Skip to content

L
linux
Switch branch/tag
  1. 11 Mar, 2020 1 commit
  3. 01 Mar, 2020 5 commits
  5. 29 Feb, 2020 4 commits
    • Dan Carpenter's avatar
      ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() · 37b0b6b8
      Dan Carpenter authored 
      If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: default avatarSuraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      37b0b6b8
    • Wolfram Sang's avatar
      macintosh: therm_windtunnel: fix regression when instantiating devices · 38b17afb
      Wolfram Sang authored 
      Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: default avatarErhard Furtner <erhard_f@mailbox.org>
Tested-by: default avatarErhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+
      38b17afb
    • Qian Cai's avatar
      jbd2: fix data races at struct journal_head · 6c5d9112
      Qian Cai authored 
      journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarQian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      6c5d9112
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 7557c1b3
      Linus Torvalds authored 
      Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID
      7557c1b3
  7. 28 Feb, 2020 21 commits
  9. 27 Feb, 2020 9 commits
    • Lukas Bulwahn's avatar
      MAINTAINERS: Correct Cadence PCI driver path · 5901b51f
      Lukas Bulwahn authored 
      de80f95c ("PCI: cadence: Move all files to per-device cadence
directory") moved files of the PCI cadence drivers, but did not update the
MAINTAINERS entry.

Since then, ./scripts/get_maintainer.pl --self-test complains:

  warning: no file matches F: drivers/pci/controller/pcie-cadence*

Repair the MAINTAINERS entry.

Link: https://lore.kernel.org/r/20200221185402.4703-1-lukas.bulwahn@gmail.comSigned-off-by: default avatarLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
      5901b51f
    • Jens Axboe's avatar
      io_uring: fix 32-bit compatability with sendmsg/recvmsg · d8768362
      Jens Axboe authored 
      We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise
the iovec import for these commands will not do the right thing and fail
the command with -EINVAL.

Found by running the test suite compiled as 32-bit.

Cc: stable@vger.kernel.org
Fixes: aa1fa28f ("io_uring: add support for recvmsg()")
Fixes: 0fa03c62 ("io_uring: add support for sendmsg()")
Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      d8768362
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Fix masking of egress port · 3ee339eb
      Andrew Lunn authored 
      Add missing ~ to the usage of the mask.
Reported-by: default avatarKevin Benson <Kevin.Benson@zii.aero>
Reported-by: default avatarChris Healy <Chris.Healy@zii.aero>
Fixes: 5c74c54c ("net: dsa: mv88e6xxx: Split monitor port configuration")
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3ee339eb
    • Amit Cohen's avatar
      mlxsw: pci: Wait longer before accessing the device after reset · ac004e84
      Amit Cohen authored 
      During initialization the driver issues a reset to the device and waits
for 100ms before checking if the firmware is ready. The waiting is
necessary because before that the device is irresponsive and the first
read can result in a completion timeout.

While 100ms is sufficient for Spectrum-1 and Spectrum-2, it is
insufficient for Spectrum-3.

Fix this by increasing the timeout to 200ms.

Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: default avatarAmit Cohen <amitc@mellanox.com>
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ac004e84
    • Alex Maftei (amaftei)'s avatar
      sfc: fix timestamp reconstruction at 16-bit rollover points · 23797b98
      Alex Maftei (amaftei) authored 
      We can't just use the top bits of the last sync event as they could be
off-by-one every 65,536 seconds, giving an error in reconstruction of
65,536 seconds.

This patch uses the difference in the bottom 16 bits (mod 2^16) to
calculate an offset that needs to be applied to the last sync event to
get to the current time.
Signed-off-by: default avatarAlexandru-Mihai Maftei <amaftei@solarflare.com>
Acked-by: default avatarMartin Habets <mhabets@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      23797b98
    • Stefano Garzarella's avatar
      vsock: fix potential deadlock in transport->release() · 3f74957f
      Stefano Garzarella authored 
      Some transports (hyperv, virtio) acquire the sock lock during the
.release() callback.

In the vsock_stream_connect() we call vsock_assign_transport(); if
the socket was previously assigned to another transport, the
vsk->transport->release() is called, but the sock lock is already
held in the vsock_stream_connect(), causing a deadlock reported by
syzbot:

    INFO: task syz-executor280:9768 blocked for more than 143 seconds.
      Not tainted 5.6.0-rc1-syzkaller #0
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    syz-executor280 D27912  9768   9766 0x00000000
    Call Trace:
     context_switch kernel/sched/core.c:3386 [inline]
     __schedule+0x934/0x1f90 kernel/sched/core.c:4082
     schedule+0xdc/0x2b0 kernel/sched/core.c:4156
     __lock_sock+0x165/0x290 net/core/sock.c:2413
     lock_sock_nested+0xfe/0x120 net/core/sock.c:2938
     virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832
     vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454
     vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288
     __sys_connect_file+0x161/0x1c0 net/socket.c:1857
     __sys_connect+0x174/0x1b0 net/socket.c:1874
     __do_sys_connect net/socket.c:1885 [inline]
     __se_sys_connect net/socket.c:1882 [inline]
     __x64_sys_connect+0x73/0xb0 net/socket.c:1882
     do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

To avoid this issue, this patch remove the lock acquiring in the
.release() callback of hyperv and virtio transports, and it holds
the lock when we call vsk->transport->release() in the vsock core.

