The fixes the race condition between configuring SR-IOV and devlink
reload.  The SR-IOV configure logic already takes the RTNL lock,
setting sriov_cfg under the lock while changes are underway. Extend
the lock scope in devlink driver_reinit to cover the VF check and
don't run concurrently with SR-IOV configure.
Reported-by: Leon Romanovsky <leon@kernel.org>
Fixes: 228ea8c1 ("bnxt_en: implement devlink dev reload driver_reinit")
Cc: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix build error and warnings reported by kernel test robot:

drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_probe':
drivers/net/ethernet/lantiq_etop.c:673:15: error: implicit declaration of function 'device_property_read_u32' [-Werror=implicit-function-declaration]
     673 |         err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);

   drivers/net/ethernet/lantiq_etop.c: At top level:
   drivers/net/ethernet/lantiq_etop.c:730:1: warning: no previous prototype for 'init_ltq_etop' [-Wmissing-prototypes]
     730 | init_ltq_etop(void)

   drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
   drivers/net/ethernet/lantiq_etop.c:276:25: warning: ignoring return value of 'request_irq' declared with attribute 'warn_unused_result' [-Wunused-result]
     276 |                         request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
   drivers/net/ethernet/lantiq_etop.c:284:25: warning: ignoring return value of 'request_irq' declared with attribute 'warn_unused_result' [-Wunused-result]
     284 |                         request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);

Fixes: 14d4e308 ("net: lantiq: configure the burst length in ethernet drivers")
Fixes: dddb29e4 ("net: lantiq_etop: remove deprecated IRQF_DISABLED")
Fixes: 504d4721 ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202111090621.yjr9xuVj-lkp@intel.com
To: netdev@vger.kernel.org
Cc: Aleksander Jan Bajkowski <olek2@wp.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This bug report shows up when running our research tools. The
reports is SOOB read, but it seems SOOB write is also possible
a few lines below.

In details, fw.len and sw.len are inputs coming from io. A len
over the size of self->rpc triggers SOOB. The patch fixes the
bugs by adding sanity checks.

The bugs are triggerable with compromised/malfunctioning devices.
They are potentially exploitable given they first leak up to
0xffff bytes and able to overwrite the region later.

The patch is tested with QEMU emulater.
This is NOT tested with a real device.

Attached is the log we found by fuzzing.

BUG: KASAN: slab-out-of-bounds in
	hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
Read of size 4 at addr ffff888016260b08 by task modprobe/213
CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 __kasan_report.cold+0x37/0x7c
 ? aq_hw_read_reg_bit+0x60/0x70 [atlantic]
 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 kasan_report+0xe/0x20
 hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic]
 hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic]
 hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic]
 ? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic]
 ? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic]
 hw_atl_utils_initfw+0x12a/0x1c8 [atlantic]
 aq_nic_ndev_register+0x88/0x650 [atlantic]
 ? aq_nic_ndev_init+0x235/0x3c0 [atlantic]
 aq_pci_probe+0x731/0x9b0 [atlantic]
 ? aq_pci_func_init+0xc0/0xc0 [atlantic]
 local_pci_probe+0xd3/0x160
 pci_device_probe+0x23f/0x3e0
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Smatch says:
	bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
	warn: variable dereferenced before check 'ilt' (see line 638)

Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.

Fixes: 523224a3 ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SMC fallback is incomplete currently. There may be some
wait queue entries remaining in smc socket->wq, which should
be removed to clcsocket->wq during the fallback.

For example, in nginx/wrk benchmark, this issue causes an
all-zeros test result:

server: nginx -g 'daemon off;'
client: smc_run wrk -c 1 -t 1 -d 5 http://11.200.15.93/index.html

  Running 5s test @ http://11.200.15.93/index.html
     1 threads and 1 connections
     Thread Stats   Avg      Stdev     Max   ± Stdev
     	Latency     0.00us    0.00us   0.00us    -nan%
	Req/Sec     0.00      0.00     0.00      -nan%
	0 requests in 5.00s, 0.00B read
     Requests/sec:      0.00
     Transfer/sec:       0.00B

The reason for this all-zeros result is that when wrk used SMC
to replace TCP, it added an eppoll_entry into smc socket->wq
and expected to be notified if epoll events like EPOLL_IN/
EPOLL_OUT occurred on the smc socket.

However, once a fallback occurred, wrk switches to use clcsocket.
Now it is clcsocket->wq instead of smc socket->wq which will
be woken up. The eppoll_entry remaining in smc socket->wq does
not work anymore and wrk stops the test.

