- 31 Oct, 2011 1 commit
-
-
Mandeep Singh Baines authored
Allow QUEUE_FLAG_NONROT to propagate up the device stack if all underlying devices are non-rotational. Tools like ureadahead will schedule IOs differently based on the rotational flag. With this patch, I see boot time go from 7.75 s to 7.46 s on my device. Suggested-by: J. Richard Barnette <jrbarnette@chromium.org> Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: dm-devel@redhat.com Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
- 24 Oct, 2011 4 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/iommu-2.6Linus Torvalds authored
* git://git.infradead.org/iommu-2.6: intel-iommu: fix superpage support in pfn_to_dma_pte() intel-iommu: set iommu_superpage on VM domains to lowest common denominator intel-iommu: fix return value of iommu_unmap() API MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move intel-iommu: Export a flag indicating that the IOMMU is used for iGFX. intel-iommu: Workaround IOTLB hang on Ironlake GPU intel-iommu: Fix AB-BA lockdep report
-
http://people.redhat.com/agk/git/linux-dmLinus Torvalds authored
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm: dm kcopyd: fix job_pool leak
-
Takashi Iwai authored
Commit 4b239f45 ("x86-64, mm: Put early page table high") causes a S4 regression since 2.6.39, namely the machine reboots occasionally at S4 resume. It doesn't happen always, overall rate is about 1/20. But, like other bugs, once when this happens, it continues to happen. This patch fixes the problem by essentially reverting the memory assignment in the older way. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yinghai.lu@oracle.com> [ We'll hopefully find the real fix, but that's too late for 3.1 now ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Oct, 2011 3 commits
-
-
Alasdair G Kergon authored
Fix memory leak introduced by commit a6e50b40 (dm snapshot: skip reading origin when overwriting complete chunk). When allocating a set of jobs from kc->job_pool, job->master_job must be set (to point to itself) so that the mempool item gets freed when the master_job completes. master_job was introduced by commit c6ea41fb (dm kcopyd: preallocate sub jobs to avoid deadlock) Reported-by: Michael Leun <ml@newton.leun.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
git://github.com/kgene/linux-samsungLinus Torvalds authored
* 'samsung-fixes-4' of git://github.com/kgene/linux-samsung: ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM ARM: S5P: fix offset calculation on gpio-interrupt
-
Linus Torvalds authored
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Fix negative 8-bit temperature values
-
- 21 Oct, 2011 5 commits
-
-
Domenico Andreoli authored
v2: - register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be conditionally compiled out, it is already optimized out on !CONFIG_PM - fix also s3c2412 and s3c2416 affected by the same build issue v1: s3c2440.c fails to build if !CONFIG_PM because in such case s3c2410_pm_syscore_ops is not defined. Same error should happen also in s3c2410.c and s3c2442.c Signed-off-by: Domenico Andreoli <cavokz@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
git://github.com/herbertx/cryptoLinus Torvalds authored
* git://github.com/herbertx/crypto: crypto: ghash - Avoid null pointer dereference if no key is set
-
git://github.com/tiwai/soundLinus Torvalds authored
* 'fix/hda' of git://github.com/tiwai/sound: ALSA: HDA: conexant support for Lenovo T520/W520 ALSA: hda - Add position_fix quirk for Dell Inspiron 1010
-
Nick Bowler authored
The ghash_update function passes a pointer to gf128mul_4k_lle which will be NULL if ghash_setkey is not called or if the most recent call to ghash_setkey failed to allocate memory. This causes an oops. Fix this up by returning an error code in the null case. This is trivially triggered from unprivileged userspace through the AF_ALG interface by simply writing to the socket without setting a key. The ghash_final function has a similar issue, but triggering it requires a memory allocation failure in ghash_setkey _after_ at least one successful call to ghash_update. BUG: unable to handle kernel NULL pointer dereference at 00000670 IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc Pid: 1502, comm: hashatron Tainted: G W 3.1.0-rc9-00085-ge9308cfd #32 Bochs Bochs EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0 EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul] EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000 ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000) Stack: 00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000 00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc 00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000 Call Trace: [<c101a520>] ? kmap_atomic_prot+0x37/0xa6 [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic] [<c11676ed>] crypto_shash_update+0x18/0x1b [<c11679ad>] shash_ahash_update+0x22/0x36 [<c11679cc>] shash_async_update+0xb/0xd [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash] [<c121b24c>] kernel_sendpage+0x39/0x4e [<d88ce000>] ? 0xd88cdfff [<c121b298>] sock_sendpage+0x37/0x3e [<c121b261>] ? kernel_sendpage+0x4e/0x4e [<c10b4dbc>] pipe_to_sendpage+0x56/0x61 [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b51f5>] __splice_from_pipe+0x36/0x55 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b6383>] splice_from_pipe+0x51/0x64 [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c [<c10b63d5>] generic_splice_sendpage+0x13/0x15 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b527f>] do_splice_from+0x5d/0x67 [<c10b6865>] sys_splice+0x2bf/0x363 [<c129373b>] ? sysenter_exit+0xf/0x16 [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f [<c129370c>] sysenter_do_call+0x12/0x32 Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4 CR2: 0000000000000670 ---[ end trace 4eaa2a86a8e2da24 ]--- note: hashatron[1502] exited with preempt_count 1 BUG: scheduling while atomic: hashatron/1502/0x10000002 INFO: lockdep is turned off. [...] Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Cc: stable@kernel.org [2.6.37+] Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Marek Szyprowski authored
