Once we have allowed timer interrupts to be enabled during the late
phase of suspending devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into low power states at
that time.  We can also use some related platform callbacks, like the
ones preparing devices for wake-up, during the late suspend.

Doing this will allow us to avoid the race condition where a device
using shared interrupts is put into a low power state with interrupts
enabled and then an interrupt (for another device) comes in and
confuses its driver.  At the same time, devices that don't support
the native PCI PM or that require some additional, platform-specific
operations to be carried out to put them into low power states will
be handled as appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Move pci_restore_standard_config() from pci.c to pci-driver.c and
make it static.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Once we have allowed timer interrupts to be enabled during the early
phase of resuming devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into D0 at that time.  Then,
the platform-specific PM code will have a chance to handle devices
that don't implement the native PCI PM or that require some
additional, platform-specific operations to be carried out to power
them up.  Also, by doing this we can simplify the code quite a bit.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>

I noticed two functions use a variable "i" to store the return value of PM
function calls while the rest of the file uses "error". As "i" normally
indicates a counter of some sort it seems better to keep this consistent.
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Change the ordering of the kexec jump code so that the nonboot CPUs
are disabled after calling device drivers' "late suspend" methods.

This change reflects the recent modifications of the power management
code that is also used by kexec jump.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

Change the ordering of the hibernation core code so that the platform
"prepare" callbacks are executed and the nonboot CPUs are disabled
after calling device drivers' "late suspend" methods.

This change (along with the previous analogous change of the suspend
core code) will allow us to rework the PCI PM core so that the power
state of devices is changed in the "late" phase of suspend (and
analogously in the "early" phase of resume), which in turn will allow
us to avoid the race condition where a device using shared interrupts
is put into a low power state with interrupts enabled and then an
interrupt (for another device) comes in and confuses its driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

Change the ordering of the suspend core code so that the platform
"prepare" callback is executed and the nonboot CPUs are disabled
after calling device drivers' "late suspend" methods.

This change will allow us to rework the PCI PM core so that the power
state of devices is changed in the "late" phase of suspend (and
analogously in the "early" phase of resume), which in turn will allow
us to avoid the race condition where a device using shared interrupts
is put into a low power state with interrupts enabled and then an
interrupt (for another device) comes in and confuses its driver.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

Use the functions introduced in by the previous patch,
suspend_device_irqs(), resume_device_irqs() and check_wakeup_irqs(),
to rework the handling of interrupts during suspend (hibernation) and
resume.  Namely, interrupts will only be disabled on the CPU right
before suspending sysdevs, while device drivers will be prevented
from receiving interrupts, with the help of the new helper function,
before their "late" suspend callbacks run (and analogously during
resume).

In addition, since the device interrups are now disabled before the
CPU has turned all interrupts off and the CPU will ACK the interrupts
setting the IRQ_PENDING bit for them, check in sysdev_suspend() if
any wake-up interrupts are pending and abort suspend if that's the
case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

Introduce helper functions allowing us to prevent device drivers from
getting any interrupts (without disabling interrupts on the CPU)
during suspend (or hibernation) and to make them start to receive
interrupts again during the subsequent resume.  These functions make it
possible to keep timer interrupts enabled while the "late" suspend and
"early" resume callbacks provided by device drivers are being
executed.  In turn, this allows device drivers' "late" suspend and
"early" resume callbacks to sleep, execute ACPI callbacks etc.

The functions introduced here will be used to rework the handling of
interrupts during suspend (hibernation) and resume.  Namely,
interrupts will only be disabled on the CPU right before suspending
sysdevs, while device drivers will be prevented from receiving
interrupts, with the help of the new helper function, before their
"late" suspend callbacks run (and analogously during resume).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits)
  Revert "cpuacct: reduce one NULL check in fast-path"
  Revert "x86: don't compile vsmp_64 for 32bit"
  x86: Correct behaviour of irq affinity
  x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe
  x86: use default_cpu_mask_to_apicid for 64bit
  x86: fix set_extra_move_desc calling
  x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot
  x86/dmi: fix dmi_alloc() section mismatches
  x86: e820 fix various signedness issues in setup.c and e820.c
  x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time
  x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together
  x86: irq.c use same path for show_interrupts
  x86: cpu/cpu.h cleanup
  x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c
  Revert "x86: create a non-zero sized bm_pte only when needed"
  x86: pci-nommu.c cleanup
  x86: io_delay.c cleanup
  x86: rtc.c cleanup
  x86: i8253 cleanup
  x86: kdebugfs.c cleanup
  ...

* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  Fix a lockdep warning in fasync_helper()
  Add a missing unlock_kernel() in raw_open()

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (21 commits)
  MIPS: Alchemy: PB1200: use SMC91X platform data.
  MIPS: Alchemy: MIPS hazard workarounds are not required.
  MIPS: Alchemy: provide cpu feature overrides.
  MIPS: Alchemy: unify CPU model constants.
  MIPS: Make a needlessly global symbol static in arch/mips/kernel/smp.c
  MIPS: Fix global namespace pollution in arch/mips/kernel/smp-up.c
  MIPS: Malta: make a needlessly global integer variable static
  MIPS: Use BUG_ON() where possible.
  MIPS: Convert obsolete irq_desc_t to struct irq_desc
  MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms
  MIPS: EMMA2RH: Set UART mapbase
  MIPS: EMMA2RH: Use set_irq_chip_and_handler_name
  MIPS: EMMA2RH: Use handle_edge_irq() handler for GPIO interrupts
  MIPS: Mark Eins: Fix cascading interrupt dispatcher
  MIPS: Au1000: convert to using gpiolib
  MIPS: Stop using <asm-generic/int-l64.h>.
  MIPS: Cavium: Add -Werror
  MIPS: Makefile: Add simple make install target.
  MIPS: Compat: Zero upper 32-bit of offset_high and offset_low.
  MIPS: __raw_spin_lock() may spin forever on ticket wrap.
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits)
  powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous
  powerpc/85xx: Add support for the "socrates" board (MPC8544).
  powerpc: Fix bugs introduced by sysfs changes
  powerpc: Sanitize stack pointer in signal handling code
  powerpc: Add write barrier before enabling DTL flags
  powerpc/83xx: Update ranges in gianfar node to match other dts
  powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
  powerpc/83xx: Add power management support for MPC837x boards
  powerpc/mm: Introduce early_init_mmu() on 64-bit
  powerpc/mm: Add option for non-atomic PTE updates to ppc64
  powerpc/mm: Fix printk type warning in mmu_context_nohash
  powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
  powerpc/mm: Merge various PTE bits and accessors definitions
  powerpc/mm: Tweak PTE bit combination definitions
  powerpc/cell: Fix iommu exception reporting
  powerpc/mm: e300c2/c3/c4 TLB errata workaround
  powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
  powerpc/mm: Remove unused register usage in SW TLB miss handling
  ...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (707 commits)
  V4L/DVB (11316): saa7191: tuner ops wasn't set.
  V4L/DVB (11315): cx25840: fix 'unused variable' warning.
  V4L/DVB (11314): au8522: remove unused I2C_DRIVERID
  V4L/DVB (11313): v4l2-subdev: add enum_framesizes and enum_frameintervals.
  V4L/DVB (11312): tuner: remove V4L1 code from this driver.
  V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers
  V4L/DVB (11310): cx18: remove intermediate 'ioctl' step
  V4L/DVB (11309): cx25840: cleanup: remove intermediate 'ioctl' step
  V4L/DVB (11308): msp3400: use the V4L2 header since no V4L1 code is there
  V4L/DVB (11305): cx88: prevent probing rtc and ir devices
  V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed.
  V4L/DVB (11303): tda7432: remove legacy code for old-style i2c API
  V4L/DVB (11302): tda9875: remove legacy code for old-style i2c API
  V4L/DVB (11301): wm8775: remove legacy code for old-style i2c API
  V4L/DVB (11300): cx88: convert to v4l2_subdev.
  V4L/DVB (11298): cx25840: remove legacy code for old-style i2c API
  V4L/DVB (11297): cx23885: convert to v4l2_subdev.
  V4L/DVB (11296): cx23885: bugfix error message if firmware is not found
  V4L/DVB (11295): cx23885: convert to v4l2_device.
  V4L/DVB (11293): uvcvideo: Add zero fill for VIDIOC_ENUM_FMT
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix fuse_file_lseek returning with lock held