This patch fixes this issue by removing remaining wait queue
entries from smc socket->wq to clcsocket->wq during the fallback.

Link: https://www.spinics.net/lists/netdev/msg779769.htmlSigned-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: HOLB register write fixes

This small series fixes two recently identified bugs related to the
way two registers must be written.  The registers define whether and
when to drop packets if a head-of-line blocking condition is
encountered.  The "enable" (dropping packets) register must be
written twice for newer versions of hardware.  And the timer
register must not be written while dropping is enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The head-of-line blocking timer should only be modified when
head-of-line drop is disabled.

One of the steps in recovering from a modem crash is to enable
dropping of packets with timeout of 0 (immediate).  We don't know
how the modem configured its endpoints, so before we program the
timer, we need to ensure HOL_BLOCK is disabled.

Fixes: 84f9bd12 ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Starting with IPA v4.5, the HOL_BLOCK_EN register must be written
twice when enabling head-of-line blocking avoidance.

Fixes: 84f9bd12 ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the follow smatch warning:

./include/linux/skbuff.h:4229 skb_remcsum_process() warn: inconsistent
indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
 Drivers that use NETIF_F_LLTX flag must also update
 netdev_queue->trans_start. If they do not, then the ARP monitor will
 immediately fail any slaves using that driver, and those slaves will stay
 down.

Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operationSigned-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some functions, like tipc_crypto_start use inconsisten GFP flags
when allocating memory. The mentioned function use GFP_ATOMIC to
to alloc a crypto instance, and then calls alloc_ordered_workqueue()
which allocates memory with GFP_KERNEL. tipc_aead_init() function
even uses GFP_KERNEL and GFP_ATOMIC interchangeably.
No doc comment specifies what context a function is designed to
work in, but the flags should at least be consistent within a function.

Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: tipc-discussion@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch reverts two prior patches, e7310c94
("security: implement sctp_assoc_established hook in selinux") and
7c2ef024 ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation.  Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.

Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel.  In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP Receive zerocopy iterates through the SKB queue via
tcp_recv_skb(), acquiring a pointer to an SKB and an offset within
that SKB to read from. From there, it iterates the SKB frags array to
determine which offset to start remapping pages from.

However, this is built on the assumption that the offset read so far
within the SKB is smaller than the SKB length. If this assumption is
violated, we can attempt to read an invalid frags array element, which
would cause a fault.

tcp_recv_skb() can cause such an SKB to be returned when the TCP FIN
flag is set. Therefore, we must guard against this occurrence inside
skb_advance_frag().

One way that we can reproduce this error follows:
1) In a receiver program, call getsockopt(TCP_ZEROCOPY_RECEIVE) with:
char some_array[32 * 1024];
struct tcp_zerocopy_receive zc = {
  .copybuf_address  = (__u64) &some_array[0],
  .copybuf_len = 32 * 1024,
};

2) In a sender program, after a TCP handshake, send the following
sequence of packets:
  i) Seq = [X, X+4000]
  ii) Seq = [X+4000, X+5000]
  iii) Seq = [X+4000, X+5000], Flags = FIN | URG, urgptr=1000

(This can happen without URG, if we have a signal pending, but URG is
a convenient way to reproduce the behaviour).

In this case, the following event sequence will occur on the receiver:

tcp_zerocopy_receive():
-> receive_fallback_to_copy() // copybuf_len >= inq
-> tcp_recvmsg_locked() // reads 5000 bytes, then breaks due to URG
-> tcp_recv_skb() // yields skb with skb->len == offset
-> tcp_zerocopy_set_hint_for_skb()
-> skb_advance_to_frag() // will returns a frags ptr. >= nr_frags
-> find_next_mappable_frag() // will dereference this bad frags ptr.

With this patch, skb_advance_to_frag() will no longer return an
invalid frags pointer, and will return NULL instead, fixing the issue.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Link: https://lore.kernel.org/r/20211111235215.2605384-1-arjunroy.kdev@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A space has snuck in.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 74fad215 ("ethernet: sis900: use eth_hw_addr_set()")
Link: https://lore.kernel.org/r/20211111210824.676201-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The source group count was mistakenly assigned to both dst and src loops.
Fix it to make IPA probe and work again.