Reported-by: syzbot+731710996d79d0d58fbc@syzkaller.appspotmail.com
Fixes: 408624af ("vsock: use local transport when it is loaded")
Signed-off-by: default avatarStefano Garzarella <sgarzare@redhat.com>
Reviewed-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f74957f
    • David S. Miller's avatar
      unix: It's CONFIG_PROC_FS not CONFIG_PROCFS · 5c05a164
      David S. Miller authored 
      Fixes: 3a12500e ("unix: define and set show_fdinfo only if procfs is enabled")
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5c05a164
    • David S. Miller's avatar
      Merge branch 'net-rmnet-fix-several-bugs' · 795c03a5
      David S. Miller authored 
      Taehee Yoo says:

====================
net: rmnet: fix several bugs

This patchset is to fix several bugs in RMNET module.

1. The first patch fixes NULL-ptr-deref in rmnet_newlink().
When rmnet interface is being created, it uses IFLA_LINK
without checking NULL.
So, if userspace doesn't set IFLA_LINK, panic will occur.
In this patch, checking NULL pointer code is added.

2. The second patch fixes NULL-ptr-deref in rmnet_changelink().
To get real device in rmnet_changelink(), it uses IFLA_LINK.
But, IFLA_LINK should not be used in rmnet_changelink().

3. The third patch fixes suspicious RCU usage in rmnet_get_port().
rmnet_get_port() uses rcu_dereference_rtnl().
But, rmnet_get_port() is used by datapath.
So, rcu_dereference_bh() should be used instead of rcu_dereference_rtnl().

4. The fourth patch fixes suspicious RCU usage in
rmnet_force_unassociate_device().
RCU critical section should not be scheduled.
But, unregister_netdevice_queue() in the rmnet_force_unassociate_device()
would be scheduled.
So, the RCU warning occurs.
In this patch, the rcu_read_lock() in the rmnet_force_unassociate_device()
is removed because it's unnecessary.

5. The fifth patch fixes duplicate MUX ID case.
RMNET MUX ID is unique.
So, rmnet interface isn't allowed to be created, which have
a duplicate MUX ID.
But, only rmnet_newlink() checks this condition, rmnet_changelink()
doesn't check this.
So, duplicate MUX ID case would happen.

6. The sixth patch fixes upper/lower interface relationship problems.
When IFLA_LINK is used, the upper/lower infrastructure should be used.
Because it checks the maximum depth of upper/lower interfaces and it also
checks circular interface relationship, etc.
In this patch, netdev_upper_dev_link() is used.

7. The seventh patch fixes bridge related problems.
a) ->ndo_del_slave() doesn't work.
b) It couldn't detect circular upper/lower interface relationship.
c) It couldn't prevent stack overflow because of too deep depth
of upper/lower interface
d) It doesn't check the number of lower interfaces.
e) Panics because of several reasons.
These problems are actually the same problem.
So, this patch fixes these problems.

8. The eighth patch fixes packet forwarding issue in bridge mode
Packet forwarding is not working in rmnet bridge mode.
Because when a packet is forwarded, skb_push() for an ethernet header
is needed. But it doesn't call skb_push().
So, the ethernet header will be lost.

Change log:
 - update commit logs.
 - drop two patches in this patchset because of wrong target branch.
   - ("net: rmnet: add missing module alias")
   - ("net: rmnet: print error message when command fails")
 - remove unneessary rcu_read_lock() in the third patch.
 - use rcu_dereference_bh() instead of rcu_dereference in third patch.
 - do not allow to add a bridge device if rmnet interface is already
   bridge mode in the seventh patch.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      795c03a5
    • Taehee Yoo's avatar
      net: rmnet: fix packet forwarding in rmnet bridge mode · ad3cc31b
      Taehee Yoo authored 
      Packet forwarding is not working in rmnet bridge mode.
Because when a packet is forwarded, skb_push() for an ethernet header
is needed. But it doesn't call skb_push().
So, the ethernet header will be lost.

Test commands:
    modprobe rmnet
    ip netns add nst
    ip netns add nst2
    ip link add veth0 type veth peer name veth1
    ip link add veth2 type veth peer name veth3
    ip link set veth1 netns nst
    ip link set veth3 netns nst2

    ip link add rmnet0 link veth0 type rmnet mux_id 1
    ip link set veth2 master rmnet0
    ip link set veth0 up
    ip link set veth2 up
    ip link set rmnet0 up
    ip a a 192.168.100.1/24 dev rmnet0

    ip netns exec nst ip link set veth1 up
    ip netns exec nst ip a a 192.168.100.2/24 dev veth1
    ip netns exec nst2 ip link set veth3 up
    ip netns exec nst2 ip a a 192.168.100.3/24 dev veth3
    ip netns exec nst2 ping 192.168.100.2

Fixes: 60d58f97 ("net: qualcomm: rmnet: Implement bridge mode")
Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ad3cc31b
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7