- 20 Apr, 2016 40 commits
-
-
Yoshihiro Shimoda authored
commit 6490865c upstream. This patch adds a code to surely disable TX IRQ of the pipe before starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs may happen in rare cases when DMAC is used. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yoshihiro Shimoda authored
commit 894f2fc4 upstream. When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by:
-
Michal Kazior authored
commit 2a58d42c upstream. The driver can access the queue simultanously while mac80211 tears down the interface. Without spinlock protection this could lead to corrupting sk_buff_head and subsequently to an invalid pointer dereference. Fixes: ba8c3d6f ("mac80211: add an intermediate software queue implementation") Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Michal Kazior authored
commit cf440128 upstream. The ieee80211_queue_stopped() expects hw queue number but it was given raw WMM AC number instead. This could cause frame drops and problems with traffic in some cases - most notably if driver doesn't map AC numbers to queue numbers 1:1 and uses ieee80211_stop_queues() and ieee80211_wake_queue() only without ever calling ieee80211_wake_queues(). On ath10k it was possible to hit this problem in the following case: 1. wlan0 uses queue 0 (ath10k maps queues per vif) 2. offchannel uses queue 15 3. queues 1-14 are unused 4. ieee80211_stop_queues() 5. ieee80211_wake_queue(q=0) 6. ieee80211_wake_queue(q=15) (other queues are not woken up because both driver and mac80211 know other queues are unused) 7. ieee80211_rx_h_mesh_fwding() 8. ieee80211_select_queue_80211() returns 2 9. ieee80211_queue_stopped(q=2) returns true 10. frame is dropped (oops!) Fixes: d3c1597b ("mac80211: fix forwarded mesh frame queue mapping") Signed-off-by:
-
Sara Sharon authored
commit d321cd01 upstream. When joining IBSS a full scan should be initiated in order to search for existing cell, unless the fixed_channel parameter was set. A default channel to create the IBSS on if no cell was found is provided as well. However - a scan is initiated only on the default channel provided regardless of whether ifibss->fixed_channel is set or not, with the obvious result of the cell not joining existing IBSS cell that is on another channel. Fixes: 76bed0f4 ("mac80211: IBSS fix scan request") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0ef049dc upstream. When CONFIG_OPTIMIZE_INLINING is set, the sta_info_insert_finish function consumes more stack than normally, exceeding the 1024 byte limit on ARM: net/mac80211/sta_info.c: In function 'sta_info_insert_finish': net/mac80211/sta_info.c:561:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] It turns out that there are two functions that put a 'struct station_info' on the stack: __sta_info_destroy_part2 and sta_info_insert_finish, and this structure alone requires up to 792 bytes. Hoping that both are called rarely enough, this replaces the on-stack structure with a dynamic allocation, which unfortunately requires some suboptimal error handling for out-of-memory. The __sta_info_destroy_part2 function is actually affected by the stack usage twice because it calls cfg80211_del_sta_sinfo(), which has another instance of struct station_info on its stack. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 98b62183 ("mac80211/cfg80211: add station events") Fixes: 6f7a8d26 ("mac80211: send statistics with delete station event") Signed-off-by:
-
Johannes Berg authored
commit 62b14b24 upstream. The original hand-implemented hash-table in mac80211 couldn't result in insertion errors, and while converting to rhashtable I evidently forgot to check the errors. This surfaced now only because Ben is adding many identical keys and that resulted in hidden insertion errors. Fixes: 7bedd0cf ("mac80211: use rhashtable for station table") Reported-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit 05dbcb43 upstream. The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David Disseldorp authored
commit 2224d879 upstream. As of 5a60e876, RBD object request allocations are made via rbd_obj_request_create() with GFP_NOIO. However, subsequent OSD request allocations in rbd_osd_req_create*() use GFP_ATOMIC. With heavy page cache usage (e.g. OSDs running on same host as krbd client), rbd_osd_req_create() order-1 GFP_ATOMIC allocations have been observed to fail, where direct reclaim would have allowed GFP_NOIO allocations to succeed. Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Manuel Lauss authored
commit e34b6fcf upstream. remove the usage of removed irq_to_gpio() function. On pre-DB1200 boards, pass the actual carddetect GPIO number instead of the IRQ, because we need the gpio to actually test card status (inserted or not) and can get the irq number with gpio_to_irq() instead. Tested on DB1300 and DB1500, this patch fixes PCMCIA on the DB1500, which used irq_to_gpio(). Fixes: 832f5dac ("MIPS: Remove all the uses of custom gpio.h") Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: linux-pcmcia@lists.infradead.org Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/12747/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Laurent Pinchart authored