Fixes: 4fd704b3 ("net: ipa: record number of groups in data")
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20211111183724.593478-1-konrad.dybcio@somainline.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit a985442f ("selftests: net: properly support IPv6 in GSO GRE test")
is not compatible with:

  Ncat: Version 7.80 ( https://nmap.org/ncat )

(which is distributed with Fedora/Red Hat), tests fail with:

  nc: invalid option -- 'N'

Let's switch to socat which is far more dependable.

Fixes: 025efa0a ("selftests: add simple GSO GRE test")
Fixes: a985442f ("selftests: net: properly support IPv6 in GSO GRE test")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Link: https://lore.kernel.org/r/20211111162929.530470-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Do not use "/**" to begin a comment that is not in kernel-doc format.

Prevents this docs build warning:

drivers/ptp/ptp_clockmatrix.c:1679: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * Maximum absolute value for write phase offset in picoseconds

Then remove the kernel-doc-like function parameter descriptions
since they don't add any useful info. (suggested by Jakub)

Fixes: 794c3dff ("ptp: ptp_clockmatrix: Add support for FW 5.2 (8A34005)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20211111155034.29153-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The former patch "defer 6pack kfree after unregister_netdev" reorders
the kfree of two buffer after the unregister_netdev to prevent the race
condition. It also adds free_netdev() function in sixpack_close(), which
is a direct copy from the similar code in mkiss_close().

However, in sixpack driver, the flag needs_free_netdev is set to true in
sp_setup(), hence the unregister_netdev() will free the netdev
automatically. Therefore, as the sp is netdev_priv, use-after-free
occurs.

This patch removes the needs_free_netdev = true and just let the
free_netdev to finish this deallocation task.

Fixes: 0b911192 ("hamradio: defer 6pack kfree after unregister_netdev")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull crypto fix from Herbert Xu:
 "This fixes a boot crash regression"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: api - Fix boot-up crash when crypto manager is disabled

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code but it also has two driver updates: ufs and qla2xxx"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  scsi: scsi_debug: Don't call kcalloc() if size arg is zero
  scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
  scsi: scsi_ioctl: Validate command size
  scsi: ufs: ufshpb: Properly handle max-single-cmd
  scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
  scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
  scsi: sr: Remove duplicate assignment
  scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
  scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
  scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
  scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
  scsi: ufs: ufs-exynos: Factor out priv data init
  scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
  scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
  scsi: ufs: ufs-exynos: Add setup_clocks callback
  scsi: ufs: ufs-exynos: Add refclkout_stop control
  scsi: ufs: ufs-exynos: Simplify drv_data retrieval
  scsi: ufs: ufs-exynos: Change pclk available max value
  scsi: ufs: Add quirk to enable host controller without PH configuration
  scsi: ufs: Add quirk to handle broken UIC command
  ...

Merge tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set is mostly small fixes and cleanups, so more of a janitorial
  update for this cycle"

* tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific
  dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings
  dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings
  pwm: pwm-samsung: Trigger manual update when disabling PWM
  pwm: visconti: Simplify using devm_pwmchip_add()
  pwm: samsung: Describe driver in Kconfig
  pwm: Make it explicit that pwm_apply_state() might sleep
  pwm: Add might_sleep() annotations for !CONFIG_PWM API functions
  pwm: atmel: Drop unused header

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for 5.16-rc1, notably for a few regressions that
  were found in 5.15 and pre-rc1:

   - revert of the unification of SG-buffer helper functions on x86 and
     the relevant fix

   - regression fixes for mmap after the recent code refactoring

   - two NULL dereference fixes in HD-audio controller driver

   - UAF fixes in ALSA timer core

   - a few usual HD-audio and FireWire quirks"

* tag 'sound-fix-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fireworks: add support for Loud Onyx 1200f quirk
  ALSA: hda: fix general protection fault in azx_runtime_idle
  ALSA: hda: Free card instance properly at probe errors
  ALSA: hda/realtek: Add quirk for HP EliteBook 840 G7 mute LED
  ALSA: memalloc: Remove a stale comment
  ALSA: synth: missing check for possible NULL after the call to kstrdup
  ALSA: memalloc: Use proper SG helpers for noncontig allocations
  ALSA: pci: rme: Fix unaligned buffer addresses
  ALSA: firewire-motu: add support for MOTU Track 16
  ALSA: PCM: Fix NULL dereference at mmap checks
  ALSA: hda/realtek: Add quirk for ASUS UX550VE
  ALSA: timer: Unconditionally unlink slave instances, too
  ALSA: memalloc: Catch call with NULL snd_dma_buffer pointer
  Revert "ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type"
  ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54N
  ALSA: firewire-motu: add support for MOTU Traveler mk3
  ALSA: hda/realtek: Headset fixup for Clevo NH77HJQ
  ALSA: timer: Fix use-after-free problem

