3.239151 ]  #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[    3.240026 ]  #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[    3.240873 ] Modules linked in:
[    3.241187 ] irq event stamp: 460854
[    3.241541 ] hardirqs last  enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[    3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[    3.242245 ] softirqs last  enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[    3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[    3.242245 ] Preemption disabled at:
[    3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[    3.242245 ] Kernel panic - not syncing: scheduling while atomic
[    3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty #16
[    3.242245 ] Call Trace:
[    3.242245 ]  dump_stack+0xba/0xf5
[    3.242245 ]  ? ql3xxx_probe+0x1f0/0xea0
[    3.242245 ]  panic+0x15a/0x3f2
[    3.242245 ]  ? vprintk+0x76/0x150
[    3.242245 ]  ? ql3xxx_probe+0x2aa/0xea0
[    3.242245 ]  __schedule_bug+0xae/0xe0
[    3.242245 ]  __schedule+0x72e/0xa00
[    3.242245 ]  schedule+0x43/0xf0
[    3.242245 ]  schedule_timeout+0x28b/0x500
[    3.242245 ]  ? del_timer_sync+0xf0/0xf0
[    3.242245 ]  ? msleep+0x2f/0x70
[    3.242245 ]  msleep+0x59/0x70
[    3.242245 ]  ql3xxx_probe+0x307/0xea0
[    3.242245 ]  ? _raw_spin_unlock_irqrestore+0x3a/0x70
[    3.242245 ]  ? pci_device_remove+0x110/0x110
[    3.242245 ]  local_pci_probe+0x45/0xa0
[    3.242245 ]  pci_device_probe+0x12b/0x1d0
[    3.242245 ]  really_probe+0x2a9/0x610
[    3.242245 ]  driver_probe_device+0x90/0x1d0
[    3.242245 ]  ? mutex_lock_nested+0x1b/0x20
[    3.242245 ]  device_driver_attach+0x68/0x70
[    3.242245 ]  __driver_attach+0x124/0x1b0
[    3.242245 ]  ? device_driver_attach+0x70/0x70
[    3.242245 ]  bus_for_each_dev+0xbb/0x110
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  driver_attach+0x27/0x30
[    3.242245 ]  bus_add_driver+0x1eb/0x2a0
[    3.242245 ]  driver_register+0xa9/0x180
[    3.242245 ]  __pci_register_driver+0x82/0x90
[    3.242245 ]  ? yellowfin_init+0x25/0x25
[    3.242245 ]  ql3xxx_driver_init+0x23/0x25
[    3.242245 ]  do_one_initcall+0x7f/0x3d0
[    3.242245 ]  ? rdinit_setup+0x45/0x45
[    3.242245 ]  ? rcu_read_lock_sched_held+0x4f/0x80
[    3.242245 ]  kernel_init_freeable+0x2aa/0x301
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  kernel_init+0x18/0x190
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ? rest_init+0x2c0/0x2c0
[    3.242245 ]  ret_from_fork+0x1f/0x30
[    3.242245 ] Dumping ftrace buffer:
[    3.242245 ]    (ftrace buffer empty)
[    3.242245 ] Kernel Offset: disabled
[    3.242245 ] Rebooting in 1 seconds.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/net/ethernet/microchip/encx24j600 files follows
this syntax, but the content inside does not comply with kernel-doc.

This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warning from kernel-doc.
For e.g., running scripts/kernel-doc -none
drivers/net/ethernet/microchip/encx24j600_hw.h emits:
warning: expecting prototype for h(). Prototype was for _ENCX24J600_HW_H() instead

Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Check that the MTU value requested by the VF is in the supported
range of MTUs before attempting to set the VF large packet enable,
otherwise reject the request. This also avoids unnecessary
register updates in the case of the 82599 controller.

Fixes: 872844dd ("ixgbe: Enable jumbo frames support w/ SR-IOV")
Co-developed-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building the nci test suite produces a binary, nci_dev, that git then
tries to track. Add a .gitignore file to tell git to ignore this binary.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 31db0dbd ("net: hso: check for allocation failure in
hso_create_bulk_serial_device()") recently started returning an error
when the driver fails to allocate resources for the interrupt endpoint
and tiocmget functionality.

For consistency let's bail out from probe also if the URB allocation
fails.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update Sergei's email address, as per commit 534a8bf0
("MAINTAINERS: switch to my private email for Renesas Ethernet
drivers").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hardware register having the server TID base can contain
invalid values when adapter is in bad state (for example,
due to AER fatal error). Reading these invalid values in the
register can lead to out-of-bound memory access. So, fix
by using the saved server TID base when clearing filters.