Offsets of the irq controller registers were calculated correctly only for first GPIO bank. This patch fixes calculation of the register offsets for all GPIO banks. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 20 Oct, 2011 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add alignment flag to PCI expansion resources sparc: Avoid calling sigprocmask() sparc: Use set_current_blocked() sparc32,leon: SRMMU MMU Table probe fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fib_rules: fix unresolved_rules counting r8169: fix wrong eee setting for rlt8111evl r8169: fix driver shutdown WoL regression. ehea: Change maintainer to me pptp: pptp_rcv_core() misses pskb_may_pull() call tproxy: copy transparent flag when creating a time wait pptp: fix skb leak in pptp_xmit() bonding: use local function pointer of bond->recv_probe in bond_handle_frame smsc911x: Add support for SMSC LAN89218 tg3: negate USE_PHYLIB flag check netconsole: enable netconsole can make net_device refcnt incorrent bluetooth: Properly clone LSM attributes to newly created child connections l2tp: fix a potential skb leak in l2tp_xmit_skb() bridge: fix hang on removal of bridge via netlink x25: Prevent skb overreads when checking call user data x25: Handle undersized/fragmented skbs x25: Validate incoming call user data lengths udplite: fast-path computation of checksum coverage IPVS netns shutdown/startup dead-lock netfilter: nf_conntrack: fix event flooding in GRE protocol tracker
-
Jean Delvare authored
Since 8-bit temperature values are now handled in 16-bit struct members, values have to be cast to s8 for negative temperatures to be properly handled. This is broken since kernel version 2.6.39 (commit bce26c58.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
-
Hugh Dickins authored
I don't usually pay much attention to the stale "? " addresses in stack backtraces, but this lucky report from Pawel Sikora hints that mremap's move_ptes() has inadequate locking against page migration. 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page(): kernel BUG at include/linux/swapops.h:105! RIP: 0010:[<ffffffff81127b76>] [<ffffffff81127b76>] migration_entry_wait+0x156/0x160 [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0 [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120 [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310 [<ffffffff81102a31>] handle_mm_fault+0x181/0x310 [<ffffffff81106097>] ? vma_adjust+0x537/0x570 [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0 [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570 [<ffffffff81421d5f>] page_fault+0x1f/0x30 mremap's down_write of mmap_sem, together with i_mmap_mutex or lock, and pagetable locks, were good enough before page migration (with its requirement that every migration entry be found) came in, and enough while migration always held mmap_sem; but not enough nowadays, when there's memory hotremove and compaction. The danger is that move_ptes() lets a migration entry dodge around behind remove_migration_pte()'s back, so it's in the old location when looking at the new, then in the new location when looking at the old. Either mremap's move_ptes() must additionally take anon_vma lock(), or migration's remove_migration_pte() must stop peeking for is_swap_entry() before it takes pagetable lock. Consensus chooses the latter: we prefer to add overhead to migration than to mremapping, which gets used by JVMs and by exec stack setup. Reported-and-tested-by: Paweł Sikora <pluto@agmk.net> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Oct, 2011 23 commits
-
-
Kjetil Oftedal authored
Currently no type of alignment is specified for PCI expansion roms while parsing the openfirmware tree. This causes calls to pci_map_rom() to fail. IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in pci/probe.c, and has been verified to work with various cards on a ultra 10. Signed-off-By: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan, Zheng authored
we should decrease ops->unresolved_rules when deleting a unresolved rule. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Correct the wrong parameter for setting EEE for RTL8111E-VL. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
Due to commit 92fc43b4 ("r8169: modify the flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on RxConfig bits which are needed for WOL on some versions of the hardware. As these bits were formerly set from the r81{0x, 68}_pll_power_down methods, factor them out for use in the driver shutdown (rtl_shutdown) handler. I favored __rtl8169_get_wol() -hardware state indication- over RTL_FEATURE_WOL as the latter has become a good candidate for removal. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Tested-by: Marc Ballarin <ballarin.marc@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