commit f6acfcdc upstream. Commit 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") refactored the stream start code and removed the SRU CTRL0 register write by mistake. Add it back. Fixes: 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Philipp Zabel authored
commit bc717d5e upstream. If we bail out this early, v4l2_device_register() has not been called yet, so no need to call v4l2_device_unregister(). Fixes: b7bd660a ("[media] coda: Call v4l2_device_unregister() from a single location") Reported-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit e8e3039f upstream. The au0828 dev_state is actually a bit mask. It should not be checking with "==" but, instead, with a logic and. There are some places where it was doing it wrong. Fix that by replacing the dev_state set/clear/test with the bitops. As reviewed by Shuah: "Looks good. Tested running bind/unbind au0828 loop for 1000 times. Didn't see any problems and the v4l2_querycap() problem has been fixed with this patch. After the above test, ran bind/unbind snd_usb_audio 1000 times. Didn't see any problems. Generated media graph and the graph looks good." Reviewed-by:
Shuah Khan <shuahkh@osg.samsung.com> Tested-by:
-
Shuah Khan authored
commit ed940cd2 upstream. au0828_v4l2_close() check for dev_state == DEV_DISCONNECTED will fail to detect the device disconnected state correctly, if au0828_v4l2_open() runs to set the DEV_INITIALIZED bit. A loop test of bind/unbind found this bug by increasing the likelihood of au0828_v4l2_open() occurring while unbind is in progress. When au0828_v4l2_close() fails to detect that the device is in disconnect state, it attempts to power down the device and fails with the following general protection fault: [ 260.992962] Call Trace: [ 260.993008] [<ffffffffa0f80f0f>] ? xc5000_sleep+0x8f/0xd0 [xc5000] [ 260.993095] [<ffffffffa0f6803c>] ? fe_standby+0x3c/0x50 [tuner] [ 260.993186] [<ffffffffa0ef541c>] au0828_v4l2_close+0x53c/0x620 [au0828] [ 260.993298] [<ffffffffa0d08ec0>] v4l2_release+0xf0/0x210 [videodev] [ 260.993382] [<ffffffff81570f9c>] __fput+0x1fc/0x6c0 [ 260.993449] [<ffffffff815714ce>] ____fput+0xe/0x10 [ 260.993519] [<ffffffff8116eb83>] task_work_run+0x133/0x1f0 [ 260.993602] [<ffffffff810035d0>] exit_to_usermode_loop+0x140/0x170 [ 260.993681] [<ffffffff810061ca>] syscall_return_slowpath+0x16a/0x1a0 [ 260.993754] [<ffffffff82835fb3>] entry_SYSCALL_64_fastpath+0xa6/0xa8 Signed-off-by:
-
Vladimir Zapolskiy authored
commit 9a4f4245 upstream. On error path of_iomap() returns NULL, hence IS_ERR() check is invalid and may cause a NULL pointer dereference, the change fixes this problem. While we are here invert a device node check to simplify the code. Fixes: 26d8cde5 ("pinctrl: freescale: imx: add shared input select reg support") Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Linus Walleij authored
commit 6ee33455 upstream. Pull up was reported as pull down and vice versa. Fix this. Fixes: 8f1774a2 "pinctrl: nomadik: improve GPIO debug prints" Signed-off-by:
-
Hans de Goede authored
commit 5e7515ba upstream. pinctrl-sun8i-a33.c (and the dts) declare only 2 interrupt banks, where as the closely related a23 has 3 banks. This matches with the datasheet for the A33 where only interrupt banks B and G are specified where as the A23 has banks A, B and G. However the A33 being the A23 derative it is means that the interrupt configure/status io-addresses for the 2 banks it has are not changed from the A23, iow they have the same address as if bank A was still present. Where as the sunxi pinctrl currently tries to use the A23 bank A addresses for bank B, since the pinctrl code does not know about the removed bank A. Add a irq_bank_base parameter and use this where appropriate to take the missing bank A into account. This fixes external interrupts not working on the A33 (tested with an i2c touchscreen controller which uses an external interrupt). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Wolfram Sang authored
commit 0129801b upstream. If pinctrl_provide_dummies() is used unconditionally, then the dummy state will be used even on DT platforms when the "init" state was intentionally left out. Instead of "default", the dummy "init" state will then be used during probe. Thus, when probing an I2C controller on cold boot, communication triggered by bus notifiers broke because the pins were not initialized. Do it like OMAP2: use the dummy state only for non-DT platforms. Fixes: ef0eebc0 ("drivers/pinctrl: Add the concept of an "init" state") Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
-
Govindraj Raja authored