Fixes: b1a79360 ("cxgb4: Delete all hash and TCAM filters before resource cleanup")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2021-05-18

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

data->ctrl_stats should be memset with correct size.

Fixes: bfad2b97 ("ethtool: add interface to read standard MAC Ctrl stats")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's not correct to call napi_schedule() in pure process
context. Because we use __raise_softirq_irqoff() we require
callers to be in a context which will eventually lead to
softirq handling (hardirq, bh disabled, etc.).

With code as is users will see:

 NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!

Fixes: a8dd7ac1 ("net/mlx5e: Generalize RQ activation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Termination tables are restricted to have the default miss action and
cannot be set to forward to another table in case of a miss.
If the fs prio of the termination table is not the last one in the
list, fs_core will attempt to attach it to another table.

Set the unmanaged ft flag when creating the termination table ft
and select the tc offload prio for it to prevent fs_core from selecting
the forwarding to next ft miss action and use the default one.

In addition, set the flow that forwards to the termination table to
ignore ft level restrictions since the ft level is not set by fs_core
for unamanged fts.

Fixes: 249ccc3c ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>

During driver probe of device that has dynamic MSI-X feature enabled,
the following error is printed in some FW flavour (not released yet).

 mlx5_core 0000:06:00.0: firmware version: 4.7.4387
 mlx5_core 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link)
 mlx5_core 0000:06:00.0: mlx5_cmd_check:777:(pid 70599): SET_HCA_CAP(0x109) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x0)
 mlx5_core 0000:06:00.0: set_hca_cap:622:(pid 70599): handle_hca_cap failed
 mlx5_core 0000:06:00.0: mlx5_function_setup:1045:(pid 70599): set_hca_cap failed
 mlx5_core 0000:06:00.0: probe_one:1465:(pid 70599): mlx5_init_one failed with error code -22
 mlx5_core: probe of 0000:06:00.0 failed with error -22

In order to make the setting capability of MSI-X future proof, let's
query the current capabilities first.

Fixes: 604774ad ("net/mlx5: Dynamically assign MSI-X vectors count")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Expose MPFS configuration API

MPFS is the multi physical function switch that bridges traffic between
the physical port and any physical functions associated with it. The
driver is required to add or remove MAC entries to properly forward
incoming traffic to the correct physical function.

We export the API to control MPFS so that other drivers, such as
mlx5_vdpa are able to add MAC addresses of their network interfaces.

The MAC address of the vdpa interface must be configured into the MPFS L2
address. Failing to do so could cause, in some NIC configurations, failure
to forward packets to the vdpa network device instance.

Fix this by adding calls to update the MPFS table.

CC: <mst@redhat.com>
CC: <jasowang@redhat.com>
CC: <virtualization@lists.linux-foundation.org>
Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Avoid division by zero in the error flow. In the driver TC number can be
either 1 or 8. When TC count is set to 1, driver zero netdev->num_tc.
Hence, need to convert it back from 0 to 1 in the error flow.

Fixes: fa374877 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Rules with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE dest flag are
translated to destination FT in eswitch. Currently it is not possible to
mirror such rules because firmware doesn't support mixing FT and Vport
destinations in single rule when one of them adds encapsulation. Since the
only use case for MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE destination is
support for tunnel endpoints on VF and trying to offload such rule with
mirror action causes either crash in fs_core or firmware error with
syndrome 0xff6a1d, reject all such rules in mlx5 TC layer.

Fixes: 10742efc ("net/mlx5e: VF tunnel TX traffic offloading")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route,
lag activation can be missed if a stale (struct lag_mp)->mfi pointer
exists, which was associated with an older multipath route that had been
removed.

Normally, when a route is removed, it triggers mlx5_lag_fib_event(),
which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if
mlx5_lag_check_prereq() condition isn't met, for example when eswitch is
in legacy mode, the fib event is skipped and mfi pointer becomes stale.

Fix by resetting mfi pointer to NULL every time mlx5_lag_mp_init() is
called.

Fixes: 544fe7c2 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5e_attach_netdev can be called prior to registering the netdevice:
Example stack:

ipoib_new_child_link ->
ipoib_intf_init->
rdma_init_netdev->
mlx5_rdma_setup_rn->

mlx5e_attach_netdev->
mlx5e_num_channels_changed ->
mlx5e_set_default_xps_cpumasks ->
netif_set_xps_queue ->
__netif_set_xps_queue -> kmalloc

If any later stage fails at any point after mlx5e_num_channels_changed()
returns, XPS allocated maps will never be freed as they
are only freed during netdev unregistration, which will never happen for
yet to be registered netdevs.