Pull more drm updates from Dave Airlie:
 "I missed a drm-misc-next pull for the main pull last week. It wasn't
  that major and isn't the bulk of this at all. This has a bunch of
  fixes all over, a lot for amdgpu and i915.

  bridge:
   - HPD improvments for lt9611uxc
   - eDP aux-bus support for ps8640
   - LVDS data-mapping selection support

  ttm:
   - remove huge page functionality (needs reworking)
   - fix a race condition during BO eviction

  panels:
   - add some new panels

  fbdev:
   - fix double-free
   - remove unused scrolling acceleration
   - CONFIG_FB dep improvements

  locking:
   - improve contended locking logging
   - naming collision fix

  dma-buf:
   - add dma_resv_for_each_fence iterator
   - fix fence refcounting bug
   - name locking fixesA

  prime:
   - fix object references during mmap

  nouveau:
   - various code style changes
   - refcount fix
   - device removal fixes
   - protect client list with a mutex
   - fix CE0 address calculation

  i915:
   - DP rates related fixes
   - Revert disabling dual eDP that was causing state readout problems
   - put the cdclk vtables in const data
   - Fix DVO port type for older platforms
   - Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
   - CCS FBs related fixes
   - Fix recursive lock in GuC submission
   - Revert guc_id from i915_request tracepoint
   - Build fix around dmabuf

  amdgpu:
   - GPU reset fix
   - Aldebaran fix
   - Yellow Carp fixes
   - DCN2.1 DMCUB fix
   - IOMMU regression fix for Picasso
   - DSC display fixes
   - BPC display calculation fixes
   - Other misc display fixes
   - Don't allow partial copy from user for DC debugfs
   - SRIOV fixes
   - GFX9 CSB pin count fix
   - Various IP version check fixes
   - DP 2.0 fixes
   - Limit DCN1 MPO fix to DCN1

  amdkfd:
   - SVM fixes
   - Fix gfx version for renoir
   - Reset fixes

  udl:
   - timeout fix

  imx:
   - circular locking fix

  virtio:
   - NULL ptr deref fix"

* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
  drm/ttm: Double check mem_type of BO while eviction
  drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
  drm/amdgpu: drop jpeg IP initialization in SRIOV case
  drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
  drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
  drm/amd/display: Don't lock connection_mutex for DMUB HPD
  drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
  drm/amdkfd: Fix retry fault drain race conditions
  drm/amdkfd: lower the VAs base offset to 8KB
  drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
  drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
  drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
  drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
  drm/i915/fb: Fix rounding error in subsampled plane size calculation
  drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
  drm/locking: fix __stack_depot_* name conflict
  drm/virtio: Fix NULL dereference error in virtio_gpu_poll
  drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
  drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
  drm/amd/amdkfd: Don't sent command to HWS on kfd reset
  ...

Pull input updates from Dmitry Torokhov:
 "Just one new driver (Cypress StreetFighter touchkey), and no input
  core changes this time.

  Plus various fixes and enhancements to existing drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: iforce - fix control-message timeout
  Input: wacom_i2c - use macros for the bit masks
  Input: ili210x - reduce sample period to 15ms
  Input: ili210x - improve polled sample spacing
  Input: ili210x - special case ili251x sample read out
  Input: elantench - fix misreporting trackpoint coordinates
  Input: synaptics-rmi4 - Fix device hierarchy
  Input: i8042 - Add quirk for Fujitsu Lifebook T725
  Input: cap11xx - add support for cap1206
  Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
  Input: ili210x - add ili251x firmware update support
  Input: ili210x - export ili251x version details via sysfs
  Input: ili210x - use resolution from ili251x firmware
  Input: pm8941-pwrkey - respect reboot_mode for warm reset
  reboot: export symbol 'reboot_mode'
  Input: max77693-haptic - drop unneeded MODULE_ALIAS
  Input: cpcap-pwrbutton - do not set input parent explicitly
  Input: max8925_onkey - don't mark comment as kernel-doc
  Input: ads7846 - do not attempt IRQ workaround when deferring probe
  Input: ads7846 - use input_set_capability()
  ...

Pull RTC updates from Alexandre Belloni:
 "This includes new ioctls to get and set parameters and in particular
  the backup switch mode that is needed for some RTCs to actually enable
  the backup voltage (and have a useful RTC).