Breno Leitao has passed the maintainership to me. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Breno Leitão <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://linuxtv.org/mchehab/for_linusLinus Torvalds authored
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] videodev: fix a NULL pointer dereference in v4l2_device_release()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/atom: fix handling of FB scratch indices drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2) drm/radeon/kms/DCE4.1: ss is not supported on the internal pplls drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping ttm: Fix error-path using an uninitialized value
-
Antonio Ospite authored
The change in 8280b662 does not cover the case when v4l2_dev is already NULL, fix that. With a Kinect sensor, seen as an USB camera using GSPCA in this context, a NULL pointer dereference BUG can be triggered by just unplugging the device after the camera driver has been loaded. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Allen Kay authored
If target_level == 0, current code breaks out of the while-loop if SUPERPAGE bit is set. We should also break out if PTE is not present. If we don't do this, KVM calls to iommu_iova_to_phys() will cause pfn_to_dma_pte() to create mapping for 4KiB pages. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Allen Kay authored
set dmar->iommu_superpage field to the smallest common denominator of super page sizes supported by all active VT-d engines. Initialize this field in intel_iommu_domain_init() API so intel_iommu_map() API will be able to use iommu_superpage field to determine the appropriate super page size to use. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Allen Kay authored
iommu_unmap() API expects IOMMU drivers to return the actual page order of the address being unmapped. Previous code was just returning page order passed in from the caller. This patch fixes this problem. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Roland Dreier authored
Commit 166e9278 ("x86/ia64: intel-iommu: move to drivers/iommu/") moved the VT-d driver to drivers/iommu, but left the "F:" line in MAINTAINERS pointing to drivers/pci, which breaks scripts/get_maintainer.pl. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Alex Deucher authored
FB scratch indices are dword indices, but we were treating them as byte indices. As such, we were getting the wrong FB scratch data for non-0 indices. Fix the indices and guard the indexing against indices larger than the scratch allocation. Fixes memory corruption on some boards if data was written past the end of the FB scratch array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Dave Airlie <airlied@redhat.com> Tested-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Eric Dumazet authored
e1000e uses paged frags, so any layer incorrectly pulling bytes from skb can trigger a BUG in skb_pull() [951.142737] [<ffffffff813d2f36>] skb_pull+0x15/0x17 [951.142737] [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp] [951.152725] [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105 [951.163558] [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp] [951.165092] [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre] [951.165092] [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1 [951.177599] [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1 [951.177599] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.177599] [<ffffffff81410996>] ip_local_deliver+0x51/0x55 [951.177599] [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e [951.177599] [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e [951.204898] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.214651] [<ffffffff81410bb5>] ip_rcv+0x21b/0x246 pptp_rcv_core() is a nice example of a function assuming everything it needs is available in skb head. Reported-by: Bradley Peterson <despite@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
KOVACS Krisztian authored
The transparent socket option setting was not copied to the time wait socket when an inet socket was being replaced by a time wait socket. This broke the --transparent option of the socket match and may have caused that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state were being dropped by the packet filter. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In case we cant transmit skb, we must free it Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mitsuo Hayasaka authored
The bond->recv_probe is called in bond_handle_frame() when a packet is received, but bond_close() sets it to NULL. So, a panic occurs when both functions work in parallel. Why this happen: After null pointer check of bond->recv_probe, an sk_buff is duplicated and bond->recv_probe is called in bond_handle_frame. So, a panic occurs when bond_close() is called between the check and call of bond->recv_probe. Patch: This patch uses a local function pointer of bond->recv_probe in bond_handle_frame(). So, it can avoid the null pointer dereference. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Edworthy authored
LAN89218 is register compatible with LAN911x. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This results tg3_phy_fini->phy_disconnect is never called and when tg3 module is removed. In my case this resulted in panics in phy_state_machine calling function phydev->adjust_link. So correct this check. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao feng authored
There is no check if netconsole is enabled current. so when exec echo 1 > enabled; the reference of net_device will increment always. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-