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (70 commits)
  ide: keep track of number of bytes instead of sectors in struct ide_cmd
  ide: remove ide_execute_pkt_cmd() (v2)
  ide: add ->dma_timer_expiry method and remove ->dma_exec_cmd one (v2)
  ide: set hwif->expiry prior to calling [__]ide_set_handler()
  ide: use do_rw_taskfile() for ATA_CMD_PACKET commands
  ide: pass command to ide_map_sg()
  ide: remove ide_end_request()
  ide: use ide_end_rq() in ide_complete_rq()
  ide: pass number of bytes to complete to ide_complete_rq()
  ide: remove BUG() from ide_complete_rq()
  ide: move rq->errors quirk out from ide_end_request()
  ide: pass error value to ide_complete_rq()
  ide: sanitize ide_end_rq()
  ide: add ide_end_rq() (v2)
  ide: make ide_special_rq() BUG() on unknown requests
  ide: sanitize ide_finish_cmd()
  ide: use ide_complete_cmd() for REQ_UNPARK_HEADS
  ide: use ide_complete_cmd() for head unload commands
  ide: task_error() -> task_error_cmd()
  ide: unify exit paths in task_pio_intr()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: needs crc32_le
  jfs: Fix error handling in metapage_writepage()
  jfs: return f_fsid for statfs(2)
  jfs: remove xtLookupList()
  jfs: clean up a dangling comment

The tuner ops pointer wasn't set, so s_std never worked here.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

I2C_DRIVERIDs are no longer needed with v4l2_subdev and will be removed
from the kernel soon.

Cc: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

These callbacks are needed for omap.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

No i2c modules are called with the V4L1 API anymore, so this can be removed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Replace 'VIDIOC_' references in v4l i2c drivers by their new v4l2_subdev
callback names.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The audio and vbi parts still used an 'ioctl'-like interface. Replace this
with normal functions.

Cc: Andy Walls <awalls@radix.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The audio and vbi functions where still called through an ioctl-like
interface, even though this is no longer needed with v4l2-subdev. Just
change each 'case' into a proper function and call that directly.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

tuner-core.c contains a hack for cx88 board to prevent probing of certain
addresses:

        /* HACK: Ignore 0x6b and 0x6f on cx88 boards.
         * FusionHDTV5 RT Gold has an ir receiver at 0x6b
         * and an RTC at 0x6f which can get corrupted if probed.
         */

With the new i2c API this hack no longer works. So instead change the
list of tuner probe addresses in the cx88 driver itself, which is much
more clean.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Several i2c drivers still used v4l2_subdev_command, even though they were
converted to v4l2_subdev. Remove those unused .command callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

tda7432 is no longer used with the old-style i2c API, so I can remove
the support for that.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

tda9875 is no longer used with the old-style i2c API, so I can remove
the support for that.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

All drivers that use wm8775 are now converted to v4l2_subdev, so I can remove
the support for the old-style i2c API.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Convert cx88 to use v4l2_subdev since the old i2c autoprobing mechanism
will be removed.

Added code to explicitly load tvaudio where needed. Also fix the rtc-isl1208
support: since that driver no longer supports autoprobing it has to be
loaded using the new i2c API.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

All drivers that use cx25840 are now converted to v4l2_subdev, so I can remove
the support for the old-style i2c API.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Convert this driver to v4l2_subdev. Note that currently the only card with
analog support in this driver is the HVR-1800. The analog tuner support in
this driver is limited to what is needed for this board. When analog support
is added for other cards, then the tuner load code will probably have to be
expanded to take care of those boards. For example, there is currently no
support for either radio tuners or tda9887 demods.

I'd like to thank Steven Toth for testing this on his HVR-1800.
Tested-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

If the firmware failed to be found the error message indicated
the incorrect filename.
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

When enumerating formats with VIDIOC_ENUM_FMT the uvcvideo driver does not
fill the reserved fields of the struct v4l2_fmtdesc with zeros as required by
V4L2 API revision 0.24 [1]. Add the missing initializations.

The patch was tested with v4l-test 0.10 [2] with CNF7129 webcam found on EeePC
901.

References:
[1] V4L2 API specification, revision 0.24
    http://v4l2spec.bytesex.org/spec/r8367.htm

[2] v4l-test: Test environment for Video For Linux Two API
    http://v4l-test.sourceforge.net/Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch introduces support for DVB-T for the following dibcom based card:
  Elgato EyeTV DTT (USB-ID: 0fd9:0021)
Signed-off-by: Klaus Flittner <klaus@flittner.org>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>