commit e9adb336 upstream. mfio 84 to 89 are described wrongly, fix it to describe the right pin and add them to right pin-mux group. The correct order is: pll1_lock => mips_pll -- MFIO_83 pll2_lock => audio_pll -- MFIO_84 pll3_lock => rpu_v_pll -- MFIO_85 pll4_lock => rpu_l_pll -- MFIO_86 pll5_lock => sys_pll -- MFIO_87 pll6_lock => wifi_pll -- MFIO_88 pll7_lock => bt_pll -- MFIO_89 Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: James Hartley <James.Hartley@imgtec.com> Fixes: cefc03e5("pinctrl: Add Pistachio SoC pin control driver") Signed-off-by:
Govindraj Raja <Govindraj.Raja@imgtec.com> Acked-by:
Andrew Bresticker <abrestic@chromium.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Paul Burton authored
commit fa8ff601 upstream. Copying the content of an MSA vector from user memory may involve TLB faults & mapping in pages. This will fail when preemption is disabled due to an inability to acquire mmap_sem from do_page_fault, which meant such vector loads to unmapped pages would always fail to be emulated. Fix this by disabling preemption later only around the updating of vector register state. This change does however introduce a race between performing the load into thread context & the thread being preempted, saving its current live context & clobbering the loaded value. This should be a rare occureence, so optimise for the fast path by simply repeating the load if we are preempted. Additionally if the copy failed then the failure path was taken with preemption left disabled, leading to the kernel typically encountering further issues around sleeping whilst atomic. The change to where preemption is disabled avoids this issue. Fixes: e4aa1f15 "MIPS: MSA unaligned memory access support" Reported-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
-
Paolo Bonzini authored
commit 14ebda33 upstream. Windows lets applications choose the frequency of the timer tick, and in Windows 10 the maximum rate was changed from 1024 Hz to 2048 Hz. Unfortunately, because of the way the Windows API works, most applications who need a higher rate than the default 64 Hz will just do timeGetDevCaps(&tc, sizeof(tc)); timeBeginPeriod(tc.wPeriodMin); and pick the maximum rate. This causes very high CPU usage when playing media or games on Windows 10, even if the guest does not actually use the CPU very much, because the frequent timer tick causes halt_poll_ns to kick in. There is no really good solution, especially because Microsoft could sooner or later bump the limit to 4096 Hz, but for now the best we can do is lower a bit the upper limit for halt_poll_ns. :-( Reported-by:
Jon Panozzo <jonp@lime-technology.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Yuki Shibuya authored
commit 321c5658 upstream. Non maskable interrupts (NMI) are preferred to interrupts in current implementation. If a NMI is pending and NMI is blocked by the result of nmi_allowed(), pending interrupt is not injected and enable_irq_window() is not executed, even if interrupts injection is allowed. In old kernel (e.g. 2.6.32), schedule() is often called in NMI context. In this case, interrupts are needed to execute iret that intends end of NMI. The flag of blocking new NMI is not cleared until the guest execute the iret, and interrupts are blocked by pending NMI. Due to this, iret can't be invoked in the guest, and the guest is starved until block is cleared by some events (e.g. canceling injection). This patch injects pending interrupts, when it's allowed, even if NMI is blocked. And, If an interrupts is pending after executing inject_pending_event(), enable_irq_window() is executed regardless of NMI pending counter. Signed-off-by:
Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Suggested-by:
-
Oliver Neukum authored
commit 29c6dd59 upstream. The union descriptor must be checked. Its usage was conditional before the parser was introduced. This is important, because many RNDIS device, which also use the common parser, have bogus extra descriptors. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Tested-by:
Vasily Galkin <galkin-vv@yandex.ru> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hans de Goede authored
commit 13630746 upstream. Add a new NO_REPORT_LUNS quirk and set it for Seagate drives with an usb-id of: 0bc2:331a, as these will fail to respond to a REPORT_LUNS command. Reported-and-tested-by:
David Webb <djw@noc.ac.uk> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Hans de Goede authored
commit 198de51d upstream. Commit 64d513ac ("scsi: use host wide tags by default") causes the SCSI core to queue more commands then we can handle on devices with multiple LUNs, limit the queue depth at the scsi-host level instead of per slave to fix this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1315013Signed-off-by:
-
Roopa Prabhu authored