  The same interface can also be used to get the actual features
  supported by the RTC so userspace has a better way than trying and
  failing.

  Summary:

  Subsystem:
   - Add new ioctl to get and set extra RTC parameters, this includes
     backup switch mode
   - Expose available features to userspace, in particular, when alarmas
     have a resolution of one minute instead of a second.
   - Let the core handle those alarms with a minute resolution

  New driver:
   - MSTAR MSC313 RTC

  Drivers:
   - Add SPI ID table where necessary
   - Add BSM support for rv3028, rv3032 and pcf8523
   - s3c: set RTC range
   - rx8025: set range, implement .set_offset and .read_offset"

* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: rx8025: use .set_offset/.read_offset
  rtc: rx8025: use rtc_add_group
  rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
  rtc: rx8025: set range
  rtc: rx8025: let the core handle the alarm resolution
  rtc: rx8025: switch to devm_rtc_allocate_device
  rtc: ab8500: let the core handle the alarm resolution
  rtc: ab-eoz9: support UIE when available
  rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
  rtc: rv3032: let the core handle the alarm resolution
  rtc: s35390a: let the core handle the alarm resolution
  rtc: handle alarms with a minute resolution
  rtc: pcf85063: silence cppcheck warning
  rtc: rv8803: fix writing back ctrl in flag register
  rtc: s3c: Add time range
  rtc: s3c: Extract read/write IO into separate functions
  rtc: s3c: Remove usage of devm_rtc_device_register()
  rtc: tps80031: Remove driver
  rtc: sun6i: Allow probing without an early clock provider
  rtc: pcf8523: add BSM support
  ...

Pull more libata updates from Damien Le Moal:
 "Second round of updates for libata for 5.16:

   - Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
     revalidation after a resume or a modprobe of the LLDD (me)

   - Remove unnecessary error message in sata_highbank driver (Xu)

   - Better handling of accesses to the IDENTIFY DEVICE data log for
     drives that do not support this log page (me)

   - Fix ahci_shost_attr_group declaration in ahci driver (me)"

* tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  libata: libahci: declare ahci_shost_attr_group as static
  libata: add horkage for missing Identify Device log
  ata: sata_highbank: Remove unnecessary print function dev_err()
  libata: fix read log timeout value

TL;DR: While a tool like liblockdep is useful, it probably doesn't
belong within the kernel tree.

liblockdep attempts to reuse kernel code both directly (by directly
building the kernel's lockdep code) as well as indirectly (by using
sanitized headers). This makes liblockdep an integral part of the
kernel.

It also makes liblockdep quite unique: while other userspace code might
use sanitized headers, it generally doesn't attempt to use kernel code
directly which means that changes on the kernel side of things don't
affect (and break) it directly.

All our workflows and tooling around liblockdep don't support this
uniqueness. Changes that go into the kernel code aren't validated to not
break in-tree userspace code.

liblockdep ended up being very fragile, breaking over and over, to the
point that living in the same tree as the lockdep code lost most of it's
value.

liblockdep should continue living in an external tree, syncing with
the kernel often, in a controllable way.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit aeb58c86 ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.

That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access.  Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.

It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.

The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.

So just add the include for the 'io-64-nonatomic-lo-hi.h' version.

Fixes: aeb58c86 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prepare input updates for 5.16 merge window.

 * dma-buf: name_lock fixes
 * prime: Keep object ref during mmap
 * nouveau: Fix a refcount issue; Fix device removal; Protect client
   list with dedicated mutex; Fix address CE0 address calculation
 * ttm: Fix race condition during BO eviction
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YYzY6jeox9EeI15i@linux-uq9g.fritz.box

I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.

Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull PCI fixes from Bjorn Helgaas:
 "Revert conversion to struct device.driver instead of struct
  pci_dev.driver.

  The device.driver is set earlier, and using it caused the PCI core to
  call driver PM entry points before .probe() and after .remove(), when
  the driver isn't prepared.

  This caused NULL pointer dereferences in i2c_designware_pci and
  probably other driver issues"

* tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"
  Revert "PCI: Remove struct pci_dev->driver"

ahci_shost_attr_group is referenced only in drivers/ata/libahci.c.
Declare it as static.

Fixes: c3f69c7f ("scsi: ata: Switch to attribute groups")
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.

Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull KCSAN updates from Paul McKenney:
 "This contains initialization fixups, testing improvements, addition of
  instruction pointer to data-race reports, and scoped data-race checks"

* tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: selftest: Cleanup and add missing __init
  kcsan: Move ctx to start of argument list
  kcsan: Support reporting scoped read-write access type
  kcsan: Start stack trace with explicit location if provided
  kcsan: Save instruction pointer for scoped accesses
  kcsan: Add ability to pass instruction pointer of access to reporting
  kcsan: test: Fix flaky test case
  kcsan: test: Use kunit_skip() to skip tests
  kcsan: test: Defer kcsan_test_init() after kunit initialization

Merge tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Features
   - use per file locks for transactional queries
   - update policy management capability checks to work with LSM stacking

  Bug Fixes:
   - check/put label on apparmor_sk_clone_security()
   - fix error check on update of label hname
   - fix introspection of of task mode for unconfined tasks

  Cleanups:
   - avoid -Wempty-body warning
   - remove duplicated 'Returns:' comments
   - fix doc warning
   - remove unneeded one-line hook wrappers
   - use struct_size() helper in kzalloc()
   - fix zero-length compiler warning in AA_BUG()
   - file.h: delete duplicated word
   - delete repeated words in comments
   - remove repeated declaration"

* tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: remove duplicated 'Returns:' comments
  apparmor: remove unneeded one-line hook wrappers
  apparmor: Use struct_size() helper in kzalloc()
  apparmor: fix zero-length compiler warning in AA_BUG()
  apparmor: use per file locks for transactional queries
  apparmor: fix doc warning
  apparmor: Remove the repeated declaration
  apparmor: avoid -Wempty-body warning
  apparmor: Fix internal policy capable check for policy management
  apparmor: fix error check
  security: apparmor: delete repeated words in comments
  security: apparmor: file.h: delete duplicated word
  apparmor: switch to apparmor to internal capable check for policy management
  apparmor: update policy capable checks to use a label
  apparmor: fix introspection of of task mode for unconfined tasks
  apparmor: check/put label on apparmor_sk_clone_security()

Merge more updates from Andrew Morton:
 "The post-linux-next material.

  7 patches.

  Subsystems affected by this patch series (all mm): debug,
  slab-generic, migration, memcg, and kasan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: add kasan mode messages when kasan init
  mm: unexport {,un}lock_page_memcg
  mm: unexport folio_memcg_{,un}lock
  mm/migrate.c: remove MIGRATE_PFN_LOCKED
  mm: migrate: simplify the file-backed pages validation when migrating its mapping
  mm: allow only SLUB on PREEMPT_RT
  mm/page_owner.c: modify the type of argument "order" in some functions

Pull m68knommu updates from Greg Ungerer:
 "Only two changes.

  One removes the now unused CONFIG_MCPU32 symbol. The other sets a
  default for the CONFIG_MEMORY_RESERVE config symbol (this aids
  scripting and other automation) so you don't interactively get asked
  for a value at configure time.

  Summary:

   - remove unused CONFIG_MCPU32 symbol

   - default CONFIG_MEMORY_RESERVE value (for scripting)"

* tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Remove MCPU32 config symbol
  m68k: set a default value for MEMORY_RESERVE

This reverts commit 2a4d9408.

Robert reported a NULL pointer dereference caused by the PCI core
(local_pci_probe()) calling the i2c_designware_pci driver's
.runtime_resume() method before the .probe() method.  i2c_dw_pci_resume()
depends on initialization done by i2c_dw_pci_probe().

Prior to 2a4d9408 ("PCI: Use to_pci_driver() instead of
pci_dev->driver"), pci_pm_runtime_resume() avoided calling the
.runtime_resume() method because pci_dev->driver had not been set yet.

2a4d9408 and b5f9c644 ("PCI: Remove struct pci_dev->driver"),
removed pci_dev->driver, replacing it by device->driver, which *has* been
set by this time, so pci_pm_runtime_resume() called the .runtime_resume()
method when it previously had not.

Fixes: 2a4d9408 ("PCI: Use to_pci_driver() instead of pci_dev->driver")
Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit b5f9c644.

Revert b5f9c644 ("PCI: Remove struct pci_dev->driver"), which is needed
to revert 2a4d9408 ("PCI: Use to_pci_driver() instead of
pci_dev->driver").

2a4d9408 caused a NULL pointer dereference reported by Robert Święcki.
Details in the revert of that commit.

Fixes: 2a4d9408 ("PCI: Use to_pci_driver() instead of pci_dev->driver")
Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>