Fixes: 3909a12e ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>

For unreachable route entry the fib dev does not exists.

Fixes: 8914add2 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Reported-by: Dennis Afanasev <dennis.afanasev@stateless.net>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

It could be the lag dev is null so stop processing the event.
In bond_enslave() the active/backup slave being set before setting the
upper dev so first event is without an upper dev.
After setting the upper dev with bond_master_upper_dev_link() there is
a second event and in that event we have an upper dev.

Fixes: 7e51891a ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The result of __dev_get_by_index() is not checked for NULL, which then
passed to mlx5e_attach_encap() and gets dereferenced.

Also, in case of a successful lookup, the net_device reference count is
not incremented, which may result in net_device pointer becoming invalid
at any time during mlx5e_attach_encap() execution.

Fix by using dev_get_by_index(), which does proper reference counting on
the net_device pointer. Also, handle nullptr return value when mirred
device is not found.

It's safe to call dev_put() on the mirred net_device pointer, right
after mlx5e_attach_encap() call, because it's not being saved/copied
down the call chain.

Fixes: 3c37745e ("net/mlx5e: Properly deal with encap flows add/del under neigh update")
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When a SF is inactivated and when it is in a TEARDOWN_REQUEST
state, driver still returns its state as active. This is incorrect.
Fix it by treating TEARDOWN_REQEUST as inactive state. When a SF
is still attached to the driver, on user request to reactivate EINVAL
error is returned. Inform user about it with better code EBUSY and
informative error message.

Fixes: 6a327321 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix print to print correct error code and not using IS_ERR() which
will just result in always printing 1.
Also return real err instead of always -EOPNOTSUPP.

Fixes: 10caabda ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

For remote mirroring, after the tunnel packets are received, they are
decapsulated and sent to representor, then re-encapsulated and sent
out over another tunnel. So reformat action is set only when the
destination is required to do encapsulation.

Fixes: 249ccc3c ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The result of dev_get_by_index_rcu() is not checked for NULL and then
gets dereferenced immediately.

Also, the RCU lock must be held by the caller of dev_get_by_index_rcu(),
which isn't satisfied by the call stack.

Fix by handling nullptr return value when iflink device is not found.
Add RCU locking around dev_get_by_index_rcu() to avoid possible adverse
effects while iterating over the net_device's hlist.

It is safe not to increment reference count of the net_device pointer in
case of a successful lookup, because it's already handled by VLAN code
during VLAN device registration (see register_vlan_dev and
netdev_upper_dev_link).

Fixes: 278748a9 ("net/mlx5e: Offload TC e-switch rules with egress VLAN device")
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5_core_dev holds pointer to static profile, hence when the
log_max_qp of the profile is override by some device, then it
effect all other mlx5 devices that share the same profile.
Fix it by having a profile instance for every mlx5 device.

Fixes: 883371c4 ("net/mlx5: Check FW limitations on log_max_qp before setting it")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Huazhong Tan says:

====================
net: hns3: fixes for -net

This series includes some bugfixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.

So adds checking for the return of skb_checksum_help().

Fixes: 76ad4f0e("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d2("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when adaptive is on, the user's coalesce configuration
may be overwritten by the dynamic one. The reason is that user's
configurations are saved in struct hns3_enet_tqp_vector whose
value maybe changed by the dynamic algorithm. To fix it, use
struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to
save and get the user's configuration.

BTW, operations of storing and restoring coalesce info in the reset
process are unnecessary now, so remove them as well.

Fixes: 434776a5 ("net: hns3: add ethtool_ops.set_coalesce support to PF")
Fixes: 7e96adc4 ("net: hns3: add ethtool_ops.get_coalesce support to PF")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the netdevice is registered before client initializing
complete. So there is a timewindow between netdevice available
and usable. In this case, if user try to change the channel number
or ring param, it may cause the hns3_set_rx_cpu_rmap() being called
twice, and report bug.