[ Upstream commit 94a57f1f ] find_outdev calls inet{,6}_fib_lookup_dev() or dev_get_by_index() to find the output device. In case of an error, inet{,6}_fib_lookup_dev() returns error pointer and dev_get_by_index() returns NULL. But the function only checks for NULL and thus can end up calling dev_put on an ERR_PTR. This patch adds an additional check for err ptr after the NULL check. Before: Trying to add an mpls route with no oif from user, no available path to 10.1.1.8 and no default route: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 [ 822.337195] BUG: unable to handle kernel NULL pointer dereference at 00000000000003a3 [ 822.340033] IP: [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] PGD 1db38067 PUD 1de9e067 PMD 0 [ 822.340033] Oops: 0000 [#1] SMP [ 822.340033] Modules linked in: [ 822.340033] CPU: 0 PID: 11148 Comm: ip Not tainted 4.5.0-rc7+ #54 [ 822.340033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 822.340033] task: ffff88001db82580 ti: ffff88001dad4000 task.ti: ffff88001dad4000 [ 822.340033] RIP: 0010:[<ffffffff8148781e>] [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP: 0018:ffff88001dad7a88 EFLAGS: 00010282 [ 822.340033] RAX: ffffffffffffff9b RBX: ffffffffffffff9b RCX: 0000000000000002 [ 822.340033] RDX: 00000000ffffff9b RSI: 0000000000000008 RDI: 0000000000000000 [ 822.340033] RBP: ffff88001ddc9ea0 R08: ffff88001e9f1768 R09: 0000000000000000 [ 822.340033] R10: ffff88001d9c1100 R11: ffff88001e3c89f0 R12: ffffffff8187e0c0 [ 822.340033] R13: ffffffff8187e0c0 R14: ffff88001ddc9e80 R15: 0000000000000004 [ 822.340033] FS: 00007ff9ed798700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 822.340033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 822.340033] CR2: 00000000000003a3 CR3: 000000001de89000 CR4: 00000000000006f0 [ 822.340033] Stack: [ 822.340033] 0000000000000000 0000000100000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000000 0801010a00000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000004 ffffffff8148749b ffffffff8187e0c0 000000000000001c [ 822.340033] Call Trace: [ 822.340033] [<ffffffff8148749b>] ? mpls_rt_alloc+0x2b/0x3e [ 822.340033] [<ffffffff81488e66>] ? mpls_rtm_newroute+0x358/0x3e2 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff813b7d94>] ? rtnetlink_rcv_msg+0x17e/0x191 [ 822.340033] [<ffffffff8111794e>] ? __kmalloc_track_caller+0x8c/0x9e [ 822.340033] [<ffffffff813c9393>] ? rht_key_hashfn.isra.20.constprop.57+0x14/0x1f [ 822.340033] [<ffffffff813b7c16>] ? __rtnl_unlock+0xc/0xc [ 822.340033] [<ffffffff813cb794>] ? netlink_rcv_skb+0x36/0x82 [ 822.340033] [<ffffffff813b4507>] ? rtnetlink_rcv+0x1f/0x28 [ 822.340033] [<ffffffff813cb2b1>] ? netlink_unicast+0x106/0x189 [ 822.340033] [<ffffffff813cb5b3>] ? netlink_sendmsg+0x27f/0x2c8 [ 822.340033] [<ffffffff81392ede>] ? sock_sendmsg_nosec+0x10/0x1b [ 822.340033] [<ffffffff81393df1>] ? ___sys_sendmsg+0x182/0x1e3 [ 822.340033] [<ffffffff810e4f35>] ? __alloc_pages_nodemask+0x11c/0x1e4 [ 822.340033] [<ffffffff8110619c>] ? PageAnon+0x5/0xd [ 822.340033] [<ffffffff811062fe>] ? __page_set_anon_rmap+0x45/0x52 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff810e85ab>] ? __lru_cache_add+0x1a/0x3a [ 822.340033] [<ffffffff81087ea9>] ? current_kernel_time64+0x9/0x30 [ 822.340033] [<ffffffff813940c4>] ? __sys_sendmsg+0x3c/0x5a [ 822.340033] [<ffffffff8148f597>] ? entry_SYSCALL_64_fastpath+0x12/0x6a [ 822.340033] Code: 83 08 04 00 00 65 ff 00 48 8b 3c 24 e8 40 7c f2 ff eb 13 48 c7 c3 9f ff ff ff eb 0f 89 ce e8 f1 ae f1 ff 48 89 c3 48 85 db 74 15 <48> 8b 83 08 04 00 00 65 ff 08 48 81 fb 00 f0 ff ff 76 0d eb 07 [ 822.340033] RIP [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP <ffff88001dad7a88> [ 822.340033] CR2: 00000000000003a3 [ 822.435363] ---[ end trace 98cc65e6f6b8bf11 ]--- After patch: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 RTNETLINK answers: Network is unreachable Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Reported-by:
-
Jakub Sitnicki authored
[ Upstream commit 3ba3458f ] When sending a UDPv6 message longer than MTU, account for the length of fragmentable IPv6 extension headers in skb->network_header offset. Same as we do in alloc_new_skb path in __ip6_append_data(). This ensures that later on __ip6_make_skb() will make space in headroom for fragmentable extension headers: /* move skb->data to ip header from ext header */ if (skb->data < skb_network_header(skb)) __skb_pull(skb, skb_network_offset(skb)); Prevents a splat due to skb_under_panic: skbuff: skb_under_panic: text:ffffffff8143397b len:2126 put:14 \ head:ffff880005bacf50 data:ffff880005bacf4a tail:0x48 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] KASAN CPU: 0 PID: 160 Comm: reproducer Not tainted 4.6.0-rc2 #65 [...] Call Trace: [<ffffffff813eb7b9>] skb_push+0x79/0x80 [<ffffffff8143397b>] eth_header+0x2b/0x100 [<ffffffff8141e0d0>] neigh_resolve_output+0x210/0x310 [<ffffffff814eab77>] ip6_finish_output2+0x4a7/0x7c0 [<ffffffff814efe3a>] ip6_output+0x16a/0x280 [<ffffffff815440c1>] ip6_local_out+0xb1/0xf0 [<ffffffff814f1115>] ip6_send_skb+0x45/0xd0 [<ffffffff81518836>] udp_v6_send_skb+0x246/0x5d0 [<ffffffff8151985e>] udpv6_sendmsg+0xa6e/0x1090 [...] Reported-by:
Ji Jianwen <jiji@redhat.com> Signed-off-by:
Jakub Sitnicki <jkbs@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit b6ee376c ] When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set before ip6_tnl_create2 is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Fixes: 0b112457 ("ip6tnl: add support of link creation via rtnl") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit be447f30 ] pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 5745b823 ] pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by:
-
Jason Wang authored
[ Upstream commit 016adb72 ] After commit f84bb1ea ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1ea ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <phil@nwl.cc> Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 5a5abb1f ] Sasha Levin reported a suspicious rcu_dereference_protected() warning found while fuzzing with trinity that is similar to this one: [ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage! [ 52.765688] other info that might help us debug this: [ 52.765695] rcu_scheduler_active = 1, debug_locks = 1 [ 52.765701] 1 lock held by a.out/1525: [ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20 [ 52.765721] stack backtrace: [ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264 [...] [ 52.765768] Call Trace: [ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8 [ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110 [ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90 [ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun] [ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun] [ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210 [ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun] [ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690 [ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60 [ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90 [ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140 [ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25 Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH, DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices. Since the fix in f91ff5b9 ("net: sk_{detach|attach}_filter() rcu fixes") sk_attach_filter()/sk_detach_filter() now dereferences the filter with rcu_dereference_protected(), checking whether socket lock is held in control path. Since its introduction in 99405162 ("tun: socket filter support"), tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the sock_owned_by_user(sk) doesn't apply in this specific case and therefore triggers the false positive. Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair that is used by tap filters and pass in lockdep_rtnl_is_held() for the rcu_dereference_protected() checks instead. Reported-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit c57c7a95 ] Size of the attribute IFLA_PHYS_PORT_NAME was missing. Fixes: db24a904 ("net: add support for phys_port_name") CC: David Ahern <dsahern@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 5e263f71 ] When NET_SWITCHDEV=n, switchdev_port_attr_set will return -EOPNOTSUPP, we should ignore this error code and continue to set the ageing time. Fixes: c62987bb ("bridge: push bridge setting ageing_time down to switchdev") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2d421226 ] IPv6 counters updates use a different macro than IPv4. Fixes: 36cbb245 ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit e84810c7 ] Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
subashab@codeaurora.org authored
[ Upstream commit 071d36bf ] A crash is observed when a decrypted packet is processed in receive path. get_rps_cpus() tries to dereference the skb->dev fields but it appears that the device is freed from the poison pattern. [<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0 [<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc [<ffffffc000af6094>] netif_rx+0x74/0x94 [<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0 [<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c [<ffffffc000ba6eb8>] esp_input_done+0x20/0x30 [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 [<ffffffc0000bb40c>] kthread+0xe0/0xec -013|get_rps_cpu( | dev = 0xFFFFFFC08B688000, | skb = 0xFFFFFFC0C76AAC00 -> ( | dev = 0xFFFFFFC08B688000 -> ( | name = "...................................................... | name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev = 0xAAAAAAAAAAA Following are the sequence of events observed - - Encrypted packet in receive path from netdevice is queued - Encrypted packet queued for decryption (asynchronous) - Netdevice brought down and freed - Packet is decrypted and returned through callback in esp_input_done - Packet is queued again for process in network stack using