[47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0
[47199.430340] hns3 0000:35:00.0 eth1: already uninitialized
[47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1
[47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1
[47200.163524] ------------[ cut here ]------------
[47200.171674] kernel BUG at lib/cpu_rmap.c:142!
[47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge]
[47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G           O      5.11.0-rc3+ #1
[47200.215601] Hardware name:  , xxxxxx 02/04/2021
[47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[47200.230188] pc : cpu_rmap_add+0x38/0x40
[47200.237472] lr : irq_cpu_rmap_add+0x84/0x140
[47200.243291] sp : ffff800010e93a30
[47200.247295] x29: ffff800010e93a30 x28: ffff082100584880
[47200.254155] x27: 0000000000000000 x26: 0000000000000000
[47200.260712] x25: 0000000000000000 x24: 0000000000000004
[47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0
[47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680
[47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0
[47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0
[47200.293456] x15: fffffc2082990600 x14: dead000000000122
[47200.300059] x13: ffffffffffffffff x12: 000000000000003e
[47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000
[47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700
[47200.319682] x7 : 0000000000000000 x6 : 000000000000003f
[47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20
[47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80
[47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004
[47200.346058] Call trace:
[47200.349324]  cpu_rmap_add+0x38/0x40
[47200.354300]  hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3]
[47200.362294]  hns3_reset_notify_init_enet+0x1cc/0x340 [hns3]
[47200.370049]  hns3_change_channels+0x40/0xb0 [hns3]
[47200.376770]  hns3_set_channels+0x12c/0x2a0 [hns3]
[47200.383353]  ethtool_set_channels+0x140/0x250
[47200.389772]  dev_ethtool+0x714/0x23d0
[47200.394440]  dev_ioctl+0x4cc/0x640
[47200.399277]  sock_do_ioctl+0x100/0x2a0
[47200.404574]  sock_ioctl+0x28c/0x470
[47200.409079]  __arm64_sys_ioctl+0xb4/0x100
[47200.415217]  el0_svc_common.constprop.0+0x84/0x210
[47200.422088]  do_el0_svc+0x28/0x34
[47200.426387]  el0_svc+0x28/0x70
[47200.431308]  el0_sync_handler+0x1a4/0x1b0
[47200.436477]  el0_sync+0x174/0x180
[47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000)
[47200.448869] ---[ end trace a01efe4ce42e5f34 ]---

The process is like below:
excuting hns3_client_init
|
register_netdev()
|                           hns3_set_channels()
|                           |
hns3_set_rx_cpu_rmap()      hns3_reset_notify_uninit_enet()
|                               |
|                            quit without calling function
|                            hns3_free_rx_cpu_rmap for flag
|                            HNS3_NIC_STATE_INITED is unset.
|                           |
|                           hns3_reset_notify_init_enet()
|                               |
set HNS3_NIC_STATE_INITED    call hns3_set_rx_cpu_rmap()-- crash

Fix it by calling register_netdev() at the end of function
hns3_client_init().

Fixes: 08a10068 ("net: hns3: re-organize vector handle")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In hclge_mbx_handler(), if there are two consecutive mailbox
messages that requires resp_msg, the resp_msg is not cleared
after processing the first message, which will cause the resp_msg
data of second message incorrect.

Fix it by clearing the resp_msg before processing every mailbox
message.

Fixes: bb5790b7 ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lan78xx already calls skb_tx_timestamp() in its lan78xx_start_xmit().
Override .get_ts_info to also advertise this capability
(SOF_TIMESTAMPING_TX_SOFTWARE) via ethtool.
Signed-off-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to use "struct work_struct" for the finalize work queue
instead of "struct tipc_net_work", as it can get the "net" and "addr"
from tipc_net's other members and there is no need to add extra net
and addr in tipc_net by defining "struct tipc_net_work".

Note that it's safe to get net from tn->bcl as bcl is always released
after the finalize work queue is done.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We spotted a bug recently during a review where a driver was
unregistering a bus that wasn't registered, which would trigger this
BUG_ON().  Let's handle that situation more gracefully, and just print
a warning and return.
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Awogbemila says:

====================
GVE bug fixes

This patch series includes fixes to some bugs in the gve driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

SKBs with skb_get_queue_mapping(skb) == tx_cfg.num_queues should also be
considered invalid.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Brujin <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As currently written, if the driver checks for more work (via
gve_tx_poll or gve_rx_poll) before the device posts work and the
irq doorbell is not unmasked
(via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device
attempts to raise an interrupt, an interrupt is lost and this could
potentially lead to the traffic being completely halted. For
example, if a tx queue has already been stopped, the driver won't get
the chance to complete work and egress will be halted.

We need a full memory barrier in the poll
routine to ensure that the irq doorbell is unmasked before the driver
checks for more work.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Brujin <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When freeing notification blocks, we index priv->msix_vectors.
If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors)
this could lead to a NULL pointer dereference if the driver is unloaded.

Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Brujin <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we do not get the expected number of vectors from
pci_enable_msix_range, we update priv->num_ntfy_blks but not
priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx
is updated accordingly.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>