netif_rx Since the device appears to have been freed, the dereference of skb->dev in get_rps_cpus() leads to an unhandled page fault exception. Fix this by holding on to device reference when queueing packets asynchronously and releasing the reference on call back return. v2: Make the change generic to xfrm as mentioned by Steffen and update the title to xfrm Suggested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Jerome Stanislaus <jeromes@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 1f461dcd ] Let channels hold a reference on their network namespace. Some channel types, like ppp_async and ppp_synctty, can have their userspace controller running in a different namespace. Therefore they can't rely on them to preclude their netns from being removed from under them. ================================================================== BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at addr ffff880064e217e0 Read of size 8 by task syz-executor/11581 ============================================================================= BUG net_namespace (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906 [< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440 [< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469 [< inline >] slab_alloc_node kernel/mm/slub.c:2532 [< inline >] slab_alloc kernel/mm/slub.c:2574 [< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579 [< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597 [< inline >] net_alloc kernel/net/core/net_namespace.c:325 [< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360 [< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95 [< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150 [< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451 [< inline >] copy_process kernel/kernel/fork.c:1274 [< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723 [< inline >] SYSC_clone kernel/kernel/fork.c:1832 [< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826 [< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185 INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631 [< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650 [< inline >] slab_free kernel/mm/slub.c:2805 [< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814 [< inline >] net_free kernel/net/core/net_namespace.c:341 [< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348 [< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448 [< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036 [< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170 [< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303 [< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468 INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000 flags=0x5fffc0000004080 INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200 CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000 Call Trace: [< inline >] __dump_stack kernel/lib/dump_stack.c:15 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661 [< inline >] print_address_description kernel/mm/kasan/report.c:138 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236 [< inline >] kasan_report kernel/mm/kasan/report.c:259 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280 [< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115 [< inline >] exit_task_work kernel/include/linux/task_work.h:21 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307 [< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692 [< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678 [< inline >] ? context_switch kernel/kernel/sched/core.c:2807 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247 [< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281 Memory state around the buggy address: ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 273ec51d ("net: ppp_generic - introduce net-namespace functionality v2") Reported-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Lance Richardson authored
[ Upstream commit 4cfc86f3 ] Field fl4.flowi4_flags is not initialized in fib_compute_spec_dst() before calling fib_lookup(), which means fib_table_lookup() is using non-deterministic data at this line: if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) { Fix by initializing the entire fl4 structure, which will prevent similar issues as fields are added in the future by ensuring that all fields are initialized to zero unless explicitly initialized to another value. Fixes: 58189ca7 ("net: Fix vti use case with oif in dst lookups") Suggested-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
-
Paolo Abeni authored
[ Upstream commit ad0ea198 ] Currently, ingress ipv4 broadcast datagrams are dropped since, in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on bcast packets. This patch addresses the issue, invoking ip_check_mc_rcu() only for mcast packets. Fixes: 6e540309 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
